Wellfleet-CES-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
42
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
42 total| Object Name |
|---|
wfAtmCESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.23.4 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.4.23.4 |
wfAtmCESObjects OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.23.4.1 |
wfAtmCESConfTableThe CES configuration table used to manage interworking
between CBR interfaces or channels and ATM Virtual Channel
Links (VCLs). SEQUENCE OF WfAtmCESConfEntry .1.3.6.1.4.1.18.3.4.23.4.1.1 |
wfAtmCESConfEntryAn entry in the CES configuration table. There is one
entry in the table per CES entity, mapping one CBR
interface, channel, or bundle to an ATM VCL. WfAtmCESConfEntry .1.3.6.1.4.1.18.3.4.23.4.1.1.1 |
wfAtmCESConfDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.1 |
wfAtmCESConfDisableEnable/Disable MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.2 |
wfAtmCESConfAtmIndexThe value of this object is equal to the line number
value of the ATM Port interface mapped through this CES IWF
to a CBR interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.3 |
wfAtmCESConfCbrIndexThe value of this object is equal to the line number value
of the CBR interface, channel, or bundle that is being
cross-connected to this ATM VCL.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.4 |
wfAtmCESConfAtmVpiThe value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.5 |
wfAtmCESConfAtmVciThe value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.6 |
wfAtmCESConfCfgAtmVpiThe value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. Setting this attribute when wfAtmCESConfConnType
is set to activeSvc or passiveSvc has no effect.rw INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.7 |
wfAtmCESConfCfgAtmVciThe value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. Setting this attribute when wfAtmCESConfConnType
is set to activeSvc or passiveSvc has no effect.rw INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.8 |
wfAtmCESConfVclCctIdentifies the object which corresponds to the Wellfleet circuit
number.rw INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.9 |
wfAtmCESConfCbrServiceDefine if DSx/Ex service is structured or unstructured. A
structured(2) interface is some nx64kbKbps. An unstructured
(1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps,
or 34.368 Mbps. unstructured(1) passes all bits through the
ATM network. strucutured(2) passes data bits through the
ATM network, and may also pass signalling bits.
At this time, only unstructured mode is defined for the
44.736 Mbps and 34.368 Mbps services.rw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.10 |
wfAtmCESConfCbrClockModeDefine if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.
For structured modes this value, if present, must be set to
synchronous(1).rw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.11 |
wfAtmCESConfCasThis parameter selects which AAL1 Format should be used:
Basic does not carry CAS bits, and uses a single 125 usec frame.
e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a
multiframe structure for E1, DS1 SF, DS1 ESF and J2
respectively.
This applies to structured interfaces only. Default is
basic (1). For unstructured interfaces this value, if present,
must be set to the default of basic (1).rw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.12 |
wfAtmCESConfPartialFillIf partial cell fill is used, the number of user octets per
cell must be set with this parameter. Setting this parameter
to zero disables partial cell fill, and causes all cells to
be completely filled before they are sent.rw INTEGER (0 .. 47) .1.3.6.1.4.1.18.3.4.23.4.1.1.1.13 |
wfAtmCESConfBufMaxSizeDefine maximum size in 10 microsecond increments of the
reassembly buffer. Some implementations may want allow the
maximum buffer size to be programmed to a size less than the
physical limit to reduce the maximum delay through a circuit.rw INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.14 |
wfAtmCESConfCdvRxTThe maximum cell arrival jitter in 10 usec increments that
the reassembly process will tolerate in the cell stream
without producing errors on the CBR service interface.rw INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.1.1.15 |
wfAtmCESConfCellLossIntegrationPeriodThe time in milliseconds for the cell loss integration period.
If cells are continuously lost for this period of time,
wfAtmCESCellLossStatus is set to loss (2). The
default definition is 2500.rw INTEGER (1000 .. 65535) .1.3.6.1.4.1.18.3.4.23.4.1.1.1.16 |
wfAtmCESConfConnTypeThe type of ATM connectivity between associated CES IWF's.
Valid values are:
other - none of the types specified below
pvc - supporting connectivity is a permanent
virtual connection
activeSvc - attempt calls whenever none established
passiveSvc - accept callsrw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.17 |
wfAtmCESConfLocalAddrThe ATM address of the local CES IWF process. This address
may be used by the automatic SVC establishment procedures to
identify the intended recipient CES IWF of an incoming automatic
SVC call request. Optionally, the MAX-ACCESS of this object
may be read-only, for those implementations where it is
not desired to manually configure this address.rw OCTET STRING .1.3.6.1.4.1.18.3.4.23.4.1.1.1.18 |
wfAtmCESConfAdminStatusThe desired administrative status of the CES interworking
function. The up and down states indicate that the traffic
flow is enabled or disabled respectively across the CES
interworking function.rw Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.19 |
wfAtmCESConfOperStatusThe operational status of the CES interworking function.
The up and down states indicate that the traffic flow is
enabled or disabled respectively across the CES interworking
function. The unknown state indicates that the state of the
CES interworking function cannot be determined. The state
will be down or unknown if the supporting CBR or ATM
interfaces are down or unknown, respectively.ro Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.1.1.20 |
wfAtmCESStatsTableThe CES AAL1 statistical data table. SEQUENCE OF WfAtmCESStatsEntry .1.3.6.1.4.1.18.3.4.23.4.1.2 |
wfAtmCESStatsEntryAn entry in the CES AAL1 Stats table. There is one
entry in this table corresponding to each entry in the
wfAtmCESConfTable. WfAtmCESStatsEntry .1.3.6.1.4.1.18.3.4.23.4.1.2.1 |
wfAtmCESStatsAtmIndexThe value of this object is equal to the line number
value of the ATM Port interface mapped through this CES IWF
to a CBR interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.2.1.1 |
wfAtmCESStatsAtmVpiThe value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.2.1.2 |
wfAtmCESStatsAtmVciThe value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.2.1.3 |
wfAtmCESStatsCbrIndexThe value of this object is equal to the line number value
of the CBR interface, channel, or bundle that is being
cross-connected to this ATM VCL.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.2.1.4 |
wfAtmCESStatsVclCctIdentifies the object which corresponds to the Wellfleet circuit
number.ro INTEGER .1.3.6.1.4.1.18.3.4.23.4.1.2.1.5 |
wfAtmCESStatsReassCellsThis count gives the number of cells played out to the
CES Service Interface. It excludes cells that were
discarded for any reason, including cells that were not used
due to being declared misinserted, or discarded while the
reassembler was waiting to achieve synchronization.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.6 |
wfAtmCESStatsHdrErrorsThe count of the number of AAL1 header errors detected,
including those corrected. Header errors include correctable
and uncorrectable CRC, plus bad parity.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.7 |
wfAtmCESStatsPointerReframesThis records the count of the number of events in which the
AAL1 reassembler found that an SDT pointer is not where it is
expected, and the pointer must be reacquired. This count is
only meaningful for structured CES modes, as unstructured CES
modes do not use pointers. For unstructured CES modes, this
count, if present, should indicate zero.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.8 |
wfAtmCESStatsPointerParityErrorsThis records the count of the number of events in which the
AAL1 reassembler detects a parity check failure at the point
where a structured data pointer is expected. This count is only
meaningful for structured CES modes, as unstructured CES modes
do not use pointers. For unstructured CES modes, this count, if
present, should indicate zero.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.9 |
wfAtmCESStatsAal1SeqErrorsNumber of times that the sequence number of an incoming AAL1
Type 1 SAR-PDU causes a transition from the 'sync' state to
the 'out of sequence' state, as defined by ITU-T I.363.1.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.10 |
wfAtmCESStatsLostCellsNumber of lost cells, as detected by the AAL1 sequence number
processing, for example. This records the count of the number
of cells detected as lost in the network prior to the
destination CES IWF AAL1 layer processing.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.11 |
wfAtmCESStatsMisinsertedCellsNumber of AAL1 sequence violations which the AAL Convergence
sublayer interprets as a misinserted cell, as defined by
ITU-T I.363.1.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.12 |
wfAtmCESStatsBufUnderflowsNumber of buffer underflows. This records the count of the
number of times the CES reassembly buffer underflows. In the
case of a continuous underflow caused by a loss of ATM cell
flow, a single buffer underflow should be counted. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer), then either buffer underflow
will cause this count to be incremented.ro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.13 |
wfAtmCESStatsBufOverflowsNumber of buffer overflows. This records the count of the
number of times the CES reassembly buffer overflows. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer, then either buffer overflow will
cause this count to be incrementedro Counter .1.3.6.1.4.1.18.3.4.23.4.1.2.1.14 |
wfAtmCESStatsCellLossStatusWhen cells are continuously lost for the number of milliseconds
specified by wfAtmCESConfCellLossIntegrationPeriod, the value is set
to loss (2). When cells are no longer lost, the value is set
to noLoss (1).ro Enumeration .1.3.6.1.4.1.18.3.4.23.4.1.2.1.15 |