Wellfleet-ASR-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-ASR-MIB.
106
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
106 total| Object Name |
|---|
wfAsrBase OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.11.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.9.11.1 |
wfAsrBaseCreateCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete ASR.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.1 |
wfAsrBaseEnableEnable/Disable parameter. Default is enabled.
Users perform a set operation on this
object in order to enable/disable ASR.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.2 |
wfAsrBaseStateThe current state of the entire ASR.ro Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.3 |
wfAsrNextHopRetryLimitSet the number of next hop entries to try to establish
the SVC should the first next hop entry fail.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.1.4 |
wfAsrSecureInFilterEnable or disable inbound packet filtering.
This object will be implemented as part of the
follow on project.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.5 |
wfAsrSecureInValidEnable or disable inbound call validation. This object will
be implemented as part of a follow on project.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.6 |
wfAsrHoldDownTimerThe hold down timer is used to prevent retries to a destination
that the SVC setup process has failed on. This value would be
used if filter/flow spec information is not returned from NHS.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.1.7 |
wfAsrActiveSvcsA count of the SVCs currently active on this router slot.ro Counter .1.3.6.1.4.1.18.3.5.9.11.1.8 |
wfAsrFwdTblEntriesA count of entries in the ASR forward table.ro Counter .1.3.6.1.4.1.18.3.5.9.11.1.9 |
wfAsrFwdTblSeqSequence number used to determine changes to the ASR forward
table.ro Counter .1.3.6.1.4.1.18.3.5.9.11.1.10 |
wfAsrDnsProxyPortDNS proxy port for QOS translation queriesrw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.11 |
wfAsrMaxSessionsMaximum number of TCP/IP sessions which are to be managed by ASR.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.12 |
wfAsrDebugLevelDebug level in which to enable log messages. The
greater the value, the more detailed the log messages.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.1.13 |
wfAsrUseDynRdiscPrefEnable/Disable parameter for ASR to update
the Dynamic Router Discovery Preference value.
If enabled, wfRdiscInterfacePref must be 0 in
order to advertise the ASR Dynamic Preference.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.1.14 |
wfAsrX213PriTableA table used by ASR to convert the X.213 priority value returned
by NHS to a switch specific Value. SEQUENCE OF WfAsrX213PriEntry .1.3.6.1.4.1.18.3.5.9.11.2 |
wfAsrX213PriEntryX.213 conversion table. WfAsrX213PriEntry .1.3.6.1.4.1.18.3.5.9.11.2.1 |
wfAsrX213PriDeleteCreate/delete indicator for X.213 priority table entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.2.1.1 |
wfAsrX213PriLowValLow value of X.213 priority range.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.2.1.2 |
wfAsrX213PriHiValHigh value of X.213 priority range.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.2.1.3 |
wfAsrX213PriSwValSwitch specific X.213 priority value.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.2.1.4 |
wfAsrRtrPriTableA table used by ASR to convert the router priority value
returned by NHS to a router priority queue. SEQUENCE OF WfAsrRtrPriEntry .1.3.6.1.4.1.18.3.5.9.11.3 |
wfAsrRtrPriEntryRouter priority conversion table. WfAsrRtrPriEntry .1.3.6.1.4.1.18.3.5.9.11.3.1 |
wfAsrRtrPriDeleteCreate/delete indicator for Router priority table entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.3.1.1 |
wfAsrRtrPriLowValLow value of router priority range.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.3.1.2 |
wfAsrRtrPriHiValHigh value of router priority range.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.3.1.3 |
wfAsrRtrPriCvtValRouter priority Queue value.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.3.1.4 |
wfAsrMultiHopTableA table used by ASR to identify those PVCs that can be used
as a multi hop path or overlay network. SEQUENCE OF WfAsrMultiHopEntry .1.3.6.1.4.1.18.3.5.9.11.4 |
wfAsrMultiHopEntryMulti Hop PVC identification. WfAsrMultiHopEntry .1.3.6.1.4.1.18.3.5.9.11.4.1 |
wfAsrMultiHopDeleteCreate/delete indicator for multi hop table entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.4.1.1 |
wfAsrMhCircuitNumberInstance identifier. The circuit number of this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.4.1.2 |
wfAsrMhVcid1VCID 1 value. The Dlci number for Frame Relay, the VPI for ATM.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.4.1.3 |
wfAsrMhVcid2VCID 2 value. The VCI for ATM, NULL for Frame Relay.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.4.1.4 |
wfAsrDirectExceptTableThe directional exception asymmetric route avoidance table.
This tables index is made up of the protocol and service field. SEQUENCE OF WfAsrDirectExceptEntry .1.3.6.1.4.1.18.3.5.9.11.5 |
wfAsrDirectExceptEntryThe ASR directional exception table. WfAsrDirectExceptEntry .1.3.6.1.4.1.18.3.5.9.11.5.1 |
wfAsrServiceProtocolService protocol indicates what protocol this entry is
for. Coices are UDP or TCP.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.5.1.1 |
wfAsrServicePortApplication port number of service connecting to.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.5.1.2 |
wfAsrSrcPortLowLow port number of application serving as source used
at host site.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.5.1.3 |
wfAsrSrcPortHighHigh port number of application serving as source used
at host site.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.5.1.4 |
wfAsrDestPortLowLow port number of application serving as destination used
at client site.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.5.1.5 |
wfAsrDestPortHighHigh port number of application serving as destination used
at client site.rw INTEGER .1.3.6.1.4.1.18.3.5.9.11.5.1.6 |
wfAsrCircuitTableA table which contains configuration information for
each circuit defined to ASR but not specific to a
specific circuit. The table is indexed by
circuit number. SEQUENCE OF WfAsrCircuitEntry .1.3.6.1.4.1.18.3.5.9.11.6 |
wfAsrCircuitEntryAn ASR circuit description WfAsrCircuitEntry .1.3.6.1.4.1.18.3.5.9.11.6.1 |
wfAsrCircuitCreateCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete an ASR circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.6.1.1 |
wfAsrCircuitEnableEnable/Disable parameter. Default is enabled.
Users perform a set operation on this
object in order to enable/disable an ASR circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.6.1.2 |
wfAsrCircuitStateInvalid indicates an error in processing the cfg recordro Enumeration .1.3.6.1.4.1.18.3.5.9.11.6.1.3 |
wfAsrCircuitNumberInstance identifier. The circuit number of this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.6.1.4 |
wfAsrCircuitCallCtrlDefine call policy for this SVC circuit. 1) allow inbound calls only 2) allow outbound calls only 3)allow inbound and outbound calls 4) allow neither inbound or outbound calls.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.6.1.5 |
wfAsrCircuitInReceivesThe total number of input datagrams received at the circuit,
including those received in error.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.6 |
wfAsrCircuitInDiscardsThe total number of input datagrams discarded due to failed
setup attempts, unreachable destinations, etc.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.7 |
wfAsrCircuitSetupRequestsThe total number of SVC setup requests attempted on the circuit
,
including those which failed.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.8 |
wfAsrCircuitSetupSuccThe total number of SVC setup requests attempted on the circuit
which resulted in an SVC being established.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.9 |
wfAsrCircuitSetupFailThe total number of SVC setup requests attempted on the circuit
which resulted in an SVC not being established.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.10 |
wfAsrCircuitSVCsEstablishedThe total number of SVCs currently established on the circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.11 |
wfAsrNegativeNHRCount of negative NHR responses received from NHRP.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.12 |
wfAsrSvcOutboundReqFailCount of outbound requests for SVCs that failed.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.13 |
wfAsrSvcInboundFilterFailCount of inbound packets failing inbound packet filtering.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.14 |
wfAsrSvcInboundCallValFailCount of inbound SVC call validation failures.ro Counter .1.3.6.1.4.1.18.3.5.9.11.6.1.15 |
wfAsrFiltTableA table containing setup information related to an SVC.
The table is indexed by slot,dest ip addr and mask, source
ip addr and mask, source and dest port ranges and protocol. SEQUENCE OF WfAsrFiltEntry .1.3.6.1.4.1.18.3.5.9.11.7 |
wfAsrFiltEntryASR SVC setup information. WfAsrFiltEntry .1.3.6.1.4.1.18.3.5.9.11.7.1 |
wfAsrFilterCreateCreate/delete this filter entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.7.1.1 |
wfAsrFilterSlotThe router slot on which this filter exists.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.2 |
wfAsrDestIpAddrFilter destination IP address reference value.ro IpAddress .1.3.6.1.4.1.18.3.5.9.11.7.1.3 |
wfAsrDestIpMaskFilter destination IP address mask.ro IpAddress .1.3.6.1.4.1.18.3.5.9.11.7.1.4 |
wfAsrSourceIpAddrFilter source IP address reference value.ro IpAddress .1.3.6.1.4.1.18.3.5.9.11.7.1.5 |
wfAsrSourceIpMaskFilter source IP address mask.ro IpAddress .1.3.6.1.4.1.18.3.5.9.11.7.1.6 |
wfAsrDestPortRangeLowThe low value for the range of TCP/UDP destination ports.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.7 |
wfAsrDestPortRangeHighThe high value for the range of TCP/UDP destination ports.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.8 |
wfAsrSourcePortRangeLowThe low value for the range of TCP/UDP source ports.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.9 |
wfAsrSourcePortRangeHighThe high value for the range of TCP/UDP source ports.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.10 |
wfAsrIPProtocolIP protocol for this filter (TCP or UDP).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.11 |
wfAsrFilterTtlFor SVC filters, this is the SVC idle time (seconds).
For all other filter types, this is the filter expiration
time (seconds).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.12 |
wfAsrFilterTypeType of filter (SVC, NOSVC, in-progress, dest unreachable).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.11.7.1.13 |
wfAsrSvcCircuitNumberCircuit number on which the SVC is created.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.14 |
wfAsrSvcVcid1For Frame Relay SVCs, this is the DLCI value.
For ATM SVCs, this is the VPI value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.15 |
wfAsrSvcVcid2For ATM SVCs, this is the VCI value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.16 |
wfAsrSvcCalledAddrSVC Called Party Addressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.11.7.1.17 |
wfAsrSvcSetupTimeTime stamp of when the SVC was created.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.18 |
wfAsrSvcTypeType of SVC created (Frame Relay or ATM).rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.7.1.19 |
wfAsrSvcMTUThe maximum transmission unit for this SVC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.20 |
wfAsrSvcRouterPriOutThe router priority queue to be used for the packets
sent on this SVC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.21 |
wfAsrFrSvcCIRInFrame Relay SVC commited information rate - inbound (bps).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.22 |
wfAsrFrSvcCIROutFrame Relay SVC commited information rate - outbound (bps).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.23 |
wfAsrFrSvcBCInFrame Relay commited burst rate for SVC - inbound (bps).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.24 |
wfAsrFrSvcBCOutFrame Relay commited burst rate for the SVC - outbound (bps).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.25 |
wfAsrFrSvcBEInFrame Relay excess burst rate for the SVC - inbound (bps).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.26 |
wfAsrFrSvcBEOutFrame Relay excess burst rate for the SVC - outbound (bps).ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.27 |
wfAsrFrSvcX213PriFrame Relay SVC X.213 data priority value passed
to the switch during call setup.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.28 |
wfAsrAtmSvcPCRInATM SVC Peak Cell Rate - inbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.29 |
wfAsrAtmSvcPCROutATM SVC Peak Cell Rate - outbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.30 |
wfAsrAtmSvcSCRInATM SVC Sustainable Cell Rate - inbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.31 |
wfAsrAtmSvcSCROutATM SVC Sustainable Cell Rate - outbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.32 |
wfAsrAtmSvcMBSInATM SVC Maximum Burst Size - inbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.33 |
wfAsrAtmSvcMBSOutATM SVC Maximum Burst Size - outbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.34 |
wfAsrAtmSvcQOSClassInATM SVC Quality of Service - inbound. Class 0 through 4.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.35 |
wfAsrAtmSvcQOSClassOutATM SVC Quality of Service - outbound. Class 0 through 4.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.36 |
wfAsrAtmSvcCDVTInATM SVC Cell Delay Variation Tolerance - inbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.37 |
wfAsrAtmSvcCDVTOutATM SVC Cell Delay Variation Tolerance - outbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.38 |
wfAsrAtmSvcCLRInATM SVC Cell Loss Ratio - inbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.39 |
wfAsrAtmSvcCLROutATM SVC Cell Loss Ratio - outbound.ro INTEGER .1.3.6.1.4.1.18.3.5.9.11.7.1.40 |
wfAsrTest OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.11.8 |
wfAsrTestCreateCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete ASR Test Object.rw Enumeration .1.3.6.1.4.1.18.3.5.9.11.8.1 |
wfAsrTestChangeValValue to set the protocol field in the ASR
Fwd Table. This will take the SVC entry
matching the Dlci and Cct number and change
the filter. This is used only for Inbound Pkt
Filtering testsrw INTEGER .1.3.6.1.4.1.18.3.5.9.11.8.2 |
wfAsrTestDlciDlci of SVC Filter entry to changerw INTEGER .1.3.6.1.4.1.18.3.5.9.11.8.3 |
wfAsrTestCctCircuit number of SVC Filter to changerw INTEGER .1.3.6.1.4.1.18.3.5.9.11.8.4 |