Wellfleet-FDDI-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-FDDI-MIB.
152
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
152 total| Object Name |
|---|
wfFddiTableFDDI line record SEQUENCE OF WfFddiEntry .1.3.6.1.4.1.18.3.4.4 |
wfFddiEntryAn entry in the FDDI table WfFddiEntry .1.3.6.1.4.1.18.3.4.4.1 |
wfFDDIDeleteCreate/delete parameter, default = create.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.1 |
wfFDDIEnableEnable/disable parameter, default = enable.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.2 |
wfFDDIStateLine driver state variable, not present, init, down, up.ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.3 |
wfFDDISlotInstance ID slot - filled in by driver.ro INTEGER .1.3.6.1.4.1.18.3.4.4.1.4 |
wfFDDINodeInstance ID node - filled in by driver. For the ASN
this attribute is an encoded value and is equal to
'module'*10 + 'node'. Where 'module' is defined in
attribute 50 and 'node' is defined in attribute 51
of this table. For non-ASN platforms this attribute
indicates the physical node number on the slotro INTEGER .1.3.6.1.4.1.18.3.4.4.1.5 |
wfFDDICctCct number for this line instance.rw INTEGER .1.3.6.1.4.1.18.3.4.4.1.6 |
wfFDDIBoflThe Breath-Of-Life (BOFL) function, when enabled, will disable
the LLC interface when the FDDI becomes non-operational
(i.e., link unavailable) and the following conditions are true:
1. The wfFddiMacMaUnitDataEnable attribute is enabled.
2. The BOFL timer expired (specified by wfFDDIBoflTmo).
If this attribute is disabled, the LLC interface will be
terminated immediately after the link becomes unavailable.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.7 |
wfFDDIBoflTmoSpecifies the time value (in seconds) of the BOFL timer. The BOFL
timer will be set to the value of this attribute when the following
conditions are true:
1. The wfFDDIBofl attribute is enabled.
2. The link becomes unavailable.
Upon expiration of the BOFL timer, the LLC interface will be
disabled.
Note also that the BOFL timer will be disabled if the link becomes
operational (available) before the timer expires..rw INTEGER .1.3.6.1.4.1.18.3.4.4.1.8 |
wfFDDIMtuThe MTU is the maximum allowed frame length on the wire, excluding
frame delimiters (i.e. preamble, ending delimiter).
The MTU of an FDDI frame includes:
FC (1 octet) + DA (6 octets) + SA (6 octets) +
INFO (<= 4478 octets) +
FCS (4 octets) = 4495 octetsro Enumeration .1.3.6.1.4.1.18.3.4.4.1.9 |
wfFDDIMadrPROM-based MAC address, fixed - line driver fills in.ro OCTET STRING .1.3.6.1.4.1.18.3.4.4.1.10 |
wfFDDIOctetsRxOkNumber of bytes received without error. This byte count
only includes LLC frames (i.e. no MAC and SMT frames).ro Counter .1.3.6.1.4.1.18.3.4.4.1.11 |
wfFDDIFramesRxOkNumber of frames received without error. This frame count
only includes LLC frames (i.e. no MAC and SMT frames).ro Counter .1.3.6.1.4.1.18.3.4.4.1.12 |
wfFDDIOctetsTxOkNumber of bytes transmitted without error. This byte count
only includes LLC and SMT frames (i.e. no MAC frames).ro Counter .1.3.6.1.4.1.18.3.4.4.1.13 |
wfFDDIFramesTxOkNumber of frames transmitted without error. This frame count
only includes LLC and SMT frames (i.e. no MAC frames ).ro Counter .1.3.6.1.4.1.18.3.4.4.1.14 |
wfFDDICrcErrRxNumber of frames received with CRC errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.15 |
wfFDDIOverrunRxNumber of frames received with internal overrun errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.16 |
wfFDDIParityErrRxNumber of frames received with parity errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.17 |
wfFDDIMacErrRxNumber of frames received with MAC errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.18 |
wfFDDIRingErrRxNumber of receive ring error events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.19 |
wfFDDISmtRingErrRxNumber of SMT receive ring error events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.20 |
wfFDDIRingOverrunRxNumber of LLC receive ring overrun events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.21 |
wfFDDISmtRingOverrunRxNumber of SMT receive ring overrun events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.22 |
wfFDDIAbortTxNumber of transmit frames with internal abort errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.23 |
wfFDDIUnderrunTxNumber of transmit frames aborted with underrun errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.24 |
wfFDDIParityErrTxNumber of transmit frames aborted with parity errors.ro Counter .1.3.6.1.4.1.18.3.4.4.1.25 |
wfFDDIRingErrTxNumber of LLC/SMT transmit ring error events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.26 |
wfFDDIPortOpErrNumber of port operation error events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.27 |
wfFDDIInternOpErrNumber of internal operation error events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.28 |
wfFDDIHostErrNumber of host error events.ro Counter .1.3.6.1.4.1.18.3.4.4.1.29 |
wfFDDISmtConnectionPolicyA value that indicates the connection policies
enforced at the station. A station sets the
corresponding policy for each of the connection
types that it rejects. The letter designations, X
and Y, in the 'rejectX-Y' names have the following
significance: X represents the PC-Type of the
local PORT and Y represents a PC-Neighbor in the
evaluation of Connection-Policy (PC-Type, PC-
Neighbor) that is done to determine the setting of
T-Val(3) in the PC-Signaling sequence.
The value is a sum. This value initially takes
the value zero, then for each of the connection
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
rejectA-A 0
rejectA-B 1
rejectA-S 2
rejectA-M 3
rejectB-A 4
rejectB-B 5
rejectB-S 6
rejectB-M 7
rejectS-A 8
rejectS-B 9
rejectS-S 10
rejectS-M 11
rejectM-A 12
rejectM-B 13
rejectM-S 14
rejectM-M 15rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.30 |
wfFDDISmtTNotifyThe timer used in the Neighbor Notification protocol, reported
in seconds and ranging from 2 to 30 seconds.rw INTEGER .1.3.6.1.4.1.18.3.4.4.1.31 |
wfFDDIMacTReqSpecifies the maximum time value of 'wfFddiPathMaxTReq' that
shall be used by any MAC that is configured in this path. The
operational value of 'wfFddiPathMaxTReq' is managed by setting
this attribute. This attribute has the time value range of:
wfFddiPathTvxLowerBound < wfFddiMacTReq <=
wfFddiPathTMaxLowerBound.
Time specified in octet units. The default value of this attribute
is 165 msec. The name of this attribute in the IETF MIB is
FddiMibPATHMaxTReq.
To convert 165 milliseconds to octet units of 80 nanaseconds:
T_Req Nanaoseconds =
((165 * 1000 * 1000) / 80) = 2062500
To convert 2062500 octet units of 80 nanoseconds to milliseconds:
T_Req Milliseconds =
((2062500 / 12.5) / 1000) = 165rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.32 |
wfFDDIMacTMaxThe requested maximum TTRT to be supported by a MAC represented
in unsigned integer specifying time in octet units (80 nanoseconds).ro INTEGER .1.3.6.1.4.1.18.3.4.4.1.33 |
wfFDDIMacTvxValueThe requested value of TvxValue represented in unsigned integer
specifying time in octet units (80 nanoseconds).ro INTEGER .1.3.6.1.4.1.18.3.4.4.1.34 |
wfFDDIMacTMinThe requested minimum TTRT to be requested by a MAC represented
in unsigned integer specifying time in octet units (80 nanoseconds).ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.35 |
wfFDDIHardwareFilterHardware filter (CAM) parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.36 |
wfFDDISmtEnableEnable Station Management periodic timer and NIF protocol.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.37 |
wfFDDITxQueueLengthCurrent Transmit Queue Lengthro INTEGER .1.3.6.1.4.1.18.3.4.4.1.38 |
wfFDDIRxQueueLengthCurrent Receive Queue Lengthro INTEGER .1.3.6.1.4.1.18.3.4.4.1.39 |
wfFDDITxClipFramesNumber of frames clipped in driver's transmit routine due to transmit
congestion.ro Counter .1.3.6.1.4.1.18.3.4.4.1.40 |
wfFDDIRxReplenMissesNumber of packet buffer misses while attempting to replenish driver
receive ring.ro Counter .1.3.6.1.4.1.18.3.4.4.1.41 |
wfFDDICfgTxQueueLengthConfigured Transmit Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero causes router based default values to be used. Values larger
than the compiled ring size are truncated to the compiled ring
size.rw INTEGER .1.3.6.1.4.1.18.3.4.4.1.42 |
wfFDDICfgRxQueueLengthConfigured Receive Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero cuases router based default values to be used. Values larger
than the compiled ring size are truncated to the compiled ring
size.rw INTEGER .1.3.6.1.4.1.18.3.4.4.1.43 |
wfFDDILineNumberLogical line number associated with this driver entity.rw INTEGER .1.3.6.1.4.1.18.3.4.4.1.44 |
wfFDDIForcePeerTreeThis attribute allows all FDDI Peer/Tree connections
to reach the 'Thru' state. This is done to give the
user some flexibility and allow them to Daisy Chain
their Phy connections, mixing Tree & Peer connections.
This type of daisy chaining DOES NOT conform to the
SMT standard and is NOT recommended as it may result in
a less than optimum token path. Normally when we have a
Peer/Tree connection mix, we will wrap the connection,
favoring PHY B.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.45 |
wfFDDIInvalidFrameStatusRxA count of the number of badly formed frames received off
of the FDDI ring. These are frames which do not contain a
valid Frame Status field of at least 3 control indicator
symbols (i.e. E, A, C, flags).ro Counter .1.3.6.1.4.1.18.3.4.4.1.46 |
wfFDDIRxOversizedFramesNumber of LLC frames received whose length exceeded the MTU.ro Counter .1.3.6.1.4.1.18.3.4.4.1.47 |
wfFDDIRxSmtOversizedFramesNumber of SMT frames received whose length exceeded the MTU.ro Counter .1.3.6.1.4.1.18.3.4.4.1.48 |
wfFDDIRxUndersizedFramesNumber of LLC frames received whose length was less than 20 bytes
including the FC byte and a 4 byte CRC.ro Counter .1.3.6.1.4.1.18.3.4.4.1.49 |
wfFDDIRxSmtUndersizedFramesNumber of SMT frames received whose length was less than 37 bytes
including the FC byte and a 4 byte CRC.ro Counter .1.3.6.1.4.1.18.3.4.4.1.50 |
wfFDDIModuleModule number for ASN platform, filled in by driver. For non-ASN
platforms this attribute will not be used.ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.51 |
wfFDDIActualNodeActual Node number for ASN platform, filled in by
driver. For non-ASN platforms, this attribute will not
be used.ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.52 |
wfFDDILastChangeThe value of SysUpTime at the time the interface entered it's current
operational state (UP state). SysUpTime is defined as the time (in
hundredths of a second) since the network management portion of the
system was last re-initialized. Usually the time since boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.4.4.1.53 |
wfFDDIOutQLenThe instantaneous current length of the output packet queue (in packets).ro Gauge .1.3.6.1.4.1.18.3.4.4.1.54 |
wfFDDIRxSmtOctetsNumber of bytes received without error. This byte count
only includes SMT frames (i.e. no MAC and LLC frames).ro Counter .1.3.6.1.4.1.18.3.4.4.1.55 |
wfFDDIRxSmtFramesNumber of frames received without error. This frame count
only includes SMT frames (i.e. no MAC and LLC frames).ro Counter .1.3.6.1.4.1.18.3.4.4.1.56 |
wfFDDIIntProcessingsCounts the number of times the interrupt service
routine has been calledro Counter .1.3.6.1.4.1.18.3.4.4.1.57 |
wfFDDITxProcessingsCounts the number of times the transmit routine
fsi_xmt_oper_act(), has been calledro Counter .1.3.6.1.4.1.18.3.4.4.1.58 |
wfFDDIRxProcessingsCounts the number of times RINT processing takes place
in the interrupt service routine.ro Counter .1.3.6.1.4.1.18.3.4.4.1.59 |
wfFDDITxRNRProcessingsCounts the number of times the transmit complete routine
fsi_xmt_cmpl(), has been calledro Counter .1.3.6.1.4.1.18.3.4.4.1.60 |
wfFDDISmtRxProcessingsCounts the number of time RINT was processing was performed on the
SMT receive ring.ro Counter .1.3.6.1.4.1.18.3.4.4.1.61 |
wfFDDIPhyALogPtrAddress of the Debug Phy Event Buffer for Phy A. This
attribute is strictly for diagnostic purposes. The size
of the buffer is 1028 bytes.ro INTEGER .1.3.6.1.4.1.18.3.4.4.1.62 |
wfFDDIPhyBLogPtrAddress of the Debug Phy Event Buffer for Phy B. This
attribute is strictly for diagnostic purposes. The size
of the buffer is 1028 bytes.ro INTEGER .1.3.6.1.4.1.18.3.4.4.1.63 |
wfFDDIPromiscuousFor now this attribute is used only in BNX code !!!
The promiscuous parameter allows address filtering based on the
destination MAC addresses. When enabled, all frames are received,
disabled indicates only frames destined for this local address
and any functional group address are received.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.64 |
wfFDDILLCFrameControlFrame control used for LLC frames, using synchronous frames
for reserved priority traffic when specified.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.65 |
wfFDDITurboBoflDEBUG parameter - Turbo bofl enabled or disabled, by adjusting
BoflNum and BoflLen bofl packets can be made to fill the links
available bandwith. This function is not a faster parallel of
the wfFDDIBofl feature it does not opperate on a disabled LLC
interfacerw Enumeration .1.3.6.1.4.1.18.3.4.4.1.66 |
wfFDDIBoflNumDEBUG parameter - Number of breath of life packets per breath
of liferw INTEGER .1.3.6.1.4.1.18.3.4.4.1.67 |
wfFDDIBoflLenDEBUG parameter - breath of life packet lengthrw INTEGER .1.3.6.1.4.1.18.3.4.4.1.68 |
wfFddiSmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.4.15.1 |
wfFddiSmtTableA list of SMT entries. SEQUENCE OF WfFddiSmtEntry .1.3.6.1.4.1.18.3.4.15.1.2 |
wfFddiSmtEntryA SMT entry containing information common to a given SMT. WfFddiSmtEntry .1.3.6.1.4.1.18.3.4.15.1.2.1 |
wfFddiSmtSlotSlot number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.1 |
wfFddiSmtNodeNode/connector number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.2 |
wfFddiSmtCctCircuit number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.3 |
wfFddiSmtStationIdUnique identifier of an FDDI station.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.1.2.1.4 |
wfFddiSmtOpVersionIdThe version that this station is using for its operation.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.5 |
wfFddiSmtMacCtThe number of MACs in a station.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.6 |
wfFddiSmtNonMasterCtThe number of non master ports (A, B, or S PORTs) in a station.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.7 |
wfFddiSmtEcmStateIndicates the current state of the ECM state machine.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.8 |
wfFddiSmtCfStateThe attachment configuration for a station.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.9 |
wfFddiSmtBypassPresentA flag indicating if the station has an optical bypass on its
A/B port pair.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.10 |
wfFddiSmtRemoteDisconnectFlagA flag indicating that the station was remotely disconnected
from the network as a result of receiving an 'wfFddiSmtStationAction'
disconnect in a Parameter Management Frame. A station requires
a Connect Action to rejoin & clear the flag.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.11 |
wfFddiSmtStationStatusThis variable indicates the current state of the primary and
secondary paths within this station.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.12 |
wfFddiSmtPeerWrapFlagThis variable assumes the value of the 'PeerWrapFlag' in CFM.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.13 |
wfFddiSmtExtTableA list of SMT extension entries. SEQUENCE OF WfFddiSmtExtEntry .1.3.6.1.4.1.18.3.4.15.1.3 |
wfFddiSmtExtEntryA SMT entry containing information common to a given SMT. WfFddiSmtExtEntry .1.3.6.1.4.1.18.3.4.15.1.3.1 |
wfFddiSmtDeleteCreate/delete parameter, default = create.rw Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.1 |
wfFddiSmtExtSlotSlot number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.3.1.2 |
wfFddiSmtExtNodeNode/connector number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.3.1.3 |
wfFddiSmtExtCctCircuit number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.3.1.4 |
wfFddiSmtHiVersionIdThe highest version of SMT that this station supports.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.5 |
wfFddiSmtLoVersionIdThe lowest version of SMT that this station supports.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.6 |
wfFddiSmtManufacturerDataContains 32 Octets of manufacturer data. The first component,
manufacturing OUI, is the 3 octet Organizationally Unique
Identifier (OUI) assigned by IEEE. The second component,
ManufacturerData, is the manufacturers data (29 octets).ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.1.3.1.7 |
wfFddiSmtUserDataContains 32 Octets of user defined information in ascii format.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.15.1.3.1.8 |
wfFddiSmtMibVersionIdThe version of the FDDI MIB of this station.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.9 |
wfFddiSmtMasterCtsThe number of M ports in a node.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.3.1.10 |
wfFddiSmtAvailablePathsA bit string that indicates the path types that are available
in the station.
The value initially takes the value 0, then for each type of
path that this node has available, 2 raised to a power is added
to the sum. The powers are according to the following table:
Path Power
-
Primary 0
Secondary 1
Local 2
For example, a station having Primary and Local paths available
would have a value of 5 (2**0 + 2**2).ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.11 |
wfFddiSmtConfigCapabilitiesA bit string which indicates the configuration capabilities of
a node.
The 'Hold Available' bit indicates the support of the optional
Hold function, which is controlled by 'wfFddiSmtConfigPolicy'.
The 'CF-Wrap-AB' bit indicates that the station has the capability
of performing a wrab_ab.
The value is a sum. This value initially takes the value 0, then
for each of the configuration policies currently enforced on the
node, 2 raised to a power is added to the sum. The powers are
according to the following table:
Policy Power
HoldAvailable 0
CF_Wrap-AB 1ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.12 |
wfFddiSmtConfigPolicyA bit string representing the configuration policies currently
desired in a node. 'Hold' is one of the terms used for the
'Hold' flag.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.3.1.13 |
wfFddiSmtStatRptPolicyIf ENABLED, indicates that the node will generate Status Report Frames
(SRF) for its implemented events.rw Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.14 |
wfFddiSmtTraceMaxExpirationMaximum propogation time for a Trace on an FDDI topology. The
value is stored in milliseconds.rw INTEGER .1.3.6.1.4.1.18.3.4.15.1.3.1.15 |
wfFddiSmtTimeStampHolds the time of creation of the last Status Report Frame (SRF).ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.1.3.1.16 |
wfFddiSmtTransitionTimeStampHolds the time of occurrence of the last condition or event.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.1.3.1.17 |
wfFddiSmtDatProtocolSMT will implement an optional ANSI duplicate address test
involving periodic transmission of NSA NIF frames addressed
to itself if enabled by this attribute.rw Enumeration .1.3.6.1.4.1.18.3.4.15.1.3.1.18 |
wfFddiSmtActionTableA list of SMT action entries. SEQUENCE OF WfFddiSmtActionEntry .1.3.6.1.4.1.18.3.4.15.1.4 |
wfFddiSmtActionEntryAn SMT entry containing actions common to a given SMT. WfFddiSmtActionEntry .1.3.6.1.4.1.18.3.4.15.1.4.1 |
wfFddiSmtActionDeleteCreate/delete parameter, default = create.rw Enumeration .1.3.6.1.4.1.18.3.4.15.1.4.1.1 |
wfFddiSmtActionSlotSlot number associated with an SMT action entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.4.1.2 |
wfFddiSmtActionNodeNode/connector number associated with an SMT action entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.4.1.3 |
wfFddiSmtActionCctCircuit number associated with an SMT action entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.4.1.4 |
wfFddiSmtStationActionThis object when read, always returns a value of other(1).
The behavior of setting this variable to each of the acceptable
values is as follows:
Other: Results in a BadValue error
Connect: Generates a connect signal to ECM
to begin a connection sequence. The
'wfFddiSmtRemoteDisconnectFlag' is
cleared on the setting of this
variable to 1.
Disconnect: Generates a disconnect signal to
ECM and sets the
'wfFddiSmtRemoteDisconnectFlag'
to TRUE.
Path_Test: Initiates a station path test.
The 'PathTest' variable is set
to 'Testing'. The results of
this action are not specified
in the standard.
Self_test: Initiates a station self test.
The results of this action are
not specified in the standard.
Disable_A: Disable_A causes a PC_Disable on the
A port if the A port mode is peer.
Disable_B: Disable_B causes a PC_Disable on the
B port if the B port mode is peer.
Disable_M: Disable_M causes a PC_Disable on all
M ports.
Attempts to set this object to all other values results in a
BadValue error. Agents may elect to return a BadValue error on
attempts to set this variable to PathTest or SelfTest.rw Enumeration .1.3.6.1.4.1.18.3.4.15.1.4.1.5 |
wfFddiMacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.2 |
wfFddiMacTableA list of MAC entries. SEQUENCE OF WfFddiMacEntry .1.3.6.1.4.1.18.3.4.15.2.2 |
wfFddiMacEntryA MAC entry containing information common to a given MAC. WfFddiMacEntry .1.3.6.1.4.1.18.3.4.15.2.2.1 |
wfFddiMacSlotSlot number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.1 |
wfFddiMacNodeNode/connector number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.2 |
wfFddiMacCctCircuit number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.3 |
wfFddiMacUpstreamNbrThe MAC's upstream neighbor's long individual MAC address. It
may be determined by the Neighbor Information Frame protocol.
The value shall be reported as '00 00 00 00 00 00' if it is
unknown. SMT uses the MSB form for representation of 48-bit
addresses.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.4 |
wfFddiMacDownstreamNbrThe MAC's downstream neighbor's long individual MAC address. It
may be determined by the Neighbor Information Frame protocol.
The value shall be reported as '00 00 00 00 00 00' if it is
unknown. SMT uses the MSB form for representation of 48-bit
addresses.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.5 |
wfFddiMacSmtAddressThe 48 bit individual address of the MAC used for SMT frames.
SMT uses the MSB form for representation of 48-bit addresses.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.6 |
wfFddiMacTNegThe negotiated TTRT during the claim process represented as an
unsigned integer specifying time in nanoseconds.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.7 |
wfFddiMacRmtStateIndicates the current state of the Ring Management state machine.ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.8 |
wfFddiMacOldUpstreamNbrThe previous value of the MAC's upstream neighbor's long
individual MAC address. It has an initial value of the
SMT-Unknown-MAC Address and is only modified as specified by
the Neighbor Information Frame protocol. SMT uses the MSB
form for representation of 48-bit addresses.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.9 |
wfFddiMacOldDownstreamNbrThe previous value of the MAC's downstream neighbor's long
individual MAC address. It has an initial value of the
SMT-Unknown-MAC Address and is only modified as specified by
the Neighbor Information Frame protocol. SMT uses the MSB
form for representation of 48-bit addresses.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.10 |
wfFddiMacTokenCtsA count that should as closely as possible match the number
of times the station has received a token (total of
non-restricted and restricted) on this MAC. This count is
valuable for determination of network load.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.11 |
wfFddiMacErrorCtsA count of the number of frames that were detected in error by
this MAC that had not been detected in error by another MAC.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.12 |
wfFddiMacLostCtsA count of the number of instances that this MAC detected a
format error during frame reception such that the frame was
stripped.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.13 |
wfFddiMacDaFlagDuplicate Address Flag. An RMT flag used to indicate that the
MAC under control has the same address as another MAC on the FDDI.ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.14 |
wfFddiMacUnaDaFlagA flag, UNDA_Flag, set when the upstream neighbor reports a
duplicate address condition. Cleared once the condition clears.ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.15 |
wfFddiMacFrameErrorFlagIndicates the MAC Frame Error Condition is present when set.
Cleared when the condition clears and on station initialization.ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.16 |
wfFddiMacMaUnitDataAvailableA flag indicating that the MAC is available for the transmission
and reception of Protocol Data Units (PDUs). The MAC and LLC
interface will be established when the wfFddiMacMaUnitDataEnable
attribute is enabled.ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.17 |
wfFddiMacDownstreamPortTypeIndicates the PC-Type of the first port that is downstream of
this MAC (the exit port).ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.18 |
wfFddiMacExtTableA list of MAC extension entries. SEQUENCE OF WfFddiMacExtEntry .1.3.6.1.4.1.18.3.4.15.2.3 |
wfFddiMacExtEntryA MAC entry containing information common to a given MAC. WfFddiMacExtEntry .1.3.6.1.4.1.18.3.4.15.2.3.1 |
wfFddiMacDeleteCreate/delete parameter, default = create.rw Enumeration .1.3.6.1.4.1.18.3.4.15.2.3.1.1 |
wfFddiMacExtSlotSlot number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.3.1.2 |
wfFddiMacExtNodeNode/connector number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.3.1.3 |
wfFddiMacExtCctCircuit number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.3.1.4 |
wfFddiMacFrameStatusFunctionsIndicates the MAC's optional Frame Status processing functions.
The value is a sum. This value initially takes the value 0,
then for each function present, 2 raised to a power is added
to the sum. The powers are according to the following table:
function power
-
fs-repeating 0
fs-setting 1
fs-clearing 2ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.3.1.5 |
wfFddiPathGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.3 |
wfFddiPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.4 |
wfFddiXGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.5 |
wfFddiXPortTableA list of PORT Entries. SEQUENCE OF WfFddiXPortEntry .1.3.6.1.4.1.18.3.4.15.5.5 |
wfFddiXPortEntryAn FDDI entry containing information about an FDDI interface. WfFddiXPortEntry .1.3.6.1.4.1.18.3.4.15.5.5.1 |
wfFddiXPortSmtIndexThe value of the SMT index associated with this
PORT.ro INTEGER .1.3.6.1.4.1.18.3.4.15.5.5.1.1 |
wfFddiXPortIndexA unique value for each PORT within a given SMT,
which is the same as the corresponding resource
index in SMT. The value for each PORT must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.ro INTEGER .1.3.6.1.4.1.18.3.4.15.5.5.1.2 |
wfFddiXPortEbErrorsThe count of the number of elasticity buffer errors for a
particular PHY. The elasticity buffer is used to account for
clock tolerances between stations.ro INTEGER .1.3.6.1.4.1.18.3.4.15.5.5.1.3 |
wfFddiMacBridgeFunctionsIndicates the MAC's optional bridging functions.
The value is a sum. This value initially takes the value zero,
then for each function present, 2 raised to a power is added to
the sum. The powers are according to the following table:
Function Power
tb 0
sr 1
srt 2
::= { wfFddiMacExtEntry 6 }
wfFddiMacTMaxCapability OBJECT-TYPE
SYNTAX INTEGER {
default(1336934400)
}
ACCESS read-only
STATUS mandatory
DESCRIPTIONro Enumeration .wfFddiXMacEntry.3 |
wfFddiXMacDuplicateTokenCtsThe count of the number of times a Duplicate Token has
been detected.ro Counter .wfFddiXMacEntry.4 |