WS-SW-MSTP-MIB
AI MIB Summary
The WS-SW-MSTP-MIB module provides SNMP access to monitor and manage Multiple Spanning Tree Protocol (MSTP) instances, port states, and topology change notifications on Huawei network switches. It exposes specific metrics including MSTP region configuration, instance-to-VLAN mappings, and port role transitions to facilitate Layer 2 loop prevention and redundancy verification.
Symbol MIB for MSTP
Main OID:
wsSwMstp.1.3.6.1.4.1.388.14.2.14
70
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
wsSwMstpSymbol MIB for MSTP MODULE-IDENTITY .1.3.6.1.4.1.388.14.2.14 |
wsSwMstpGen OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.14.10 |
wsSwMstpGenMaxHopsSpecifies the maximum allowed hops for a BPDU in an MST
region. This parameter is used by all the instances
of the MST.rw INTEGER .1.3.6.1.4.1.388.14.2.14.10.14 |
wsSwMstpVersionsSupportedAn indication of wheter the Bridge supports
Spanning Tree Protocol.
The bit nonStp(0) indicates, the Bridge doesn't
support any Spanning Tree Protocol.
The bit 'dot1d1998(1)' indicates the Spanning Tree Protocol
specified in EEE 802.1D-1998, 'dot1w(2)' indicates the Rapid
Spanning Tree Protocol specified in IEEE Std 802.1w,
'dot1d2004' indicates IEEE Std 802.1D-2004 and
'dot1s(4) means MSTP IEEE Std 802.1s.
When the bridge supprts a non-listed version, the bit unknown(15) should
be set.ro Bits .1.3.6.1.4.1.388.14.2.14.10.19 |
wsSwMstpGenProtocolVersionThis object is relevant if the Bridges that can supply a number of versions of STP.
For GET operation this object reflects the mode in which the Bridge works
currently. If the Bridge works currently in the version, not listed here, the
value unknown(4) must be returned.
For SET operation the value unknown(15) must be rejected. Another value may be
rejected too if the Bridge does not support correspond mode (see wsSwMstpVersionsSupported).
The value forceNonStp(0) indicates, the Spanning Tree Protocol
is disabled on the Bridge (or the Spanning Tree Protocol
Emulation operates). Other possible values are described
in IEEE Std 802.1s clause 12.8.1.3.e)rw Enumeration .1.3.6.1.4.1.388.14.2.14.10.20 |
wsSwMstpGenCfgIdFmtSelConfiguration Identificator Format Selector.ro Integer32 .1.3.6.1.4.1.388.14.2.14.10.30 |
wsSwMstpGenCfgIdNameThe configuration name that identifies the MST
region and is used as one of the inputs in the
computation of the MST Configuration Identifier.rw DisplayString .1.3.6.1.4.1.388.14.2.14.10.31 |
wsSwMstpGenCfgIdRevLevelThis object identifies the MST revision that
identifies the MST region and is used as one
of the inputs in the computation of the MST
configuration Identifier.rw INTEGER .1.3.6.1.4.1.388.14.2.14.10.32 |
wsSwMstpGenCfgIdDigestThe computed Configuration Digest.ro OCTET STRING .1.3.6.1.4.1.388.14.2.14.10.33 |
wsSwMstpGenRegionalRootRegional root of the CIST.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.388.14.2.14.10.36 |
wsSwMstpGenExternalRootCostExternal root cost of CIST.ro Integer32 .1.3.6.1.4.1.388.14.2.14.10.37 |
wsSwMstpErrdisableTimeoutThe BPDU guard feature shuts down the port on receiving
a BPDU on a BPDU-guard enabled port. This object associates
a timer with the feature such that the port gets enabled
back without manual intervention after a set interval.
This interval can be configured by the user using object
wsSwMstpErrdisableTimeoutIntervalrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.10.50 |
wsSwMstpErrdisableTimeoutIntervalSpecifies the time interval in seconds after
which a port for which wsSwMstpErrdisableTimeout
is true, is brought back up.rw Integer32 .1.3.6.1.4.1.388.14.2.14.10.51 |
wsSwMstpPortfastBpduFilterEnabling the BPDU Filter feature ensures that
PortFastenabled ports (edge ports for which
dot1dStpPortOperEdgePort is true) do not transmit or
receive any BPDUsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.10.52 |
wsSwMstpPortFastBpduGuardWhen the BPDU Guard feature is set for a bridge, all
portfast-enabled ports (edge ports for which
dot1dStpPortOperEdgePort is true) of the bridge that have
bpdu-guard set to default shut down the port on receiving
a BPDU. In this case, the BPDU is not processed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.10.53 |
wsSwMstpAdminCiscoInteroperabilityEnabled interoperability with Cisco's
version of MSTPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.10.54 |
wsSwMstpOperCiscoInteroperabilityThe operational value of the Cisco
interoperability parameter. True if
Cisco interoperability is administratively
enabled and a Cisco BPDU is detected.ro Integer32 .1.3.6.1.4.1.388.14.2.14.10.55 |
wsSwMstpGlobalStateThe global state of MSTP in the switch.
The possible states are enabled, disabled
and disabledWithBridgeForwardrw Enumeration .1.3.6.1.4.1.388.14.2.14.10.56 |
wsSwMstMapTableThis table contains one entry for each instance of MSTP. SEQUENCE OF WsSwMstMapEntry .1.3.6.1.4.1.388.14.2.14.11 |
wsSwMstMapEntryA conceptual row containing the status of the MSTP instance. WsSwMstMapEntry .1.3.6.1.4.1.388.14.2.14.11.1 |
wsSwMstMapIndexUniquely identifies an instance. The entry of this table with index 0
presents always, represents CIST. However, a SET operation
at the CIST index returns an error.ro MstiOrCistInstanceIndex .1.3.6.1.4.1.388.14.2.14.11.1.1 |
wsSwMstMapVlans1kA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to the lowest VlanIndex value in that octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.388.14.2.14.11.1.6 |
wsSwMstMapVlans2kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.388.14.2.14.11.1.7 |
wsSwMstMapVlans3kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.388.14.2.14.11.1.8 |
wsSwMstMapVlans4kA string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087 etc. The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.
For each VLAN that is mapped to this MSTP instance,
the bit corresponding to that VLAN is set to '1'.
Empty (zero) most significant octes are not mandatory.rw OCTET STRING .1.3.6.1.4.1.388.14.2.14.11.1.9 |
wsSwMstVlanTableThis table contains one entry for each VlanId. SEQUENCE OF WsSwMstVlanEntry .1.3.6.1.4.1.388.14.2.14.12 |
wsSwMstVlanEntryInformation regarding the instance to which each Vlan is mapped. WsSwMstVlanEntry .1.3.6.1.4.1.388.14.2.14.12.1 |
wsSwMstVlanIndexThe VlanId for which this entry contains the instance mapped.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.388.14.2.14.12.1.1 |
wsSwMstVlanMstIndexAn integer with values ranging from 0 to 16 that identify
the CIST/MSTI instance to which this VLAN is mappedro MstiOrCistInstanceIndex .1.3.6.1.4.1.388.14.2.14.12.1.2 |
wsSwMstpPortTableA table that contains generic information about
every port that is associated with this bridge. SEQUENCE OF WsSwMstpPortEntry .1.3.6.1.4.1.388.14.2.14.13 |
wsSwMstpPortEntryA list of information for each port of the
bridge. WsSwMstpPortEntry .1.3.6.1.4.1.388.14.2.14.13.1 |
wsSwMstpPortIndexA unique value, greater than zero, for each Port.
The value for each interface sub-layer
must remain constant at least from one re-initialization
of the entity's network management system to the next re-
initialization.ro PortIndex .1.3.6.1.4.1.388.14.2.14.13.1.1 |
wsSwMstpPortAdminMACEnableThe value of the MAC Enabled parameter (6.4.2 of IEEE Std 802.1D, 1998 Edition).
May be present if the implementation supports the MAC Enabled parameter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.13.1.2 |
wsSwMstpPortOperMACEnableThe operational value of the MAC Enabled parameter (6.4.2 of IEEE Std 802.1D, 1998 Edition).
May be present if the implementation supports the MAC Enabled parameter.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.13.1.3 |
wsSwMstpPortAutoEdgeOptional and provided only by MSTP Bridges that support the automatic
identification of edge ports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.13.1.9 |
wsSwMstpPortDesignatedBridgeThe designated bridge for this portro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.388.14.2.14.13.1.14 |
wsSwMstpPortGuardRootIf set to true, makes sure that the port on which it is
enabled is a designated port. If the Root Guard enabled
port receives a superior BPDU, it goes to a discarding state.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.13.1.50 |
wsSwMstpAdminPortPortfastBpduFilterEnabling the Port BPDU Filter feature ensures that
PortFastenabled ports (edge ports for which
dot1dStpPortOperEdgePort is true) do not transmit or
receive any BPDUs.
When set to enabled or disabled, this configuration takes
precedence over wsSwMstpPortfastBpduFilter. However, when
setto default, the bridge level BPDU-filter configuration
takes effect for the port.rw Enumeration .1.3.6.1.4.1.388.14.2.14.13.1.51 |
wsSwMstpOperPortPortfastBpduFilterThe operational value for Portfast BPDU
Filter for this portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.13.1.52 |
wsSwMstpAdminPortPortfastBpduGuardWhen the BPDU Guard feature is set for a bridge, all
portfast-enabled ports (edge ports for which
dot1dStpPortOperEdgePort is true) of the bridge that have
bpdu-guard set to default shut down the port on receiving
a BPDU. In this case, the BPDU is not processed.
When set to enabled or disabled, this configuration takes
precedence over wsSwMstpPortfastBpduGuard. However, when
setto default, the bridge level BPDU-guard configuration
takes effect for the port.rw Enumeration .1.3.6.1.4.1.388.14.2.14.13.1.53 |
wsSwMstpOperPortPortfastBpduGuardThe operational value for Portfast BPDU guard
for this portro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.13.1.54 |
wsSwMstpPortVersionThe spanning tree version used by BPDU's sent
and received on this portrw Enumeration .1.3.6.1.4.1.388.14.2.14.13.1.55 |
wsSwMstpXstTableA table that contains information about
every MST instance on this bridge. SEQUENCE OF WsSwMstpXstEntry .1.3.6.1.4.1.388.14.2.14.14 |
wsSwMstpXstEntryA list of information for each instance on this bridge WsSwMstpXstEntry .1.3.6.1.4.1.388.14.2.14.14.1 |
wsSwMstpXstIdThe instance id.ro MstiOrCistInstanceIndex .1.3.6.1.4.1.388.14.2.14.14.1.1 |
wsSwMstpXstBridgePriorityBridge priority, in steps of 4096.rw INTEGER .1.3.6.1.4.1.388.14.2.14.14.1.2 |
wsSwMstpXstBridgeIdThe bridge ID for this instancero BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.388.14.2.14.14.1.3 |
wsSwMstpXstDesignatedRootThe designated root for this instancero BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.388.14.2.14.14.1.4 |
wsSwMstpXstInternalRootCostThe internal root cost for this instancero Integer32 .1.3.6.1.4.1.388.14.2.14.14.1.6 |
wsSwMstpXstRootPortThe root port for this instance, if on this bridge.ro PortIndexOrZero .1.3.6.1.4.1.388.14.2.14.14.1.7 |
wsSwMstpXstMasterPortThe master port for this instance, if on this bridge.
Non zero value may not be in CIST.ro PortIndexOrZero .1.3.6.1.4.1.388.14.2.14.14.1.8 |
wsSwMstpXstRowStatusrow status: only createAndGo, destroy, active are supported.rw AbbrevRowStatus .1.3.6.1.4.1.388.14.2.14.14.1.9 |
wsSwMstpXstPortTableA table to manage ports inside instances - both CIST
and MSTIs. It contains objects, describing
ports and is common for these both types of instances. SEQUENCE OF WsSwMstpXstPortEntry .1.3.6.1.4.1.388.14.2.14.15 |
wsSwMstpXstPortEntryA list of information for each port in each instance for this bridge. WsSwMstpXstPortEntry .1.3.6.1.4.1.388.14.2.14.15.1 |
wsSwMstpXstPortXstIdThe instance id. 0 means CIST.ro MstiOrCistInstanceIndex .1.3.6.1.4.1.388.14.2.14.15.1.1 |
wsSwMstpXstPortIndexThe value of wsSwMstpPortIndex of the Port
in wsSwMstpPortTable.ro PortIndex .1.3.6.1.4.1.388.14.2.14.15.1.2 |
wsSwMstpXstPortStateThe state the port is in.ro Enumeration .1.3.6.1.4.1.388.14.2.14.15.1.3 |
wsSwMstpXstPortRoleThe role of this portro Enumeration .1.3.6.1.4.1.388.14.2.14.15.1.4 |
wsSwMstpXstPortInternalRootCostThe internal root path cost for this port in this instancero Integer32 .1.3.6.1.4.1.388.14.2.14.15.1.9 |
wsSwMstpXstPortDesignatedBridgeThe designated bridge ID for this port in this instancero BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.388.14.2.14.15.1.10 |
wsSwMstpXstPortDesignatedPortThe designated port idro PortId .1.3.6.1.4.1.388.14.2.14.15.1.14 |
wsSwMstpXstPortPriorityPort priority, in steps of 16.rw INTEGER .1.3.6.1.4.1.388.14.2.14.15.1.15 |
wsSwMstpXstPortAdminInternalPathCostThe value of the internal path cost. The value 0 means,
that the cost will be selected automatically.rw INTEGER .1.3.6.1.4.1.388.14.2.14.15.1.16 |
wsSwMstpXstPortOperInternalPathCostThe operational value of the internal path costro Integer32 .1.3.6.1.4.1.388.14.2.14.15.1.17 |
wsSwMstpOptionSupport OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.14.16 |
wsSwMstpOptionPortAdminMACEnableIf this is true, swWsMstpPortAdminMACEnable can be setro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.16.1 |
wsSwMstpOptionPortAutoEdgeIf this is true wsSwMstpPortAutoEdge can be setro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.2.14.16.2 |
wsSwMstpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.14.100 |
wsSwMstpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.14.100.1 |
wsSwMstpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.2.14.100.2 |