Wellfleet-DSQMS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
66
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
66 total| Object Name |
|---|
RFC1155-SMITable of DSQMS (DiffServ Queue Management and
Scheduler) interfaces. SEQUENCE OF WfDsqmsIfEntry .1.3.6.1.4.1.18.3.5.1.16.1 |
wfDsqmsIfQueueTableTable of DSQMS (DiffServ Queue Management and
Scheduler) queues. SEQUENCE OF WfDsqmsIfQueueEntry .1.3.6.1.4.1.18.3.5.1.16.2 |
wfDsqmsIfQueueEntryDSQMS queue table entry. WfDsqmsIfQueueEntry .1.3.6.1.4.1.18.3.5.1.16.2.1 |
wfDsqmsIfQueueCreateCreate/Delete parameter. Default is created.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.1 |
wfDsqmsIfQueueEnableEnable/Disable parameter. Default is disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.2 |
wfDsqmsIfQueueStateIndicate whether the particular queue is operational.ro Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.3 |
wfDsqmsIfQueueLineNumberIdentifies the interface this queue belongs to.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.4 |
wfDsqmsIfQueueIdIdentifies the instance of this queue.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.5 |
wfDsqmsIfQueueTypeSelects the queue scheduling type, strict priority or
weighted round robin. In strict priority, the queues are
serviced in the order of highest priority to lowest
priority. In weighted round robin, each queue is serviced
according to the weights.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.6 |
wfDsqmsIfQueueBestEffortThe indication of whether or not this queue is used for
best effort traffic. It is default to not a best effort
queue.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.7 |
wfDsqmsIfQueuePrioLevelPriority level for this queue, 0=highest priority.
A possible lowest priority can be 29. This parameter
is applicable to priority queue only.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.8 |
wfDsqmsIfQueuePrioTimeQuantumIndicates the maximum amount of time (in msec) the queue is allowed
to transmit data. This intends to avoid starvation of
other queues. This parameter is applicable to priority
queue only.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.9 |
wfDsqmsIfQueueCfgPktLimitConfigured maximum number of packets this queue can hold.
If this value is not configured, default to zero, the system
will determine the limit based on the number of buffers
available and the number of queues configured on the slot.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.10 |
wfDsqmsIfQueuePktLimitMaximum number of packets this queue can hold.
This value is filled in by the system if wfDsqmsIfQueueCfgPktLimit
is set to default(0), otherwise it is wfDsqmsIfQueueCfgPktLimit.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.11 |
wfDsqmsIfQueueByteLimitMaximum number of bytes this queue can hold.
Default to zero. If zero, no byte limit.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.12 |
wfDsqmsIfQueueCfgWeightIndicates the relative ratio of this queue over the sum
of all the weighted queues on the same interface. For
instance, this queue's CfgWeight is 5 and two other
queues' CfgWeight are 3 and 2. This queue will get
the weight of 5 over 10 (5+3+2) or 50%. The other queues's
weights are 30% and 20%, respectively.
This parameter is applicable to weighted queue only.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.13 |
wfDsqmsIfQueueWeightActual weight, in percentage, is currently used.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.14 |
wfDsqmsIfQueueQuantumAmount of data (in bytes) this queue is allowed to
transmit per scheduler's invocation. This value is
calculated.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.15 |
wfDsqmsIfQueueFlowFairnessEnableIndicates whether or not hash table should be used.
When this parameter is enabled, hash table is used
to separate data packets into buckets within this queue.
This mechanism will improve the fairness among flows
within a queue.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.16 |
wfDsqmsIfQueueJitterConstCategorizes how sensitive traffic of this queue is to
jitter effect, thus this parameter provides an indicator
for calculating the bucket quantum.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.17 |
wfDsqmsIfQueueBucketQuantumAmount of data (in bytes) a bucket within this queue is
allowed to transmit per scheduler's invocation. This value
is calculated based on queue quantum and the jitter constant
parameters. This parameter is applicable to the flow fairness
enable parameter.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.18 |
wfDsqmsIfQueueDropTypeIndicates whether or not RED (Random Earlt Detection) is used
for active queue management. If disabled, tail drop
is used for this queue. This parameter is default
to disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.2.1.19 |
wfDsqmsIfQueuePktCountCurrent number of packets in this queue.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.20 |
wfDsqmsIfQueueByteCountCurrent number of bytes in this queue.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.21 |
wfDsqmsIfQueueXmitPktsTotal number of packets transmitted out of this queue
since creation or last reset. This is a statistics parameter.ro Counter .1.3.6.1.4.1.18.3.5.1.16.2.1.22 |
wfDsqmsIfQueueXmitBytesToal number of bytes transmitted out of this queue
since creation or last reset. This is a statistics parameter.ro Counter .1.3.6.1.4.1.18.3.5.1.16.2.1.23 |
wfDsqmsIfQueueDroppedPktsTotal number of packets dropped from this queue
since creation or last reset. This is a statistics parameter.ro Counter .1.3.6.1.4.1.18.3.5.1.16.2.1.24 |
wfDsqmsIfQueueDroppedBytesTotal number of bytes dropped from this queue
since creation or last reset. This is a statistics parameter.ro Counter .1.3.6.1.4.1.18.3.5.1.16.2.1.25 |
wfDsqmsIfQueueRedEwqaGainGain value used in exp-weighted que average calculations. Value
is expressed as percent 1%-100%rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.26 |
wfDsqmsIfQueueRedIdleLossRateRate - derivative from gain value for the case of empty queue.
Rate with which average value is diminishes. For instance 30%,
means 'Average size diminishes by 30% per second.' Value
is expressed as percent 1%-99%rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.2.1.27 |
wfDsqmsIfClassifierTableTable of DSQMS (DiffServ Queue Management and
Scheduler) classifier. SEQUENCE OF WfDsqmsIfClassifierEntry .1.3.6.1.4.1.18.3.5.1.16.3 |
wfDsqmsIfClassifierEntryDSQMS classifier table entry. Classifier entry is used
to select the queue and red function for IP packets, based on
DS byte in the IP header. WfDsqmsIfClassifierEntry .1.3.6.1.4.1.18.3.5.1.16.3.1 |
wfDsqmsIfClassifierCreateCreate/Delete parameter. Default is created.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.3.1.1 |
wfDsqmsIfClassifierLineNumberIdentifies the interface this classifier belongs to.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.3.1.2 |
wfDsqmsIfClassifierDSCPDS Code Point (DSCP) for this classifier. This is also
an identifier for this instance.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.3.1.3 |
wfDsqmsIfClassifierQueueIdIndicates the queue to be used for IP packets whose DSCPs
match with this classifier's DSCP.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.3.1.4 |
wfDsqmsIfClassifierRedIdIndicates the RED function to be used for IP packets
whose DSCPs match with this classifier's DSCP. RedId
of zero means RED is not applicable for this DSCP
in the queue indicated by QueueId parameter.rw INTEGER .1.3.6.1.4.1.18.3.5.1.16.3.1.5 |
wfDsqmsRedTableTable of DSQMS (DiffServ Queue Management and
Scheduler) RED (Random Early Detection). SEQUENCE OF WfDsqmsRedEntry .1.3.6.1.4.1.18.3.5.1.16.4 |
wfDsqmsRedEntryDSQMS Red table entry. Red entry is used to configure
te RED parameters to make up RED drop probability. WfDsqmsRedEntry .1.3.6.1.4.1.18.3.5.1.16.4.1 |
wfDsqmsRedCreateCreate/Delete parameter. Default is created.rw Enumeration .1.3.6.1.4.1.18.3.5.1.16.4.1.1 |
wfDsqmsRedIdUnique identifier.ro INTEGER .1.3.6.1.4.1.18.3.5.1.16.4.1.2 |
wfDsqmsRedCfgStatusro Enumeration .1.3.6.1.4.1.18.3.5.1.16.4.1.3 |
wfDsqmsRed2ndOrderConstHighest order constantrw INTEGER (0 .. 1000) .1.3.6.1.4.1.18.3.5.1.16.4.1.4 |
wfDsqmsRed1stOrderConstLowest order constantrw INTEGER (0 .. 100) .1.3.6.1.4.1.18.3.5.1.16.4.1.5 |
wfDsqmsRedMinThLower portion of the average queue value (percent)
where prob. of being dropped is always 0 (zero)rw INTEGER (0 .. 100) .1.3.6.1.4.1.18.3.5.1.16.4.1.6 |
wfDsqmsRedMaxThUpper portion of the average queue value (percent)
where prob. of being dropped is always 0 (zero)rw INTEGER (1 .. 100) .1.3.6.1.4.1.18.3.5.1.16.4.1.7 |
wfDsqmsIfEntryDSQMS interface table entry. WfDsqmsIfEntry .wfDsqmsIfTable.1 |
wfDsqmsIfCreateCreate/Delete parameter. Default is created.rw Enumeration .wfDsqmsIfTable.1.1 |
wfDsqmsIfEnableEnable/Disable parameter. Default is enabled.rw Enumeration .wfDsqmsIfTable.1.2 |
wfDsqmsIfStateCurrent state of DSQMS on this interface.ro Enumeration .wfDsqmsIfTable.1.3 |
wfDsqmsIfLineNumberIdentifies the instance for this interface.ro INTEGER .wfDsqmsIfTable.1.4 |
wfDsqmsIfRestartSetting this attribute to a 'set(1)' will
cause immediate updating of wfDsqmsIfQueueEntry MIB
on the same line number. Once activated, this attribute
should be reset to 'notset(2)' to allow subsequent activations.rw Enumeration .wfDsqmsIfTable.1.5 |
wfDsqmsIfTotalNumQueuesThe total number of queues configured for this interface.ro INTEGER .wfDsqmsIfTable.1.6 |
wfDsqmsIfNumPQueuesNumber of priority queues configued for this interface.ro INTEGER .wfDsqmsIfTable.1.7 |
wfDsqmsIfNumWQueuesNumber of weighted queues configued for this interface.ro INTEGER .wfDsqmsIfTable.1.8 |
wfDsqmsIfNumPQInUseNumber of priority queues that are currently in use
for this interface.ro INTEGER .wfDsqmsIfTable.1.9 |
wfDsqmsIfNumWQInUseNumber of weighted queues that are currently in use
for this interface.ro INTEGER .wfDsqmsIfTable.1.10 |
wfDsqmsIfDebugLevelIndicates the level of debug.
none - default. No debug information is displayed
trace - displaying related DSQMS function names
detailed - in additional to log messages of 'high' level,
some environment variables, queue info will
be logged.
Note: DO NOT set to 'trace' or 'detailed' debug level
in operational environment as it will likely flood the
logging facility. This attribute is reserved for specialized
debugging in a controlled lab environment.rw Enumeration .wfDsqmsIfTable.1.11 |
wfDsqmsIfBestEffortQueueIdThe Queue Id that is selected for best effort traffic
for this interface.ro INTEGER .wfDsqmsIfTable.1.12 |
wfDsqmsIfPacketCountNumber of currently queued packets in DSQMS module on this
interface.ro INTEGER .wfDsqmsIfTable.1.13 |
wfDsqmsIfByteCountNumber of currently queued bytes in DSQMS module on this
interface.ro INTEGER .wfDsqmsIfTable.1.14 |
wfDsqmsIfXmitPktsNumber of xmitted packets from DSQMS module on this
interface.ro Counter .wfDsqmsIfTable.1.15 |
wfDsqmsIfXmitBytesNumber of xmitted bytes from DSQMS module on this
interface.ro Counter .wfDsqmsIfTable.1.16 |
wfDsqmsIfDroppedPktsNumber of dropped packets from DSQMS module on this
interface.ro Counter .wfDsqmsIfTable.1.17 |
wfDsqmsIfDroppedBytesNumber of dropped bytes from DSQMS module on this
interface.ro Counter .wfDsqmsIfTable.1.18 |
wfDsqmsIfDequeueAtLineRateDetermines whether the dequeuing from the
queues is to be done at the line rate
instead of the conventional technique or
not.rw Enumeration .wfDsqmsIfTable.1.19 |