Wellfleet-ATM-LE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-ATM-LE-MIB.
153
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
153 total| Object Name |
|---|
RFC1155-SMIATM LEC Interface table - One per LEC Client
This table deals with configuration and operational status SEQUENCE OF WfAtmLecConfigEntry .1.3.6.1.4.1.18.3.5.9.5.20.1 |
wfAtmLecStatusTableLan Emulation Status Group
Read-only table containing identification, status, and operational
information about the LAN Emulation Clients this agent manages SEQUENCE OF WfAtmLecStatusEntry .1.3.6.1.4.1.18.3.5.9.5.20.2 |
wfAtmLecStatusEntryper LEC Client objects - wfAtmLecCct corresponds to Wellfleet
circuit number WfAtmLecStatusEntry .1.3.6.1.4.1.18.3.5.9.5.20.2.1 |
wflecStatusCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.2.1.1 |
wflecPrimaryAtmAddressC1 - LE Client's ATM Address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.2.1.2 |
wflecIDC14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.'ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.2.1.3 |
wflecInterfaceStateIndicates the state for the LE Clientro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.2.1.4 |
wflecLastFailureRespCodeFailure response code.
Status code from the last failed Configure response
or Join response. Failed responses are those for
which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE
frame contains a non-zero code, or fails to arrive
within a timeout period.
If none of this client's requests have failed, this
object has the value 'none'.
If the failed response contained a STATUS code that
is not defined in the LAN Emulation specification,
this object has the value 'undefinedError'.
The value 'timeout' is self-explanatory.
Other failure codes correspond to those defined in
the specification, although they may have different
numeric values.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.2.1.5 |
wflecLastFailureStateLast failure state
The state this client was in when it updated the
'lecLastFailureRespCode'.
If 'lecLastFailureRespCode' is 'none', this object
has the value initialState(1).ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.2.1.6 |
wflecProtocolThe LAN Emulation protocol which this client supports,
and specifies in its LE_JOIN_REQUESTs.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.2.1.7 |
wflecVersionThe LAN Emulation protocol version which this client supports,
and specifies in its LE_JOIN_REQUESTs.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.2.1.8 |
wflecTopologyChangeC19 Topology Change. Boolean indication that the LE Client is
using the Forward Delay Time C18, instead of the Ageing Time C17, to
age entries in its LE-ARP cache.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.2.1.9 |
wflecConfigServerAtmAddressThe ATM address of the LECS for this Clientro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.2.1.10 |
wflecConfigSourceIndicates whether this LAN Emulation Client used the
LAN Emulation Configuration Server, and, if so, what
method it used to establish the Configuration Direct
VCC.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.2.1.11 |
wflecActualLanTypeC2 - LEC LAN Type
The data frame format that this LAN Emulation Client
is using right now. This may come from
lecConfigLanType,
the LAN Emulation Configuration Server, or
the LAN Emulation Serverro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.2.1.12 |
wflecActualMaxDataFrameSizeC3 Maximum Data Frame Size.
The maximum data frame size that this LAN Emulation
client is using right now. This may come from
lecConfigLanType,
the LAN Emulation Configuration Server, or
the LAN Emulation Serverro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.2.1.13 |
wflecActualLanNameC5 ELAN Name.
The identity of the emulated LAN which this client
last joined, or wishes to join. This may come from
lecConfigLanType,
the LAN Emulation Configuration Server, or
the LAN Emulation Serverro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.5.20.2.1.14 |
wflecActualLesAtmAddressC9 LE Server ATM Address.
The LAN Emulation Server address currently in use or
most recently attempted.
If no LAN Emulation Server attachment has been tried,
this object's value is the zero-length string.'ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.2.1.15 |
wflecProxyClientC4 Proxy
When a client joins an ATM emulated LAN, it indicates
whether it wants to act as a proxy.
Proxy clients are allowed to represent unregistered
MAC addresses, and receive copies of LE_ARP_REQUEST
frames for such addresses.'ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.2.1.16 |
wfAtmLecOperConfigTableATM LEC Interface table - One per LEC Client
This table deals with configuration and operational status SEQUENCE OF WfAtmLecOperConfigEntry .1.3.6.1.4.1.18.3.5.9.5.20.3 |
wfAtmLecOperConfigEntryper LEC Operation Config objects - wfAtmLecOperConfigCct corresponds to
Wellfleet circuit number WfAtmLecOperConfigEntry .1.3.6.1.4.1.18.3.5.9.5.20.3.1 |
wflecOperConfigCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.1 |
wflecOperConfigControlTimeoutC7 Control Time-out.
Time out period used for timing out most request/response
control frame most request/response control frame interactions.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.2 |
wflecOperConfigMaxUnknownFrameCountC10 Maximum Unknown Frame Count. This parameter MUST be less than
or equal to 10. (See parameter C11)ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.3 |
wflecOperConfigMaxUnknownFrameTimeC11 Maximum Unknown Frame Time. This parameter MUST be greater
than or equal to 1.0 seconds. Within the period of time defined by
the Maximum Unknown Frame Time, a LE Client will send no more than
Maximum Unknown Frame Count frames to a given MAC address or Route
Designator without also initiating the address resolution protocol to
resolve that MAC address or Route Designator. This time value is
expressed in seconds.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.4 |
wflecOperConfigVccTimeoutPeriodC12 VCC Timeout Period.
A LE Client may release any Data Direct or Multicast Send VCC that it
has not used to transmit or receive any data frames for the length of
the VCC Timeout Period. This time value is expressed in seconds.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.5 |
wflecOperConfigMaxRetryCountC13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a
given frame's LAN destination more than Maximum Retry Count times,
after which it must discard the frame.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.6 |
wflecOperConfigAgingTimeC17 Aging Time. The maximum time that a LE Client will maintain
an entry in its LE-ARP cache in the absence of a verification of that
relationship.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.7 |
wflecOperConfigForwardDelayTimeC18 Forward Delay Time. The maximum time that a LE Client will
maintain an entry in its LE-ARP cache in the absence of a verification
of that relationship, so long as the Topology Change flag C19 is true.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.8 |
wflecOperConfigTopologyChangeC19 Topology Change. Boolean indication that the LE Client is
using the Forward Delay Time C18, instead of the Ageing Time C17, to
age entries in its LE-ARP cache.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.9 |
wflecOperConfigExpectedArpResponseTimeC20 Expected LE_ARP Reponse Time. The maximum time (seconds)
that the LEC expects an LE_ARP_REQUEST/
LE_ARP_RESPONSE cycle to take. Used for retries
and verifies.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.10 |
wflecOperConfigFlushTimeOutC21 Flush Time-out. Time limit (seconds) to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
been sent before taking recovery action.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.11 |
wflecOperConfigPathSwitchingDelayC22 Path Switching Delay. The time (seconds) since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.12 |
wflecOperConfigLocalSegmentIDC23 Local Segment ID. The segment ID of the emulated
LAN. This is only required for IEEE 802.5 clients
that are Source Routing bridges.'ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.13 |
wflecOperConfigMulticastSendTypeC24 Multicast Send VCC Type. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
This is the method to be used by the LE Client
when specifying traffic parameters when it sets
up the Multicast Send VCC for this emulated LAN.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.14 |
wflecOperConfigMulticastSendAvgRateC25 Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Sustained Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.15 |
wflecOperConfigMulticastSendPeakRateC26 Multicast Send VCC PeakRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Peak Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.16 |
wflecOperConfigConnectionCompleteTimerC28 Connection Complete Timer. Optional. In
Connection Establishment this is the time period
in which data or a READY_IND message is expected
from a Calling Party.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.3.1.17 |
wfAtmLecStatisticsTableTable of statistics SEQUENCE OF WfAtmLecStatisticsEntry .1.3.6.1.4.1.18.3.5.9.5.20.4 |
wfAtmLecStatisticsEntryEntry contains statistics for each LEC WfAtmLecStatisticsEntry .1.3.6.1.4.1.18.3.5.9.5.20.4.1 |
wflecArpRequestsOutThe number of MAC-to-ATM ARP requests made by this
LAN Emulation client over the LUNI associated with
this emulated packet interface.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.1 |
wflecArpRequestsInThe number of MAC-to-ATM ARP requests received by
this LAN Emulation client over the LUNI associated
with this emulated packet interface.
Requests may arrive on the Control Direct VCC or on
the Control Distribute VCC, depending upon how the
LES is implemented and the chances it has had for
learning. This counter covers both VCCs.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.2 |
wflecArpRepliesOutThe number of MAC-to-ATM ARP replies sent by this
LAN Emulation client over the LUNI associated with
this emulated packet interface.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.3 |
wflecArpRepliesInThe number of MAC-to-ATM ARP replies received by
this LAN Emulation client over the LUNI associated
with this emulated packet interface. This count
includes all such replies, whether solicited or not.
Replies may arrive on the Control Direct VCC or on
the Control Distribute VCC, depending upon how the
LES is implemented. This counter covers both VCCs.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.4 |
wflecControlFramesOutThe total number of control packets sent by this
LAN Emulation client over the LUNI associated with
this emulated packet interface.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.5 |
wflecControlFramesInThe total number of control packets received by this
LAN Emulation client over the LUNI associated with
this emulated packet interfacero Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.6 |
wflecSvcFailuresThe number of SVCs which this client tried to, but failed to, open.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.7 |
wflecStatisticsCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.4.1.8 |
wflecUnknownFramesDroppedThe number of frames that have been dropped due to unknown frame pacing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.9 |
wflecInDataFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.10 |
wflecInUnicastFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.11 |
wflecInUnicastOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.12 |
wflecInMulticastFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.13 |
wflecInMulticastOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.14 |
wflecInBroadcastFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.15 |
wflecInBroadcastOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.16 |
wflecOutDataFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.17 |
wflecOutUnknownFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.18 |
wflecOutUnknownOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.19 |
wflecOutMulticastFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.20 |
wflecOutMulticastOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.21 |
wflecOutBroadcastFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.22 |
wflecOutBroadcastOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.23 |
wflecOutUnicastFramesro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.24 |
wflecOutUnicastOctetsro Counter .1.3.6.1.4.1.18.3.5.9.5.20.4.1.25 |
wfAtmLecServerVccTableLan Emulation Client - Server VCC Table SEQUENCE OF WfAtmLecServerVccEntry .1.3.6.1.4.1.18.3.5.9.5.20.5 |
wfAtmLecServerVccEntryEntry contains statistics for each LEC WfAtmLecServerVccEntry .1.3.6.1.4.1.18.3.5.9.5.20.5.1 |
wflecConfigDirectInterfaceThe interface associated with the Configuration Direct VCC. If no
Configuration Direct VCC exists, this object has the value 0. Otherwise,
the objects
( wflecConfigDirectInterface,
wflecConfigDirectVPI, wflecConfigDirectVCI )
identify the circuitro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.1 |
wflecConfigDirectVpiIf the Configuration Direct VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.2 |
wflecConfigDirectVciIf the Configuration Direct VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.3 |
wflecControlDirectInterfaceThe interface associated with the Control Direct VCC. If no
Control Direct VCC exists, this object has the value 0. Otherwise,
the objects
( wflecControlDirectInterface,
wflecControlDirectVPI, wflecControlDirectVCI )
identify the circuitro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.4 |
wflecControlDirectVpiIf the Control Direct VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.5 |
wflecControlDirectVciIf the Control Direct VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.6 |
wflecControlDistributeInterfaceThe interface associated with the Control Distribute VCC. If no
Control Distribute VCC exists, this object has the value 0. Otherwise,
the objects
( wflecControlDistributeInterface,
wflecControlDistributeVPI, wflecControlDistributeVCI )
identify the circuitro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.7 |
wflecControlDistributeVpiIf the Control Distribute VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.8 |
wflecControlDistributeVciIf the Control Distribute VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.9 |
wflecMulticastSendInterfaceThe interface associated with the Multicast Send VCC. If no
Multicast Send VCC exists, this object has the value 0. Otherwise,
the objects
( wflecMulticastSendInterface,
wflecMulticastSendVPI, wflecMulticastSendVCI )
identify the circuitro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.10 |
wflecMulticastSendVpiIf the Multicast Send VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.11 |
wflecMulticastSendVciIf the Multicast Send VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.12 |
wflecMulticastForwardInterfaceThe interface associated with the Multicast Forward VCC. If no
Multicast Forward VCC exists, this object has the value 0. Otherwise,
the objects
( wflecMulticastForwardInterface,
wflecMulticastForwardVPI, wflecMulticastForwardVCI )
identify the circuitro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.13 |
wflecMulticastForwardVpiIf the Multicast Forward VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.14 |
wflecMulticastForwardVciIf the Multicast Forward VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.15 |
wflecServerVccCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.5.1.16 |
wfAtmLecAtmAddressTableLAN Emulation Client - ATM Addresses table SEQUENCE OF WfAtmLecAtmAddressEntry .1.3.6.1.4.1.18.3.5.9.5.20.6 |
wfAtmLecAtmAddressEntryEntry contains ATM address for a LE CLient WfAtmLecAtmAddressEntry .1.3.6.1.4.1.18.3.5.9.5.20.6.1 |
wflecAtmAddressThe ATM address this row describes. This could be
either a primary address or a secondary address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.6.1.1 |
wflecAtmAddressStatusUsed to create and delete rows in this table.
A management station cannot disable an ATM address while the client
is uprw Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.6.1.2 |
wflecAtmAddressCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.6.1.3 |
wfAtmLecMacAddressTableLAN Emulation Client - MAC Addresses table SEQUENCE OF WfAtmLecMacAddressEntry .1.3.6.1.4.1.18.3.5.9.5.20.7 |
wfAtmLecMacAddressEntryEntry contains MAC address for a LE CLient WfAtmLecMacAddressEntry .1.3.6.1.4.1.18.3.5.9.5.20.7.1 |
wflecMacAddressThe MAC address this row describes. This could be
either a primary address or a secondary address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.7.1.1 |
wflecMacAddressAtmBindingThe ATM Address registered for wflecMacAddressro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.7.1.2 |
wflecMacAddressCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.7.1.3 |
wfAtmLeArpTableLan Emulation Client ARP Cache Group
This table provides access to an ATM LAN Emulation Client's MAC-to-ATM
ARP cache. It contains entries for unicast addresses and for the
broadcast address, but not for multicast MAC addresses. SEQUENCE OF WfAtmLeArpEntry .1.3.6.1.4.1.18.3.5.9.5.20.8 |
wfAtmLeArpEntryentry of MAC address to ATM address WfAtmLeArpEntry .1.3.6.1.4.1.18.3.5.9.5.20.8.1 |
wfleArpMacAddressThe MAC address for which this cache entry provides a translation.
Since ATM LAN Emulation uses an ARP protocol to locate broadcast and
multicast servers, the value of this object could be the broadcast MAC
addressro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.8.1.1 |
wfleArpAtmAddressThe ATM address of the Broadcast & Unknown Server or LAN Emulation
Client whose MAC address is stored in 'leArpMacAddress'.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.8.1.2 |
wfleArpIsRemoteAddressIndicates whether the 'leArpMACaddress' belongs to a
remote client.
true(1)
The address is believed to be remote - or its
local/remote status is unknown.
For an entry created via the LE_ARP mechanism,
this corresponds to the 'Remote address' flag
being set in the LE_ARP_RESPONSE.
false(2)
The address is believed to be local - that is
to say, registered with the LES by the client
whose ATM address is leArpAtmAddress.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.8.1.3 |
wfleArpEntryTypeIndicates how this LE_ARP table entry was created and
whether it is aged.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.8.1.4 |
wfleArpRowStatusRow status of enable or disablerw Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.8.1.5 |
wfleArpCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.8.1.6 |
wfleArpVpiThis is the Vpi will be used for this MAC addressro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.8.1.7 |
wfleArpVciThis is the Vci will be used for this MAC addressro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.8.1.8 |
wfAtmLeRDArpTableLan Emulation Client RDArp Cache Group
This table provides access to an ATM LAN Emulation Client's
Route Descriptor-to-ATM ARP cache. SEQUENCE OF WfAtmLeRDArpEntry .1.3.6.1.4.1.18.3.5.9.5.20.9 |
wfAtmLeRDArpEntryentry of Route Descriptor to ATM address WfAtmLeRDArpEntry .1.3.6.1.4.1.18.3.5.9.5.20.9.1 |
wfleRDArpSegmentIDThe LAN ID portion of the Route Descriptor associated with
this ARP cache entry.ro INTEGER ( 0..4095 ) .1.3.6.1.4.1.18.3.5.9.5.20.9.1.1 |
wfleRDArpBridgeNumberThe Bridge Number portion of the Route Descriptor associated
with this ARP cache entry.ro INTEGER ( 0..15 ) .1.3.6.1.4.1.18.3.5.9.5.20.9.1.2 |
wfleRDArpAtmAddressThe ATM address of the LAN Emulation
Client which is associated with the route descriptor.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.9.1.3 |
wfleRDArpEntryTypeIndicates how this RD LE_ARP table entry was created and
whether it is aged.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.9.1.4 |
wfleRDArpRowStatusRow status of enable or disablerw Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.9.1.5 |
wfleRDArpCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.9.1.6 |
wfleRDArpVpiThis is the Vpi will be used for this Route Descriptorro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.9.1.7 |
wfleRDArpVciThis is the Vci will be used for this Route Descriptorro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.9.1.8 |
wfAtmLecConfigLesTableAddress of Configured LES per LEC SEQUENCE OF WfAtmLecConfigLesEntry .1.3.6.1.4.1.18.3.5.9.5.20.10 |
wfAtmLecConfigLesEntryAn entry in the ATM Le Table WfAtmLecConfigLesEntry .1.3.6.1.4.1.18.3.5.9.5.20.10.1 |
wfAtmLecConfigLesDeleteCreate or Delete this LES Atm Address from the listrw Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.10.1.1 |
wfAtmLecConfigLesEnableEnable or disable this LES Atm Addressrw Enumeration .1.3.6.1.4.1.18.3.5.9.5.20.10.1.2 |
wfAtmLecConfigLesCctCCT number for this LECro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.10.1.3 |
wfAtmLecConfigLesIndexa unique one up type number to create a listro INTEGER .1.3.6.1.4.1.18.3.5.9.5.20.10.1.4 |
wfAtmLecConfigLesAddressAtm address of the LESrw OCTET STRING .1.3.6.1.4.1.18.3.5.9.5.20.10.1.5 |
wfAtmLecConfigLesNameUser name for the LESrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.5.20.10.1.6 |
wfAtmLecConfigEntryper LEC Client objects - wfAtmLecCct corresponds to Wellfleet
circuit number WfAtmLecConfigEntry .wfAtmLecConfigTable.1 |
wflecConfDeleteIndication to create or delete an ATM LE Client Config Entry
from the MIBrw Enumeration .wfAtmLecConfigTable.1.1 |
wflecRowStatusIndication to create or delete an ATM LE Client. This will
remove the LEC from the Emulated LAN. However, the instance is
not removed from the MIBrw Enumeration .wfAtmLecConfigTable.1.2 |
wflecConfigCctThis corresponds to the Wellfleet circuit numberro INTEGER .wfAtmLecConfigTable.1.3 |
wflecOwnerThe entity that configured this entry and is therefore
using the resources assigned to it.rw DisplayString (SNMPv2-TC) .wfAtmLecConfigTable.1.4 |
wflecConfigModeIndicates whether this LAN Emulation Client should
auto-configure the next time it is (re)started.rw Enumeration .wfAtmLecConfigTable.1.5 |
wflecConfigLanTypeC2 - LEC LAN Type
The data frame format which this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.rw Enumeration .wfAtmLecConfigTable.1.6 |
wflecConfigMaxDataFrameSizeC3 Maximum Data Frame Size.
The maximum data frame size which this client will
use the next time it returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
lecActualMaxDataFrameSize will be.'rw Enumeration .wfAtmLecConfigTable.1.7 |
wflecConfigLanNameC5 ELAN Name.
The ELAN Name this client will use the next time it
returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
lecActualMaxDataFrameSize will be.'rw DisplayString (SNMPv2-TC) .wfAtmLecConfigTable.1.8 |
wflecConfigLesAtmAddressC9 LE Server ATM Address.
The LAN Emulation Server which this client will use
the next time it is started in manual configuration
mode.
When lecConfigMode is 'automatic', there is no need
to set this address, and no advantage to doing so.
The client will use the LECS to find a LES, putting
the auto-configured address in lecActualLesAtmAddress
while leaving lecConfigLesAtmAddress alone.rw OCTET STRING .wfAtmLecConfigTable.1.9 |
wflecControlTimeoutC7 Control Time-out.
Time out period used for timing out most request/response
control frame most request/response control frame interactions.rw INTEGER .wfAtmLecConfigTable.1.10 |
wflecMaxUnknownFrameCountC10 Maximum Unknown Frame Count. This parameter MUST be less than
or equal to 10. (See parameter C11)rw INTEGER .wfAtmLecConfigTable.1.11 |
wflecMaxUnknownFrameTimeC11 Maximum Unknown Frame Time. This parameter MUST be greater
than or equal to 1.0 seconds. Within the period of time defined by
the Maximum Unknown Frame Time, a LE Client will send no more than
Maximum Unknown Frame Count frames to a given MAC address or Route
Designator without also initiating the address resolution protocol to
resolve that MAC address or Route Designator. This time value is
expressed in seconds.rw INTEGER .wfAtmLecConfigTable.1.12 |
wflecVccTimeoutPeriodC12 VCC Timeout Period.
A LE Client may release any Data Direct or Multicast Send VCC that it
has not used to transmit or receive any data frames for the length of
the VCC Timeout Period. This time value is expressed in seconds.rw Enumeration .wfAtmLecConfigTable.1.13 |
wflecMaxRetryCountC13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a
given frame's LAN destination more than Maximum Retry Count times,
after which it must discard the frame.rw INTEGER .wfAtmLecConfigTable.1.14 |
wflecAgingTimeC17 Aging Time. The maximum time that a LE Client will maintain
an entry in its LE-ARP cache in the absence of a verification of that
relationship.rw INTEGER .wfAtmLecConfigTable.1.15 |
wflecForwardDelayTimeC18 Forward Delay Time. The maximum time that a LE Client will
maintain an entry in its LE-ARP cache in the absence of a verification
of that relationship, so long as the Topology Change flag C19 is true.rw INTEGER .wfAtmLecConfigTable.1.16 |
wflecExpectedArpResponseTimeC20 Expected LE_ARP Reponse Time. The maximum time (seconds)
that the LEC expects an LE_ARP_REQUEST/
LE_ARP_RESPONSE cycle to take. Used for retries
and verifies.rw INTEGER .wfAtmLecConfigTable.1.17 |
wflecFlushTimeOutC21 Flush Time-out. Time limit (seconds) to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
been sent before taking recovery action.rw INTEGER .wfAtmLecConfigTable.1.18 |
wflecPathSwitchingDelayC22 Path Switching Delay. The time (seconds) since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol.rw INTEGER .wfAtmLecConfigTable.1.19 |
wflecLocalSegmentIDC23 Local Segment ID. The segment ID of the emulated
LAN. This is only required for IEEE 802.5 clients
that are Source Routing bridges.'rw INTEGER .wfAtmLecConfigTable.1.20 |
wflecMulticastSendTypeC24 Multicast Send VCC Type. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
This is the method to be used by the LE Client
when specifying traffic parameters when it sets
up the Multicast Send VCC for this emulated LAN.rw Enumeration .wfAtmLecConfigTable.1.21 |
wflecMulticastSendAvgRateC25 Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Sustained Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.rw INTEGER .wfAtmLecConfigTable.1.22 |
wflecMulticastSendPeakRateC26 Multicast Send VCC PeakRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Peak Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.rw INTEGER .wfAtmLecConfigTable.1.23 |
wflecConnectionCompleteTimerC28 Connection Complete Timer. Optional. In
Connection Establishment this is the time period
in which data or a READY_IND message is expected
from a Calling Party.rw INTEGER .wfAtmLecConfigTable.1.24 |
wflecFlushEnableFlush Protocol enable/disable -
ATM_LEC_FLUSH_ENABLED - ATM LE flush protocol is used when switching VCs.
If the Flush timeout (wflecFlushTimeOut) expires data for that MAC address
will start flowing over the old VC again.
ATM_LEC_FLUSH_DISABLED - ATM LE flush protocol is not used. Instead data
for that MAC address will automatically start flowing over the new VC once
the Path Switching delay timeout (wflecPathSwitchingDelay) has expired.rw Enumeration .wfAtmLecConfigTable.1.25 |
wflecConfigRetryThis attribute specifies how many retries should be attempted if any
part of the config phase fails. The config phase starts with setting
up the config direct VC and ends when a JOIN response is received.
The default is 0 which means retry forever with a maximum timeout of
30 seconds between each retry. The time between each retry will start
at 2 seconds and double from that point (never exceeding 30 seconds).rw INTEGER .wfAtmLecConfigTable.1.26 |
wflecMulticastFwdTimeoutThe attribute specifies how many seconds to wait for the Multicast Forward
VC to be set up before retrying. The retry will include closing the
Multicast Send VC (if it has been opened) and reARPing for the BUS. A
successful ARP response will result in the setup of the Multicast Send which
in turn should result in the BUS setting up the Multicast Forward VC.rw Enumeration .wfAtmLecConfigTable.1.27 |
wflecMulticastFwdRetryThe attribute specifies how many retries should be made to get the
Multicast Forward VC setup. The LEC will retry after
wflecMulticastFwdTimeout seconds and will double this timeout for each
each retry which follows. The timeout will not exeed 30 seconds however.
After wflecMulticastFwdRetry retries, the LEC will restart itself. If
wflecMulticastFwdRetry is set to 0 it will retry the BUS phase forever
and will never restart itself.rw Enumeration .wfAtmLecConfigTable.1.28 |
wflecDebugLevelDebug Levels - The level of debug desired from the Portable LEC code
LEC_DBG_OFF - 0
LEC_DBG_WARN - 1
LEC_DBG_ERR - 2
LEC_DBG_MSG - 4
LEC_DBG_DBG - 8
LEC_DBG_VERBOSE - 16
This values above can be used separately, or OR'd together for
a combination of debug levels. For example, to see both WARN and
ERR messages, LEC_DBG_WARN OR LEC_DBG_ERR = 3, so set this object
to 3.rw INTEGER .wfAtmLecConfigTable.1.29 |
wflecConfigLECSAtmAddressThe LE Config Server Address to be used. If left (or set) to NULL_VAL the
well-known LECS ATM address will be used.rw OCTET STRING .wfAtmLecConfigTable.1.30 |
wflecConfigV2CapableIndication to enable or disable LANE V2 support for
this ATM LE Client.rw Enumeration .wfAtmLecConfigTable.1.31 |