SYMBOL-AP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SYMBOL-AP-MIB.
Main OID:
moduleid.1.3.6.1.4.1.388.11.3.1
1182
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
1182 total| Object Name |
|---|
symbol OBJECT IDENTIFIER .1.3.6.1.4.1.388 |
wsd OBJECT IDENTIFIER .1.3.6.1.4.1.388.11 |
sysoids OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.1 |
ap5131AP5131 with 1 WAN port, 1 LAN ports. OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.1.2 |
ap5181AP5131 with 1 WAN port, 1 LAN ports, 533Mhz processor speed. OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.1.3 |
ap7131AP7131 OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.1.4 |
ap7181AP7181. OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.1.5 |
abgAP OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3 |
moduleid MODULE-IDENTITY .1.3.6.1.4.1.388.11.3.1 |
dot1x OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.3 |
dot1xPaeAuthenticator OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.3.1 |
dot1xAuthConfigTableA table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself. SEQUENCE OF Dot1xAuthConfigEntry .1.3.6.1.4.1.388.11.3.3.1.1 |
dot1xAuthConfigEntryThe configuration information for an Authenticator PAE. Dot1xAuthConfigEntry .1.3.6.1.4.1.388.11.3.3.1.1.1 |
dot1xPaePortNumberThe Port number associated with this Port.ro Integer32 .1.3.6.1.4.1.388.11.3.3.1.1.1.1 |
dot1xPaeStateThe current value of the Authenticator PAE state machine.ro Enumeration .1.3.6.1.4.1.388.11.3.3.1.1.1.2 |
dot1xAuthBackendAuthStateThe current state of the Backend Authentication state machine.ro Enumeration .1.3.6.1.4.1.388.11.3.3.1.1.1.3 |
dot1xAuthAdminControlledDirectionsThe current value of the administrative controlled directions parameter for the Port.ro Integer32 .1.3.6.1.4.1.388.11.3.3.1.1.1.4 |
dot1xAuthOperControlledDirectionsThe current value of the operational controlled directions parameter for the Port.ro Integer32 .1.3.6.1.4.1.388.11.3.3.1.1.1.5 |
dot1xAuthAuthControlledPortStatusThe current value of the controlled Port status parameter for the Port.ro Integer32 .1.3.6.1.4.1.388.11.3.3.1.1.1.6 |
dot1xAuthAuthControlledPortControlThe current value of the controlled Port control parameter for the Port.ro Integer32 .1.3.6.1.4.1.388.11.3.3.1.1.1.7 |
dot1xAuthQuietPeriodThe value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.ro Unsigned32 .1.3.6.1.4.1.388.11.3.3.1.1.1.8 |
dot1xAuthTxPeriodThe value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.ro Unsigned32 .1.3.6.1.4.1.388.11.3.3.1.1.1.9 |
dot1xAuthSuppTimeoutThe value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.ro Unsigned32 .1.3.6.1.4.1.388.11.3.3.1.1.1.10 |
dot1xAuthServerTimeoutThe value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.ro Unsigned32 .1.3.6.1.4.1.388.11.3.3.1.1.1.11 |
dot1xAuthMaxReqThe value of the maxReq constant currently in use by the Backend Authentication state machine.ro Unsigned32 .1.3.6.1.4.1.388.11.3.3.1.1.1.12 |
dot1xAuthReAuthPeriodThe value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.ro Unsigned32 .1.3.6.1.4.1.388.11.3.3.1.1.1.13 |
dot1xAuthReAuthEnabledThe enable/disable control used by the Reauthentication Timer state machinero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.3.1.1.1.14 |
dot1xAuthKeyTxEnabledThe value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.3.1.1.1.15 |
dot1xAuthStatsTableA table that contains the statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. SEQUENCE OF Dot1xAuthStatsEntry .1.3.6.1.4.1.388.11.3.3.1.2 |
dot1xAuthStatsEntryThe statistics information for an Authenticator PAE. Dot1xAuthStatsEntry .1.3.6.1.4.1.388.11.3.3.1.2.1 |
dot1xAuthEapolFramesRxThe number of valid EAPOL frames of any type that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.1 |
dot1xAuthEapolFramesTxThe number of EAPOL frames of any type that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.2 |
dot1xAuthEapolStartFramesRxThe number of EAPOL Start frames that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.3 |
dot1xAuthEapolLogoffFramesRxThe number of EAPOL Logoff frames that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.4 |
dot1xAuthEapolRespIdFramesRxThe number of EAP Resp/Id frames that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.5 |
dot1xAuthEapolRespFramesRxThe number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.6 |
dot1xAuthEapolReqIdFramesTxThe number of EAP Req/Id frames that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.7 |
dot1xAuthEapolReqFramesTxThe number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.8 |
dot1xAuthInvalidEapolFramesRxThe number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.9 |
dot1xAuthEapLengthErrorFramesRxThe number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.2.1.10 |
dot1xAuthLastEapolFrameVersionThe protocol version number carried in the most recently received EAPOL frame.ro OCTET STRING .1.3.6.1.4.1.388.11.3.3.1.2.1.11 |
dot1xAuthLastEapolFrameSourceThe source MAC address carried in the most recently received EAPOL frame.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.3.1.2.1.12 |
dot1xAuthDiagTableA table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. SEQUENCE OF Dot1xAuthDiagEntry .1.3.6.1.4.1.388.11.3.3.1.3 |
dot1xAuthDiagEntryThe diagnostics information for an Authenticator PAE. Dot1xAuthDiagEntry .1.3.6.1.4.1.388.11.3.3.1.3.1 |
dot1xAuthEntersConnectingCounts the number of times that the state machine transitions to the CONNECTING state from any other state.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.1 |
dot1xAuthEapLogoffsWhileConnectingCounts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.2 |
dot1xAuthEntersAuthenticatingCounts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.3 |
dot1xAuthAuthSuccessWhileAuthenticatingCounts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.4 |
dot1xAuthAuthTimeoutsWhileAuthenticatingCounts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.5 |
dot1xAuthAuthFailWhileAuthenticatingCounts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.6 |
dot1xAuthAuthReauthsWhileAuthenticatingCounts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.7 |
dot1xAuthAuthEapStartsWhileAuthenticatingCounts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.8 |
dot1xAuthAuthEapLogoffWhileAuthenticatingCounts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.9 |
dot1xAuthAuthReauthsWhileAuthenticatedCounts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.10 |
dot1xAuthAuthEapStartsWhileAuthenticatedCounts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.11 |
dot1xAuthAuthEapLogoffWhileAuthenticatedCounts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.12 |
dot1xAuthBackendResponsesCounts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.13 |
dot1xAuthBackendAccessChallengesCounts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.14 |
dot1xAuthBackendOtherRequestsToSupplicantCounts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.15 |
dot1xAuthBackendNonNakResponsesFromSupplicantCounts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.16 |
dot1xAuthBackendAuthSuccessesCounts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.17 |
dot1xAuthBackendAuthFailsCounts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.3.1.18 |
dot1xAuthSessionStatsTableA table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself. SEQUENCE OF Dot1xAuthSessionStatsEntry .1.3.6.1.4.1.388.11.3.3.1.4 |
dot1xAuthSessionStatsEntryThe session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active. Dot1xAuthSessionStatsEntry .1.3.6.1.4.1.388.11.3.3.1.4.1 |
dot1xAuthSessionOctetsRxThe number of octets received in user data frames on this Port during the session.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.4.1.1 |
dot1xAuthSessionOctetsTxThe number of octets transmitted in user data frames on this Port during the session.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.4.1.2 |
dot1xAuthSessionFramesRxThe number of user data frames received on this Port during the session.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.4.1.3 |
dot1xAuthSessionFramesTxThe number of user data frames transmitted on this Port during the session.ro Counter32 .1.3.6.1.4.1.388.11.3.3.1.4.1.4 |
dot1xAuthSessionIdA unique identifier for the session, in the form of a printable ASCII string of at least three characters.ro OCTET STRING .1.3.6.1.4.1.388.11.3.3.1.4.1.5 |
dot1xAuthSessionAuthenticMethodThe authentication method used to establish the session.ro Enumeration .1.3.6.1.4.1.388.11.3.3.1.4.1.6 |
dot1xAuthSessionTimeThe duration of the session in seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.11.3.3.1.4.1.7 |
dot1xAuthSessionTerminateCauseThe reason for the session termination.ro Enumeration .1.3.6.1.4.1.388.11.3.3.1.4.1.8 |
dot1xAuthSessionUserNameThe User-Name representing the identity of the Supplicant PAE.ro OCTET STRING .1.3.6.1.4.1.388.11.3.3.1.4.1.9 |
apRf OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4 |
apRadio OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.1 |
apRadioSettingsTableUse apRadioSettingsTable to view and set the properties of the radios. SEQUENCE OF ApRadioSettingsEntry .1.3.6.1.4.1.388.11.3.4.1.1 |
apRadioSettingsEntry ApRadioSettingsEntry .1.3.6.1.4.1.388.11.3.4.1.1.1 |
apRadioSettingsIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.1 |
apRadioSettingsEnableRow enable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.2 |
apRadioSettingsBandIn a system that contains only 1 radio, Radio 1 can be configured for 802.11b/g or 802.11a. In a system that contains 2 radios, Radio 1 will be configured for 802.11b/g and Radio 2 will be configured for 802.11a regardless of the user setting. One will get a set-fail if attempts to make a change. Note that 'aRadio' means an 802.11a standard radio that uses the 5.0 GHz band, and, 'bgRadio' means an 802.11b and 802.11g standards radio that use the 2.4 GHz band. An 802.11n radio can use both 2.4 GHz and/or 5.0 GHz bands, so, both these values are applicable for an 802.11n radio.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.1.1.3 |
apRadioSettingsPointersToWlansThis scalar points to multiple WLANs that use this radio.ro MultiPointer63 .1.3.6.1.4.1.388.11.3.4.1.1.1.4 |
apRadioSettingsNameName of Radio. Note that 'radio802dt11a' means an 802.11a standard radio that uses the 5GHz band, and, 'radio802dt11bg' means an 802.11b and 802.11g standards radio that use the 2.4 GHz band. An 802.11n radio can use both 2.4 GHz and/or 5.0 GHz bands, so, both these values are applicable for an 802.11n radio.ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.1.1.5 |
apRadioSettingsMacAddressMAC address of the radio.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.6 |
apRadioSettingsAntennaThe antenna diversity setting for the radio. Note that this setting does not apply for an 802.11n radio.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.1.1.7 |
apRadioSettingsShortPreambleEnable support for Short Preamble when MUs associate with the Access Point. Enabling Short Preamble may cause incompatibility with some older clients.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.8 |
apRadioSettingsRtsThreshThe Request To Send(RTS) threshold(in bytes) for use by the radio for the WLAN.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.9 |
apRadioSettingsBeaconIntSpecify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (apRadioSettingDtimPrd) value, for example, 100 : 10.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.10 |
apRadioSettingsDtimPrdSpecify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that this object's status is current for 802.11n radios, whereas it is obsolete for a/b/g radios.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.11 |
apRadioSettingsBasicRatesList of basic rates for the radio. Note that this setting does not apply for an 802.11n radio.rw Bits .1.3.6.1.4.1.388.11.3.4.1.1.1.12 |
apRadioSettingsSupportedRatesList of supported rates for the radio.rw Bits .1.3.6.1.4.1.388.11.3.4.1.1.1.13 |
apRadioSettingsBGModeRadio mode. Note that this setting does not apply for an 802.11n radio. Please use the object apRadioNSettingsMode under apRadioNSettingsTable for 802.11n radios.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.1.1.14 |
apRadioSettingsBackgroundModeThis QOS parameter is used by the AP for the Background access category.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.15 |
apRadioSettingsBackgroundCwMinThis QOS parameter is used by the AP for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.16 |
apRadioSettingsBackgroundCwMaxThis QOS parameter is used by the AP for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.17 |
apRadioSettingsBackgroundAifsnThis QOS parameter is used by the AP for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.18 |
apRadioSettingsBackgroundTxopsTimeThis QOS parameter is used by the AP for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.19 |
apRadioSettingsBackgroundTxopsTimeInMSThis QOS parameter is used by the AP for the Background access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.20 |
apRadioSettingsBestEffortModeThis QOS parameter is used by the AP for the Best Effort access category.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.21 |
apRadioSettingsBestEffortCwMinThis QOS parameter is used by the AP for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.22 |
apRadioSettingsBestEffortCwMaxThis QOS parameter is used by the AP for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.23 |
apRadioSettingsBestEffortAifsnThis QOS parameter is used by the AP for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.24 |
apRadioSettingsBestEffortTxopsTimeThis QOS parameter is used by the AP for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.25 |
apRadioSettingsBestEffortTxopsTimeInMSThis QOS parameter is used by the AP for the Best Effort access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.26 |
apRadioSettingsVideoModeThis QOS parameter is used by the AP for the Video access category.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.27 |
apRadioSettingsVideoCwMinThis QOS parameter is used by the AP for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.28 |
apRadioSettingsVideoCwMaxThis QOS parameter is used by the AP for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.29 |
apRadioSettingsVideoAifsnThis QOS parameter is used by the AP for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.30 |
apRadioSettingsVideoTxopsTimeThis QOS parameter is used by the AP for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.31 |
apRadioSettingsVideoTxopsTimeInMSThis QOS parameter is used by the AP for the Video access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.32 |
apRadioSettingsVoiceModeThis QOS parameter is used by the AP for the Voice access category.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.33 |
apRadioSettingsVoiceCwMinThis QOS parameter is used by the AP for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.34 |
apRadioSettingsVoiceCwMaxThis QOS parameter is used by the AP for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.35 |
apRadioSettingsVoiceAifsnThis QOS parameter is used by the AP for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.36 |
apRadioSettingsVoiceTxopsTimeThis QOS parameter is used by the AP for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.37 |
apRadioSettingsVoiceTxopsTimeInMSThis QOS parameter is used by the AP for the Voice access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.38 |
apRadioSettingsE2BMapMessageGlobal ESS to BSS mapping status message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.39 |
apRadioSettingsERPProtectionStatusWhether ERP Protection is ON or OFF.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.1.1.40 |
apRadioSettingsWMMQosParamPre-Programmed WMM QOS Parameters. manual - Modify parameters wifi11agn - WiFi 11a/11g/11n defaults wifi11b - WiFi 11b defaults default11agn - Symbol 11a/11g/11n defaults default11b - Symbol 11b defaults voice11agn - Symbol 11a/11g/11n voice params voice11b - Symbol 11b voice paramsrw Enumeration .1.3.6.1.4.1.388.11.3.4.1.1.1.41 |
apRadioSettingsQBSSChannelBeaconIntChannel Utilization Beacon Intervals for QBSS Load Element (802.11e)rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.1.1.42 |
apRadioSettingsQBSSLoadElementModeEnable/Disable QBSS Load Element.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.1.1.43 |
apRadioCfgTableUse apRadioCfgTable to view and set the radio properties of the Access Points. The process can be broken down into the following steps: 1. Set apRadioCfgReset to TRUE. 2. Set apRadioCfgDesPlacement 3. Get apRadioCfgPosChannel 4. Set apRadioCfgDesChannel 5. Get apRadioCfgPosPowerLevel 6. Set apRadioCfgDesPowerLevel 7. Get apRadioCfgPowerInMW 8. Set and pull progress of apRadioCfgSet 9. Validate the configuration has been set by getting apRadioCfgPlacement apRadioCfgChannel apRadioCfgPowerLevel SEQUENCE OF ApRadioCfgEntry .1.3.6.1.4.1.388.11.3.4.1.2 |
apRadioCfgEntry ApRadioCfgEntry .1.3.6.1.4.1.388.11.3.4.1.2.1 |
apRadioCfgChannelModeChannel Mode for the Radio. The user is allowed to enter the apRadioDesChannel value only if the Channel Mode is Set to userSelect. The values autoSelect40(4) and uniformSpreading40(5) are applicable only in case of 802.11n radios.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.2.1.1 |
apRadioCfgDesPlacementThe desired placement for radio.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.2.1.2 |
apRadioCfgPosChannelThe possible channels that can be set when placement = apRadioCfgDesPlacement.ro Bits .1.3.6.1.4.1.388.11.3.4.1.2.1.3 |
apRadioCfgDesChannelThe desired channel for radio. Please do not use this object for an access point that supports 802.11n radio. Use apRadioNCfgDesChannel instead.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.2.1.4 |
apRadioCfgPosPowerLevelThe max possible power level (dBm) that can be set when channel= apRadioCfgDesChannel. The range is 4 to 20 dBm.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.2.1.5 |
apRadioCfgDesPowerLevelThe desired power level (dBm) for radio. The following power levels are available 4dBm=3mW, 5dBm=3mW, 6dBm=4mW, 7dBm=5mW, 8dBm=6mW, 9dBm=8mW, 10dBm=10mW, 11dBm=13mW, 12dBm=16mW, 13dBm=20mW, 14dBm=25mW, 15dBm=32mW, 16dBm=40mW, 17dBm=50mW, 18dBm=63mW, 19dBm=79mW, 20dBm=100mW Note: Power level allowed depends on radio type, channel and country of operation.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.2.1.6 |
apRadioCfgDesPowerInMWapRadioCfgDesPowerLevel in mW.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.2.1.7 |
apRadioCfgSetValidate values in apRadioCfgDes_ fields. If it is a valid combination, configure the switch with this combination and set apRadioCfg_ to these values.rw DoActionShowProgress .1.3.6.1.4.1.388.11.3.4.1.2.1.8 |
apRadioCfgResetReset the following OIDs. apRadioCfgDesPlacement apRadioCfgDesChannel apRadioCfgDesPowerLevel apRadioCfgPosChannel apRadioCfgPosPowerLevel apRadioCfgPowerInMWrw DoActionShowProgress .1.3.6.1.4.1.388.11.3.4.1.2.1.9 |
apRadioCfgPlacementThe placement configuration for radio.ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.2.1.10 |
apRadioCfgChannelThe channel configuration for radio.ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.2.1.11 |
apRadioCfgPowerLevelThe power level (dBm) configuration for radio.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.2.1.12 |
apRadioCfgPowerInMWapRadioCfgPowerLevel in mW.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.2.1.13 |
apRadioCfgRfFunctionWLAN or WIPS sensor operation mode for the Radio.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.2.1.14 |
apRadioCfgExceptionChannelThe channels that will be excluded from scanning when channelMode is autoSelect.rw Bits .1.3.6.1.4.1.388.11.3.4.1.2.1.15 |
apRadioWlanBssTableTable of BSSIDs mapped to WLANs. SEQUENCE OF ApRadioWlanBssEntry .1.3.6.1.4.1.388.11.3.4.1.3 |
apRadioWlanBssEntry ApRadioWlanBssEntry .1.3.6.1.4.1.388.11.3.4.1.3.1 |
apRadioWlanBssidBSSID assigned to this particular WLAN.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.3.1.1 |
apRadioBssTableUse apRadioBssTable to view and set the properties of the Bss's. SEQUENCE OF ApRadioBssEntry .1.3.6.1.4.1.388.11.3.4.1.4 |
apRadioBssEntry ApRadioBssEntry .1.3.6.1.4.1.388.11.3.4.1.4.1 |
apRadioBssIndexro Integer32 .1.3.6.1.4.1.388.11.3.4.1.4.1.1 |
apRadioBssPrimaryWlanPrimary WLAN used by the AP to send beacons.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.4.1.2 |
apRadioBssDtimPrdSpecify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100. Note that BSS DTIM period is not supported for 802.11n radios.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.4.1.3 |
apRadioE2BMapStatusTableThe table describes the ESS to BSS mapping status. SEQUENCE OF ApRadioE2BMapStatusEntry .1.3.6.1.4.1.388.11.3.4.1.5 |
apRadioE2BMapStatusEntry ApRadioE2BMapStatusEntry .1.3.6.1.4.1.388.11.3.4.1.5.1 |
apRadioE2BMapStatusBcMcEncCipherBroadcast/Mulitcast Encryption cipher based on the ESS to BSS mapping.ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.5.1.1 |
apRadioE2BMapStatusESS to BSS map status.ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.5.1.2 |
apRadioE2BMapStatusMessageESS to BSS map status message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.5.1.3 |
apRadioMesh OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.1.6 |
apRadioMeshTableTable for MESH configuration for Radio. SEQUENCE OF ApRadioMeshEntry .1.3.6.1.4.1.388.11.3.4.1.6.1 |
apRadioMeshEntry ApRadioMeshEntry .1.3.6.1.4.1.388.11.3.4.1.6.1.1 |
apRadioMeshBaseBridgeModeMESH base bridge mode for radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.6.1.1.1 |
apRadioMeshMaxClientsMaximum number of MESH client bridges.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.6.1.1.2 |
apRadioMeshClientBridgeModeMESH client bridge mode for radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.6.1.1.3 |
apRadioMeshWlanPtrMESH client bridge WLAN. For the value 0 there is no WLAN assigned for Client Bridge connection.rw SinglePointer .1.3.6.1.4.1.388.11.3.4.1.6.1.1.4 |
apRadioMeshConnAutoSelectEnable/Disable the MESH Auto Connection Select Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.6.1.1.5 |
apRadioMeshTimeoutMesh Timeout Status.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.6.1.1.6 |
apRadioMeshTimeoutValueIf Mesh is not connected after Timeout period (in seconds), stop the AP from sending beacons.rw INTEGER .1.3.6.1.4.1.388.11.3.4.1.6.1.1.7 |
apRadioMeshAvailableConnTableTable of Available Base Bridge MESH connections. SEQUENCE OF ApRadioMeshAvailableConnEntry .1.3.6.1.4.1.388.11.3.4.1.6.2 |
apRadioMeshAvailableConnEntry ApRadioMeshAvailableConnEntry .1.3.6.1.4.1.388.11.3.4.1.6.2.1 |
apRadioMeshAvailableConnIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.6.2.1.1 |
apRadioMeshAvailableConnMacMac Address of Available Base Bridge.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.6.2.1.2 |
apRadioMeshAvailableConnChannelChannel of Available Base Bridge.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.6.2.1.3 |
apRadioMeshAvailableConnRssiRSSI value of Available Base Bridge.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.6.2.1.4 |
apRadioMeshPreferredConnTableTable of Preferred Base Bridge MESH connections. SEQUENCE OF ApRadioMeshPreferredConnEntry .1.3.6.1.4.1.388.11.3.4.1.6.3 |
apRadioMeshPreferredConnEntry ApRadioMeshPreferredConnEntry .1.3.6.1.4.1.388.11.3.4.1.6.3.1 |
apRadioMeshPreferredConnIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.1.6.3.1.1 |
apRadioMeshPreferredConnPriorityPreferred Base Bridge Priority.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.6.3.1.2 |
apRadioMeshPreferredConnMacPreferred Base Bridge MAC Address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.6.3.1.3 |
apRadioMeshPreferredConnRowStatusRow Status used to add or delete entries.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.1.6.3.1.4 |
apRadioWlanBandwidthTableTable of Radio Wlan Bandwidth management. SEQUENCE OF ApRadioWlanBandwidthEntry .1.3.6.1.4.1.388.11.3.4.1.7 |
apRadioWlanBandwidthEntry ApRadioWlanBandwidthEntry .1.3.6.1.4.1.388.11.3.4.1.7.1 |
apRadioWlanWeightThe weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100.rw Integer32 .1.3.6.1.4.1.388.11.3.4.1.7.1.1 |
apRadioNSettingsTableThis table adds 802.11n specific settings for an 'n' radio in addition to the common settings under apRadioSettingsTable. SEQUENCE OF ApRadioNSettingsEntry .1.3.6.1.4.1.388.11.3.4.1.8 |
apRadioNSettingsEntryAn 802.11n radio settings entry. ApRadioNSettingsEntry .1.3.6.1.4.1.388.11.3.4.1.8.1 |
apRadioNSettingsModeThe modes available for an 802.11n radio depend on the radio band. For 5.0 GHz (11an), the modes are: modeA modeN5000MHz modeAandN For 2.4 GHz (11bgn), the modes are: modeBGandN modeBandG modeGandN modeB modeG modeN2400MHzrw Enumeration .1.3.6.1.4.1.388.11.3.4.1.8.1.1 |
apRadioNSettingsHTProtectionStatusThis is a new setting for 802.11n radios that indicates the HT Protection Status. The possible values are: Pure HT (1) non-HT STA on Channel (2) HT with 20 MHz-only STA (3) non-HT STA associated (4)ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.8.1.2 |
apRadioNSettingsBasicRatesFor basic rate the following options are available: (1) 1 and 2 Mbps (2) 1, 2, 5.5 and 11 Mbps (3) 1, 2, 5.5, 11 and 6, 12, 24 Mbps (4) 6, 12 and 24 Mbps (5) MCS 0-7 (6) 6, 12 and 24 Mbps and MCS 0-7 (7) 1, 2, 5.5, 11 and 6, 12, 24 Mbps and MCS 0-7rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.8.1.3 |
apRadioNCfgTableDescription. SEQUENCE OF ApRadioNCfgEntry .1.3.6.1.4.1.388.11.3.4.1.9 |
apRadioNCfgEntryDescription. ApRadioNCfgEntry .1.3.6.1.4.1.388.11.3.4.1.9.1 |
apRadioNCfgPosChannelThe possible channels that can be set when placement = apRadioCfgDesPlacementro Bits .1.3.6.1.4.1.388.11.3.4.1.9.1.1 |
apRadioNCfgDesChannelThe desired channel for the 'n' radio. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)rw AllowedChannels .1.3.6.1.4.1.388.11.3.4.1.9.1.2 |
apRadioNCfgChannelThe channel configuration for the 'n' radio.ro INTEGER .1.3.6.1.4.1.388.11.3.4.1.9.1.3 |
apRadioNCfgChannelWidthWhen this value is set to twentyMhz, the AP works on 20MHz mode for both transmit and receive operations. dynamic: The 20/40 MHz operation is a dynamic feature in which the AP can receive packets from clients that use 20 MHz of bandwidth while transmitting a packet OR that use 40 MHz of bandwidth while transmitting a packet. Likewise, the AP can send packets either with a bandwidth of 20 or 40 MHz. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.9.1.4 |
apRadioNCfgAmsduAggregationMaxRecvSizeThe AP will always be enabled to receive AMSDU frames. The user will be able to set the AMSDU limit to 3839 bytes. This value will be advertised in the HT Capabilities element. The user may be able to enable and disable the transmission of AMSDU frames in future releases.ro Enumeration .1.3.6.1.4.1.388.11.3.4.1.9.1.5 |
apRadioNCfgAmsduTransmitEnabledWhen set to TRUE it enables the transmission of AMSDU frames. Setting it to FALSE disable AMSDU transmission. This object is not supported in the current release, hence it will not be returned during a get/get-next/walk.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.9.1.6 |
apRadioNCfgAmpduAggregationMaxRecvSizeThis value is used to tell other stations the maximum length AMPDU that they can send. The allowed values are: 0 bytes (special case, to disable AMPDU rx-limit). 8191 bytes 16383 bytes 32767 bytes 65535 bytes.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.9.1.7 |
apRadioNCfgAmpduAggregationDensityUsed to configure the AMPDU density which controls how close together the MPDUs are within the AMPDU. The choices are: 0 (none), 1/4 usec, 1/2 usec, 1 usec, 2 usec, 4 usec and 8 usec. Since SNMP cannot represent fractions or decimals, the enumerations are given multiplied by 1000 i.e. in nanoseconds.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.9.1.8 |
apRadioNCfgAmpduTransmitSizeLimitThis is a threshold that controls when the AP will setup a Block ACK agreement with a client to begin aggregating, that is, sending A-MPDU frames, to that client. It takes a range from 0-65535 bytes.rw INTEGER .1.3.6.1.4.1.388.11.3.4.1.9.1.9 |
apRadioNCfgShortGuardIntervalThis is a boolean. The 802.11n AP has an option to configure short guard interval(SGI). The possible values of guard interval are 400ns or 800ns. When the user turns SGI on, both 400ns and 800ns will be enabled together. When the user turns SGI off, only 800ns will be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.9.1.10 |
apRadioNCfgAmpduTransmitEnabledWhen set to TRUE it enables the transmission of AMPDU frames. Setting it to FALSE disable AMPDU transmission.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.9.1.11 |
apRadioNCfgChannelOffsetThe channel offset. When changing 802.11n channels, make changes in the following order: 1) Width (apRadioNCfgChannelWidth) 2) Offset (apRadioNCfgChannelOffset) 3) Channel (apRadioNCfgDesChannel)rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.9.1.12 |
apRadioNMcsRateTableThe AP with the 802.11n radio supports modulation coding schemes (MCS) 0-15. This maps to the table entries 1-16. To the user, this is part of the Set Rates function. SEQUENCE OF ApRadioNMcsRateEntry .1.3.6.1.4.1.388.11.3.4.1.10 |
apRadioNMcsRateEntryAn entry which gives the MCS supported by an 'n' radio in the AP. ApRadioNMcsRateEntry .1.3.6.1.4.1.388.11.3.4.1.10.1 |
apRadioNMcsRateIndexMCS index, from 1-16, corresponding to schemes 0-15.ro INTEGER .1.3.6.1.4.1.388.11.3.4.1.10.1.1 |
apRadioNMcsRate20MHzChanSgiDisabledRate on 20MHz channel with SGI disabledro Integer32 UNITS "Kbps" .1.3.6.1.4.1.388.11.3.4.1.10.1.2 |
apRadioNMcsRate20MHzChanSgiEnabledRate on 20MHz channel with SGI enabledrodeprecated Integer32 UNITS "Kbps" .1.3.6.1.4.1.388.11.3.4.1.10.1.3 |
apRadioNMcsRate40MHzChanSgiDisabledRate on 40MHz channel with SGI disabledro Integer32 UNITS "Kbps" .1.3.6.1.4.1.388.11.3.4.1.10.1.4 |
apRadioNMcsRate40MHzChanSgiEnabledRate on 40MHz channel with SGI enabled.ro Integer32 UNITS "Kbps" .1.3.6.1.4.1.388.11.3.4.1.10.1.5 |
apRadioNMcsRateTypeWhether this MCS rate is basic or supported.rw Enumeration .1.3.6.1.4.1.388.11.3.4.1.10.1.6 |
apRadioNMcsRateEnabledWhether this MCS is disabled (false), or, enabled (true) for this 'n' radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.1.10.1.7 |
apWlan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.2 |
apWlanTableTable of wireless LANs configured on the AP. SEQUENCE OF ApWlanEntry .1.3.6.1.4.1.388.11.3.4.2.1 |
apWlanEntry ApWlanEntry .1.3.6.1.4.1.388.11.3.4.2.1.1 |
apWlanIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.1.1.1 |
apWlanNameName of the WLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.2 |
apWlanEssidESSID of the WLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.3 |
apWlanUseRadioUse either 802.11a radio or 802.11b/g radio, or, for 802.11n radios, select the frequency band i.e. 2.4 GHz or 5.0 GHz.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.1.1.4 |
apWlanMaxMusMaximum number of MU associations is allowed for the WLAN. The total number of MUs for the entire AP cannot exceed 127.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.1.1.5 |
apWlanAclPolicyPoint to the ACL policy used for this WLAN.rw SinglePointer .1.3.6.1.4.1.388.11.3.4.2.1.1.6 |
apWlanSecurityPolicyPoint to the Security policy used for this WLAN.rw SinglePointer .1.3.6.1.4.1.388.11.3.4.2.1.1.7 |
apWlanQosPolicyPoint to the QOS policy used for this WLAN.rw SinglePointer .1.3.6.1.4.1.388.11.3.4.2.1.1.8 |
apWlanAuthKerberosUsernameKerberos Username which is the same as the ESSID if the WLAN uses Kerberos Authenticationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.9 |
apWlanAuthKerberosPasswordKerberos Password for authenticating the AP to the KDC.rw Password .1.3.6.1.4.1.388.11.3.4.2.1.1.10 |
apWlanDisallowMuToMuSet to true to prohibit MU-to-MU communication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.11 |
apWlanUseSecureBeaconEnable the Secure Beacon checkbox to disallow the Access Point from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping into the WLAN. Consider this security measure for a private, corporate network.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.12 |
apWlanAnswerBroadcastEssAnswer broadcast ESS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.13 |
apWlanWeightThe weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100.rwobsolete Integer32 .1.3.6.1.4.1.388.11.3.4.2.1.1.14 |
apWlanVlanModeVLAN mode can either Dynamic or Static.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.1.1.15 |
apWlanVlanIdPoint to the VLAN id corresponding to WLAN.rw SinglePointer .1.3.6.1.4.1.388.11.3.4.2.1.1.16 |
apWlanSubnetThe LAN to which a WLAN is mapped.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.1.1.17 |
apWlanClientBackHaulEnable/Disable MESH Client Backhaul on this WLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.18 |
apWlanHotspotEnable or Disable Hotspot functionality on this WLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.19 |
apWlanEnableRow enable/disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.1.1.20 |
apWlanMuIdleTimeoutMaximum MU idle time in minutes.rw INTEGER .1.3.6.1.4.1.388.11.3.4.2.1.1.21 |
apWlanSecPolicyTableSecurity Policy that can be used by different WLANs. SEQUENCE OF ApWlanSecPolicyEntry .1.3.6.1.4.1.388.11.3.4.2.2 |
apWlanSecPolicyEntry ApWlanSecPolicyEntry .1.3.6.1.4.1.388.11.3.4.2.2.1 |
apWlanSecPolicyIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.2.1.1 |
apWlanSecPolicyNameName of security policy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.2.1.2 |
apWlanSecPolicyAuthenticationIf auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the apWlanAuthEapTable. Likewise, if authKerberos, use the settings in the matching entry in the apWlanAuthKerberosTable.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.2.1.3 |
apWlanSecPolicyEncryptionIf cryptoWep40 or cryptoWep128, additional WEP settings for this WLAN will be used from the matching entry in the apWlanCryptoWepTable. Likewise, if cryptoWpaTkip, use the settings in the matching entry in the apWlanCryptoTkipTable. Likewise, if cryptoKeyguardMcm, use the settings in the matching entry in the apWlanCryptoKeyguardTable. Likewise, if cryptoCcmp, use the settings in the matching entry in the apWlanCryptoCcmpTable.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.2.1.4 |
apWlanSecPolicyPointerToWlanPoints to the WLAN which have this particular security policy.ro MultiPointer63 .1.3.6.1.4.1.388.11.3.4.2.2.1.5 |
apWlanSecPolicyRowStatusRow Status used for Creation or Deletion.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.2.2.1.6 |
apWlanAuth OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.2.3 |
apWlanAuthEapTableTable of EAP authentication settings for each Security Policy using this method. SEQUENCE OF ApWlanAuthEapEntry .1.3.6.1.4.1.388.11.3.4.2.3.1 |
apWlanAuthEapEntry ApWlanAuthEapEntry .1.3.6.1.4.1.388.11.3.4.2.3.1.1 |
apWlanAuthEapReauthenticationEnableEnable reauthentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.3.1.1.1 |
apWlanAuthEapReauthenticationPeriodReauthentication period.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.2 |
apWlanAuthEapReauthenticationMaxRetriesReauthentication max retries.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.3 |
apWlanAuthEapRadius1ServerIP address of the primary RADIUS server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.1.1.4 |
apWlanAuthEapRadius1PortPort number of the primary RADIUS server.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.5 |
apWlanAuthEapRadius1SharedSecretShared secret of the primary RADIUS server.rw Password .1.3.6.1.4.1.388.11.3.4.2.3.1.1.6 |
apWlanAuthEapRadius2ServerIP address of the secondary RADIUS server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.1.1.7 |
apWlanAuthEapRadius2PortPort number of the secondary RADIUS server.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.8 |
apWlanAuthEapRadius2SharedSecretShared secret of the secondary RADIUS server.rw Password .1.3.6.1.4.1.388.11.3.4.2.3.1.1.9 |
apWlanAuthEapMuQuietPeriodMU quiet period.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.10 |
apWlanAuthEapMuTimeoutMU timeout.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.11 |
apWlanAuthEapMuTxPeriodMU Tx period.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.12 |
apWlanAuthEapMuMaxRetriesMU max retries.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.13 |
apWlanAuthEapServerTimeoutServer timeout.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.14 |
apWlanAuthEapServerMaxRetriesServer max retries.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.15 |
apWlanAuthEapRadiusAcctModeRadius Accounting Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.3.1.1.16 |
apWlanAuthEapRadiusAcctMuTimeoutRadius Accounting MU Timeout valuerw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.17 |
apWlanAuthEapRadiusAcctMuRetriesRadius Accounting Number of MU Retries.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.18 |
apWlanAuthEapSyslogModeSyslogging Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.3.1.1.19 |
apWlanAuthEapSyslogServerIpSyslog Server IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.1.1.20 |
apWlanAuthEapRadiusExtAcctServerExternal Radius Accounting Server IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.1.1.21 |
apWlanAuthEapRadiusExtPortPort number of the external RADIUS server.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.1.1.22 |
apWlanAuthEapRadiusExtSharedSecretShared secret of the external RADIUS server.rw Password .1.3.6.1.4.1.388.11.3.4.2.3.1.1.23 |
apWlanAuthKerberosTableTable of Kerberos authentication settings for each Security Policy using this method. SEQUENCE OF ApWlanAuthKerberosEntry .1.3.6.1.4.1.388.11.3.4.2.3.2 |
apWlanAuthKerberosEntry ApWlanAuthKerberosEntry .1.3.6.1.4.1.388.11.3.4.2.3.2.1 |
apWlanAuthKerberosRealmNameRealm name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.3.2.1.1 |
apWlanAuthKerberosKdcServerIp1Primary KDC server IP addr.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.2.1.2 |
apWlanAuthKerberosKdcPort1Primary KDC port.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.2.1.3 |
apWlanAuthKerberosKdcServerIp2Backup KDC server IP addr.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.2.1.4 |
apWlanAuthKerberosKdcPort2Backup KDC port.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.2.1.5 |
apWlanAuthKerberosKdcServerIpRRemote KDC server IP addr.rw IpAddress .1.3.6.1.4.1.388.11.3.4.2.3.2.1.6 |
apWlanAuthKerberosKdcPortRRemote KDC port.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.3.2.1.7 |
apWlanCrypto OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.2.4 |
apWlanCryptoWepTableTable of WEP encryption settings for each Security Policy using this method. SEQUENCE OF ApWlanCryptoWepEntry .1.3.6.1.4.1.388.11.3.4.2.4.1 |
apWlanCryptoWepEntry ApWlanCryptoWepEntry .1.3.6.1.4.1.388.11.3.4.2.4.1.1 |
apWlanCryptoWepPassKeyPass key. If this value is written, the four WepKey1..4 will be overwritten.rw Password .1.3.6.1.4.1.388.11.3.4.2.4.1.1.1 |
apWlanCryptoWepKey1WEP key #1 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.1.1.2 |
apWlanCryptoWepKey2WEP key #2 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.1.1.3 |
apWlanCryptoWepKey3WEP key #3 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.1.1.4 |
apWlanCryptoWepKey4WEP key #4 exactly 13 octets for WEP-128 (104-bit key); exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.1.1.5 |
apWlanCryptoWepKeyToUseSpecifies which WEP key to use.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.4.1.1.6 |
apWlanCryptoWepMixedModeAllow WEP128 clientsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.4.1.1.7 |
apWlanCryptoTkipTableTable of WPA-TKIP encryption settings for each Security Policy using this method. SEQUENCE OF ApWlanCryptoTkipEntry .1.3.6.1.4.1.388.11.3.4.2.4.2 |
apWlanCryptoTkipEntry ApWlanCryptoTkipEntry .1.3.6.1.4.1.388.11.3.4.2.4.2.1 |
apWlanCryptoTkipBcastKeyRotationUse broadcast key rotation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.4.2.1.1 |
apWlanCryptoTkipKeyRotationIntervalBroadcast key rotation, (if enabled), occurs every this many seconds.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.4.2.1.2 |
apWlanCryptoTkipKeyToUseSpecifies whether to use ASCII Passphrase or 256-bit Hex Key.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.4.2.1.3 |
apWlanCryptoTkipPassphraseASCII Passphrase.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.2.1.4 |
apWlanCryptoTkipKeyWPA/TKIP 256 bit Key. No need to enter key if ASCII passphrase is entered.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.2.1.5 |
apWlanCryptoTkipAllowWpa2ClientAllows WPA2 TKIP.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.4.2.1.6 |
apWlanCryptoTkipFastRoamPreAuthAllows Pre-Authentication.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.4.2.1.7 |
apWlanCryptoCcmpTableTable of WPA2-CCMP encryption settings for each Security Policy using this method. SEQUENCE OF ApWlanCryptoCcmpEntry .1.3.6.1.4.1.388.11.3.4.2.4.3 |
apWlanCryptoCcmpEntry ApWlanCryptoCcmpEntry .1.3.6.1.4.1.388.11.3.4.2.4.3.1 |
apWlanCryptoCcmpBcastKeyRotationUse broadcast key rotation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.4.3.1.1 |
apWlanCryptoCcmpKeyRotationIntervalBroadcast key rotation, (if enabled), occurs every this many seconds.rw Unsigned32 .1.3.6.1.4.1.388.11.3.4.2.4.3.1.2 |
apWlanCryptoCcmpKeyToUseSpecifies whether to use ASCII Passphrase or 256-bit Hex Key.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.4.3.1.3 |
apWlanCryptoCcmpPassphraseASCII Passphrase.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.3.1.4 |
apWlanCryptoCcmpKeyWPA2/CCMP 256 bit Key. No need to enter key if ASCII passphrase is entered.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.3.1.5 |
apWlanCryptoCcmpMixedModeAllow WPA-TKIP clientsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.4.3.1.6 |
apWlanCryptoCcmpFastRoamPreAuthEnabling this option enables a client associated with one Access Point to carry out an 802.1x authentication with another Access Point before it roams over to it. The Access Point will cache the keying information of the client until it roams to the new Access Point. This enables the roaming the client to start sending and receiving data sooner by not having to do 802.1x authentication after it roams. Note: This option only works when 802.1x authentication is enabled for the WLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.4.3.1.7 |
apWlanCryptoKeyguardTableTable of KeyGuard-MCM encryption settings for each Security Policy using this method. SEQUENCE OF ApWlanCryptoKeyguardEntry .1.3.6.1.4.1.388.11.3.4.2.4.4 |
apWlanCryptoKeyguardEntry ApWlanCryptoKeyguardEntry .1.3.6.1.4.1.388.11.3.4.2.4.4.1 |
apWlanCryptoKeyguardPassKeyPass key. If this value is written, the four KeyguardKey1..4 will be overwritten.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.4.1.1 |
apWlanCryptoKeyguardKey1Key #1.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.4.1.2 |
apWlanCryptoKeyguardKey2Key #2.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.4.1.3 |
apWlanCryptoKeyguardKey3Key #3.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.4.1.4 |
apWlanCryptoKeyguardKey4Key #4.rw OCTET STRING .1.3.6.1.4.1.388.11.3.4.2.4.4.1.5 |
apWlanCryptoKeyguardKeyToUseSpecifies which WEP key to use.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.4.4.1.6 |
apWlanCryptoKeyguardMixedModeAllow WEP128 clientsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.4.4.1.7 |
apWlanMuAclPolicyTableAccess Control List that can be used by different WLANs. SEQUENCE OF ApWlanMuAclPolicyEntry .1.3.6.1.4.1.388.11.3.4.2.5 |
apWlanMuAclPolicyEntry ApWlanMuAclPolicyEntry .1.3.6.1.4.1.388.11.3.4.2.5.1 |
apWlanMuAclPolicyIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.5.1.1 |
apWlanMuAclPolicyNameName of the Access Control policy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.5.1.2 |
apWlanMuAclPolicyAccessModeMUs match this policy can either be Allowed or Denied association.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.5.1.3 |
apWlanMuAclPolicyPointerToWlanPoints to the WLAN which have this particular MU Acl policy.ro MultiPointer63 .1.3.6.1.4.1.388.11.3.4.2.5.1.4 |
apWlanMuAclPolicyRowStatusRow Status.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.2.5.1.5 |
apWlanMuAclTableTable describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in apWlanMuAclPolicyTable), MU association with each WLAN. SEQUENCE OF ApWlanMuAclEntry .1.3.6.1.4.1.388.11.3.4.2.6 |
apWlanMuAclEntry ApWlanMuAclEntry .1.3.6.1.4.1.388.11.3.4.2.6.1 |
apWlanMuAclIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.6.1.1 |
apWlanMuAclStartingMacStarting MAC address in a range of addresses.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.6.1.2 |
apWlanMuAclEndingMacEnding MAC address in a range of addresses.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.6.1.3 |
apWlanMuAclPointerToAclPolicyPointer to the ACL policy that this row belongs.rw SinglePointer .1.3.6.1.4.1.388.11.3.4.2.6.1.4 |
apWlanMuAclRowStatusRow status.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.2.6.1.5 |
apWlanQosPolicyTableQoS Policy that can be used by different WLANs. SEQUENCE OF ApWlanQosPolicyEntry .1.3.6.1.4.1.388.11.3.4.2.7 |
apWlanQosPolicyEntry ApWlanQosPolicyEntry .1.3.6.1.4.1.388.11.3.4.2.7.1 |
apWlanQosPolicyIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.1 |
apWlanQosPolicyNameName of the QoS policy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.7.1.2 |
apWlanEnableWMMEnable WiFi Multimedia Extension support.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.7.1.3 |
apWlanWMMQosParamPre-Programmed WMM QOS Parameters. manual - Modify parameters wifi11agn - WiFi 11a/11g/11n defaults wifi11b - WiFi 11b defaults default11agn - Symbol 11a/11g/11n defaults default11b - Symbol 11b defaults voice11agn - Symbol 11a/11g/11n voice params voice11b - Symbol 11b voice paramsrw Enumeration .1.3.6.1.4.1.388.11.3.4.2.7.1.4 |
apWlanQosPolicyBackgroundCwMinThis QoS parameter is to be used by the MU for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.5 |
apWlanQosPolicyBackgroundCwMaxThis QoS parameter is to be used by the MU for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.6 |
apWlanQosPolicyBackgroundAifsnThis QoS parameter is to be used by the MU for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.7 |
apWlanQosPolicyBackgroundTxopsTimeThis QoS parameter is to be used by the MU for the Background access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.8 |
apWlanQosPolicyBackgroundTxopsTimeInMSThis QoS parameter is to be used by the MU for the Background access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.9 |
apWlanQosPolicyBestEffortCwMinThis QoS parameter is to be used by the MU for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.10 |
apWlanQosPolicyBestEffortCwMaxThis QoS parameter is to be used by the MU for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.11 |
apWlanQosPolicyBestEffortAifsnThis QoS parameter is to be used by the MU for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.12 |
apWlanQosPolicyBestEffortTxopsTimeThis QoS parameter is to be used by the MU for the Best Effort access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.13 |
apWlanQosPolicyBestEffortTxopsTimeInMSThis QoS parameter is to be used by the MU for the Best Effort access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.14 |
apWlanQosPolicyVideoCwMinThis QoS parameter is to be used by the MU for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.15 |
apWlanQosPolicyVideoCwMaxThis QoS parameter is to be used by the MU for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.16 |
apWlanQosPolicyVideoAifsnThis QoS parameter is to be used by the MU for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.17 |
apWlanQosPolicyVideoTxopsTimeThis QoS parameter is to be used by the MU for the Video access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.18 |
apWlanQosPolicyVideoTxopsTimeInMSThis QoS parameter is to be used by the MU for the Video access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.19 |
apWlanQosPolicyVoiceCwMinThis QoS parameter is to be used by the MU for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.20 |
apWlanQosPolicyVoiceCwMaxThis QoS parameter is to be used by the MU for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.21 |
apWlanQosPolicyVoiceAifsnThis QoS parameter is to be used by the MU for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.22 |
apWlanQosPolicyVoiceTxopsTimeThis QoS parameter is to be used by the MU for the Voice access category.rw Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.23 |
apWlanQosPolicyVoiceTxopsTimeInMSThis QoS parameter is to be used by the MU for the Voice access category.ro Integer32 .1.3.6.1.4.1.388.11.3.4.2.7.1.24 |
apWlanVoicePrioritizationSupport legacy voice prioritization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.7.1.25 |
apWlanMulticastAddr1Multicast address 1.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.7.1.26 |
apWlanMulticastAddr2Multicast address 2.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.2.7.1.27 |
apWlanQosPolicyPointerToWlanPoints to the WLAN which have this particular QOS policy.ro MultiPointer63 .1.3.6.1.4.1.388.11.3.4.2.7.1.28 |
apWlanQosPolicyRowStatusRow Status.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.2.7.1.29 |
apWlanBwShareModeTableDescription. SEQUENCE OF ApWlanBwShareModeEntry .1.3.6.1.4.1.388.11.3.4.2.8 |
apWlanBwShareModeEntryDescription. ApWlanBwShareModeEntry .1.3.6.1.4.1.388.11.3.4.2.8.1 |
apWlanBwShareModeThis variable configures the manner in which bandwidth is shared among the WLANs. Only in mode 'weightedRoundRobin' are the apRadioWlanWeight values for each Radio and WLAN used.rw Enumeration .1.3.6.1.4.1.388.11.3.4.2.8.1.1 |
apHotSpot OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.3 |
apHotSpotTableTable for Hotspot configuration. SEQUENCE OF ApHotSpotEntry .1.3.6.1.4.1.388.11.3.4.3.1 |
apHotSpotEntry ApHotSpotEntry .1.3.6.1.4.1.388.11.3.4.3.1.1 |
apHotSpotDefaultFileModeDefault File Mode for Login, Welcome and Fail Pages.rw Enumeration .1.3.6.1.4.1.388.11.3.4.3.1.1.1 |
apHotSpotExternalLoginPageUrlLogin Page URL on external server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.3.1.1.2 |
apHotSpotExternalWelomePageUrlWelcome Page URL on external server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.3.1.1.3 |
apHotSpotExternalFailPageUrlFail Page URL on external server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.3.1.1.4 |
apHotSpotPriRadiusServerIpIP Address of Primary Radius Server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.rw IpAddress .1.3.6.1.4.1.388.11.3.4.3.1.1.5 |
apHotSpotPriRadiusPortPort for Primary Radius Server.rw Integer32 .1.3.6.1.4.1.388.11.3.4.3.1.1.6 |
apHotSpotPriRadiusSecretShared Secret for Primary Radius Server.rw Password .1.3.6.1.4.1.388.11.3.4.3.1.1.7 |
apHotSpotSecRadiusServerIpIP Address of Secondary Radius Server. Use 127.0.0.1 to use the Local Radius Server on the AP5131.rw IpAddress .1.3.6.1.4.1.388.11.3.4.3.1.1.8 |
apHotSpotSecRadiusPortPort for Secondary Radius Server.rw Integer32 .1.3.6.1.4.1.388.11.3.4.3.1.1.9 |
apHotSpotSecRadiusSecretShared Secret for Secondary Radius Server.rw Password .1.3.6.1.4.1.388.11.3.4.3.1.1.10 |
apHotSpotRadiusAcctModeRadius Accounting Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.3.1.1.11 |
apHotSpotRadiusAcctServerIpExternal Accounting Radius Server.rw IpAddress .1.3.6.1.4.1.388.11.3.4.3.1.1.12 |
apHotSpotRadiusAcctPortPort for External Accounting Radius Server.rw Integer32 .1.3.6.1.4.1.388.11.3.4.3.1.1.13 |
apHotSpotRadiusAcctSecretShared Secret for External Accounting Radius Server.rw Password .1.3.6.1.4.1.388.11.3.4.3.1.1.14 |
apHotSpotRadiusAcctTimeoutRadius Accounting Timeout value.rw Integer32 .1.3.6.1.4.1.388.11.3.4.3.1.1.15 |
apHotSpotRadiusAcctRetryCountRadius Accounting Retry Count value.rw Integer32 .1.3.6.1.4.1.388.11.3.4.3.1.1.16 |
apHotSpotRadiusSessModeRadius Session Timeout Mode (Applicable only for Internal Radius Server)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.3.1.1.17 |
apHotSpotRadiusSessTimeoutRadius Session Timeout (Applicable only for Internal Radius Server)rw Integer32 .1.3.6.1.4.1.388.11.3.4.3.1.1.18 |
apHotSpotWhiteListTableTable of White List entires for HotSpot for the WLANs. SEQUENCE OF ApHotSpotWhiteListEntry .1.3.6.1.4.1.388.11.3.4.3.2 |
apHotSpotWhiteListEntry ApHotSpotWhiteListEntry .1.3.6.1.4.1.388.11.3.4.3.2.1 |
apHotSpotWhiteListIndexSimple Index 1...10ro Integer32 .1.3.6.1.4.1.388.11.3.4.3.2.1.1 |
apHotSpotWhiteListWalledGardenIpIP Address of White List entriesrw IpAddress .1.3.6.1.4.1.388.11.3.4.3.2.1.2 |
apHotSpotWhiteListRowStatusValue to control row creation/deletion.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.3.2.1.3 |
apMus OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.4 |
apMuLocationing OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.4.1 |
apMuLocationingEnableEnable/disable MU Locationing feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.4.1.1 |
apMuLocationingClearSetting this value to TRUE clears all apMuLocationingTable entries. Any probe request heard after that event will be treated as newly heard.rw DoActionNow .1.3.6.1.4.1.388.11.3.4.4.1.2 |
apMuLocationingMaxMusMaximum number of MU's to be reported in the apMuLocationingTable. The minimum number is 20 and maximum 200.rw Integer32 .1.3.6.1.4.1.388.11.3.4.4.1.3 |
apMuLocationingTableThe switch shall store the information received in the probe request messages in this table. SEQUENCE OF ApMuLocationingEntry .1.3.6.1.4.1.388.11.3.4.4.1.4 |
apMuLocationingEntryDescription. ApMuLocationingEntry .1.3.6.1.4.1.388.11.3.4.4.1.4.1 |
apMuLocationingIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.4.1.4.1.1 |
apMuLocationingMuMacMAC address of the MU.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.4.1.4.1.2 |
apMuLocationingPortalMacMAC address of the Portal.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.4.1.4.1.3 |
apMuLocationingSignalStrengthReceived Signal Strength in dBm by the Heard Portal.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.11.3.4.4.1.4.1.4 |
apMuLocationingHeardChannelDescribes on which channel probe is heard.ro Integer32 .1.3.6.1.4.1.388.11.3.4.4.1.4.1.5 |
apMuLocationingHeardTimeDescribes the time when this probe is heard.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.11.3.4.4.1.4.1.6 |
apMuLocationingAddEntryToTableThe switch shall provide option to append information to apMuLocationingTable. SEQUENCE OF ApMuLocationingAddEntryToEntry .1.3.6.1.4.1.388.11.3.4.4.1.5 |
apMuLocationingAddEntryToEntryDescription. ApMuLocationingAddEntryToEntry .1.3.6.1.4.1.388.11.3.4.4.1.5.1 |
apMuLocationingAddMuMacMAC address of the MU.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.4.1.5.1.1 |
apMuLocationingAddPortalMacMAC address of the Portal.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.4.1.5.1.2 |
apMuLocationingAddSignalStrengthReceived Signal Strength in dBm by the Heard Portal.rw Integer32 UNITS "dBm" .1.3.6.1.4.1.388.11.3.4.4.1.5.1.3 |
apMuLocationingAddHeardChannelDescribes on which channel probe is heard.rw Integer32 .1.3.6.1.4.1.388.11.3.4.4.1.5.1.4 |
apMuLocationingAddHeardTimeDescribes the time when this probe is heard.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.11.3.4.4.1.5.1.5 |
apIpFilter OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.5 |
apIpFilterPolicyTableTable of Global IP Filter Policies SEQUENCE OF ApIpFilterPolicyEntry .1.3.6.1.4.1.388.11.3.4.5.1 |
apIpFilterPolicyEntry ApIpFilterPolicyEntry .1.3.6.1.4.1.388.11.3.4.5.1.1 |
apIpFilterPolicyIndexSimple Indexro Integer32 .1.3.6.1.4.1.388.11.3.4.5.1.1.1 |
apIpFilterPolicyNameIP Filter Policy Name. It has to be unique for every policy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.5.1.1.2 |
apIpFilterPolicyProtocolIP Filter Policy Protocol Number.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.1.1.3 |
apIpFilterPolicyStartPortIP Filter Policy Starting Port Numberrw Integer32 .1.3.6.1.4.1.388.11.3.4.5.1.1.4 |
apIpFilterPolicyEndPortIP Filter Policy Ending Port Numberrw Integer32 .1.3.6.1.4.1.388.11.3.4.5.1.1.5 |
apIpFilterPolicySrcStartIpIP Filter Policy Source Start IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.4.5.1.1.6 |
apIpFilterPolicySrcEndIpIP Filter Policy Source End IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.4.5.1.1.7 |
apIpFilterPolicyDestStartIpIP Filter Policy Dest Start IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.4.5.1.1.8 |
apIpFilterPolicyDestEndIpIP Filter Policy Dest End IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.4.5.1.1.9 |
apIpFilterPolicyUseStatusDescription.Indicates whether filter is used by any of the WLAN IP Filter Tables or the TRUNK IP Filter Table. If got used then displays YES otherwise NO.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.5.1.1.10 |
apIpFilterPolicyRowStatusRow Status for creation and deletion of policies.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.5.1.1.11 |
apIpFilterWlan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.5.2 |
apIpFilterWlanTableIP Filter for WLAN SEQUENCE OF ApIpFilterWlanEntry .1.3.6.1.4.1.388.11.3.4.5.2.1 |
apIpFilterWlanEntry ApIpFilterWlanEntry .1.3.6.1.4.1.388.11.3.4.5.2.1.1 |
apIpFilterWlanModeIP Filter Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.5.2.1.1.1 |
apIpFilterWlanDefInActionIP Filter Default IN Action.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.2.1.1.2 |
apIpFilterWlanDefOutActionIP Filter Default OUT Action.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.2.1.1.3 |
apIpFilterWlanInPacketsNumber of incoming packets allowed or denied as a result of the default policyro Counter32 .1.3.6.1.4.1.388.11.3.4.5.2.1.1.4 |
apIpFilterWlanOutPacketsNumber of outgoing packets allowed or denied as a result of the default policyro Counter32 .1.3.6.1.4.1.388.11.3.4.5.2.1.1.5 |
apIpFilterWlanPolicyTableIP Filter Policy for WLANs. SEQUENCE OF ApIpFilterWlanPolicyEntry .1.3.6.1.4.1.388.11.3.4.5.2.2 |
apIpFilterWlanPolicyEntry ApIpFilterWlanPolicyEntry .1.3.6.1.4.1.388.11.3.4.5.2.2.1 |
apIpFilterWlanPolicyIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.5.2.2.1.1 |
apIpFilterWlanPolicyPolicySingle Pointer to the Global IP Filter Policy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.5.2.2.1.2 |
apIpFilterWlanPolicyDirectionIP Filter Policy Direction.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.2.2.1.3 |
apIpFilterWlanPolicyActionIP Filter Policy Action.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.2.2.1.4 |
apIpFilterWlanPolicyRowStatusRow Status for creation and deletion.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.5.2.2.1.5 |
apIpFilterWlanPolicyPacketsNumber of packets allowed or denied as a result of this policy.ro Counter32 .1.3.6.1.4.1.388.11.3.4.5.2.2.1.6 |
apIpFilterLan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.4.5.3 |
apIpFilterLanTableIP Filter for WLAN SEQUENCE OF ApIpFilterLanEntry .1.3.6.1.4.1.388.11.3.4.5.3.1 |
apIpFilterLanEntry ApIpFilterLanEntry .1.3.6.1.4.1.388.11.3.4.5.3.1.1 |
apIpFilterLanIndexDescription.ro Integer32 .1.3.6.1.4.1.388.11.3.4.5.3.1.1.1 |
apIpFilterLanModeIP Filter Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.5.3.1.1.2 |
apIpFilterLanDefInActionIP Filter Default IN Action.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.3.1.1.3 |
apIpFilterLanDefOutActionIP Filter Default OUT Action.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.3.1.1.4 |
apIpFilterLanInPacketsNumber of incoming packets allowed or denied as a result of the default policyro Counter32 .1.3.6.1.4.1.388.11.3.4.5.3.1.1.5 |
apIpFilterLanOutPacketsNumber of outgoing packets allowed or denied as a result of the default policy.ro Counter32 .1.3.6.1.4.1.388.11.3.4.5.3.1.1.6 |
apIpFilterLanPolicyTableIP Filter Policy for WAN Trunk Port. SEQUENCE OF ApIpFilterLanPolicyEntry .1.3.6.1.4.1.388.11.3.4.5.3.2 |
apIpFilterLanPolicyEntry ApIpFilterLanPolicyEntry .1.3.6.1.4.1.388.11.3.4.5.3.2.1 |
apIpFilterLanPolicyIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.4.5.3.2.1.1 |
apIpFilterLanPolicyPolicySingle Pointer to the Global IP Filter Policy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.4.5.3.2.1.2 |
apIpFilterLanPolicyDirectionIP Filter Policy Direction.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.3.2.1.3 |
apIpFilterLanPolicyActionIP Filter Policy Action.rw Enumeration .1.3.6.1.4.1.388.11.3.4.5.3.2.1.4 |
apIpFilterLanPolicyRowStatusRow Status for creation and deletion.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.4.5.3.2.1.5 |
apIpFilterLanPolicyPacketsNumber of packets allowed or denied as a result of this policy.ro Counter32 .1.3.6.1.4.1.388.11.3.4.5.3.2.1.6 |
apSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5 |
apWan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.1 |
apWanVpn OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.1.1 |
apWanVpnTunnelConfig OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.1.1.1 |
apWanVpnKeyAutoTableTable of Auto Key Setting entries. SEQUENCE OF ApWanVpnKeyAutoEntry .1.3.6.1.4.1.388.11.3.5.1.1.1.1 |
apWanVpnKeyAutoEntry ApWanVpnKeyAutoEntry .1.3.6.1.4.1.388.11.3.5.1.1.1.1.1 |
apWanVpnKeyAutoSALifeTimeThe number of seconds that the security association is valid. This is an augumentation to ccWanVpnKeyAutoTable and this particular column for Security Association Life Time has been added as it was missing from the WS2000 MIB.rw Unsigned32 .1.3.6.1.4.1.388.11.3.5.1.1.1.1.1.1 |
apWanPppoe OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.1.2 |
apWanPppoeClientTableDescription. SEQUENCE OF ApWanPppoeClientEntry .1.3.6.1.4.1.388.11.3.5.1.2.1 |
apWanPppoeClientEntryDescription. ApWanPppoeClientEntry .1.3.6.1.4.1.388.11.3.5.1.2.1.1 |
apWanPppoeClientIndexDescription.ro Integer32 (1) .1.3.6.1.4.1.388.11.3.5.1.2.1.1.1 |
apWanPppoeClientIpDescription.ro IpAddress .1.3.6.1.4.1.388.11.3.5.1.2.1.1.2 |
apWanPppoeClientGatewayDescription.ro IpAddress .1.3.6.1.4.1.388.11.3.5.1.2.1.1.3 |
apWanPppoeClientPrimaryDNSServerDescription.ro IpAddress .1.3.6.1.4.1.388.11.3.5.1.2.1.1.4 |
apWanPppoeClientSecondaryDNSServerDescription.ro IpAddress .1.3.6.1.4.1.388.11.3.5.1.2.1.1.5 |
apWanPort OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.1.3 |
apWanPortAutoNegotiationWan Ethernet Port Auto-Negotiation Value.rw Enumeration .1.3.6.1.4.1.388.11.3.5.1.3.1 |
apWanPortSpeedWan Ethernet Port Speed Value. AP5131 does not support oneGbps.rw Enumeration .1.3.6.1.4.1.388.11.3.5.1.3.2 |
apWanPortDuplexWan Ethernet Port Duplex Value.rw Enumeration .1.3.6.1.4.1.388.11.3.5.1.3.3 |
apWanDynDNS OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.1.4 |
apWanDynDNSModeEnable/Disable DynDNS feature on WAN interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.1.4.1 |
apWanDynDNSTableTable of DynDNS configuration entries. SEQUENCE OF ApWanDynDNSEntry .1.3.6.1.4.1.388.11.3.5.1.4.2 |
apWanDynDNSEntryDescription. ApWanDynDNSEntry .1.3.6.1.4.1.388.11.3.5.1.4.2.1 |
apWanDynDNSUsernameDynDNS Username which is used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.1.4.2.1.1 |
apWanDynDNSPasswordDynDNS Password used to access DynDNS service. The user has to create an account in the DynDNS.org site to get a username and passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.1.4.2.1.2 |
apWanDynDNSHostnameDynDNS Hostname which has be linked to the WAN IP address. The hostname entry has to be made in the DynDNS.org site.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.1.4.2.1.3 |
apWanDynDNSIndexIndex for apWanDynDNSTable.ro Integer32 (1) .1.3.6.1.4.1.388.11.3.5.1.4.2.1.4 |
apWanDynDNSUpdateResponseTableTable to display the DynDNS update respone. SEQUENCE OF ApWanDynDNSUpdateResponseEntry .1.3.6.1.4.1.388.11.3.5.1.4.3 |
apWanDynDNSUpdateResponseEntryDescription. ApWanDynDNSUpdateResponseEntry .1.3.6.1.4.1.388.11.3.5.1.4.3.1 |
apWanDynDNSUpdateHostnameThe DynDNS hostname which is linked to the WAN IP Address in the DynDNS.org database.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.1.4.3.1.1 |
apWanDynDNSUpdateIpThe WAN IP address which is linked with the hostname in the DynDNS.org site.ro Integer32 .1.3.6.1.4.1.388.11.3.5.1.4.3.1.2 |
apWanDynDNSUpdateStatusDynDNS update response received from the DynDNS.org.ro Integer32 .1.3.6.1.4.1.388.11.3.5.1.4.3.1.3 |
apWanDynDNSUpdateResponseIndexIndex for apWanDynDNSUpdateResponseTable.ro Integer32 (1) .1.3.6.1.4.1.388.11.3.5.1.4.3.1.4 |
apWanDynDNSPerformUpdatePerform Manual DynDNS Update. An update request to update the WAN IP and hostname is sent to DynDNS.org.rw DoActionNow .1.3.6.1.4.1.388.11.3.5.1.4.4 |
apLan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.2 |
apLanEnableEnable LAN port.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.2.1 |
apLanTimeOutLAN Timeout Statusrw Enumeration .1.3.6.1.4.1.388.11.3.5.2.2 |
apLanTimeOutValueIf LAN is not connected after Timeout period (in seconds), stop the AP from sending beacons.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.3 |
apLanVlanEnableEnable VLAN.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.2.4 |
apLanAdminVlanTagManagement VLAN Tag.rwobsolete Integer32 .1.3.6.1.4.1.388.11.3.5.2.5 |
apLanNativeVlanTagNative VLAN Tag.rwobsolete Integer32 .1.3.6.1.4.1.388.11.3.5.2.6 |
apLan802dt1xAuth OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.2.17 |
apLan802dt1xAuthLogin802.1x AP Authentication username.rw DisplayString .1.3.6.1.4.1.388.11.3.5.2.17.2 |
apLan802dt1xAuthPass802.1x AP Authentication password.rw Password .1.3.6.1.4.1.388.11.3.5.2.17.3 |
apLanVlan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.2.18 |
apVlanTableTable of VLAN entries. SEQUENCE OF ApVlanEntry .1.3.6.1.4.1.388.11.3.5.2.18.1 |
apVlanEntry ApVlanEntry .1.3.6.1.4.1.388.11.3.5.2.18.1.1 |
apVlanIndexSimple Index (1...16)ro Integer32 .1.3.6.1.4.1.388.11.3.5.2.18.1.1.1 |
apVlanIdVLAN id.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.18.1.1.2 |
apVlanNameVLAN name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.2.18.1.1.3 |
apVlanPointerToWlanPointer to WLAN associated with this particular VLAN.ro MultiPointer63 .1.3.6.1.4.1.388.11.3.5.2.18.1.1.4 |
apVlanRowStatusRow Status.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.5.2.18.1.1.5 |
apSubnet OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.2.19 |
apSubnetTableTable of Subnets. SEQUENCE OF ApSubnetEntry .1.3.6.1.4.1.388.11.3.5.2.19.1 |
apSubnetEntry ApSubnetEntry .1.3.6.1.4.1.388.11.3.5.2.19.1.1 |
apSubnetDhcpStateSpecifies how Subnet gets its IP address/mask.rw Enumeration .1.3.6.1.4.1.388.11.3.5.2.19.1.1.1 |
apSubnetVlanEnableEnable VLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.2.19.1.1.2 |
apSubnetTypeFilterAccessModePackets can either be Forwarded or Discarded.rw Enumeration .1.3.6.1.4.1.388.11.3.5.2.19.1.1.3 |
apSubnetAdminVlanTagManagement VLAN Tag.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.19.1.1.4 |
apSubnetNativeVlanTagNative VLAN Tag.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.19.1.1.5 |
apLanTypeFilterAccessModePackets can either be Forwarded or Discarded.rwobsolete Enumeration .1.3.6.1.4.1.388.11.3.5.2.20 |
apLanTypeFilterTableTable describing ACLs for allowing or denying, (depending on default behavior for the WLAN specified in apLanTypeFilterAccessMode), MU association with each WLAN. SEQUENCE OF ApLanTypeFilterEntry .1.3.6.1.4.1.388.11.3.5.2.21 |
apLanTypeFilterEntry ApLanTypeFilterEntry .1.3.6.1.4.1.388.11.3.5.2.21.1 |
apLanTypeFilterSubnetIndexSubnet Index for Type Filterro Integer32 .1.3.6.1.4.1.388.11.3.5.2.21.1.1 |
apLanTypeFilterIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.11.3.5.2.21.1.2 |
apLanTypeFilterEthernet type to be filtered.rw EthernetType .1.3.6.1.4.1.388.11.3.5.2.21.1.3 |
apLanTypeFilterRowStatusRow status.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.5.2.21.1.4 |
apLanEthernetPortThe Subnet to which the LAN ethernet port is mapped.rw Enumeration .1.3.6.1.4.1.388.11.3.5.2.22 |
apLanBridgeTableTable for Bridge Spanning Tree for a Subnet. SEQUENCE OF ApLanBridgeEntry .1.3.6.1.4.1.388.11.3.5.2.23 |
apLanBridgeEntry ApLanBridgeEntry .1.3.6.1.4.1.388.11.3.5.2.23.1 |
apLanBridgePriorityBridge Priorityrw Integer32 .1.3.6.1.4.1.388.11.3.5.2.23.1.1 |
apLanBridgeMaxMsgAgeBridge Max Message Age Time.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.23.1.2 |
apLanBridgeHelloTimeBridge Hello Time.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.23.1.3 |
apLanBridgeFwdDelayBridge Forward Delay.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.23.1.4 |
apLanBridgeEntryAgeoutBridge Forwarding Database Ageout value.rw Integer32 .1.3.6.1.4.1.388.11.3.5.2.23.1.5 |
apLanPort OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.2.24 |
apLanPortAutoNegotiationLan Ethernet Port Auto-Negotiation Value.rw Enumeration .1.3.6.1.4.1.388.11.3.5.2.24.1 |
apLanPortSpeedLan Ethernet Port Speed Value. AP5131 does not support oneGbps.rw Enumeration .1.3.6.1.4.1.388.11.3.5.2.24.2 |
apLanPortDuplexLan Ethernet Port Duplex Value.rw Enumeration .1.3.6.1.4.1.388.11.3.5.2.24.3 |
apWnmpPing OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.3 |
apWnmpPingDestMuPing Destination MU Mac Address. This address has to match one of the MU's in the ccMUInfo table.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.3.1 |
apWnmpPingDestAPPing Destination AP Mac Address. This address has to match one of the AP's in apKnownApTable.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.3.2 |
apWnmpPingDestThe destination type of the ping. It can be either an MU or an AP.rw Enumeration .1.3.6.1.4.1.388.11.3.5.3.3 |
apWnmpPingNumNumber of pings.rw Integer32 .1.3.6.1.4.1.388.11.3.5.3.4 |
apWnmpPingPacketLengthLength of the Wnmp ping packet.rw Integer32 .1.3.6.1.4.1.388.11.3.5.3.5 |
apWnmpPingPacketDataThe one-byte data pattern used to fill the Wnmp ping packet.rw OCTET STRING .1.3.6.1.4.1.388.11.3.5.3.6 |
apWnmpPingActionStart and stop ping. Switching from stop to start state will reset apWnmpPingNumResponses to 0.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.3.7 |
apWnmpPingNumResponsesNumber of ping responses received from the destination.ro Integer32 .1.3.6.1.4.1.388.11.3.5.3.8 |
apFlashLed OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.4 |
apFlashLedDestAPLed flash destination AP Mac Address. This address has to match one of the AP's in apKnownApTable.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.4.1 |
apFlashLedActionTurn the led action on or off.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.4.2 |
apKnownAPList OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.5 |
apKnownApTableTable of Known AP Lists. SEQUENCE OF ApKnownApEntry .1.3.6.1.4.1.388.11.3.5.5.1 |
apKnownApEntry ApKnownApEntry .1.3.6.1.4.1.388.11.3.5.5.1.1 |
apKnownApIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.5.5.1.1.1 |
apKnownApMacMAC Address of the LAN portro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.2 |
apKnownApIpIP Address of the LAN portro IpAddress .1.3.6.1.4.1.388.11.3.5.5.1.1.3 |
apKnownApChannel1Channel for Radio1 in Dual Radio setupro Integer32 .1.3.6.1.4.1.388.11.3.5.5.1.1.4 |
apKnownApChannel2Channel for Radio2 in Dual Radio setupro Integer32 .1.3.6.1.4.1.388.11.3.5.5.1.1.5 |
apKnownApMuNumber of MUs associated.ro Integer32 .1.3.6.1.4.1.388.11.3.5.5.1.1.6 |
apKnownApKbPerSecKilo Bytes in/out per second.ro Integer32 .1.3.6.1.4.1.388.11.3.5.5.1.1.7 |
apKnownApPktsPerSecThe number of combined input and output packets per secro Integer32 .1.3.6.1.4.1.388.11.3.5.5.1.1.8 |
apKnownApRadioType1Radio Type of the first radio in Dual Radio setupro Enumeration .1.3.6.1.4.1.388.11.3.5.5.1.1.9 |
apKnownApRadioType2Radio Type of the second radio in Dual Radio setupro Enumeration .1.3.6.1.4.1.388.11.3.5.5.1.1.10 |
apKnownApTypeHardware Type.ro Enumeration .1.3.6.1.4.1.388.11.3.5.5.1.1.11 |
apKnownApFwVersFirmware Versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.12 |
apKnownApUnitNameSystem Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.13 |
apKnownApEssNameESSID of the particular WLAN.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.14 |
apKnownApSendCfgCopy Configuration file button. When set to 1 the config file of our AP shall be copied onto the Known AP specified.rw DoActionNow .1.3.6.1.4.1.388.11.3.5.5.1.1.15 |
apKnownApSendCfgStatusWhether a copy cfg operation succeeded.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.16 |
apKnownApRadio1ClientBridgeMac1Client Bridge MAC Address 1 on Radio 1.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.17 |
apKnownApRadio1ClientBridgeMac2Client Bridge MAC Address 2 on Radio 1.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.18 |
apKnownApRadio1ClientBridgeMac3Client Bridge MAC Address 3 on Radio 1.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.19 |
apKnownApRadio2ClientBridgeMac1Client Bridge MAC Address 1 on Radio 2.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.20 |
apKnownApRadio2ClientBridgeMac2Client Bridge MAC Address 2 on Radio 2.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.21 |
apKnownApRadio2ClientBridgeMac3Client Bridge MAC Address 3 on Radio 2.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.5.1.1.22 |
apAap OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.5.6 |
apAapSwitchAutoDiscoveryEnableThe value true means Hybrid AP Switch Auto Discovery is enabled and false means it is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.6.1 |
apAapSwitchDiscoveryInterfaceHybrid AP Switch Discovery Interface.rw Enumeration .1.3.6.1.4.1.388.11.3.5.6.2 |
apAapSwitchDiscoveryIPAddressTableTable of static IP addresses used in Switch Discovery for Hybrid AP. SEQUENCE OF ApAapSwitchDiscoveryIPAddressEntry .1.3.6.1.4.1.388.11.3.5.6.3 |
apAapSwitchDiscoveryIPAddressEntryapSwitchDiscoveryIPAddressEntry ApAapSwitchDiscoveryIPAddressEntry .1.3.6.1.4.1.388.11.3.5.6.3.1 |
apAapSwitchDiscoveryIPAddressIndexSimple Index (1...6)ro Integer32 .1.3.6.1.4.1.388.11.3.5.6.3.1.1 |
apAapSwitchDiscoveryIPAddressHybrid AP Switch Discovery IP Address.rw IpAddress .1.3.6.1.4.1.388.11.3.5.6.3.1.2 |
apAapSwitchDiscoveryIPAddressRowStatusSimple Row Status.rw Enumeration .1.3.6.1.4.1.388.11.3.5.6.3.1.3 |
apAapSwitchDiscoveryDomainNameHybrid AP Switch Discovery Domain Name.rw DisplayString .1.3.6.1.4.1.388.11.3.5.6.4 |
apAapSwitchDiscoveryPortHybrid AP Switch Discovery Port.rw Integer32 .1.3.6.1.4.1.388.11.3.5.6.5 |
apAapPassphraseHybrid AP Passphrase. Before the AP sends the first packet to request mode and configuration, the switch and the AP should establish a secure link with this pre-shared key or passphrase.rw Password .1.3.6.1.4.1.388.11.3.5.6.6 |
apAapTunnelToSwitchEnableThis boolean is used by the AP to determine if it needs to establish a secure IPSEC tunnel to the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.5.6.7 |
apAapAcKeepAliveAC Keepalive Period.rw Integer32 .1.3.6.1.4.1.388.11.3.5.6.8 |
apAapAdoptionStateThe adoption state of the hybrid AP.ro Enumeration .1.3.6.1.4.1.388.11.3.5.6.9 |
apAapAdoptingSwitchIPThe IP address of the switch that has currently adopted this hybrid AP. If the AP is not adopted it gives the IP address of the switch that last adopted the AP. This value is null if the AP has never been adopted.ro IpAddress .1.3.6.1.4.1.388.11.3.5.6.10 |
apNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6 |
apMuVlanA MU has been associated with this Radio Address. NOTIFICATION-TYPE .1.3.6.1.4.1.388.11.3.6.1 |
apLanMonitorRadios are either been SHUTTING DOWN or RESTORING because of a certain activity at LAN Port. NOTIFICATION-TYPE .1.3.6.1.4.1.388.11.3.6.2 |
apWpaCounterMeasureWhen a subsequent MIC failure occurs within 60 seconds of the preceding failure, the AP will disassociate all associated STAs. The AP will not deliver any class 3 TKIP encrypted data frames to or from any peer as well as disallow new associations for a period of 60 seconds. NOTIFICATION-TYPE .1.3.6.1.4.1.388.11.3.6.3 |
apMuHotspotStateAn MU is either Authenticated or Deauthenticated on a Hotspot enabled WLAN. Upon authenticating with a Radius Server the state of the MU is changed from HOTSPOT to DATA_READY and the vice versa upon Time out or Logging out of that particular MU. NOTIFICATION-TYPE .1.3.6.1.4.1.388.11.3.6.4 |
apDynDNSUpdateA DynDNS Update has been sent to DynDns.org NOTIFICATION-TYPE .1.3.6.1.4.1.388.11.3.6.5 |
apTrapCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000 |
apTrapCtrlEnableTableTable of Trap Enable entries. SEQUENCE OF ApTrapCtrlEnableEntry .1.3.6.1.4.1.388.11.3.6.1000.1 |
apTrapCtrlEnableEntry ApTrapCtrlEnableEntry .1.3.6.1.4.1.388.11.3.6.1000.1.1 |
apTrapCtrlEnableIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.6.1000.1.1.1 |
apTrapCtrlEnableNameName of the Trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.1.1.2 |
apTrapCtrlEnableEnable/Disbale a particular Trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.1.1.3 |
apTrapCtrlRateLimitThe max rate at which SNMP traps/notifications will be sent from the switch. If the switch detects a particular condition and it has NOT been at least this many seconds since the last trap/notification, this current event will NOT result in a trap/notification. If this value is set to 0, every such event results in a trap/notification. Factory-default state is 10 [seconds].rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.2 |
apTrapCtrlSumStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000.3 |
apTrapCtrlSumStatsTableThis table configures thresholds that can be monitored for - all MUs and/or - all Portals and/or - all WLANs and/or - for the entire switch When a given threshold is crossed, it generates the appropriate corresponding notification, (ccSumStats_: _MU, _Portal, _WLAN, or _Switch). Some thresholds result in notifications when exceeded, and some when the current value sinks below the threshold. This is indicated by the wording of the entry in the entry's _Descr value. In all cases, the summary stat being monitored is the Short value, never the Long value. Note that for thresholds of type thresholdsAvgMuSignal & thresholdsAvgMuNoise, the values being 'watched' are actually negative. In these cases the threshold is specified as a Unsigned32. For example, if you wish to trap on Signal being worse than -75dBm, enter '70'. This works since a user would never want to trap on a threshold of Sinal worse than +10dBm. (SNR is not an issue, since that is a positive value). Any values reported as var-binds in the resultant trap(s) are likewise reported as positive values. SEQUENCE OF ApTrapCtrlSumStatsEntry .1.3.6.1.4.1.388.11.3.6.1000.3.1 |
apTrapCtrlSumStatsEntryThe rows/instances in this table occur at the exact same indices as the corresponding monitored data occurs in the _SumStats tables. For example, row #2 / instance .2 represents the threshold(s) for the _PktsPerSec values for MU, Portal, WLAN, and Switch. If a given threshold does not make sense for one of those 4 entities, its corresponding TruthValue will be false. ApTrapCtrlSumStatsEntry .1.3.6.1.4.1.388.11.3.6.1000.3.1.1 |
apTrapCtrlSumStatsIndexIndex into table. Note that specific thresholds occur at specific instance values as denoted by the enumeration values assigned to this variable.ro Enumeration .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.1 |
apTrapCtrlSumStatsDescrDescription of the threshold.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.2 |
apTrapCtrlSumStatsUnitsUnits of the threshold.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.3 |
apTrapCtrlSumStatsCanBeSetMuIf true, the threshold can be set for MUs. If false, attempting the threshold will return a READ-ONLY.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.4 |
apTrapCtrlSumStatsThresholdMuThe threshold for all MUs. If 0, no threshold checking is performed.( multipled by 100)rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.5 |
apTrapCtrlSumStatsCanBeSetRadioAIf true, the threshold can be set for radio a. If false, attempting the threshold will return a READ-ONLY. Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsCanBeSetRadioN2400MHz or apTrapCtrlSumStatsCanBeSetRadioN5000MHz for 802.11n radios.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.6 |
apTrapCtrlSumStatsThresholdRadioAThe threshold for radio a. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9) Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsThresholdRadioN2400MHz or apTrapCtrlSumStatsThresholdRadioN5000MHz for 802.11n radios.rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.7 |
apTrapCtrlSumStatsCanBeSetRadioBGIf true, the threshold can be set for radio b/g. If false, attempting the threshold will return a READ-ONLY. Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsCanBeSetRadioN2400MHz or apTrapCtrlSumStatsCanBeSetRadioN5000MHz for 802.11n radios.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.8 |
apTrapCtrlSumStatsThresholdRadioBGThe threshold for radio b/g. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9) Note that this object does not apply to 802.11n radios. Please use either apTrapCtrlSumStatsThresholdRadioN2400MHz or apTrapCtrlSumStatsThresholdRadioN5000MHz for 802.11n radios.rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.9 |
apTrapCtrlSumStatsCanBeSetWlanIf true, the threshold can be set for Wlans. If false, attempting the threshold will return a READ-ONLY.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.10 |
apTrapCtrlSumStatsThresholdWlansThe threshold for all Wlans. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.11 |
apTrapCtrlSumStatsCanBeSetAccessPointIf true, the threshold can be set for the entire access point. If false, attempting the threshold will return a READ-ONLY.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.12 |
apTrapCtrlSumStatsThresholdAccessPointThe threshold for the entire Access Point. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9)rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.13 |
apTrapCtrlSumStatsCanBeSetRadioN5000MHzIf true, the threshold can be set for radio n, 5.0 GHz frequency band. If false, attempting the threshold will return a READ-ONLY.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.14 |
apTrapCtrlSumStatsThresholdRadioN5000MHzThe threshold for radio n, 5.0 GHz frequency band. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9).rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.15 |
apTrapCtrlSumStatsCanBeSetRadioN2400MHzIf true, the threshold can be set for radio n, 2.4 GHz frequency band. If false, attempting the threshold will return a READ-ONLY.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.16 |
apTrapCtrlSumStatsThresholdRadioN2400MHzThe threshold for radio n, 2.4 GHz frequency band. If 0, no threshold checking is performed.( multipled by 100, except for 'No. of MUs associated', index 9).rw Unsigned32 .1.3.6.1.4.1.388.11.3.6.1000.3.1.1.17 |
apTrapMuVlan OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000.4 |
apTrapMuMacMU that has been associated.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.4.1 |
apTrapRadioMacRadio to be which MU has been associated.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.4.2 |
apTrapVlanIdDynamic VLAN ID assigned to the MU.ro Integer32 .1.3.6.1.4.1.388.11.3.6.1000.4.3 |
apTrapLanMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000.5 |
apTrapLanMonitorModeAction taken by the Radios either Shutting Down or Restoring Up.rw Enumeration .1.3.6.1.4.1.388.11.3.6.1000.5.1 |
apTrapLanMonitorReasonActivity at the LAN port which caused this event to happen.ro Enumeration .1.3.6.1.4.1.388.11.3.6.1000.5.2 |
apTrapWpaCounterMeasure OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000.6 |
apTrapWpaCounterMeasureEssidESSID for which MIC failure happened.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.6.1 |
apTrapCtrlMuHotspotState OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000.7 |
apTrapCtrlMuMacThe MAC Address of the MU which undergoes a state changed on a Hotspot enabled WLAN.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.6.1000.7.1 |
apTrapCtrlMuHotspotStateChangeThe change in the state of an MU associated on a Hotspot enabled WLAN.ro Enumeration .1.3.6.1.4.1.388.11.3.6.1000.7.2 |
apTrapCtrlDynDNSUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.6.1000.8 |
apTrapCtrlDynDNSUpdateIpDescription.rw OCTET STRING .1.3.6.1.4.1.388.11.3.6.1000.8.1 |
apTrapCtrlDynDNSUpdateHostnameDescription.rw OCTET STRING .1.3.6.1.4.1.388.11.3.6.1000.8.2 |
apTrapCtrlDynDNSUpdateStatusDescription.rw OCTET STRING .1.3.6.1.4.1.388.11.3.6.1000.8.3 |
apRap OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.7 |
apRapControl OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.7.1 |
apRapControlDetectors OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.7.1.1 |
apRapDetectorModeDetector Mode and Band for RF scan. It can either be specified to A band or BG band. This setting does not apply to 802.11n radios.rw Enumeration .1.3.6.1.4.1.388.11.3.7.1.1.1 |
apRapDetectorABGModeDetector Mode to scan both A and BG Bands. apRapDetectorMode is used to determine which radio to use. This setting does not apply to 802.11n radios.rw Enumeration .1.3.6.1.4.1.388.11.3.7.1.1.2 |
apLoadCfg OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.8 |
apLoadCfgOperationSpecifies the type and direction of the transfer to perform involving the configuration file.rw Enumeration .1.3.6.1.4.1.388.11.3.8.1 |
apLoadCfgServerPathThe path to the firmware on the TFTP/FTP server. Remember that the type of separator varies depending on the operating system of the server. For Windows, use '\', for Unix use '/'. No path need be specified, (in which case the default directory for the TFTP/FTP server will be used); if a path is specified, remember to terminate it with a trailing '/' or '\'.rw DisplayString .1.3.6.1.4.1.388.11.3.8.2 |
apLoadCfgServerFilenameThe name, (on the server), of the configuration file to load/store from/to the server.rw DisplayString .1.3.6.1.4.1.388.11.3.8.3 |
apLoadCfgServerIpAddrIP address of the server used for a configuration file load/store operation.rw IpAddress .1.3.6.1.4.1.388.11.3.8.4 |
apLoadCfgFtpUsernameUsername for FTP LoadCfg operations.rw DisplayString .1.3.6.1.4.1.388.11.3.8.5 |
apLoadCfgFtpPasswordPassword for FTP LoadCfg operations.rw DisplayString .1.3.6.1.4.1.388.11.3.8.6 |
apLoadCfgStartSet this value to start the configuration file operation. Note that unlike a firmware load, the actual FTP/TFTP transfer does begin virtually immediately.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.8.7 |
apLoadCfgOperationsDoneThis value counts the total number of configuration file transfers completed, (whether they succeed or fail). The SNMP manager should save the value of this counter just before starting a LoadCfg operation, and then wait for this value to increment before checking the Result and/or Success values.ro Counter32 .1.3.6.1.4.1.388.11.3.8.8 |
apLoadCfgResultThis value reflects the result of the most-recent configuration file load/store.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.8.9 |
apLoadCfgSuccessThe success/failure status of the most recent configuration file load/store.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.8.10 |
apStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9 |
apWanClearStatsClear the WAN stats.rw DoActionNow .1.3.6.1.4.1.388.11.3.9.1 |
apLanClearStatsClear the LAN stats. For clearing LAN1 stats set to lan1 (1) and for clearing LAN2 stats set to lan2 (2).rw Enumeration .1.3.6.1.4.1.388.11.3.9.2 |
apRadioClearStatsClear the Radio stats.rw DoActionNow .1.3.6.1.4.1.388.11.3.9.3 |
apWlanClearStatsClear the WLAN stats.rw DoActionNow .1.3.6.1.4.1.388.11.3.9.4 |
apMuClearStatsClear the MU stats.rw DoActionNow .1.3.6.1.4.1.388.11.3.9.5 |
apKnownAPClearStatsClear the Known AP List.rw DoActionNow .1.3.6.1.4.1.388.11.3.9.6 |
apWirelessAPStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9.7 |
apMeshStatsTableMESH Bridge Statistics SEQUENCE OF ApMeshStatsEntry .1.3.6.1.4.1.388.11.3.9.7.1 |
apMeshStatsEntry ApMeshStatsEntry .1.3.6.1.4.1.388.11.3.9.7.1.1 |
apMeshStatsIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.1.1.1 |
apMeshStatsConnTypeMESH Connection Type.ro Enumeration .1.3.6.1.4.1.388.11.3.9.7.1.1.2 |
apMeshStatsMacMAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.7.1.1.3 |
apMeshStatsWlanPtrWLAN Pointer.ro SinglePointer .1.3.6.1.4.1.388.11.3.9.7.1.1.4 |
apMeshStatsRadioTypeRadio Type. 'dot11a' means an 802.11a standard radio that uses the 5GHz band. 'dot11bg' means an 802.11b and 802.11g standards radio that uses the 2.4 GHz band. 'dot11n' means an 802.11n radio can use both 2.4 GHz and/or 5 GHz bands.ro Enumeration .1.3.6.1.4.1.388.11.3.9.7.1.1.5 |
apMeshStatsThroughputThroughput (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.1.1.6 |
apMeshStatsAvgBitSpeedAverage Bit Speed (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.1.1.7 |
apMeshStatsRetriesRetries (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.1.1.8 |
apMeshBridgeStatsTableMESH Wireless Bridge Statistics. SEQUENCE OF ApMeshBridgeStatsEntry .1.3.6.1.4.1.388.11.3.9.7.2 |
apMeshBridgeStatsEntry ApMeshBridgeStatsEntry .1.3.6.1.4.1.388.11.3.9.7.2.1 |
apMeshBridgeStatsIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.1 |
apMeshBridgeStatsMacMAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.7.2.1.2 |
apMeshBridgeStatsWlanPtrWLAN Pointer.ro SinglePointer .1.3.6.1.4.1.388.11.3.9.7.2.1.3 |
apMeshBridgeStatsLanPtrLAN Pointer.ro SinglePointer .1.3.6.1.4.1.388.11.3.9.7.2.1.4 |
apMeshBridgeStatsRadioTypeRadio Type. 'dot11a' means an 802.11a standard radio that uses the 5GHz band. 'dot11bg' means an 802.11b and 802.11g standards radio that uses the 2.4 GHz band. 'dot11n' means an 802.11n radio can use both 2.4 GHz and/or 5 GHz bands.ro Enumeration .1.3.6.1.4.1.388.11.3.9.7.2.1.5 |
apMeshBridgeStatsAuthTypeAuthentication method.ro Enumeration .1.3.6.1.4.1.388.11.3.9.7.2.1.6 |
apMeshBridgeStatsEncTypeEncryption method.ro Enumeration .1.3.6.1.4.1.388.11.3.9.7.2.1.7 |
apMeshBridgeStatsPktsPerSecRxPackets received per second.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.8 |
apMeshBridgeStatsPksPerSecTxPackets transmitted per second.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.9 |
apMeshBridgeStatsPktsPerSecTotalTotal Packets per second.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.10 |
apMeshBridgeStatsThroughputRxThroughput received (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.11 |
apMeshBridgeStatsThroughputTxThroughput transmitted (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.12 |
apMeshBridgeStatsThroughputTotalTotal Throughput (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.13 |
apMeshBridgeStatsAvgBitSpeedAverage Bit Speed (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.14 |
apMeshBridgeStatsAvgMuSignalAverage MU Signal (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.15 |
apMeshBridgeStatsAvgMuNoiseAverage MU Noise (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.16 |
apMeshBridgeStatsAvgMuSnrAverage MU Signal to Noise ratio (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.17 |
apMeshBridgeStatsAvgRetriesAverage Retries (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.18 |
apMeshBridgeStatsPktsDroppedPercentage of Packets dropped (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.19 |
apMeshBridgeStatsUndecryptablePktsPercentage of Undecryptable Packets (x 100).ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.2.1.20 |
apLanSTPStatsTableTable of LAN Spanning Tree Statistics. SEQUENCE OF ApLanSTPStatsEntry .1.3.6.1.4.1.388.11.3.9.7.3 |
apLanSTPStatsEntry ApLanSTPStatsEntry .1.3.6.1.4.1.388.11.3.9.7.3.1 |
apLanSTPStatsDesignatedRootDesignated Root.ro OCTET STRING .1.3.6.1.4.1.388.11.3.9.7.3.1.1 |
apLanSTPStatsBridgeIdBridge ID.ro OCTET STRING .1.3.6.1.4.1.388.11.3.9.7.3.1.2 |
apLanSTPStatsRootPortRoot Port.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.3.1.3 |
apLanSTPStatsRootPathCostRoot Path Cost.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.3.1.4 |
apLanSTPStatsBridgeMaxMsgAgeBridge Max Message Age.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.3.1.5 |
apLanSTPStatsBridgeHelloTimeBridge Hello Time.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.3.1.6 |
apLanSTPStatsBridgeFwDelayBridge Forward Delay.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.3.1.7 |
apLanSTPStatsPortIntfTableTable of LAN Spanning Tree Port Interface Statistics. SEQUENCE OF ApLanSTPStatsPortIntfEntry .1.3.6.1.4.1.388.11.3.9.7.4 |
apLanSTPStatsPortIntfEntry ApLanSTPStatsPortIntfEntry .1.3.6.1.4.1.388.11.3.9.7.4.1 |
apLanSTPStatsPortIntfLanIndexLAN index.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.4.1.1 |
apLanSTPStatsPortIntfPortIndexPort Index.rw Integer32 .1.3.6.1.4.1.388.11.3.9.7.4.1.2 |
apLanSTPStatsPortIntfPortNamePort Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.7.4.1.3 |
apLanSTPStatsPortIntfStateState of the Port.ro Enumeration .1.3.6.1.4.1.388.11.3.9.7.4.1.4 |
apLanSTPStatsPortIntfPathCostPath Cost.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.4.1.5 |
apLanSTPStatsPortIntfDsgRootDesignated Root.ro OCTET STRING .1.3.6.1.4.1.388.11.3.9.7.4.1.6 |
apLanSTPStatsPortIntfDsgBridgeDesignated Bridge.ro OCTET STRING .1.3.6.1.4.1.388.11.3.9.7.4.1.7 |
apLanSTPStatsPortIntfDsgPortDesignated Port.ro OCTET STRING .1.3.6.1.4.1.388.11.3.9.7.4.1.8 |
apLanSTPStatsPortIntfDsgCostDesignated Cost.ro Integer32 .1.3.6.1.4.1.388.11.3.9.7.4.1.9 |
apnStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9.8 |
apnRadioStatsTableAPN radio statistics table. SEQUENCE OF ApnRadioStatsEntry .1.3.6.1.4.1.388.11.3.9.8.1 |
apnRadioStatsEntryAPN radio statistics entry. ApnRadioStatsEntry .1.3.6.1.4.1.388.11.3.9.8.1.1 |
apnRadioStatsIndexA simple integer index to the apnRadioStatsTable.ro INTEGER .1.3.6.1.4.1.388.11.3.9.8.1.1.2 |
apnRadioStatsBssidThe BSSID (MAC address) of the radio.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.8.1.1.3 |
apnRadioStatsApSsidThe SSID of the AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.8.1.1.4 |
apnRadioStatsChannelThe channel number for the radio.ro INTEGER .1.3.6.1.4.1.388.11.3.9.8.1.1.5 |
apnRadioStatsExtnChannelThe extension channel for the radio, when in 40MHz.ro INTEGER .1.3.6.1.4.1.388.11.3.9.8.1.1.6 |
apnRadioStatsRssiAvgAcrossAntennasThe average RSSI of all the antennas combined together.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.11.3.9.8.1.1.7 |
apnRadioStatsChannelWidthModeThe channel bandwidth mode for the radio.ro Enumeration .1.3.6.1.4.1.388.11.3.9.8.1.1.8 |
apnRadioStatsOpFreqThe operational frequency for the radio.ro Enumeration .1.3.6.1.4.1.388.11.3.9.8.1.1.9 |
apnRadioStatsNumPktsRxSGI400nsNumber of packets received by this radio with Short Guard Interval of 400ns.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.10 |
apnRadioStatsNumPktsRxSGI800nsNumber of packets received by this radio with Short Guard Interval of 800ns.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.11 |
apnRadioStatsNumPktsTxSGI400nsNumber of packets transmitted by this radio with Short Guard Interval of 400ns.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.12 |
apnRadioStatsNumPktsTxSGI800nsNumber of packets transmitted by this radio with Short Guard Interval of 800ns.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.13 |
apnRadioStatsNumPktsRxChanWidth20MHzNumber of packets received by this radio with channel width 20 MHz.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.14 |
apnRadioStatsNumPktsRxChanWidth40MHzNumber of packets received by this radio with channel width 40 MHz.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.15 |
apnRadioStatsNumPktsTxChanWidth20MHzNumber of packets transmitted by this radio with channel width 20 MHz.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.16 |
apnRadioStatsNumPktsTxChanWidth40MHzNumber of packets transmitted by this radio with channel width 40 MHz.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.1.1.17 |
apnPortalRxPktsTableFor each 802.11n Portal on the AP, this table describes counts of packets received at each speed. SEQUENCE OF ApnPortalRxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.2 |
apnPortalRxPktsEntryAn entry in the portal received packets table. ApnPortalRxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.2.1 |
apnPortalRxPktsAt1MbNumber of pkts received via this Portal at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.1 |
apnPortalRxPktsAt2MbNumber of pkts received via this Portal at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.2 |
apnPortalRxPktsAt5pt5MbNumber of pkts received via this Portal at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.3 |
apnPortalRxPktsAt6MbNumber of pkts received via this Portal at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.4 |
apnPortalRxPktsAt9MbNumber of pkts received via this Portal at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.5 |
apnPortalRxPktsAt11MbNumber of pkts received via this Portal at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.6 |
apnPortalRxPktsAt12MbNumber of pkts received via this Portal at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.7 |
apnPortalRxPktsAt18MbNumber of pkts received via this Portal at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.8 |
apnPortalRxPktsAt24MbNumber of pkts received via this Portal at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.9 |
apnPortalRxPktsAt36MbNumber of pkts received via this Portal at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.10 |
apnPortalRxPktsAt48MbNumber of pkts received via this Portal at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.11 |
apnPortalRxPktsAt54MbNumber of pkts received via this Portal at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.12 |
apnPortalRxPktsAtMCS0Number of pkts received via this Portal at MCS 0 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.13 |
apnPortalRxPktsAtMCS1Number of pkts received via this Portal at MCS 1 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.14 |
apnPortalRxPktsAtMCS2Number of pkts received via this Portal at MCS 2 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.15 |
apnPortalRxPktsAtMCS3Number of pkts received via this Portal at MCS 3 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.16 |
apnPortalRxPktsAtMCS4Number of pkts received via this Portal at MCS 4 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.17 |
apnPortalRxPktsAtMCS5Number of pkts received via this Portal at MCS 5 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.18 |
apnPortalRxPktsAtMCS6Number of pkts received via this Portal at MCS 6 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.19 |
apnPortalRxPktsAtMCS7Number of pkts received via this Portal at MCS 7 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.20 |
apnPortalRxPktsAtMCS8Number of pkts received via this Portal at MCS 8 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.21 |
apnPortalRxPktsAtMCS9Number of pkts received via this Portal at MCS 9 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.22 |
apnPortalRxPktsAtMCS10Number of pkts received via this Portal at MCS 10 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.23 |
apnPortalRxPktsAtMCS11Number of pkts received via this Portal at MCS 11 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.24 |
apnPortalRxPktsAtMCS12Number of pkts received via this Portal at MCS 12 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.25 |
apnPortalRxPktsAtMCS13Number of pkts received via this Portal at MCS 13 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.26 |
apnPortalRxPktsAtMCS14Number of pkts received via this Portal at MCS 14 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.27 |
apnPortalRxPktsAtMCS15Number of pkts received via this Portal at MCS 15 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.2.1.28 |
apnPortalTxPktsTableFor each 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed. SEQUENCE OF ApnPortalTxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.3 |
apnPortalTxPktsEntryAn entry in the portal transmitted packets table. ApnPortalTxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.3.1 |
apnPortalTxPktsAt1MbNumber of pkts transmitted via this Portal at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.1 |
apnPortalTxPktsAt2MbNumber of pkts transmitted via this Portal at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.2 |
apnPortalTxPktsAt5pt5MbNumber of pkts transmitted via this Portal at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.3 |
apnPortalTxPktsAt6MbNumber of pkts transmitted via this Portal at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.4 |
apnPortalTxPktsAt9MbNumber of pkts transmitted via this Portal at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.5 |
apnPortalTxPktsAt11MbNumber of pkts transmitted via this Portal at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.6 |
apnPortalTxPktsAt12MbNumber of pkts transmitted via this Portal at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.7 |
apnPortalTxPktsAt18MbNumber of pkts transmitted via this Portal at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.8 |
apnPortalTxPktsAt24MbNumber of pkts transmitted via this Portal at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.9 |
apnPortalTxPktsAt36MbNumber of pkts transmitted via this Portal at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.10 |
apnPortalTxPktsAt48MbNumber of pkts transmitted via this Portal at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.11 |
apnPortalTxPktsAt54MbNumber of pkts transmitted via this Portal at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.12 |
apnPortalTxPktsAtMCS0Number of pkts transmitted via this Portal at MCS 0 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.13 |
apnPortalTxPktsAtMCS1Number of pkts transmitted via this Portal at MCS 1 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.14 |
apnPortalTxPktsAtMCS2Number of pkts transmitted via this Portal at MCS 2 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.15 |
apnPortalTxPktsAtMCS3Number of pkts transmitted via this Portal at MCS 3 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.16 |
apnPortalTxPktsAtMCS4Number of pkts transmitted via this Portal at MCS 4 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.17 |
apnPortalTxPktsAtMCS5Number of pkts transmitted via this Portal at MCS 5 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.18 |
apnPortalTxPktsAtMCS6Number of pkts transmitted via this Portal at MCS 6 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.19 |
apnPortalTxPktsAtMCS7Number of pkts transmitted via this Portal at MCS 7 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.20 |
apnPortalTxPktsAtMCS8Number of pkts transmitted via this Portal at MCS 8 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.21 |
apnPortalTxPktsAtMCS9Number of pkts transmitted via this Portal at MCS 9 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.22 |
apnPortalTxPktsAtMCS10Number of pkts transmitted via this Portal at MCS 10 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.23 |
apnPortalTxPktsAtMCS11Number of pkts transmitted via this Portal at MCS 11 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.24 |
apnPortalTxPktsAtMCS12Number of pkts transmitted via this Portal at MCS 12 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.25 |
apnPortalTxPktsAtMCS13Number of pkts transmitted via this Portal at MCS 13 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.26 |
apnPortalTxPktsAtMCS14Number of pkts transmitted via this Portal at MCS 14 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.27 |
apnPortalTxPktsAtMCS15Number of pkts transmitted via this Portal at MCS 15 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.3.1.28 |
apnPortalRxOctetsTableFor each 802.11n Portal on this AP, this table describes counts of octets received at each speed. SEQUENCE OF ApnPortalRxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.4 |
apnPortalRxOctetsEntryAn entry in the portal received octets table. ApnPortalRxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.4.1 |
apnPortalRxOctetsAt1MbNumber of octets received via this Portal at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.1 |
apnPortalRxOctetsAt2MbNumber of octets received via this Portal at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.2 |
apnPortalRxOctetsAt5pt5MbNumber of octets received via this Portal at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.3 |
apnPortalRxOctetsAt6MbNumber of octets received via this Portal at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.4 |
apnPortalRxOctetsAt9MbNumber of octets received via this Portal at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.5 |
apnPortalRxOctetsAt11MbNumber of octets received via this Portal at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.6 |
apnPortalRxOctetsAt12MbNumber of octets received via this Portal at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.7 |
apnPortalRxOctetsAt18MbNumber of octets received via this Portal at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.8 |
apnPortalRxOctetsAt24MbNumber of octets received via this Portal at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.9 |
apnPortalRxOctetsAt36MbNumber of octets received via this Portal at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.10 |
apnPortalRxOctetsAt48MbNumber of octets received via this Portal at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.11 |
apnPortalRxOctetsAt54MbNumber of octets received via this Portal at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.12 |
apnPortalRxOctetsAtMCS0Number of octets received via this Portal at MCS 0 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.13 |
apnPortalRxOctetsAtMCS1Number of octets received via this Portal at MCS 1 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.14 |
apnPortalRxOctetsAtMCS2Number of octets received via this Portal at MCS 2 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.15 |
apnPortalRxOctetsAtMCS3Number of octets received via this Portal at MCS 3 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.16 |
apnPortalRxOctetsAtMCS4Number of octets received via this Portal at MCS 4 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.17 |
apnPortalRxOctetsAtMCS5Number of octets received via this Portal at MCS 5 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.18 |
apnPortalRxOctetsAtMCS6Number of octets received via this Portal at MCS 6 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.19 |
apnPortalRxOctetsAtMCS7Number of octets received via this Portal at MCS 7 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.20 |
apnPortalRxOctetsAtMCS8Number of octets received via this Portal at MCS 8 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.21 |
apnPortalRxOctetsAtMCS9Number of octets received via this Portal at MCS 9 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.22 |
apnPortalRxOctetsAtMCS10Number of octets received via this Portal at MCS 10 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.23 |
apnPortalRxOctetsAtMCS11Number of octets received via this Portal at MCS 11 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.24 |
apnPortalRxOctetsAtMCS12Number of octets received via this Portal at MCS 12 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.25 |
apnPortalRxOctetsAtMCS13Number of octets received via this Portal at MCS 13 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.26 |
apnPortalRxOctetsAtMCS14Description.Number of octets received via this Portal at MCS 14 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.27 |
apnPortalRxOctetsAtMCS15Number of octets received via this Portal at MCS 15 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.4.1.28 |
apnPortalTxOctetsTableFor each 802.11n Portal on this AP, this table describes counts of octets transmitted at each speed. SEQUENCE OF ApnPortalTxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.5 |
apnPortalTxOctetsEntryAn entry in the portal transmitted octets table. ApnPortalTxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.5.1 |
apnPortalTxOctetsAt1MbNumber of octets transmitted via this Portal at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.2 |
apnPortalTxOctetsAt2MbNumber of octets transmitted via this Portal at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.3 |
apnPortalTxOctetsAt5pt5MbNumber of octets transmitted via this Portal at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.4 |
apnPortalTxOctetsAt6MbNumber of octets transmitted via this Portal at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.5 |
apnPortalTxOctetsAt9MbNumber of octets transmitted via this Portal at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.6 |
apnPortalTxOctetsAt11MbNumber of octets transmitted via this Portal at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.7 |
apnPortalTxOctetsAt12MbNumber of octets transmitted via this Portal at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.8 |
apnPortalTxOctetsAt18MbNumber of octets transmitted via this Portal at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.9 |
apnPortalTxOctetsAt24MbNumber of octets transmitted via this Portal at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.10 |
apnPortalTxOctetsAt36MbNumber of octets transmitted via this Portal at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.11 |
apnPortalTxOctetsAt48MbNumber of octets transmitted via this Portal at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.12 |
apnPortalTxOctetsAt54MbNumber of octets transmitted via this Portal at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.13 |
apnPortalTxOctetsAtMCS0Number of octets transmitted via this Portal at MCS 0 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.14 |
apnPortalTxOctetsAtMCS1Number of octets transmitted via this Portal at MCS 1 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.15 |
apnPortalTxOctetsAtMCS2Number of octets transmitted via this Portal at MCS 2 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.16 |
apnPortalTxOctetsAtMCS3Number of octets transmitted via this Portal at MCS 3 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.17 |
apnPortalTxOctetsAtMCS4Number of octets transmitted via this Portal at MCS 4 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.18 |
apnPortalTxOctetsAtMCS5Number of octets transmitted via this Portal at MCS 5 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.19 |
apnPortalTxOctetsAtMCS6Number of octets transmitted via this Portal at MCS 6 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.20 |
apnPortalTxOctetsAtMCS7Number of octets transmitted via this Portal at MCS 7 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.21 |
apnPortalTxOctetsAtMCS8Number of octets transmitted via this Portal at MCS 8 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.22 |
apnPortalTxOctetsAtMCS9Number of octets transmitted via this Portal at MCS 9 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.23 |
apnPortalTxOctetsAtMCS10Number of octets transmitted via this Portal at MCS 10 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.24 |
apnPortalTxOctetsAtMCS11Number of octets transmitted via this Portal at MCS 11 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.25 |
apnPortalTxOctetsAtMCS12Number of octets transmitted via this Portal at MCS 12 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.26 |
apnPortalTxOctetsAtMCS13Number of octets transmitted via this Portal at MCS 13 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.27 |
apnPortalTxOctetsAtMCS14Number of octets transmitted via this Portal at MCS 14 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.28 |
apnPortalTxOctetsAtMCS15Number of octets transmitted via this Portal at MCS 15 rate.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.5.1.29 |
apnMuRxPktsTableFor each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of packets received at each speed. SEQUENCE OF ApnMuRxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.6 |
apnMuRxPktsEntry ApnMuRxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.6.1 |
apnMuRxPktsAt1MbNumber of pkts received via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.1 |
apnMuRxPktsAt2MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.2 |
apnMuRxPktsAt5pt5MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.3 |
apnMuRxPktsAt6MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.4 |
apnMuRxPktsAt9MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.5 |
apnMuRxPktsAt11MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.6 |
apnMuRxPktsAt12MbNumber of pkts received via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.7 |
apnMuRxPktsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.8 |
apnMuRxPktsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.9 |
apnMuRxPktsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.10 |
apnMuRxPktsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.11 |
apnMuRxPktsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.12 |
apnMuRxPktsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.13 |
apnMuRxPktsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.14 |
apnMuRxPktsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.15 |
apnMuRxPktsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.16 |
apnMuRxPktsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.17 |
apnMuRxPktsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.18 |
apnMuRxPktsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.19 |
apnMuRxPktsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.20 |
apnMuRxPktsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.21 |
apnMuRxPktsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.22 |
apnMuRxPktsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.23 |
apnMuRxPktsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.24 |
apnMuRxPktsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.25 |
apnMuRxPktsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.26 |
apnMuRxPktsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.27 |
apnMuRxPktsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.6.1.28 |
apnMuTxPktsTableFor each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed. SEQUENCE OF ApnMuTxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.7 |
apnMuTxPktsEntry ApnMuTxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.7.1 |
apnMuTxPktsAt1MbNumber of pkts transmitted via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.1 |
apnMuTxPktsAt2MbNumber of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.2 |
apnMuTxPktsAt5pt5MbNumber of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.3 |
apnMuTxPktsAt6MbNumber of pkts transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.4 |
apnMuTxPktsAt9MbNumber of pkts transmitted via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.5 |
apnMuTxPktsAt11MbNumber of pkts transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.6 |
apnMuTxPktsAt12MbNumber of pkts transmitted via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.7 |
apnMuTxPktsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.8 |
apnMuTxPktsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.9 |
apnMuTxPktsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.10 |
apnMuTxPktsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.11 |
apnMuTxPktsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.12 |
apnMuTxPktsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.13 |
apnMuTxPktsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.14 |
apnMuTxPktsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.15 |
apnMuTxPktsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.16 |
apnMuTxPktsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.17 |
apnMuTxPktsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.18 |
apnMuTxPktsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.19 |
apnMuTxPktsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.20 |
apnMuTxPktsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.21 |
apnMuTxPktsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.22 |
apnMuTxPktsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.23 |
apnMuTxPktsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.24 |
apnMuTxPktsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.25 |
apnMuTxPktsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.26 |
apnMuTxPktsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.27 |
apnMuTxPktsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.7.1.28 |
apnMuRxOctetsTableFor each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of octets received at each speed. SEQUENCE OF ApnMuRxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.8 |
apnMuRxOctetsEntry ApnMuRxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.8.1 |
apnMuRxOctetsAt1MbNumber of octets received via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.1 |
apnMuRxOctetsAt2MbNumber of octets received via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.2 |
apnMuRxOctetsAt5pt5MbNumber of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.3 |
apnMuRxOctetsAt6MbNumber of octets received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.4 |
apnMuRxOctetsAt9MbNumber of octets received via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.5 |
apnMuRxOctetsAt11MbNumber of octets received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.6 |
apnMuRxOctetsAt12MbNumber of octets received via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.7 |
apnMuRxOctetsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.8 |
apnMuRxOctetsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.9 |
apnMuRxOctetsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.10 |
apnMuRxOctetsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.11 |
apnMuRxOctetsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.12 |
apnMuRxOctetsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.13 |
apnMuRxOctetsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.14 |
apnMuRxOctetsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.15 |
apnMuRxOctetsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.16 |
apnMuRxOctetsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.17 |
apnMuRxOctetsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.18 |
apnMuRxOctetsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.19 |
apnMuRxOctetsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.20 |
apnMuRxOctetsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.21 |
apnMuRxOctetsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.22 |
apnMuRxOctetsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.23 |
apnMuRxOctetsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.24 |
apnMuRxOctetsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.25 |
apnMuRxOctetsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.26 |
apnMuRxOctetsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.27 |
apnMuRxOctetsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.8.1.28 |
apnMuTxOctetsTableFor each mobile unit associated to an 802.11n Portal on the AP, this table describes counts of octets transmitted at each speed. SEQUENCE OF ApnMuTxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.9 |
apnMuTxOctetsEntry ApnMuTxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.9.1 |
apnMuTxOctetsAt1MbNumber octets transmitted via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.2 |
apnMuTxOctetsAt2MbNumber octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.3 |
apnMuTxOctetsAt5pt5MbNumber octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.4 |
apnMuTxOctetsAt6MbNumber octets transmitted via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.5 |
apnMuTxOctetsAt9MbNumber octets transmitted via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.6 |
apnMuTxOctetsAt11MbNumber octets transmitted via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.7 |
apnMuTxOctetsAt12MbNumber octets transmitted via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.8 |
apnMuTxOctetsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.9 |
apnMuTxOctetsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.10 |
apnMuTxOctetsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.11 |
apnMuTxOctetsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.12 |
apnMuTxOctetsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.13 |
apnMuTxOctetsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.14 |
apnMuTxOctetsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.15 |
apnMuTxOctetsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.16 |
apnMuTxOctetsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.17 |
apnMuTxOctetsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.18 |
apnMuTxOctetsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.19 |
apnMuTxOctetsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.20 |
apnMuTxOctetsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.21 |
apnMuTxOctetsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.22 |
apnMuTxOctetsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.23 |
apnMuTxOctetsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.24 |
apnMuTxOctetsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.25 |
apnMuTxOctetsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.26 |
apnMuTxOctetsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.27 |
apnMuTxOctetsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.28 |
apnMuTxOctetsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.9.1.29 |
apnWlanRxPktsTableFor each wlan on the 802.11n Portal on the AP, this table describes counts of packets received at each speed. SEQUENCE OF ApnWlanRxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.10 |
apnWlanRxPktsEntry ApnWlanRxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.10.1 |
apnWlanRxPktsAt1MbNumber of pkts received via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.1 |
apnWlanRxPktsAt2MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.2 |
apnWlanRxPktsAt5pt5MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.3 |
apnWlanRxPktsAt6MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.4 |
apnWlanRxPktsAt9MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.5 |
apnWlanRxPktsAt11MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.6 |
apnWlanRxPktsAt12MbNumber of pkts received via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.7 |
apnWlanRxPktsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.8 |
apnWlanRxPktsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.9 |
apnWlanRxPktsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.10 |
apnWlanRxPktsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.11 |
apnWlanRxPktsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.12 |
apnWlanRxPktsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.13 |
apnWlanRxPktsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.14 |
apnWlanRxPktsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.15 |
apnWlanRxPktsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.16 |
apnWlanRxPktsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.17 |
apnWlanRxPktsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.18 |
apnWlanRxPktsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.19 |
apnWlanRxPktsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.20 |
apnWlanRxPktsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.21 |
apnWlanRxPktsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.22 |
apnWlanRxPktsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.23 |
apnWlanRxPktsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.24 |
apnWlanRxPktsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.25 |
apnWlanRxPktsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.26 |
apnWlanRxPktsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.27 |
apnWlanRxPktsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.10.1.28 |
apnWlanTxPktsTableFor each wlan on the 802.11n Portal on the AP, this table describes counts of packets transmitted at each speed. SEQUENCE OF ApnWlanTxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.11 |
apnWlanTxPktsEntry ApnWlanTxPktsEntry .1.3.6.1.4.1.388.11.3.9.8.11.1 |
apnWlanTxPktsAt1MbNumber of pkts received via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.1 |
apnWlanTxPktsAt2MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.2 |
apnWlanTxPktsAt5pt5MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.3 |
apnWlanTxPktsAt6MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.4 |
apnWlanTxPktsAt9MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.5 |
apnWlanTxPktsAt11MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.6 |
apnWlanTxPktsAt12MbNumber of pkts received via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.7 |
apnWlanTxPktsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.8 |
apnWlanTxPktsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.9 |
apnWlanTxPktsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.10 |
apnWlanTxPktsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.11 |
apnWlanTxPktsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.12 |
apnWlanTxPktsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.13 |
apnWlanTxPktsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.14 |
apnWlanTxPktsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.15 |
apnWlanTxPktsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.16 |
apnWlanTxPktsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.17 |
apnWlanTxPktsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.18 |
apnWlanTxPktsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.19 |
apnWlanTxPktsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.20 |
apnWlanTxPktsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.21 |
apnWlanTxPktsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.22 |
apnWlanTxPktsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.23 |
apnWlanTxPktsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.24 |
apnWlanTxPktsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.25 |
apnWlanTxPktsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.26 |
apnWlanTxPktsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.27 |
apnWlanTxPktsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.11.1.28 |
apnWlanRxOctetsTableFor each wlan on the 802.11n Portal on the AP, this table describes counts of octets received at each speed. SEQUENCE OF ApnWlanRxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.12 |
apnWlanRxOctetsEntry ApnWlanRxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.12.1 |
apnWlanRxOctetsAt1MbNumber of pkts received via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.1 |
apnWlanRxOctetsAt2MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.2 |
apnWlanRxOctetsAt5pt5MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.3 |
apnWlanRxOctetsAt6MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.4 |
apnWlanRxOctetsAt9MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.5 |
apnWlanRxOctetsAt11MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.6 |
apnWlanRxOctetsAt12MbNumber of pkts received via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.7 |
apnWlanRxOctetsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.8 |
apnWlanRxOctetsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.9 |
apnWlanRxOctetsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.10 |
apnWlanRxOctetsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.11 |
apnWlanRxOctetsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.12 |
apnWlanRxOctetsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.13 |
apnWlanRxOctetsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.14 |
apnWlanRxOctetsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.15 |
apnWlanRxOctetsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.16 |
apnWlanRxOctetsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.17 |
apnWlanRxOctetsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.18 |
apnWlanRxOctetsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.19 |
apnWlanRxOctetsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.20 |
apnWlanRxOctetsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.21 |
apnWlanRxOctetsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.22 |
apnWlanRxOctetsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.23 |
apnWlanRxOctetsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.24 |
apnWlanRxOctetsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.25 |
apnWlanRxOctetsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.26 |
apnWlanRxOctetsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.27 |
apnWlanRxOctetsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.12.1.28 |
apnWlanTxOctetsTableFor each wlan on the 802.11n Portal on the AP, this table describes counts of octets transmitted at each speed. SEQUENCE OF ApnWlanTxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.13 |
apnWlanTxOctetsEntry ApnWlanTxOctetsEntry .1.3.6.1.4.1.388.11.3.9.8.13.1 |
apnWlanTxOctetsAt1MbNumber of pkts received via this Portal at 1 and 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.1 |
apnWlanTxOctetsAt2MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.2 |
apnWlanTxOctetsAt5pt5MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.3 |
apnWlanTxOctetsAt6MbNumber of pkts received via this Portal at 1, 2, 5.5 and 11 Mbps, and, 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.4 |
apnWlanTxOctetsAt9MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.5 |
apnWlanTxOctetsAt11MbNumber of pkts received via this Portal at 6, 12 and 24 Mbps as well as at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.6 |
apnWlanTxOctetsAt12MbNumber of pkts received via this Portal at MCS 0 to 7 rates.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.7 |
apnWlanTxOctetsAt18MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.8 |
apnWlanTxOctetsAt24MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.9 |
apnWlanTxOctetsAt36MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.10 |
apnWlanTxOctetsAt48MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.11 |
apnWlanTxOctetsAt54MbDescription.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.12 |
apnWlanTxOctetsAtMCS0Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.13 |
apnWlanTxOctetsAtMCS1Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.14 |
apnWlanTxOctetsAtMCS2Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.15 |
apnWlanTxOctetsAtMCS3Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.16 |
apnWlanTxOctetsAtMCS4Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.17 |
apnWlanTxOctetsAtMCS5Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.18 |
apnWlanTxOctetsAtMCS6Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.19 |
apnWlanTxOctetsAtMCS7Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.20 |
apnWlanTxOctetsAtMCS8Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.21 |
apnWlanTxOctetsAtMCS9Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.22 |
apnWlanTxOctetsAtMCS10Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.23 |
apnWlanTxOctetsAtMCS11Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.24 |
apnWlanTxOctetsAtMCS12Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.25 |
apnWlanTxOctetsAtMCS13Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.26 |
apnWlanTxOctetsAtMCS14Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.27 |
apnWlanTxOctetsAtMCS15Description.ro Counter32 .1.3.6.1.4.1.388.11.3.9.8.13.1.28 |
apDiagStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9.9 |
apDiagCpuStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9.9.1 |
apDiagCpuLoad1Min% of CPU load averaged over 1 min.ro Unsigned32 .1.3.6.1.4.1.388.11.3.9.9.1.1 |
apDiagCpuLoad5Min% of CPU load averaged over 5 mins.ro Unsigned32 .1.3.6.1.4.1.388.11.3.9.9.1.2 |
apDiagCpuLoad15Min% of CPU load averaged over 15 mins.ro Unsigned32 .1.3.6.1.4.1.388.11.3.9.9.1.3 |
apDiagRamStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9.9.2 |
apDiagRamTotalTotal RAM available in the systemro Unsigned32 UNITS "megabytes" .1.3.6.1.4.1.388.11.3.9.9.2.1 |
apDiagRamUsedTotal RAM used in the systemro Unsigned32 UNITS "megabytes" .1.3.6.1.4.1.388.11.3.9.9.2.2 |
apDiagRamPercentageUsed% of total RAM used. Precision is to the degree of 0.1 %ro Unsigned32 .1.3.6.1.4.1.388.11.3.9.9.2.3 |
apLanStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.9.10 |
apLanInfoTableDescription. SEQUENCE OF ApLanInfoEntry .1.3.6.1.4.1.388.11.3.9.10.1 |
apLanInfoEntryDescription. ApLanInfoEntry .1.3.6.1.4.1.388.11.3.9.10.1.1 |
apLanInfoIndexDescription.ro Integer32 .1.3.6.1.4.1.388.11.3.9.10.1.1.1 |
apLanInfoEnabledIs LAN enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.10.1.1.2 |
apLanInfoIpAddressLAN ip addressro IpAddress .1.3.6.1.4.1.388.11.3.9.10.1.1.3 |
apLanInfoNetworkMaskLAN network mask.ro IpAddress .1.3.6.1.4.1.388.11.3.9.10.1.1.4 |
apLanInfoEthernetAddressDescription.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.9.10.1.1.5 |
apLanInfoSpeedLan Ethernet Port Speed.ro Unsigned32 UNITS "mbps" .1.3.6.1.4.1.388.11.3.9.10.1.1.6 |
apLanInfoDuplexModeLan ethernet port duplex mode.ro Enumeration .1.3.6.1.4.1.388.11.3.9.10.1.1.7 |
apLanRxPktsTableDescription. SEQUENCE OF ApLanRxPktsEntry .1.3.6.1.4.1.388.11.3.9.10.2 |
apLanRxPktsEntryDescription. ApLanRxPktsEntry .1.3.6.1.4.1.388.11.3.9.10.2.1 |
apLanRxPktsCount of packets received.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.2.1.1 |
apLanRxBytesCount of bytes received.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.2.1.2 |
apLanRxErrorsCount of errors received.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.2.1.3 |
apLanRxDroppedCount of received packets dropped.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.2.1.4 |
apLanRxFrameErrorsCount of received frame errors.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.2.1.5 |
apLanTxPktsTableDescription. SEQUENCE OF ApLanTxPktsEntry .1.3.6.1.4.1.388.11.3.9.10.4 |
apLanTxPktsEntryDescription. ApLanTxPktsEntry .1.3.6.1.4.1.388.11.3.9.10.4.1 |
apLanTxPktsCount of packets transmitted.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.4.1.1 |
apLanTxBytesCount of bytes transmitted.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.4.1.2 |
apLanTxErrorsCount of errors transmitted.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.4.1.3 |
apLanTxDroppedCount of transmitted packets dropped.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.4.1.4 |
apLanTxFrameErrorsCount of transmitted carrier errors.ro Counter32 .1.3.6.1.4.1.388.11.3.9.10.4.1.5 |
apMgmtAccess OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.10 |
apMgmtAccessToAllowTypes of network management access to permit.rw Bits .1.3.6.1.4.1.388.11.3.10.1 |
apTrustedHost OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.10.2 |
apTrustedHostEnableEnable trusted host feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.10.2.1 |
apTrustedHostRangeTableTable of trusted host ip ranges. SEQUENCE OF ApTrustedHostRangeEntry .1.3.6.1.4.1.388.11.3.10.2.2 |
apTrustedHostRangeEntryTrusted host ip range table entry. ApTrustedHostRangeEntry .1.3.6.1.4.1.388.11.3.10.2.2.1 |
apTrustedHostRangeIndexTrusted host ip range index.ro Integer32 .1.3.6.1.4.1.388.11.3.10.2.2.1.1 |
apTrustedHostRangeLowerIpLower bound of ip address range.rw IpAddress .1.3.6.1.4.1.388.11.3.10.2.2.1.2 |
apTrustedHostRangeUpperIpUpper bound of ip address range.rw IpAddress .1.3.6.1.4.1.388.11.3.10.2.2.1.3 |
apRouter OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.11 |
apRouterDefaultGatewayInterfaceInterface whose Default Gateway is used when both LAN and WAN are DHCP clients.rw Enumeration .1.3.6.1.4.1.388.11.3.11.1 |
apManualTime OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.12 |
apManualCurrSystemDateTimeCurrent System Time of the AP 5131.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.12.1 |
apManualTimeZoneSetting OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.12.2 |
apManualTimeZoneTableTable of all the Time Zones. SEQUENCE OF ApManualTimeZoneEntry .1.3.6.1.4.1.388.11.3.12.2.1 |
apManualTimeZoneEntry ApManualTimeZoneEntry .1.3.6.1.4.1.388.11.3.12.2.1.1 |
apManualTimeZoneIndexSimple Index.ro Integer32 .1.3.6.1.4.1.388.11.3.12.2.1.1.1 |
apManualTimeZoneNameTime Zone Name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.12.2.1.1.2 |
apManualExpectedTimeZoneExpected Time Zone to be set. This is a pointer to an entry in the apManualTimeZoneTable.rw SinglePointer .1.3.6.1.4.1.388.11.3.12.2.2 |
apManualTimeZoneSetSet the expected time zone for the system.rw DoActionNow .1.3.6.1.4.1.388.11.3.12.2.3 |
apManualDateTimeSetting OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.12.3 |
apManualExpectedYearExpected year to be SET.rw Integer32 .1.3.6.1.4.1.388.11.3.12.3.1 |
apManualExpectedMonthExpected month to be SET.rw Integer32 .1.3.6.1.4.1.388.11.3.12.3.2 |
apManualExpectedDayExpected day to be SET.rw Integer32 .1.3.6.1.4.1.388.11.3.12.3.3 |
apManualExpectedHourExpected hour to be SET.rw Integer32 .1.3.6.1.4.1.388.11.3.12.3.4 |
apManualExpectedMinutesExpected minutes to be SET.rw Integer32 .1.3.6.1.4.1.388.11.3.12.3.5 |
apManualExpectedSecondsExpected seconds to be SET.rw Integer32 .1.3.6.1.4.1.388.11.3.12.3.6 |
apManualDateTimeSetSet the expected values in System Date and Time.rw DoActionNow .1.3.6.1.4.1.388.11.3.12.3.7 |
apAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.13 |
apLoginMessage OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.13.1 |
apLoginMessageModeLogin Message Mode: Enabled/Disabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.13.1.1 |
apLoginMessageTextLogin Message Text which gets displayed at the time of login, if Login Message mode is enabled. 1-511 characters are allowed for Login Text Message. Note: Carriage Return (\0A) is not supported by SNMP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.13.1.2 |
apRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.14 |
apRadiusUsers OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.14.1 |
apRadiusUsersGroupTableDescription. SEQUENCE OF ApRadiusUsersGroupEntry .1.3.6.1.4.1.388.11.3.14.1.1 |
apRadiusUsersGroupEntryDescription. ApRadiusUsersGroupEntry .1.3.6.1.4.1.388.11.3.14.1.1.1 |
apRadiusUsersGroupDescription.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.14.1.1.1.1 |
apRadiusUsersGroupRowStatusDescription.rw AbbrevRowStatus .1.3.6.1.4.1.388.11.3.14.1.1.1.2 |
apRadiusUsersGroupIdDescription.rw Integer32 .1.3.6.1.4.1.388.11.3.14.1.1.1.3 |
apRadiusAccess OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.14.2 |
apRadiusAccessTableDescription. SEQUENCE OF ApRadiusAccessEntry .1.3.6.1.4.1.388.11.3.14.2.1 |
apRadiusAccessEntryDescription. ApRadiusAccessEntry .1.3.6.1.4.1.388.11.3.14.2.1.1 |
apRadiusAccessWlanPtrsDescription.rw Bits .1.3.6.1.4.1.388.11.3.14.2.1.1.2 |
apRadiusAccessTimeRuleDescription.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.11.3.14.2.1.1.3 |
apWips OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.15 |
apWipsPrimaryServerAddrThe IP address of the primary WIPS server. If the IP address is unknown, the value is 0.0.0.0.rw IpAddress .1.3.6.1.4.1.388.11.3.15.1 |
apWipsSecondaryServerAddrThe IP address of the secondary WIPS server. If the IP address is unknown, the value is 0.0.0.0.rw IpAddress .1.3.6.1.4.1.388.11.3.15.2 |
apPower OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.16 |
apPowerModeSet the power mode to auto(1) or 3af(2). NOTE WELL: Changing the power mode will restart the AP.rw Enumeration .1.3.6.1.4.1.388.11.3.16.1 |
apPowerDefRadioSet the default radio to radio1(1) or radio2(2). NOTE WELL: Changing the default radio will restart the AP.rw Enumeration .1.3.6.1.4.1.388.11.3.16.2 |
apPowerStatusCurrent power status - 3af(1), mid(2) or full available (3)ro Enumeration .1.3.6.1.4.1.388.11.3.16.3 |
apGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.1000 |
apGroupsV1dot0 OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.1000.1 |
dot1xGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.1 |
apRfGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.2 |
apSwitchGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.3 |
apTrapCtrlGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.4 |
apRapGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.5 |
apLoadCfgGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.6 |
apStatsGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.7 |
apNotificationsGroup Unknown .1.3.6.1.4.1.388.11.3.1000.1.8 |
apGroupsV1dot1 OBJECT IDENTIFIER .1.3.6.1.4.1.388.11.3.1000.2 |
apGroupV1dot1variablesDescription. Unknown .1.3.6.1.4.1.388.11.3.1000.2.1 |
apGroupV1dot1obsoletedDescription.obsolete Unknown .1.3.6.1.4.1.388.11.3.1000.2.2 |
apGroupV1dot1deprecatedDescription.deprecated Unknown .1.3.6.1.4.1.388.11.3.1000.2.3 |
apGroupV1dot1notificationsDescription. Unknown .1.3.6.1.4.1.388.11.3.1000.2.4 |