Wellfleet-DS3E3-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
34
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
RFC1155-SMIThe DS3/E3 Configuration table SEQUENCE OF WfDs3E3ConfigEntry .1.3.6.1.4.1.18.3.4.26.10 |
wfDs3E3ActionTableDS3E3 configuration Action record -
write only Configuration parameters SEQUENCE OF WfDs3E3ActionEntry .1.3.6.1.4.1.18.3.4.26.17 |
wfDs3E3ActionEntryAn entry in the DS3E3 Config table WfDs3E3ActionEntry .1.3.6.1.4.1.18.3.4.26.17.1 |
wfDs3E3ActionPortLineNumberInstance ID LineNumber, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.26.17.1.1 |
wfDs3E3ActionSendFeacLoopCodeSelects a Far End Alarm and Control Channel code to be
sent to the remote end.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.2 |
wfDs3E3ActionSendFeacDs1LoopUpCodeSelects Loop Up code to be sent to the remote end for a DS1.
Value passed through this attribute is the DS1 Port number
(1 through 28).rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.3 |
wfDs3E3ActionSendFeacDs1LoopDownCodeSelects Loop Down code to be sent to the remote end for a DS1.
Value passed through this attribute is the DS1 Port number
(1 through 28).rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.4 |
wfDs3E3ActionClearCurrentStatsClears this port's Current 15 minute Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.5 |
wfDs3E3ActionClearFarEndCurrentStatsClears this port's Far End, Current 15 minute Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.6 |
wfDs3E3ActionClearDayCurrentStatsClears this port's Current Day Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.7 |
wfDs3E3ActionClearFarEndDayCurrentStatsClears this port's Far End, Current Day Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.8 |
wfDs3E3ActionClearIntervalStatsClears All Interval Statistics (15 minute and day) of this port.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.9 |
wfDs3E3ActionClearFarEndIntervalStatsClears All Far End Interval Statistics (15 minute and day) of this port.rw Enumeration .1.3.6.1.4.1.18.3.4.26.17.1.10 |
wfDs3E3ConfigEntryper circuit DS3/E3 configuration objects;
wfDs3E3ConfigLineIndex corresponds to Wellfleet circuit number WfDs3E3ConfigEntry .wfDs3E3ConfigTable.1 |
wfDs3E3ConfigDeleteCreate/Delete parameterrw Enumeration .wfDs3E3ConfigTable.1.1 |
wfDs3E3ConfigDisableEnable/Disable parameterrw Enumeration .wfDs3E3ConfigTable.1.2 |
wfDs3E3ConfigStateState of the DS3 Port.ro Enumeration .wfDs3E3ConfigTable.1.3 |
wfDs3E3ConfigLastChangeThe value of sysUpTime at the time the interface entered
its current operational state.ro TimeTicks (SNMPv2-SMI) .wfDs3E3ConfigTable.1.4 |
wfDs3E3ConfigLineIndexthis corresponds to the Wellfleet circuit numberro INTEGER .wfDs3E3ConfigTable.1.5 |
wfDs3E3ConfigIfIndexthis is value of ifIndex from the Interfaces table of
MIB II (RFC 1213).ro INTEGER .wfDs3E3ConfigTable.1.6 |
wfDs3E3ConfigLineTypethe variety of DS3/E3 application implementing this circuitrw Enumeration .wfDs3E3ConfigTable.1.7 |
wfDs3E3ConfigLineCodingthe variety of Zero Code Suppression used on the linkrw Enumeration .wfDs3E3ConfigTable.1.8 |
wfDs3E3ConfigLoopbackConfigthe loopback configuration of the DS3/E3 interfacerw Enumeration .wfDs3E3ConfigTable.1.9 |
wfDs3E3ConfigLineStatusthe status of the DS3/E3 linero Enumeration .wfDs3E3ConfigTable.1.10 |
wfDs3E3ConfigPrimaryClockSourceSelects the Primary source of the Tx Clock for the DS3/E3
interfacerw Enumeration .wfDs3E3ConfigTable.1.11 |
wfDs3E3ConfigSecondaryClockSourceSelects the Secondary source of the Tx Clock for the DS3/E3
interfacerw Enumeration .wfDs3E3ConfigTable.1.12 |
wfDs3E3ConfigMtuMTU parameter for all channels on DS3 .rw INTEGER .wfDs3E3ConfigTable.1.13 |
wfDs3E3ConfigLineBuildOutSet according to cable length, short (less than 225 feet)
or long (greater than 225 feet).rw Enumeration .wfDs3E3ConfigTable.1.14 |
wfDs3E3ConfigCurrentClockIndicates the clock source currently in use by the DS1ro Enumeration .wfDs3E3ConfigTable.1.15 |
wfDs3E3ConfigExtClockOperationalIndicates whether the External clock is operationalro Enumeration .wfDs3E3ConfigTable.1.16 |
wfDs3E3ConfigSetupAlarmThresholdSpecifies setup time for performance failure conditions,
in seconds. When a performance defect is present for greater
than the time specified by this parameter a performance
failure is registered and a message is logged.rw INTEGER .wfDs3E3ConfigTable.1.17 |
wfDs3E3ConfigClearAlarmThresholdSpecifies clear time for performance failure conditions,
in seconds. When a performance failure condition has been
cleared for greater than the time specified by this parameter
then the failure cleared condition is registered and a
message is logged.rw INTEGER .wfDs3E3ConfigTable.1.18 |
wfDs3E3ConfigLoopbackStateIndicates the current loopback state of this interface.
The interface can be in one the following states:
Line Loopback
Payload Loopback
no loopback
Loopback modes can be initiated by either of two methods:
Manager requested Loopback is initiated by the Manager of
this device.
Network requested Loopback is initiated by this interface
receiving an in-band request on the network from the far
end device.ro Enumeration .wfDs3E3ConfigTable.1.19 |
wfDs3E3ConfigSendCodeThis variable is currently read-only and it indicates what type of code has
been sent across the DS3 interface by the device. The values mean:
SENDNOCODE - sending looped or normal data
SENDLINECODE - sending a request for a line loopback
SENDPAYLOADCODE - sending a request for a payload loopback
SENDDS1LOOPCODE - sending a request for a DS1 loopbackro Enumeration .wfDs3E3ConfigTable.1.20 |