Wellfleet-BRIDGE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
43
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
wfBrLearning OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.1.1.1 |
wfBrTp OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1.1.1 |
wfBrTpBaseDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the bridge.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.1 |
wfBrTpBaseEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable the bridge.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.2 |
wfBrTpBaseStateThe current state of the entire Bridge.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.3 |
wfBrTpBaseFDBEntriesThe current number of forward table entriesro Counter .1.3.6.1.4.1.18.3.5.1.1.1.1.4 |
wfBrTpBaseFDBSizeSize of the bridge table - only looked at at boot timerw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.5 |
wfBrTpBaseFDBEnableDisable placing fdb entries on the mib.
This attribute only inspected at boot time.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.6 |
wfBrTpBaseFlushFwdTblFlush the bridge fwd tablesrw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.7 |
wfBrTpBaseFDBPortChangeThe amount that all the stations move from
one port to anotherard table entriesro Counter .1.3.6.1.4.1.18.3.5.1.1.1.1.8 |
wfBrTpFdbTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame.
inst = wfBrTpBaseFdbAddress SEQUENCE OF WfBrTpFdbEntry .1.3.6.1.4.1.18.3.5.1.1.1.2 |
wfBrTpFdbEntryAn entry in the wfBrTpFdbTable. WfBrTpFdbEntry .1.3.6.1.4.1.18.3.5.1.1.1.2.1 |
wfBrTpBaseFdbAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.1.1.2.1.1 |
wfBrTpBaseFdbPortThe port number on which the wfBrTpBaseFdbAddress
was learned.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.1.2.1.2 |
wfBrTpBaseFdbStatusThe status of this entry. The meanings of the
values are:
learned(3) : the value of the corresponding
instance of wfBrTpFdbPort was
learned, and is being used.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.2.1.3 |
wfBrTpAggrStats OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1.1.3 |
wfBrTpAggrInPktsThe total number of packets received by the transparent bridgero Counter .1.3.6.1.4.1.18.3.5.1.1.1.3.1 |
wfBrTpAggrOutPktsThe total number of packets sent by the transparent bridgero Counter .1.3.6.1.4.1.18.3.5.1.1.1.3.2 |
wfBrTpAggrDiscardPktsThe total number of packets discarded by the transparent bridgero Counter .1.3.6.1.4.1.18.3.5.1.1.1.3.3 |
wfBrTpInterfaceTableA table that contains information about every
interface that is associated with this
transparent bridge.
inst_id[1] = wfBrTpInterfaceCircuit SEQUENCE OF WfBrTpInterfaceEntry .1.3.6.1.4.1.18.3.5.1.1.3 |
wfBrTpInterfaceEntryAn entry in wfBrTpInterface. WfBrTpInterfaceEntry .1.3.6.1.4.1.18.3.5.1.1.3.1 |
wfBrTpInterfaceDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an interface.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.1 |
wfBrTpInterfaceEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an interface.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.2 |
wfBrTpInterfaceStateThe current state of the interface.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.3 |
wfBrTpInterfaceCircuitThe circuit that this interface runs over.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.3.1.4 |
wfBrTpInterfaceMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.3.1.5 |
wfBrTpInterfaceInFramesThe number of frames that have been received by
this interface from its circuit.ro Counter .1.3.6.1.4.1.18.3.5.1.1.3.1.6 |
wfBrTpInterfaceOutFramesThe number of frames that have been transmitted
by this interface to its circuit.ro Counter .1.3.6.1.4.1.18.3.5.1.1.3.1.7 |
wfBrTpInterfaceInDiscardsCount of valid frames received which were
received on this interface but then discarded.ro Counter .1.3.6.1.4.1.18.3.5.1.1.3.1.8 |
wfBrTpInterfaceTranslationDisableEnable/Disable translation bridging parameter. Default is enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.9 |
wfBrTrafficFilterTableBridge Traffic Filters SEQUENCE OF WfBrTrafficFilterEntry .1.3.6.1.4.1.18.3.5.1.1.4 |
wfBrTrafficFilterEntryAn entry in WfBrTrafficFilterTable. WfBrTrafficFilterEntry .1.3.6.1.4.1.18.3.5.1.1.4.1 |
wfBrTrafficFilterCreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.4.1.1 |
wfBrTrafficFilterEnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.4.1.2 |
wfBrTrafficFilterStatusDefines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.4.1.3 |
wfBrTrafficFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.1.1.4.1.4 |
wfBrTrafficFilterDefinitionThe filter rule definition.rw Opaque .1.3.6.1.4.1.18.3.5.1.1.4.1.5 |
wfBrTrafficFilterReservedReserved field.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.6 |
wfBrTrafficFilterCircuitThe ID of the Bridge Circuit to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.7 |
wfBrTrafficFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.8 |
wfBrTrafficFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.9 |
wfBrTrafficFilterNamename of the rule numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.1.1.4.1.10 |