Home/Catalog/Wellfleet-DCMMW-MIB

Wellfleet-DCMMW-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

Detailed view of the defined objects, syntax rules, and hierarchical paths.

Objects

Active

Status

Dependencies

Imported Objects

RFC-1212

RFC1213-MIB

Wellfleet-COMMON-MIB

Objects

47 total

Object Name	Syntax	OID
wfDCMmw OBJECT IDENTIFIER `.1.3.6.1.4.1.18.3.3.2.16.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.18.3.3.2.16.1`
IMPORTS Unknown `.1.3.6.1.4.1.18.3.3.2.16.1`	Unknown	`.1.3.6.1.4.1.18.3.3.2.16.1`
wfDCMmwDeleteDCMMW is dynamically loaded. This object specifies that the users can perform a set operation on this object in order to create/delete DCMMW base record. Default is created.rwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.1`
wfDCMmwDisableEnables or Disables DCMMW Subsystem. By disabling DCMMW, can disable the DCM board.rwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.2`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.2`
wfDCMmwImageNameA textual string to describe the name of DCM image to be download on to DCM. The image name should be a fully qualified filename. For ex: vol:filename.rwobsolete DisplayString `.1.3.6.1.4.1.18.3.3.2.16.1.3`	DisplayString	`.1.3.6.1.4.1.18.3.3.2.16.1.3`
wfDCMmwBootOptionSpecifies DCM's image load mode to DCMMW. If the option specified is local, DCMMW will not load a new image to DCM's shared memory. If the option specified is download, then DCMMW will load an image into DCM's shared memory. Name of the image is specified using wfDCMMWImageNamerwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.4`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.4`
wfDCMmwImageSaveModeSpecifies DCM's image save mode. If the mode is save, then DCMMW indicates it to DCM, to save the image on to its(DCM's) FLASH memory. This saved image will be used by DCM in its next boot time if the boot option is set to local. If the mode is nosave then the image will not be saved.rwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.5`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.5`
wfDCMmwCfgModeSpecifies whether DCMMW should let DCM use the config info from the shared memory or use the config info from DCM's FLASH memory. If the mode is local, then DCMMW will write `0' in DCM's config file, which indicates the DCM that it should use the config info from its FLASH memory. If the mode is shared memory, then DCMMW will write the config info in DCM's config file, for DCM to use.rwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.6`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.6`
wfDCMmwWriteConfigInfoDCMMW uses this object to specify DCM whether it should commit the configuration information into its Flash memory or notrwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.7`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.7`
wfDCMmwRMONMaxHostIndicates the maximum number of hosts each RMON host control entry on DCM will store. When the table reaches this value, entries will be deleted based on an LRU algorithm. The max limit depends on the amount of memory installed in DCM. It is in the range 2048..8128. DCMMW uses this object to provide the value to DCM. Check the MIB object wfDCMmwRMONHost to verify the number of hosts that got configured in the RMON host control entry.rwobsolete INTEGER `.1.3.6.1.4.1.18.3.3.2.16.1.8`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.1.8`
wfDCMmwRMONDfltHostDCMMW uses this to specify DCM that it should create or not create the hostControlTable. If enabled DCMMW indicates DCM to create default host entries for the interface it is configured to.rwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.9`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.9`
wfDCMmwRMONDfltMtrixDCMMW uses this to specify DCM that it should create or not create the matrixControlTable. If enabled DCMMW indicates DCM to create default matrix entries for the interface it is configured to.rwobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.10`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.10`
wfDCMmwRMONHostThis specifies the configured number of hosts in each RMON host control entry on DCMroobsolete INTEGER `.1.3.6.1.4.1.18.3.3.2.16.1.11`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.1.11`
wfDCMRmonAgentThe state of the RMON agent. A ready state(1) indicates that the RMON agent instrumentation is up and ready to process SNMP requestsroobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.1.12`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.1.12`
wfDCMMemSizeThis specifies DCM board's memory size.roobsolete INTEGER `.1.3.6.1.4.1.18.3.3.2.16.1.13`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.1.13`
wfDCMHwRevThis specifies DCM board's HW revision numberroobsolete DisplayString `.1.3.6.1.4.1.18.3.3.2.16.1.14`	DisplayString	`.1.3.6.1.4.1.18.3.3.2.16.1.14`
wfDCMFwRevThis specifies DCM board's FW revision numberroobsolete DisplayString `.1.3.6.1.4.1.18.3.3.2.16.1.15`	DisplayString	`.1.3.6.1.4.1.18.3.3.2.16.1.15`
wfDCMAgentImageVersionThis specifies DCM board's Agent Image version numberroobsolete DisplayString `.1.3.6.1.4.1.18.3.3.2.16.1.16`	DisplayString	`.1.3.6.1.4.1.18.3.3.2.16.1.16`
wfDCMmwNumDCMThis specifies how many DCMs are presentroobsolete INTEGER `.1.3.6.1.4.1.18.3.3.2.16.1.17`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.1.17`
wfDCMTableTable containing DCM records SEQUENCE OF WfDCMEntry `.1.3.6.1.4.1.18.3.3.2.16.2`	SEQUENCE OF WfDCMEntry	`.1.3.6.1.4.1.18.3.3.2.16.2`
wfDCMEntryInformation concerning a specific DCM entry. Each DCM entry corresponds to a physical probe. WfDCMEntry `.1.3.6.1.4.1.18.3.3.2.16.2.1`	WfDCMEntry	`.1.3.6.1.4.1.18.3.3.2.16.2.1`
wfDCMDeleteCreate/Delete flag. Default is created. User can perform a set operation on this object to create/delete a DCMEntry instance.rw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.1`
wfDCMIndexAn index that uniquely identifies an entry in the DCM table. Each such entry defines one DCM.ro INTEGER `.1.3.6.1.4.1.18.3.3.2.16.2.1.2`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.2.1.2`
wfDCMDisableEnables or Disables the DCMrw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.3`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.3`
wfDCMOperStatusThis object indicates the operational state of the DCMro Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.4`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.4`
wfDCMStreamCountThis object indicates the number of Streams this DCM configured to support.ro INTEGER `.1.3.6.1.4.1.18.3.3.2.16.2.1.5`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.2.1.5`
wfDCMIntfTypeThis object identifies the type of interface this DCM is configured to.ro Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.6`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.6`
wfDCMImageNameA textual string to describe the name of the DCM image to be download on to the DCM. The image name should be a fully qualified filename. For ex: vol:filename.rw DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.18.3.3.2.16.2.1.7`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.18.3.3.2.16.2.1.7`
wfDCMBootOptionSpecifies DCM's image load mode to DCMMW. If the option specified is local, DCMMW will not load a new image to DCM's shared memory. If the option specified is download, then DCMMW will load an image into DCM's shared memory. Name of the image is specified using wfDCMMWImageNamerw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.8`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.8`
wfDCMImageSaveModeSpecifies DCM's image save mode. If the mode is save, then DCMMW indicates it to DCM, to save the image on to its(DCM's) FLASH memory. This saved image will be used by DCM in its next boot time if the boot option is set to local. If the mode is nosave then the image will not be saved.rw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.9`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.9`
wfDCMCfgModeSpecifies whether DCMMW should let DCM use the config info from the shared memory or use the config info from DCM's FLASH memory. If the mode is local, then DCMMW will write `0' in DCM's config file, which indicates the DCM that it should use the config info from its FLASH memory. If the mode is shared memory, then DCMMW will write the config info in DCM's config file, for DCM to use.rw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.10`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.10`
wfDCMSaveConfigInfoDCMMW uses this object to specify DCM whether it should commit the configuration information into its Flash memory or notrw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.11`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.11`
wfDCMRMONMaxHostIndicates the maximum number of hosts each RMON host control entry on DCM will store. When the table reaches this value, entries will be deleted based on an LRU algorithm. The max limit depends on the amount of memory installed in DCM. It is in the range 2048..8128. DCMMW uses this object to provide the value to DCM. Check the MIB object wfDCMmwRMONHost to verify the number of hosts that got configured in the RMON host control entry.rw INTEGER `.1.3.6.1.4.1.18.3.3.2.16.2.1.12`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.2.1.12`
wfDCMRMONDfltHostDCMMW uses this to specify DCM that it should create or not create the hostControlTable. If enabled DCMMW indicates DCM to create default host entries for the interface it is configured to.rw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.13`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.13`
wfDCMRMONDfltMtrixDCMMW uses this to specify DCM that it should create or not create the matrixControlTable. If enabled DCMMW indicates DCM to create default matrix entries for the interface it is configured to.rw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.14`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.14`
wfDCMRMONHostThis specifies the configured number of hosts in each RMON host control entry on DCMro INTEGER `.1.3.6.1.4.1.18.3.3.2.16.2.1.15`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.2.1.15`
wfDCMmemSizeThis specifies DCM board's memory sizero INTEGER `.1.3.6.1.4.1.18.3.3.2.16.2.1.16`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.2.1.16`
wfDCMhwRevThis specifies DCM board's HW revision numberro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.18.3.3.2.16.2.1.17`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.18.3.3.2.16.2.1.17`
wfDCMfwRevThis specifies DCM board's FW revision numberro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.18.3.3.2.16.2.1.18`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.18.3.3.2.16.2.1.18`
wfDCMagentImageVersionThis specifies DCM board's Agent Image version numberro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.18.3.3.2.16.2.1.19`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.18.3.3.2.16.2.1.19`
wfDCMRmonObjectSupportAllows a user to specify whether they want to access RMON and RMON2 stats rmon2(2), or just RMON stats rmon(1) from a specific DCM. This attribute is only used when two DCMs are present on a system. If only one DCM is present the default value will be rmon(2) and sets to this attribute will have no affect.rw Enumeration `.1.3.6.1.4.1.18.3.3.2.16.2.1.20`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.2.1.20`
wfDCMStreamTableTable containing DCM stream recordsobsolete SEQUENCE OF WfDCMStreamEntry `.1.3.6.1.4.1.18.3.3.2.16.3`	SEQUENCE OF WfDCMStreamEntry	`.1.3.6.1.4.1.18.3.3.2.16.3`
wfDCMStreamEntryInformation concerning a specific DCM stream entry. Each stream entry corresponds to the interface the DCM is associated with.obsolete WfDCMStreamEntry `.1.3.6.1.4.1.18.3.3.2.16.3.1`	WfDCMStreamEntry	`.1.3.6.1.4.1.18.3.3.2.16.3.1`
wfDCMStreamDCMIndexAn index that identifies the DCM entry of which this stream is associated with.roobsolete INTEGER `.1.3.6.1.4.1.18.3.3.2.16.3.1.1`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.3.1.1`
wfDCMStreamIndexAn index that uniquely identifies the particular stream this entry is associated with.roobsolete INTEGER `.1.3.6.1.4.1.18.3.3.2.16.3.1.2`	INTEGER	`.1.3.6.1.4.1.18.3.3.2.16.3.1.2`
wfDCMStreamDisableEnables or Disables DCM streamroobsolete Enumeration `.1.3.6.1.4.1.18.3.3.2.16.3.1.3`	Enumeration	`.1.3.6.1.4.1.18.3.3.2.16.3.1.3`
wfDCMStreamDataSourceThis object identifies the source of the data that this DCM stream entry is configured to analyze. This is the ifIndex value of the stream(interface).roobsolete OBJECT IDENTIFIER `.1.3.6.1.4.1.18.3.3.2.16.3.1.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.18.3.3.2.16.3.1.4`