Wellfleet-HSSI-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
70
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
RFC1155-SMIHSSI line record SEQUENCE OF WfHssiEntry .1.3.6.1.4.1.18.3.4.7 |
wfHssiEntryAn entry in the HSSI table WfHssiEntry .1.3.6.1.4.1.18.3.4.7.1 |
wfHssiDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.1 |
wfHssiDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.2 |
wfHssiStateLine Driver state variable, Not Present, Init, Down, Upro Enumeration .1.3.6.1.4.1.18.3.4.7.1.3 |
wfHssiSlotInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.7.1.4 |
wfHssiConnectorInstance ID Connector, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.7.1.5 |
wfHssiCctCCT number for this line instancerw INTEGER .1.3.6.1.4.1.18.3.4.7.1.6 |
wfHssiBoflbreath of life parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.7 |
wfHssiBoflTmobreath of life frequency in secondsrw INTEGER .1.3.6.1.4.1.18.3.4.7.1.8 |
wfHssiMtuMTU parameter, this is buffer size for HSSI media, fixedrw INTEGER .1.3.6.1.4.1.18.3.4.7.1.9 |
wfHssiMadrLine MAC address, fixed - line driver fills in from the 48 bit
address stored in the serial number prom for this connector.ro OCTET STRING .1.3.6.1.4.1.18.3.4.7.1.10 |
wfHssiServiceService type for this circuit. Transparent is raw HDLC mode, and is the
only service provided on the current HSSI productrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.11 |
wfHssiWanProtocolWAN protocol selection is provided via this parameter. The
supported protocols can be selected per interface.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.12 |
wfHssiTransmissionInterfaceT1 or T3, in the future OC1, OC3 and OC12. Used for MIB selectionrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.13 |
wfHssiExternalClkSpeedExternal Clock Speed, Used in the future for route selectionrw INTEGER .1.3.6.1.4.1.18.3.4.7.1.14 |
wfHssiCrcSizeCRC size parameter, 16 bit standard CCITT or extended 32 bit CRCrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.15 |
wfHssiInternalClkTestModeEnables internal transmit clock generation. Should NEVER be enabled for
normal operation.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.16 |
wfHssiRxOctetsNumber of bytes received without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.17 |
wfHssiRxFramesNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.18 |
wfHssiTxOctetsNumber of bytes transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.19 |
wfHssiTxFramesNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.20 |
wfHssiInDiscardsNumber of error-free inbound packets discarded. Usually due to lack of
memory resources.ro Counter .1.3.6.1.4.1.18.3.4.7.1.21 |
wfHssiInErrorsNumber of inbound packets not delivered to higher-layer protocol because
of errors.ro Counter .1.3.6.1.4.1.18.3.4.7.1.22 |
wfHssiOutDiscardsNumber of error-free outbound packets discarded. Usually due to lack of
transmission bandwidth.ro Counter .1.3.6.1.4.1.18.3.4.7.1.23 |
wfHssiOutErrorsNumber of outbound packets that could not be transmitted because of
errors.ro Counter .1.3.6.1.4.1.18.3.4.7.1.24 |
wfHssiRxLongFramesNumber of Long frames dropped on receive because of lengthro Counter .1.3.6.1.4.1.18.3.4.7.1.25 |
wfHssiTxClipFramesNumber of frames clipped in the transmit routinero Counter .1.3.6.1.4.1.18.3.4.7.1.26 |
wfHssiRxReplenMissesNumber of failed attempts by the line driver to aquire a packet bufferro Counter .1.3.6.1.4.1.18.3.4.7.1.27 |
wfHssiLastRxErrorCtrlLast errored receive descriptor's control fieldro INTEGER .1.3.6.1.4.1.18.3.4.7.1.28 |
wfHssiRxCrcErrorsNumber of frames received with CRC errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.29 |
wfHssiRxOverrunsNumber of frames received with fifo overrun errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.30 |
wfHssiRxAbortsNumber of frames received with abort statusro Counter .1.3.6.1.4.1.18.3.4.7.1.31 |
wfHssiLastTxErrorCtrlLast errored transmit descriptor's control fieldro INTEGER .1.3.6.1.4.1.18.3.4.7.1.32 |
wfHssiTxAbortsNumber of transmit frames with internal abort errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.33 |
wfHssiTxUnderrunsNumber of transmit frames aborted with underrun errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.34 |
wfHssiRxRingErrorsNumber of receive ring error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.35 |
wfHssiLastRxRingStateLast 8 bit value from the recv ring state registerro INTEGER .1.3.6.1.4.1.18.3.4.7.1.36 |
wfHssiRxRingOverrunsNumber of receive ring overrun eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.37 |
wfHssiTxRingErrorsNumber of transmit ring error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.38 |
wfHssiLastTxRingStateLast 8 bit value from the transmit ring state registerro INTEGER .1.3.6.1.4.1.18.3.4.7.1.39 |
wfHssiPortOpErrorsNumber of port operation error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.40 |
wfHssiInternOpErrorsNumber of internal operation error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.41 |
wfHssiHostErrorsNumber of parity errs on host accesses to directly accessable registers.ro Counter .1.3.6.1.4.1.18.3.4.7.1.42 |
wfHssiRxProcessingsNumber of receive frame processings (RINT)ro Counter .1.3.6.1.4.1.18.3.4.7.1.43 |
wfHssiTxProcessingsNumber of transmit processings, invokations of transmit routinero Counter .1.3.6.1.4.1.18.3.4.7.1.44 |
wfHssiTxCmplProcessingsNumber of transmit complete processings (TINT)ro Counter .1.3.6.1.4.1.18.3.4.7.1.45 |
wfHssiIntrProcessingsNumber of Interrupt processings, invokations of intr routinero Counter .1.3.6.1.4.1.18.3.4.7.1.46 |
wfHssiBoflNumNumber of breath of life packets per breath of liferw INTEGER .1.3.6.1.4.1.18.3.4.7.1.47 |
wfHssiBoflLenbreath of life packet lengthrw INTEGER .1.3.6.1.4.1.18.3.4.7.1.48 |
wfHssiRxBufferLengthPerformance tunning parameter controls Receive buffer size.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.49 |
wfHssiMemPageLengthPerformance tunning parameter controls device memory access burst length.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.50 |
wfHssiRxRingLengthCurrent Receive Queue Length.ro INTEGER .1.3.6.1.4.1.18.3.4.7.1.51 |
wfHssiTxRingLengthCurrent Transmit Queue Length.ro INTEGER .1.3.6.1.4.1.18.3.4.7.1.52 |
wfHssiRxFifoWatermarkPerformance tunning parameter controls the receive watermark.rw INTEGER .1.3.6.1.4.1.18.3.4.7.1.53 |
wfHssiTxFifoWatermarkPerformance tunning parameter controls the transmit watermark.rw INTEGER .1.3.6.1.4.1.18.3.4.7.1.54 |
wfHssiMaxRxMemoryPerformance tunning parameter controls fifo area allowed for receive.rw INTEGER .1.3.6.1.4.1.18.3.4.7.1.55 |
wfHssiLinkInterfaceOnly for DEBUG.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.56 |
wfHssiTurboBoflOnly for DEBUG, Turbo breath of life parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.57 |
wfHssiCfgRxQueueLengthConfigured Receive Queue Length. Values other than zero over-ride the
router selected values. A value of zero has a special meaning. Zero
causes router based default values to be used. Values larger than the
compiled ring size are truncated to the compiled ring size.rw INTEGER .1.3.6.1.4.1.18.3.4.7.1.58 |
wfHssiCfgTxQueueLengthConfigured Transmit Queue Length. Values other than zero over-ride the
router selected values. A value of zero has a special meaning. Zero
causes router based default values to be used. Values larger than the
compiled ring size are truncated to the compiled ring size.rw INTEGER .1.3.6.1.4.1.18.3.4.7.1.59 |
wfHssiLineNumberline number for this line instancerw INTEGER .1.3.6.1.4.1.18.3.4.7.1.60 |
wfHssiCfgCngstCtlEnableConfigured Congestion Control Enable. Enable or disable BNX switch
congestion control on this HSSI port. Note that this has relevance only
in the BNX switch and (currently) Frame Relay and SMDS switching
functionality. If enabled, congestion control will monitor the levels of
traffic and congestion and mark and drop certain packets as per of
Frame Relay or SMDS protocols. See BNX doc for details on the
congestion control strategy.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.61 |
wfHssiLastChangeThe value of SysUpTime at the time the interface entered it's current
operational state (UP state). SysUpTime is defined as the time (in
hundredths of a second) since the network management portion of the
system was last re-initialized. Usually the time since boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.4.7.1.62 |
wfHssiOutQLenThe instantaneous current length of the output packet queue (in packets).ro Gauge .1.3.6.1.4.1.18.3.4.7.1.63 |
wfHssiCarrLossDebounceTmoThis attribute determines how many seconds to wait before
transitioning to the Carrier Lost state when the Carrier Signal
is lost. When set to 0 (default), the Driver will immediately
transition to the lost state upon detecting Carrier Loss. If
the Carrier Signal returns prior to reaching this threshold,
the Driver will not enter the Carrier Lost state at all.rw INTEGER .1.3.6.1.4.1.18.3.4.7.1.64 |
wfHssiModuleModule number for ASN platform, filled in by driver. For
non-ASN platforms this attribute will not be used.ro Enumeration .1.3.6.1.4.1.18.3.4.7.1.65 |
wfHssiActualConnectorActual connector number for ASN platform, filled in
by driver. For non-ASN platforms, this attribute will
not be used.ro Enumeration .1.3.6.1.4.1.18.3.4.7.1.66 |
wfHssiLoopbackLoopback type requested, Local Digital (Loop A), Local Line
(Loop B), Remote Line (Loop C), or nonerw Enumeration .1.3.6.1.4.1.18.3.4.7.1.67 |
wfHssiReceiveAllFramesThis attribute enables delivery of all receive frames to the
HSSI device driver for processing. When disabled, frames
less than 4 bytes in length are filtered out of the receive
frame stream before reaching the device driver.
It is necessary to enable the attribute when running Frame Relay
switched virtual circuits (SVC) in order to allow the reception
of 3 byte frames.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.68 |