Wellfleet-ASYNC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-ASYNC-MIB.
40
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
RFC1155-SMIASYNC line record SEQUENCE OF WfAsyncEntry .1.3.6.1.4.1.18.3.4.3 |
wfAsyncEntryAn entry in the ASYNC table WfAsyncEntry .wfAsyncTable.1 |
wfAsyncDeleteCreate/Delete parameterrw Enumeration .wfAsyncTable.1.1 |
wfAsyncDisableEnable/Disable parameterrw Enumeration .wfAsyncTable.1.2 |
wfAsyncStateLine Driver state variable, Not Present, DSR Wait,
Init, Down, Upro Enumeration .wfAsyncTable.1.3 |
wfAsyncSlotInstance ID Slot, filled in by driverro INTEGER .wfAsyncTable.1.4 |
wfAsyncConnectorInstance ID Connector, filled in by driver. For the ASN
this attribute is an encoded value and is equal to
'module'*10 + 'connector'. Where 'module' is defined in
attribute 86 and 'connector' is defined in attribute 78
of this table. For non-ASN platforms this attribute is
the physical connector number on the slot.ro Enumeration .wfAsyncTable.1.5 |
wfAsyncCctCCT number for this line instancerw INTEGER .wfAsyncTable.1.6 |
wfAsyncMtuMTU parameter, this is buffer size for ASYNC media, fixedrw INTEGER .wfAsyncTable.1.7 |
wfAsyncMadrLine MAC address, fixed - line driver fills in from the 48 bit
address stored in the serial number prom for this connector.ro OCTET STRING .wfAsyncTable.1.8 |
wfAsyncStartProtocolStart protocol selection is provided via this parameter. The
supported protocols can be selected per interface.rw Enumeration .wfAsyncTable.1.9 |
wfAsyncRxOctetsNumber of octets received without errorro Counter .wfAsyncTable.1.10 |
wfAsyncTxOctetsNumber of octets transmitted without errorro Counter .wfAsyncTable.1.11 |
wfAsyncRxErrorsNumber of receive errorsro Counter .wfAsyncTable.1.12 |
wfAsyncTxErrorsNumber of transmission errorsro Counter .wfAsyncTable.1.13 |
wfAsyncRxLackRescsNumber of Rx frames dropped due to lack of buffer resourcesro Counter .wfAsyncTable.1.14 |
wfAsyncTxLackRescsNumber of frames clipped in driver's transmit routine due to transmit
congestion.ro Counter .wfAsyncTable.1.15 |
wfAsyncTxUnderFlowsNumber of transmission underflows, device FIFO went empty before
next DMA request was granted.ro Counter .wfAsyncTable.1.16 |
wfAsyncTxRejectsNumber of reject frames which were transmittedro Counter .wfAsyncTable.1.17 |
wfAsyncRxRejectsNumber of reject frames which were receivedro Counter .wfAsyncTable.1.18 |
wfAsyncRxOverFlowsNumber of receive overflows, device FIFO overflowed before next
DMA cycle granted. No buffer resources available.ro Counter .wfAsyncTable.1.19 |
wfAsyncRxBadOctetsNumber of bad receive frames, caused by FCS errors or non octet aligned.ro Counter .wfAsyncTable.1.20 |
wfAsyncRxRuntsNumber of runt frames receivedro Counter .wfAsyncTable.1.21 |
wfAsyncTxQueueLengthCurrent Transmit Queue Length.ro INTEGER .wfAsyncTable.1.22 |
wfAsyncRxQueueLengthCurrent Receive Queue Length.ro INTEGER .wfAsyncTable.1.23 |
wfAsyncRxReplenMissesNumber of packet buffer misses while attempting to replenish driver
receive ring.ro Counter .wfAsyncTable.1.24 |
wfAsyncLineNumberline number for this line instancerw INTEGER .wfAsyncTable.1.25 |
wfAsyncRemoteAddressRemote TCP host IP addressrw IpAddress .wfAsyncTable.1.26 |
wfAsyncRemotePortRemote port for TCP connectionrw Enumeration .wfAsyncTable.1.27 |
wfAsyncLocalPortLocal port for TCP connectionrw Enumeration .wfAsyncTable.1.28 |
wfAsyncBaudAsync line speedrw Enumeration .wfAsyncTable.1.29 |
wfAsyncIdleTimerAsync line Idle timerrw INTEGER .wfAsyncTable.1.30 |
wfAsyncRxWindowConfigured TCP receive windowrw INTEGER .wfAsyncTable.1.31 |
wfAsyncMinRxWindowsLow-water mark of receive window (for latest connection)ro Counter .wfAsyncTable.1.32 |
wfASyncSecTxQmaxssecondary TX queue hi-water mark (for this connection)ro Counter .wfAsyncTable.1.33 |
wfASyncSecTxQlenssecondary TX queue present valuero Counter .wfAsyncTable.1.34 |
wfAsyncTCPKeepaliveKeepalive timer. A keepalive (probe) message is sent out
if there is no activity in this number of seconds.rw INTEGER .wfAsyncTable.1.35 |
wfAsyncTCPInactivityLimitInactivity limit. Connection (eligable for) reset
if no activity in this number of seconds.rw INTEGER(-65536..65535) .wfAsyncTable.1.36 |
wfAsyncCfgTxQueueLengthConfigured Transmit Queue Length. Values other than zero over-ride the
router selected values. A value of zero has a special meaning. Zero
causes router based default values to be used. Values larger than the
compiled ring size are truncated to the compiled ring size.rw INTEGER .wfAsyncTable.1.37 |
wfAsyncCfgRxQueueLengthConfigured Receive Queue Length. Values other than zero over-ride the
router selected values. A value of zero has a special meaning. Zero
causes router based default values to be used. Values larger than the
compiled ring size are truncated to the compiled ring size.rw INTEGER .wfAsyncTable.1.38 |