SYMBOL-ENTERPRISE-PRIVATE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SYMBOL-ENTERPRISE-PRIVATE-MIB.
250
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
250 total| Object Name |
|---|
symbol OBJECT IDENTIFIER .1.3.6.1.4.1.388 |
RFC1155-SMI Unknown .1.3.6.1.4.1.388 |
spectrum24 OBJECT IDENTIFIER .1.3.6.1.4.1.388.1 |
apProduct OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1 |
apRFStartUpTrapRF Driver is up.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.101 |
apACLViolationTrapMobile Unit MAC address not in the Access control
Table.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit
not in the Access Control Table. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.102 |
apAPIdConflictTrapAn Access Point with the same AP-ID with this Access
Point is found.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.103 |
apMUAssocTrapIndicates that there is one Mobile Unit associating
with this Access Point.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units associate with the
Access Point at the same time, muMacAddr
belongs to the last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.111 |
apMUUnAssocTrapIndicates that there is one Mobile Unit no longer
associating with this Access Point anymore.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units un-associate with
the Access Point at the same time, muMacAddr
belongs to the last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.112 |
apMUToCAMTrapIndicates that the Mobile Unit changes from PSP mode
to CAM mode.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units change their mode
at the same time, muMacAddr belongs to the
last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.113 |
apMUToPSPTrapIndicates that the Mobile Unit changes from CAM mode
to PSP mode.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- muMacAddr is the MAC address of the Mobile Unit.
Note : If two or more Mobile Units change their mode
at the same time, muMacAddr belongs to the
last Mobile Unit.
- apCurrentMUs is the number of Mobile Units currently
associating with this Access Point. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.114 |
apRootWLAPUpTrapIndicates that the Root AP connection is setup and
is ready to forward data.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Root AP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.121 |
apRootWLAPLostTrapIf the current wireless AP does not receive Beacon
packet from its Root AP within one second, it will
consider the Root AP is lost. The wireless AP will
eventually reset itself to re-establish the network
topology.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Root AP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.122 |
apDsgntedWLAPUpTrapIndicates that the Designated WLAP connection is setup
and is ready to forward data.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Designated
WLAP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.123 |
apDsgnatedWLAPLostTrapIf the current wireless AP does not receive Config BPDU
(Bridge Protocol Data Unit) packet from its Designated
WLAP for MAX AGE time, it will consider that the
Designated WLAP is lost.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the Designated
WLAP.
- apNbrOfWLAPItfs is the number of current WLAP
Interfaces established. TRAP-TYPE .1.3.6.1.4.1.388.1.1.0.124 |
apConfigMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.1 |
apManufactureInfo OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.1.1 |
apModelnumberThe Model Number of the Access Point device.ro DisplayString .1.3.6.1.4.1.388.1.1.1.1.1 |
apSerialnumberThe Serial Number of the Access Point system.ro DisplayString .1.3.6.1.4.1.388.1.1.1.1.2 |
apHardwareRevThe current revision of the Access Point hardware.ro DisplayString .1.3.6.1.4.1.388.1.1.1.1.3 |
apMyMacAddrThe MAC address of the AP.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.1.1.4 |
apAPFirmwareRevThe current revision of the Access Point firmware.ro DisplayString .1.3.6.1.4.1.388.1.1.1.1.5 |
apRFFirmwareRevThe current revision of the Access Point radio
firmware.ro DisplayString .1.3.6.1.4.1.388.1.1.1.1.6 |
apSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.1.2 |
apSystemNameAn ASCII string to identify this Access Point (up to
31 characters).rw DisplayString .1.3.6.1.4.1.388.1.1.1.2.1 |
apMyIPAddrThe IP address for the AP.rw IpAddress .1.3.6.1.4.1.388.1.1.1.2.2 |
apSubnetMaskThe IP subnet mask for the AP.rw IpAddress .1.3.6.1.4.1.388.1.1.1.2.3 |
apGatewayIPAddrThe IP address for the default gateway.rw IpAddress .1.3.6.1.4.1.388.1.1.1.2.4 |
apDefaultInterfaceSpecifies the default interface (Ethernet or PPP) for
the Access Point to forward an unknown packet. Default
is ethernet(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.5 |
apEnetPortStateSpecifies the state of the Ethernet interface.
Default is up(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.6 |
apEthernetTimeOutThe Ethernet time out value ranges from 30 to 255
seconds. If the value is:
- 0: the Ethernet Time Out function is disabled.
- 1: detect Ethernet timeout by hardware circuitry.
- 2: send WLAP Alive BPDU on Ethernet interface to let
other WLAP on the same Ethernet segment to detect
it's existence.
- 3: keep track of WLAP Alive BPDU on Ethernet inter-
face. If the BPDU is missing for 'WLAP Hello Time'
seconds, both Ethernet Attached and Activity LEDs
will flash and the RF interface is disabled until
the WLAP Alive BPDU is received again, then the
AP will reset itself.
When the Ethernet connection is broken:
- if WLAP Mode is disabled, the AP will clear the MU
table and disable the RF interface until the Ethernet
connection is up.
- if WLAP Mode is enabled, the AP will set the timeout
value to zero and reset itself.
The default value is 0.rw INTEGER .1.3.6.1.4.1.388.1.1.1.2.7 |
apTelnetEnableEnables/Disables Telnet access to the AP. Default is
enabled(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.8 |
apAccCtrlEnableEnables/Disables the Access Control function.
When it is enabled, a Mobile Unit can associate with
the Access Point only if its MAC address is in the
Access Control Table. Default is disabled(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.9 |
apTypeFilterEnableSpecifies the type of Access Point Type Filtering
operation, i.e. Disabled/Forward/Discard. Default is
disabled(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.10 |
apMUAutoCfgEnableEnables/Disables Autoconfiguration of Mobile Units.
When enabled, the Net ID is automatically downloaded
to Mobile Units. Default is disabled(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.11 |
apAutoCfgEnableEnables/Disables Access Point auto configuration. When
enabled, the Access Point will automatically select
unique BSSs and hopping sequences by negotiating with
one another. Default is enabled(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.12 |
apWNMPEnableEnables/Disables Use of the WNMP agent. Default is
enabled(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.13 |
apAPStateXchgEnableEnables/Disables exchanging Access Point to Access
Point state information by using WNMP protocol. Default
is enabled(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.2.14 |
apSNMPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.1.3 |
apSNMPModeSpecifies the mode of the SNMP Agent operation, i.e.
Disabled/Readonly/ReadWrite. Default is readwrite(3).rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.1 |
apROCommunityNameThe Read-Only community name of the SNMP command for
management station accessing this Access Point (up to
31 characters).rw DisplayString .1.3.6.1.4.1.388.1.1.1.3.2 |
apRWCommunityNameThe Read-Write community name of the SNMP command for
management station accessing this Access Point (up to
13 characters). This community name is same as the
System Password or Telnet Password. For security
purpose, if the management station uses the READ-ONLY
community name to access this object, a string of
'xxxxx' will be returned.rw DisplayString .1.3.6.1.4.1.388.1.1.1.3.3 |
apTrapRcvrIpAdrTrap receiver's (i.e. Network Manager's) IP address.rw IpAddress .1.3.6.1.4.1.388.1.1.1.3.4 |
apAllTrapsEnableEnables/Disables all SNMP traps. Default is disable(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.5 |
apColdBootTrapEnableEnables/Disables Access Point Cold Boot trap. Default
is disable(2). This is a generic-trap and the trap
code is 0.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.6 |
apAuthenFailureTrapEnableEnables/Disables authentication failure trap. Default
is disable(2). This is a generic-trap and the trap code
is 4.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.7 |
apRFTrapEnableEnables/Disables Access Point RF driver startup trap.
Default is disable(2). This is an enterprise-specific
trap and the trap code is 101.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.8 |
apACLTrapEnableEnables/Disables Access Control violation trap. Default
is disable(2). This is an enterprise-specific trap and
the trap code is 102.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.9 |
apMUStateChngTrapEnableEnables/Disables Mobile Unit State Change trap. Default
is disable(2). Once enabled, the following 4
enterprise- specific traps will be generated :
- MU Association Trap, the trap code is 111.
- MU Un-association Trap, the trap code is 112.
- MU To CAM Trap, the trap code is 113.
- MU To PSP Trap, the trap code is 114.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.10 |
apAPIdConflictTrapEnableEnables/Disables AP-Id conflict trap. Default is
disable(2). This is an enterprise-specific trap and the
trap code is 103.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.11 |
apWLAPConnChngTrapEnableEnables/Disables WLAP Connection Change trap. Default
is disable(2). Once enabled, the following 4
enterprise-specific traps will be generated :
- Root AP Up Trap, the trap code is 121.
- Root AP Lost Trap, the trap code is 122.
- Designated WLAP Up Trap, the trap code is 123.
- Designated WLAP Lost Trap, the trap code is 124.
The enabled/disabled state of this trap depends on the
state of apAllTrapsEnable.rw Enumeration .1.3.6.1.4.1.388.1.1.1.3.12 |
apRFConfig OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.1.4 |
apRFPortStateSpecifies the state of the RF Interface. Default is
up(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.4.1 |
apNetIdThe current Net ID (i.e. operational ESS ID) for the
AP. This value determines which APs are on the same
network and ranges from 1 - 0x1fe.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.2 |
apApIdThe current AP-ID (i.e. BSS ID) for this Access Point.
This value ranges from 0 - 0x79.
Writing a value will force this Access Point to use
that value as AP-ID, unless it conflicts with that used
by another Access Point. In that case this Access Point
will select its own value. The Access Point will always
insure that the AP-ID is unique.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.3 |
apHopSequenceThe hopping sequence defined in the system configura-
tion table for this AP. If WLAP mode is enabled, this
Access Point will follow the hopping sequence
(defined as apWLAPHopSequence) of the Root AP.
Writing a value will force this Access Point to use
that value as hopping sequence, unless it conflicts
with that used by another AP. In that case this Access
Point will select its own value. The Access Point will
always insure that the hopping sequence is unique
(given that there are fewer Access Points than the
maximum number of hopping sequences). For the United
States, this value ranges from 1-22, for Japan 0-3,
... TBD.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.4 |
apCountryNameThe country for which the Access Point radio is
configured. It is set at the factory and may not be
altered.ro DisplayString .1.3.6.1.4.1.388.1.1.1.4.5 |
apHopSetThe current hopping sequence set used by this AP.ro INTEGER .1.3.6.1.4.1.388.1.1.1.4.6 |
apAntennaSelectSelect either Primary antenna only (i.e. Disable
antenna diversity) or both Primary and Secondary
antennas (i.e. Enable antenna diversity). Default is
primary-only(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.4.7 |
apDTIMIntervalThe frequency of DTIM packets as a multiple of TIM
packets. Default is 10.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.8 |
apBCMCQMaxThe maximum size of broadcast/multicast queue.
Default is 10.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.9 |
apReassemblyTimeOutThe re-assembly timeout (in .5 ms units).
Default is 9000.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.10 |
apMaxRetriesThe maximum number of allowed retries before aborting a
transmission. Default is 15.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.11 |
apMulticastMaskRF multicast packets with these upper 32 bits are sent
out immediately.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.12 |
apEncryptCoeffThe encrytion coefficient value in hexadecimal.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.13 |
apEncryptPhaseThe encrytion phase value in hexadecimal.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.14 |
apWLAPModeEnables/Disables Wireless AP capability. Default is
disabled(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.4.15 |
apWLAPPriorityProvides a user with the influence to determine the
Root AP in wireless operation. The priority value is
added as the most significant portion of the MAC
address to form the WLAP ID. A WLAP with a lower
numerical value for priority is more likely to become
the Root AP. Default is 8000 hex from the 0 - 0xFFFF
range. Reset the Access Point for value to
take effect.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.16 |
apWLAPManualAPIDSpecifies the AP-ID of a particular WLAP and forces
the current WLAP to associate only with that WLAP.
When WLAP Manaul AP ID is set to the current AP-ID,
the current AP jumps into Functional state immediately
and waits for an Association Request from the other
WLAP. Reset AP for value to take effect.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.4.17 |
apWLAPEncryptionEnables/Disables Wireless AP encryption capability.
Default is disabled(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.4.18 |
apWLAPHelloTimeSets the time lapse, in seconds, between Configuration
BPDUs (Bridge Protocol Data Unit) generated by a Root
AP. Default is 20 seconds. Reset AP for value to take
effect.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.19 |
apWLAPMaxAgeSpecifies how long, in seconds, a Configuration BPDU
(Bridge Protocol Data Unit) is kept before it is
judged too old and discarded. Consequently, the
interface is considered to be disconnected. Default
is 100 seconds. Recommended value is multiple of the
WLAP Hello Time. Reset AP for value to take effect.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.20 |
apWLAPFwdDelaySpecifies how long, in seconds, an WLAP is prevented
from forwarding data packets to an interface.
This delay is to allow the spread of news of a topology
change to all parts of a network. Default is 10 secs.
Reset AP for value to take effect.rw INTEGER .1.3.6.1.4.1.388.1.1.1.4.21 |
apSerialPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.1.5 |
apPPPStateIndicates the current state of the PPP connection
machine. Default is down(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.5.1 |
apSerialPortUseSpecifies whether the Serial Interface is to be used
as User Interface(UI) or PPP. Default is ui(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.5.2 |
apModemConnectedSpecifies whether the Serial Interface has a modem
attached to it. Default is no(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.5.3 |
apConnectModeSpecifies the Modem connection mode:
- originate(1): AP sends dial-out information.
- answer(2): AP waits for dial-in information.
Default is answer(2).rw Enumeration .1.3.6.1.4.1.388.1.1.1.5.4 |
apDialOutNumberSpecifies the number to be dialed by the modem.rw DisplayString .1.3.6.1.4.1.388.1.1.1.5.5 |
apDialOutModeSpecifies the dialout mode:
- auto(1): Modem dial out during startup time.
- manual(2): Modem dial out by manned intervention.
Dedault is auto(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.5.6 |
apAnswerWaitTimeSpecifies the period (in seconds) the AP will wait for
the remote unit to answer the call. Default is 60 sec.rw INTEGER .1.3.6.1.4.1.388.1.1.1.5.7 |
apModemSpeakerSpecifies if modem speaker is turned on(1) or off(2).
Default is on(1).rw Enumeration .1.3.6.1.4.1.388.1.1.1.5.8 |
apInactivityTimeoutSpecifies the User Interface Inactivity timeout in
minutes. 0 means no timeout. Default is 5 minutes.rw INTEGER .1.3.6.1.4.1.388.1.1.1.5.9 |
apPPPTimeoutSpecifies the PPP event timeout in seconds. Default is
3 seconds.rw INTEGER .1.3.6.1.4.1.388.1.1.1.5.10 |
apPPPTerminatesSpecifies the maximum number of PPP terminate
requests. Default is 10.rw Counter .1.3.6.1.4.1.388.1.1.1.5.11 |
apAddrFilterTableA table of MAC addresses not allowed to associate with
the Access Point.
The maximum number of entries in the table is 128. SEQUENCE OF ApAddrFilterEntry .1.3.6.1.4.1.388.1.1.1.6 |
apAddrFilterEntryAn entry in the table of Address Filter.
A row in this table is created by setting the value of
disallowedMU to the MAC address of the MU not allowed
to associate with the Access Point.
A row in this table is deleted by setting the value of
disallowedMU to '000000000000'. ApAddrFilterEntry .1.3.6.1.4.1.388.1.1.1.6.1 |
disallowedIndexAddress Filter Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.1.6.1.1 |
disallowedMUMU MAC address which is not allowed to be associated
with this Access Point.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.1.6.1.2 |
apTypeFilterTableA table of Ethernet types (i.e. 16-bit DIX Ethernet
type), which are entered by the user and supported for
the type filtering function.
The maximum number of entries in the table is 16. SEQUENCE OF ApTypeFilterEntry .1.3.6.1.4.1.388.1.1.1.7 |
apTypeFilterEntryAn entry in the table of Type Filter.
A row in this table is created by setting the value of
etherType to Ethernet packet type in hexadecimal.
A row in this table is deleted by setting the value of
etherType to 00 ApTypeFilterEntry .1.3.6.1.4.1.388.1.1.1.7.1 |
typeIndexFilter Type Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.1.7.1.1 |
etherTypeA 16-bit Ethernet Protocol Type in hexadecimal.rw OCTET STRING .1.3.6.1.4.1.388.1.1.1.7.1.2 |
apPerformMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2 |
apTrafficMatrixTableA table of Access Point Traffic Matrix which provides
information on packets transmitted from one interface
to another (Ethernet, PPP, radio, AP). The table also
displays the number of broadcast packets transmitted
from the Access Point.
The current number of entries is 5. SEQUENCE OF ApTrafficMatrixEntry .1.3.6.1.4.1.388.1.1.2.1 |
apTrafficMatrixEntryAn entry in the table of Access Point Traffic Matrix.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApTrafficMatrixEntry .1.3.6.1.4.1.388.1.1.2.1.1 |
apTMTableIndexAccess Point Traffic Matrix Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.2.1.1.1 |
apProtoItfNameAccess Point Protocol Interface Name (i.e. Ethernet, PPP,
Radio, AP).ro DisplayString .1.3.6.1.4.1.388.1.1.2.1.1.2 |
apNPktsToEnetsIndicates the number of packets sent from the Access
Point Protocol Interface to the Ethernet Interface.
This field should always be zero if the Access Point
Protocol Interface is Ethernet.ro Counter .1.3.6.1.4.1.388.1.1.2.1.1.3 |
apNPktsToPppsIndicates the number of packets sent from the Access
Point Protocol Interface to the PPP Interface.
This field is meaningful only if the PPP interface is
enabled.ro Counter .1.3.6.1.4.1.388.1.1.2.1.1.4 |
apNPktsToRfsIndicates the number of packets sent from the Access
Point Protocol Interface to the RF Interface. If the
Access Point Protocol Interface is RF, these are
frames from one MU to another.ro Counter .1.3.6.1.4.1.388.1.1.2.1.1.5 |
apNPktsToAPStksIndicates the number of packets sent from the Access
Point Protocol Interface to the internal Access Point
stack. This field should always be zero if the Access
Point Protocol Interface is Access Point Stack.ro Counter .1.3.6.1.4.1.388.1.1.2.1.1.6 |
apItfStatTableA table of Access Point Interfaces Statistics, which
provides packets forwarding statistics for each inter-
face (Ethernet, PPP, RF, AP stack).
Interface statistics also provide performance informa-
tion for each interface in Packets-per-second (PPS) and
Bytes- per-second (BPS).
The AP interface indicates packets sent to the AP stack
(e.g. configuration requests, SNMP, Telnet etc.).
The current number of entries is 4. SEQUENCE OF ApItfStatEntry .1.3.6.1.4.1.388.1.1.2.2 |
apItfStatEntryAn entry in the table of Access Point Interface
Statistics.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApItfStatEntry .1.3.6.1.4.1.388.1.1.2.2.1 |
apItfStatIndexAccess Point Interface Statistics Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.2.2.1.1 |
apInterfaceNameAccess Point Interface Name (Ethernet, PPP, RF,
AP).ro DisplayString .1.3.6.1.4.1.388.1.1.2.2.1.2 |
apPacketsInsIndicates the number of good packets received on the
specified interface.ro Counter .1.3.6.1.4.1.388.1.1.2.2.1.3 |
apPacketsOutsIndicates the number of packets successfully
transmitted on the specified interface.ro Counter .1.3.6.1.4.1.388.1.1.2.2.1.4 |
apOctetsInsIndicates the number of good bytes received on the
specified interface.ro Counter .1.3.6.1.4.1.388.1.1.2.2.1.5 |
apOctetsOutsIndicates the number of bytes successfully transmitted
on the specified interface.ro Counter .1.3.6.1.4.1.388.1.1.2.2.1.6 |
apPktsInPerSecIndicates the number of good packets per second
received on the specified Interface.ro Gauge .1.3.6.1.4.1.388.1.1.2.2.1.7 |
apPktsOutPerSecIndicates the number of packets per second successfully
transmitted on the specified interface.ro Gauge .1.3.6.1.4.1.388.1.1.2.2.1.8 |
apOctInPerSecIndicates the number of good bytes per second
received on the specified Interface.ro Gauge .1.3.6.1.4.1.388.1.1.2.2.1.9 |
apOctOutPerSecIndicates the number of bytes per second successfully
transmitted on the specified interface.ro Gauge .1.3.6.1.4.1.388.1.1.2.2.1.10 |
apEthernetStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.3 |
apEPktsSeensIndicates the number of packets that have been seen on
the Ethernet interface. Most of these packets are for
stations other than those associated with this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.3.1 |
apEPktsForwardedsIndicates the number of Ethernet packets forwarded
from the Ethernet interface to other interfaces.ro Counter .1.3.6.1.4.1.388.1.1.2.3.2 |
apEPktsDiscNoMatchsIndicates the number of packets discarded due to
unknown destination (i.e. no database entry).ro Counter .1.3.6.1.4.1.388.1.1.2.3.3 |
apEPktsDiscForcedsIndicates the number of packets discarded due to Type
or Address filters applied.ro Counter .1.3.6.1.4.1.388.1.1.2.3.4 |
apEPktsDiscBuffersIndicates the number of packets discarded due to lack
of available buffers in AP.ro Counter .1.3.6.1.4.1.388.1.1.2.3.5 |
apEPktsDiscCRCsIndicates the number of packets discarded due to CRC
errors.ro Counter .1.3.6.1.4.1.388.1.1.2.3.6 |
apEPktsSentsIndicates the number of packets sent by this Ethernet
Port.ro Counter .1.3.6.1.4.1.388.1.1.2.3.7 |
apEAnyCollisionsIndicates the number of packets that suffer at least
one collision.ro Counter .1.3.6.1.4.1.388.1.1.2.3.8 |
apE1orMoreCollsIndicates the number of packets that suffer more than
one collision.ro Counter .1.3.6.1.4.1.388.1.1.2.3.9 |
apEMaxCollisionsIndicates the number of packets that suffer more than
the maximum number of collisions.ro Counter .1.3.6.1.4.1.388.1.1.2.3.10 |
apELateCollisionsIndicates the number of packets that suffer late
collisions.ro Counter .1.3.6.1.4.1.388.1.1.2.3.11 |
apEPktsDefersIndicates the times AP had to defer transmit requests
on Ethernet due to busy medium.ro Counter .1.3.6.1.4.1.388.1.1.2.3.12 |
apRFStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.4 |
rfBcMcPktsSentsIndicates the number of broadcast/multicast packets
that have been successfully transmitted.ro Counter .1.3.6.1.4.1.388.1.1.2.4.1 |
rfBcMcPktsRcvdsIndicates the number of broadcast/multicast packets
that have been successfully received.ro Counter .1.3.6.1.4.1.388.1.1.2.4.2 |
rfBcMcOctSentsIndicates the number of broadcast/multicast bytes that
have been successfully transmitted.ro Counter .1.3.6.1.4.1.388.1.1.2.4.3 |
rfBcMcOctRcvdsIndicates the number of broadcast/multicast bytes that
have been successfully received.ro Counter .1.3.6.1.4.1.388.1.1.2.4.4 |
rfSysPktsSentsIndicates the number of system packets (includes probe
operations packets) that have been successfully
transmitted.ro Counter .1.3.6.1.4.1.388.1.1.2.4.5 |
rfSysPktsRcvdsIndicates the number of system packets (includes probes
/associate packets) that have been successfully
received.ro Counter .1.3.6.1.4.1.388.1.1.2.4.6 |
rfSBcMcPktsSentsIndicates the number of system broadcast/multicast
packets (includes beacons) that have been successfully
transmitted.ro Counter .1.3.6.1.4.1.388.1.1.2.4.7 |
rfSBcMcPktsRcvdsIndicates the number of system broadcast/multicast
iincludes beacons) packets that have been successfully
received.ro Counter .1.3.6.1.4.1.388.1.1.2.4.8 |
rfSuccFragPktsIndicates the number of packets that were fragmented
and for which all fragments were acked.ro Counter .1.3.6.1.4.1.388.1.1.2.4.9 |
rfUnsuccFragPktsIndicates the number of packets that were fragmented
but for which one or more fragments were not acked.ro Counter .1.3.6.1.4.1.388.1.1.2.4.10 |
rfTotalFragSentsIndicates the number of packets fragments that have
been sent.ro Counter .1.3.6.1.4.1.388.1.1.2.4.11 |
rfTotalFragRcvdsIndicates the number of packets fragments that have
been received.ro Counter .1.3.6.1.4.1.388.1.1.2.4.12 |
rfSuccReassPktsIndicates the number of packets that were reassigned
and successfully reassembled.ro Counter .1.3.6.1.4.1.388.1.1.2.4.13 |
rfUnsuccReassPktsIndicates the number of packets that were
unsuccessfully reassembled.ro Counter .1.3.6.1.4.1.388.1.1.2.4.14 |
rfAssocMUsIndicates the number of MUs currently associated with
this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.4.15 |
rfRcvdCRCErrorsIndicates the number of packets that were received but
had the CRC errors.ro Counter .1.3.6.1.4.1.388.1.1.2.4.16 |
rfRcvdDupPktsIndicates the number of packets that were received but
were duplicates of previously received. This is usually
an indication that an ACK was not received by the
sending unit.ro Counter .1.3.6.1.4.1.388.1.1.2.4.17 |
rfTotalCollisionsIndicates the number of collisions that have occured on
the interface. A collision on the RF interface means
that an ack was not received or that a RTS was not
answered by a CTS.ro Counter .1.3.6.1.4.1.388.1.1.2.4.18 |
rfPktsWithoutCollsIndicates the number of packets without any collision.ro Counter .1.3.6.1.4.1.388.1.1.2.4.19 |
rfPktsWithMaxCollsIndicates the number of packets that suffered the
maximum number of collisions.ro Counter .1.3.6.1.4.1.388.1.1.2.4.20 |
rfPktsWithCollsIndicates the number of packets that suffered at least
one collision.ro Counter .1.3.6.1.4.1.388.1.1.2.4.21 |
apPerFreqStatTableA table of Radio Per Frequency statistics, which is
based on the historical frequency records used by this
Access Point.
The current number of entries is 78. SEQUENCE OF ApPerFreqStatEntry .1.3.6.1.4.1.388.1.1.2.5 |
apPerFreqStatEntryAn entry in the table of Radio per frequency
statistics.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApPerFreqStatEntry .1.3.6.1.4.1.388.1.1.2.5.1 |
rfPerFqChannelRadio Frequency channel number.ro INTEGER .1.3.6.1.4.1.388.1.1.2.5.1.1 |
rfPerFqPktsSentsCounter for the packets sent per frequency.ro Counter .1.3.6.1.4.1.388.1.1.2.5.1.2 |
rfPerFqPktsRcvdsCounter for the packets received per frequency.ro Counter .1.3.6.1.4.1.388.1.1.2.5.1.3 |
rfPerFqRetriesCounter for the retries per frequency.ro Counter .1.3.6.1.4.1.388.1.1.2.5.1.4 |
apSerialPortStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.6 |
apNbrOfDialoutsIndicates the number of dialout attempts by the AP.ro Counter .1.3.6.1.4.1.388.1.1.2.6.1 |
apDialoutFailuresIndicates the number of dialout failures by the AP.ro Counter .1.3.6.1.4.1.388.1.1.2.6.2 |
apNbrOfAnswersIndicates the number of answer attempts by the AP.ro Counter .1.3.6.1.4.1.388.1.1.2.6.3 |
apCurrCallTimeIndicates the length in seconds of current connection
session. Note: the time is relative to the boot time
of this AP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.6.4 |
apLastCallTimeIndicates the length in seconds of last connection
session. Note: the time is relative to the boot time
of this AP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.6.5 |
apWNMPStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.7 |
apWNMPCfgPktsIndicates the number of WNMP configuration requests
received from NetVision.ro Counter .1.3.6.1.4.1.388.1.1.2.7.1 |
wEchoRequestsIndicates the number of WNMP Echo Requests received
by this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.7.2 |
wPingRequestsIndicates the number of WNMP ping requests received by
this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.7.3 |
wPktsFromNVsIndicates the number of WNMP packets that were received
from NetVision via this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.7.4 |
wPPktsToNVsIndicates the number of WNMP packets that were sent to
the NetVision via this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.7.5 |
wPassThruEchoesIndicates the number of WNMP packets for other stations
that passed through this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.7.6 |
apMUInfo OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.8 |
apCurrentMUsIndicates the number of MUs currently associated with
this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.8.1 |
apMaxMUsIndicates the highest number of MUs ever associated
with this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.8.2 |
apTotalAssocsIndicates the total number of associations by all MUs
with this AP.ro Counter .1.3.6.1.4.1.388.1.1.2.8.3 |
apMUTableA table of information for a specific MU associated
with this Access Point.
The current number of entries is 128. SEQUENCE OF ApMUEntry .1.3.6.1.4.1.388.1.1.2.8.4 |
apMUEntryAn entry in the table of information for a specific MU
associated with this Access Point.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApMUEntry .1.3.6.1.4.1.388.1.1.2.8.4.1 |
muIndexSpecific MU information Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.2.8.4.1.1 |
muMacAddrThe MAC address of the MU associated with this AP.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.2.8.4.1.2 |
muInterfaceIndicates the interface on which this MU is located.
Note: The AP may learn of an MU via the RF network
or from the wired networks such as Ethernet or PPP.
In this release, the AP does not keep track of those
MUs reachable via the Ethernet, but that will change
in future releases.ro Enumeration .1.3.6.1.4.1.388.1.1.2.8.4.1.3 |
muStateIndicates the state of this MU.ro Enumeration .1.3.6.1.4.1.388.1.1.2.8.4.1.4 |
muPowerModeIndicates the MU power mode (Power Save Protocol mode
or Continue Active Mode.)ro Enumeration .1.3.6.1.4.1.388.1.1.2.8.4.1.5 |
muStationIDIndicates the MU station ID.ro INTEGER .1.3.6.1.4.1.388.1.1.2.8.4.1.6 |
muLastAPAddrIndicates the MAC address of the last AP with which
this MU had an association.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.2.8.4.1.7 |
muTotalAssocIndicates the total associations for this MU.ro INTEGER .1.3.6.1.4.1.388.1.1.2.8.4.1.8 |
muAssocStartIndicates when the MU began its current association
with this AP.
Note: Time is represented in seconds and the time
is relative to the boot time of this AP.
This is also true for all the association objects
listed below.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.8.4.1.9 |
muLstAssStrtIndicates when the MU began its prior association
with this AP.
If this is the first association with this AP, this
value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.8.4.1.10 |
muLastAssEndIndicates when the MU ended its previous association
with this AP.
If this is the first association with this AP, this
value is zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.8.4.1.11 |
muNPktsSentsIndicates the number of packets successfully
transmitted to this MU.ro Counter .1.3.6.1.4.1.388.1.1.2.8.4.1.12 |
muNPktsRcvdsIndicates the number of Good Packets received from this
MU.ro Counter .1.3.6.1.4.1.388.1.1.2.8.4.1.13 |
muNBytesSentsIndicates the number of bytes successfully transmitted
to this MU.ro Counter .1.3.6.1.4.1.388.1.1.2.8.4.1.14 |
muNBytesRcvdsIndicates the number of Good Bytes received from this
MU.ro Counter .1.3.6.1.4.1.388.1.1.2.8.4.1.15 |
muNDiscdPktsIndicates the number of received packets discarded
because no buffers.ro Counter .1.3.6.1.4.1.388.1.1.2.8.4.1.16 |
muTmLastDataIndicates the time when the last good packet was
received from this MU.
The packet may be either an ACK, Data, or Poll.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.8.4.1.17 |
apKnownAPsTableA table of information on other Access Points known by
this Access Point.
The current number of entries is 32. SEQUENCE OF ApKnownAPsEntry .1.3.6.1.4.1.388.1.1.2.9 |
apKnownAPsEntryAn entry in the table of information on the Known
Access Points.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApKnownAPsEntry .1.3.6.1.4.1.388.1.1.2.9.1 |
apAPMacAddrMac Address of Known AP.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.2.9.1.1 |
apAPIpAddrIP Address of Known AP.ro IpAddress .1.3.6.1.4.1.388.1.1.2.9.1.2 |
apNetIDNetwork ID (i.e. ESS ID) of the Known AP in
hexadecimal.ro OCTET STRING .1.3.6.1.4.1.388.1.1.2.9.1.3 |
apAPIDAP ID (i.e. BSS ID) of the Known AP in hexadecimal.ro OCTET STRING .1.3.6.1.4.1.388.1.1.2.9.1.4 |
apHoppingSeqHopping Sequence of Known AP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.9.1.5 |
apMUsIndicates the number of MUs currently associated with AP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.9.1.6 |
apKBOSKilobytes sent per second by AP on the radio interface.ro INTEGER .1.3.6.1.4.1.388.1.1.2.9.1.7 |
apKBISKilobytes received per second by AP on the radio
interface.ro INTEGER .1.3.6.1.4.1.388.1.1.2.9.1.8 |
apLastRcvdLast communication in seconds with AP. Consistent values
greater than 12 may indicate a communication failure with
AP.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.1.1.2.9.1.9 |
apFilterStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.10 |
apAdrViolationsIndicates the number of Mobile Unit MAC address
violations counted.ro Counter .1.3.6.1.4.1.388.1.1.2.10.1 |
apTypeViolationsIndicates the number of Ethernet packet type violations
counted.ro Counter .1.3.6.1.4.1.388.1.1.2.10.2 |
apWLAPInfo OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.2.11 |
apNbrOfWLAPItfsIndicates number of WLAP interfaces established.ro Counter .1.3.6.1.4.1.388.1.1.2.11.1 |
apWLAPStateIndicates the current WLAP state. The state values and
meanings are as follows :
- During power-up initialization :
Initializing(1)
SendingProbe(2)
SendAssocReq(3)
SendCfgBPDU(4)
WaitForProbe(5)
SendProbeRsp(6)
SendAssocRsp(7)
SendCfgRsp(8)
ReceivedRootRsp(10)
- During WLAP operation :
RootWLAPLost(12)
Disabled(14)
Functional(15)ro Enumeration .1.3.6.1.4.1.388.1.1.2.11.2 |
apWLAPHopSequenceIndicates the hop sequence of the Root AP followed by
this WLAP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.11.3 |
apRootInterfaceIndicates the WLAP interface leading to the Root AP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.11.4 |
apRootWLAPIDIndicates the WLAP ID of the Root AP. It consists of
2 bytes of priority (default is 0x8000) and 6 bytes of
MAC address of the Root APro OCTET STRING .1.3.6.1.4.1.388.1.1.2.11.5 |
apRootPathCostIndicates how many hops away the current WLAP is from
the Root AP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.11.6 |
apWLAPIDIndicates the WLAP ID of the current WLAP. It consists
of 2 bytes of priority (default is 0x8000) and 6 bytes
MAC address of the current WLAPro OCTET STRING .1.3.6.1.4.1.388.1.1.2.11.7 |
apWLAPItfTableA table of wireless AP interfaces information, which
contains four (4) interfaces : Ethernet and three
AP-to-AP interfaces or just all four AP-to-AP
interfaces.
The current number of entries is 4. SEQUENCE OF ApWLAPItfEntry .1.3.6.1.4.1.388.1.1.2.11.8 |
apWLAPItfEntryAn entry in the table of wireless AP interfaces
information.
A row in this table cannot be created or deleted by
SNMP operations on columns of the table. ApWLAPItfEntry .1.3.6.1.4.1.388.1.1.2.11.8.1 |
apWLAPItfIDWLAP interface ID. It consists of 1 byte of priority
(default is 0x80) and 1 byte of interface ID.ro OCTET STRING .1.3.6.1.4.1.388.1.1.2.11.8.1.1 |
apWLAPItfAddrThe MAC address of the associated WLAP on this
interface.
For Ethernet, this is the Bridge Group Address :
01-80-C2-00-00-00.
For AP-to-AP, this is the associated WLAP MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.2.11.8.1.2 |
apWLAPItfStateThe current state of the Wireless AP interface, ie :
Disabled(1), Listening(2), Learning(3), Forwarding(4), or
Blocking(5).ro Enumeration .1.3.6.1.4.1.388.1.1.2.11.8.1.3 |
apWLAPPathCostThe cost to be added to the root path cost field in the
config BPDU (Bridge Protocol Data Unit) received on this
interface in order to determine the cost of the path to
the Root AP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.11.8.1.4 |
apDsgnatedRootThe unique Root AP ID designated by the Root AP.ro OCTET STRING .1.3.6.1.4.1.388.1.1.2.11.8.1.5 |
apDsgnatedCostThe cost of the path to the Root AP designated by the
Root AP.ro INTEGER .1.3.6.1.4.1.388.1.1.2.11.8.1.6 |
apDsgnatedWLAPThe unique WLAP ID designated by the Root AP.ro OCTET STRING .1.3.6.1.4.1.388.1.1.2.11.8.1.7 |
apDsgnatedItfThe WLAP interface ID designated by the Root AP.ro OCTET STRING .1.3.6.1.4.1.388.1.1.2.11.8.1.8 |
apFaultMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.3 |
apClrAllStatisticsClear all the interface statistics (yes = 1, no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.1 |
apClrMUTableClear the MU Table (yes = 1, no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.2 |
apClrACLClear the Access Control Table (yes = 1, no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.3 |
apClrACLRangeTableClear the Access Control Range Table (yes = 1, no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.4 |
apClrAddrFilterTblClear the Address Filtering Table (yes = 1, no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.5 |
apLdACLFrMUListLoad the Access Control Table from MU Table (yes = 1,
no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.6 |
apModemDialOutCommands the modem to dialout (yes = 1, no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.3.7 |
apModemHangUpForces the AP to issue a 'hangup' string to the modem
attached to the serial port (yes = 1, no = 2).
This command is meaningful only if the AP is configured
for a modem connection on the serial port. If there is
no modem or there is no connection, the command will be
ignored.rw Enumeration .1.3.6.1.4.1.388.1.1.3.8 |
apUpdateFirmwareUpdate the AP firmware through TFTP server. The AP
firmware will be saved in NVRAM (yes = 1, no = 2).
Before issuing this command, set 'apDnLdFileName',
and 'apTFTPServer' to the proper valuesrw Enumeration .1.3.6.1.4.1.388.1.1.3.9 |
apDnLdFileNameThe name of the file to be downloaded to the AP.
(Including path name and total up to 49 characters.)
Note: IF BOOTP is responded to, that name will take
precedence and overwrite this name.rw DisplayString .1.3.6.1.4.1.388.1.1.3.10 |
apTFTPServerThe IP address for the TFTP Server.rw IpAddress .1.3.6.1.4.1.388.1.1.3.11 |
apResetAPForces a reset of the AP (yes = 1, no = 2).
Upon reset, the AP clears all the statistics and
restores the last saved configuration information. If
changes are made without being saved, the AP clears
those changes upon reset.rw Enumeration .1.3.6.1.4.1.388.1.1.3.12 |
apSecurityMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.388.1.1.4 |
apACLViolationsIndicates the number of Access Control violations
occurred.ro Counter .1.3.6.1.4.1.388.1.1.4.1 |
apSaveConfigSaves the current configuration to NVRAM (yes = 1,
no = 2).rw Enumeration .1.3.6.1.4.1.388.1.1.4.2 |
apAccCtrlTableA table of MAC addresses allowed to associate with the
Access Point.
The maximum number of entries in the table is 128. SEQUENCE OF ApAccCtrlEntry .1.3.6.1.4.1.388.1.1.4.3 |
apAccCtrlEntryAn entry in the table of MAC address Access Control.
A row in this table is created by setting the value of
allowedMU to the MAC address of the MU allowed to
associate with this Access Point.
A row in this table is deleted by setting the value of
allowedMU to '000000000000'. ApAccCtrlEntry .1.3.6.1.4.1.388.1.1.4.3.1 |
allowedIndexAccess Control Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.4.3.1.1 |
allowedMUMU MAC address which is allowed to associate with
this AP.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.4.3.1.2 |
apACLRangeTableA table of Access Control Range, which consists of
eight (8) pairs of low and high MAC addresses.
Any Mobile Unit with the MAC address within the range
is allowed to associate with the Access Point.
The maximum number of entries in the table is 8. SEQUENCE OF ApACLRangeEntry .1.3.6.1.4.1.388.1.1.4.4 |
apACLRangeEntryAn entry in the table of MAC address Access Control
Range.
A row in this table is created by first setting the
value of lowMacAddr to the lowest MAC address and then
the value of highMacAddr to the highest MAC address of
a group of Mobile Units allowed to associate with this
Access Point. This sequence of setting is very
important, otherwise a wrong result will occur.
A row in this table is deleted by setting the value of
either lowMacAddr or highMacAddr to '000000000000'. ApACLRangeEntry .1.3.6.1.4.1.388.1.1.4.4.1 |
apACLRangeIndexAccess Control Range Table index.ro INTEGER .1.3.6.1.4.1.388.1.1.4.4.1.1 |
lowMacAddrThe lowest Mobile Unit MAC address in the range which
is allowed to be associated with this AP.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.4.4.1.2 |
highMacAddrThe highest Mobile Unit MAC address in the range which
is allowed to be associated with this AP.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.1.1.4.4.1.3 |
coldStartAccess Point cold boot.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message. TRAP-TYPE .1.3.6.1.4.1.3320.9.225.0.0 |
authenticationFailureInvalid SNMP Community string.
- apMyMacAddr is the MAC address of the Access Point
sending this trap message.
- apAPMacAddr is the MAC address of the remote host
sending SNMP packet with invalid community. TRAP-TYPE .1.3.6.1.4.1.3320.9.225.0.4 |