Wellfleet-EGP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
48
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
wfEgp OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2.4.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.3.2.4.1 |
wfEgpDeleteCreate/Delete parameter for determining whether
or not EGP is configured on this slot.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.1.1 |
wfEgpDisableEnable/Disable parameter for determining whether
or not to startup EGP.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.1.2 |
wfEgpInMsgsThe aggregate number of EGP messages received in the box
without error. This is part of the EGP group in Mib2.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.1.3 |
wfEgpInErrorsThe total number of all EGP messages received in the box
that had errors. This is part of the EGP group in Mib2.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.1.4 |
wfEgpOutMsgsThe total number of EGP locally generated messages from
the box. This is part of the EGP group in Mib2.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.1.5 |
wfEgpOutErrorsThe total number of locally generated EGP messages from
the box that had errors. This is part of the EGP group in
Mib2.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.1.6 |
wfEgpLocalAsThe NIC-assigned decimal number that identifies the local
autonomous system.rw INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.1.7 |
wfEgpNeighTableThe EGP Neighbor table contains information regarding this EGP
router's EGP neighbors on a particular interface. This table
follows the egpNeighTable exactly as specified in he EGP group
in Mib 2. SEQUENCE OF WfEgpNeighEntry .1.3.6.1.4.1.18.3.5.3.2.4.2 |
wfEgpNeighEntryAn entry in the EGP Neighbor table WfEgpNeighEntry .1.3.6.1.4.1.18.3.5.3.2.4.2.1 |
wfEgpNeighStateThe EGP state of the local system with respect to this
entry's EGP neighbor. Each EGP state is represented by a
value that is one greater than the numerical value associated
with said state in RFC 904.ro Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.2.1.1 |
wfEgpNeighAddrThe IP address of this entry's EGP neighbor.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.4.2.1.2 |
wfEgpNeighAsThe NIC-assigned decimal number that identifies the remote
autonomous system (AS) of this EGP peer. Zero should be
specified if the AS number of the neighbor is not yet known.ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.2.1.3 |
wfEgpNeighInMsgsThe number of EGP messages received without error from
this EGP peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.4 |
wfEgpNeighInErrsThe number of EGP messages received from this EGP peer
that proved to be in error (e.g., bad EGP checksum).ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.5 |
wfEgpNeighOutMsgsThe number of locally generated EGP messages to this
EGP peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.6 |
wfEgpNeighOutErrsThe number of locally generated EGP messages not sent
to this EGP peer due to resource limitations within
an EGP entity.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.7 |
wfEgpNeighInErrMsgsThe number of EGP-defined error messages received
from this EGP peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.8 |
wfEgpNeighOutErrMsgsThe number of EGP-defined error messages sent to
this EGP peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.9 |
wfEgpNeighStateUpsThe number of EGP state transitions to the UP state
with this EGP peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.10 |
wfEgpNeighStateDownsThe number of EGP state transitions from the UP state
to any other state with this EGP peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.11 |
wfEgpNeighIntervalHelloThe interval between EGP Hello command retransmissions (in
seconds). This represents the t1 timer as defined in RFC 904.ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.2.1.12 |
wfEgpNeighIntervalPollThe interval between EGP poll command retransmissions (in
seconds). This represents the t3 timer as defined in RFC 904.ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.2.1.13 |
wfEgpNeighModeThe polling mode of this EGP entity, either passive
or active.ro Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.2.1.14 |
wfEgpNeighEventThe EGP event that occurred on the local interface with respect
to this entry's EGP neighbor.ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.2.1.15 |
wfEgpNeighBadAsnsThe number of received EGP messages that contained an
unrecognized AS number in the EGP header.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.16 |
wfEgpNeighBadCodesThe number of received EGP messages that contained an
unrecognized value in the Code field in the EGP header.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.17 |
wfEgpNeighBadHellosThe number of unexpected Hello neighbor reachability
messages received by EGP. A Hello message is unexpected
when received from a passive peer.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.18 |
wfEgpNeighBadIHUsThe number of unexpected I Hear You neighbor reachability
messages received by EGP. A I Hear You message is unexpected
when received in the absence of a prior Hello message.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.19 |
wfEgpNeighBadStatusesThe number of received EGP messages that contained an
unrecognized value in the Status field in the EGP header.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.20 |
wfEgpNeighBadChecksumsThe number of received EGP messages that contained a
faulty checksum in the EGP header.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.21 |
wfEgpNeighBadTypesThe number of received EGP messages that contained an
unrecognized value in the Type field in the EGP header.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.22 |
wfEgpNeighBadVersionsThe number of received EGP messages that contained an
invalid EGP Version number in the EGP header. This EGP
implementation supports EGP Version 2.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.23 |
wfEgpNeighCmdOutOfSeqsThe number of times EGP received an out-of-sequence command
message. An out-of-sequence message indicates that a prior
message, issued by an EGP peer, has been missed.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.24 |
wfEgpNeighCmdRejectsThe number of times EGP refused to respond to a received
command. Such refusal could be generated by receipt of a
neighbor acquisition message from an unknown AS, or by
receipt of a faulty EGP message (for example, one with a
bad checksum) from a known neighbor.ro Counter .1.3.6.1.4.1.18.3.5.3.2.4.2.1.25 |
wfEgpCfgNeighTableThis table is used to configure the parameters for a relationship
with a particular local EGP neighbor. This table is proprietary
and not part of the standard EGP MIB. SEQUENCE OF WfEgpCfgNeighEntry .1.3.6.1.4.1.18.3.5.3.2.4.3 |
wfEgpCfgNeighEntryAn entry in the EGP Cfg Neighbor table WfEgpCfgNeighEntry .1.3.6.1.4.1.18.3.5.3.2.4.3.1 |
wfEgpCfgNeighDeleteCreate/Delete parameter. Users perform an SNMP SET
operation on this object to create/delete an EGP
neighbor relationship with the specified local IP
address.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.3.1.1 |
wfEgpCfgNeighDisableEnable/Disable parameter. Users perforn an SNMP SET
operation on this object to enable/disable an EGP
Neighbor relationship with the specified local IP address.
Default is enabled.
This variable is also used to trigger operator-initiated
Start and Stop events in the EGP FSM. It takes the place
of the egpNeighEventTrigger variable. When set, this variable
causes a Start or Stop event on the specified neighbor, as
specified on pages 8-10 of RFC 904. Briefly, a Start event
causes an Idle peer to begin neighbor acquisition and a
non-Idle peer to reinitiate neighbor acquisition. A stop
event causes a non-Idle peer to return to the Idle state
until a Start event occurs, either via egpNeighEventTrigger
or otherwise. This parameter is part of MIB 2.
NOTE: The FSM is only affected if EGP is Enabled on the
slot.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.3.1.2 |
wfEgpCfgNeighStateThis parameter relfects the current state of the specified
EGP neighbor relationship with specfied local IP address.ro Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.3.1.3 |
wfEgpCfgNeighLocalAddrThe IP address of the local interface that provides the
EGP connection to the remote autonomous system.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.4.3.1.4 |
wfEgpCfgNeighRemoteAddrThe IP address of the remote interface that provides the
EGP connection to the remote autonomous system.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.4.3.1.5 |
wfEgpCfgNeighGatewayModeThis parameter specifies the EGP gateway mode of this IP
interface. The two modes are core and non-core. When the
interface is configured in non-core mode, it will advertise
and forward only traffic that originated or is destined
for a local network within its AS. When configured for
this mode, certain EGP Export Route Filters are auto-
matically configured for this interface. When the interface
is configured in Core mode, it can advertise and forward
traffic to networks interior or exterior to its local AS.
The default is Core mode.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.3.1.6 |
wfEgpCfgNeighAcqModeThis parameter specifies which of the two neighbors will
initiate EGP connections. This configures the mode for the
local EGP neighbor. Note: At least one neighbor must be
in the Active mode.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.3.1.7 |
wfEgpCfgNeighPollModeThis parameter specifies the type of neighbor reachability
algorithm this local EGP neighbor will execute.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.4.3.1.8 |
wfEgpCfgNeighHelloTimerThis parameter specifies the interval between EGP Hello
command retransmissions (in seconds) by the local EGP neighbor.
This represents the t1 timer as defined in RFC 904.rw INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.3.1.9 |
wfEgpCfgNeighPollTimerThis parameter specifies the interval between EGP poll
command retransmissions (in hundredths of a second) by the
local EGP neighbor. This represents the t3 timer as defined
in RFC 904.rw INTEGER .1.3.6.1.4.1.18.3.5.3.2.4.3.1.10 |