WS-CC-RF-MIB
Mib for wireless features
Main OID:
wsCcRfMIB.1.3.6.1.4.1.388.14.3.2.1
817
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
817 total| Object Name |
|---|
wsCcRfMIBMib for wireless features MODULE-IDENTITY .1.3.6.1.4.1.388.14.3.2.1 |
wsCcRfCountryCodeThis value is a two-character representation of the country code. Note: when changing this _CountrySelection, the current channel and power levels are NOT changed. The prior settings for these values may or may not be valid/legal for the new country selected. It is up to the network management software to ensure that channel and/or power settings are changed BEFORE changing the country selection so that no such invalid/illegal state is reached, even for a short interim. country code: Argentina: ar Australia: au Austria: at Bahrain: bh Belarus: by Belgium: be Brazil: br Bulgaria: bg Canada: ca Chile: cl China: cn Colombia: co Costa Rica: cr Croatia: hr Czech Republic: cz Denmark: dk Ecuador: ec Egypt: eg Estonia: ee Finland: fi France: fr Germany: de Greece: gr Hong Kong: hk Hungary: hu Iceland: is India: in Indonesia: id Ireland: ie Israel: il Italy: it Japan(J52): jj Japan(W52/W53): jw Jordan: jo Kazakhstan: kz Kuwait: kw Latvia: lv Liechtenstein: li Lithuania: lt Luxembourg: lu Malaysia: my Mexico: mx Morocco: ma Netherlands: nl New Zealand: nz Norway: no Oman: om Peru: pe Philippines: ph Poland: pl Portugal: pt Qatar: qa Romania: ro Russia: ru Saudi Arabia: sa Singapore: sg Slovak Republic: sk Slovenia: si South Africa: za South Korea: kr Spain: es Sri Lanka: lk Sweden: se Switzerland: ch Taiwan: tw Thailand: th Turkey: tr Ukraine: ua United Arab Emirates: ae United Kingdom: uk United States: us Uruguay: uy Venezuela: ve Vietnam: vnrw DisplayString .1.3.6.1.4.1.388.14.3.2.1.1 |
wsCcRfSnmpSetDelayNOT Implemented in this release: this would cause any configuration change to be held in a cache until this variable is toggled again. It will be useful if we need to apply some changes in a batch-mode.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.2 |
wsCcRfClusterIndexThe cluster index of the switch.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.3 |
wsCcRfProxyRespMuArpReqCauses the switch to respond to an ARP Request on behalf of an MU. Since a lot of traffic is ARP, this helps to save battery life on the MUs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.4 |
wsCcRfOversizedFrameEnableEnable over-sized frame.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.5 |
wsCcRfWlanPriorityEnableUse wlan priority weights to determine packet queueing order.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.6 |
wsCcRfAdvancedConfigEnableEnable or disable Advanced-Config functionality on the switch. Disabling of Advanced-Config will fail when the current setting is not compatible with Auto-Config rules. If user wishes to force the disable action, he/she should use the forcedFalse option instead. Note: After setting with forcedFalse, the object will return false(2) on a snmp-get.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.7 |
wsCcRfLastErrorError string of the last failed attempt snmp setro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.8 |
wsCcRfAp OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.9 |
wsCcRfApCountNumber of Acess Ports adoptedro Integer32 .1.3.6.1.4.1.388.14.3.2.1.9.1 |
wsCcRfApTableThis table lists all Access Ports that contain at least one radio that has been adopted by this wireless switch SEQUENCE OF WsCcRfApEntry .1.3.6.1.4.1.388.14.3.2.1.9.2 |
wsCcRfApEntry WsCcRfApEntry .1.3.6.1.4.1.388.14.3.2.1.9.2.1 |
wsCcRfApIndexSmall, arbitrary integer index.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.9.2.1.1 |
wsCcRfApNicMacMAC address of this Access Port.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.2 |
wsCcRfApModelNumberModel number of the Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.3 |
wsCcRfApSerialNumberSerial Number of this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.4 |
wsCcRfApPcbRevisionRevision of the printed circuit board for this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.5 |
wsCcRfApBootLoaderRevRevision of the boot loader code in this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.6 |
wsCcRfApWispVersionVersion of the WISP (AP-switch) protocol implemented by this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.7 |
wsCcRfApRuntimeFwVersionVersion of run-time code on this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.2.1.8 |
wsCcRfApNumRadiosThe number of radios implemented on this Access Port.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.9.2.1.9 |
wsCcRfApRadio1Index of the first radio. 0 will be returned if the radio is not adopted.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.9.2.1.10 |
wsCcRfApRadio2Index of the second radio. 0 will be returned if the radio is not adopted.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.9.2.1.11 |
wsCcRfApAddressThe IP address of the L3 AP. This field is empty for L2 AP.ro IpAddress .1.3.6.1.4.1.388.14.3.2.1.9.2.1.12 |
wsCcRfApVoiceDelayDelay to AP (round trip delay / 2) for voice packets in ms. A value of 0 for this object implies that round trip delay is unavailable.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.388.14.3.2.1.9.2.1.13 |
wsCcRfApImageVersionTableTable displaying Access Ports image version info. SEQUENCE OF WsCcRfApImageVersionEntry .1.3.6.1.4.1.388.14.3.2.1.9.3 |
wsCcRfApImageVersionEntry WsCcRfApImageVersionEntry .1.3.6.1.4.1.388.14.3.2.1.9.3.1 |
wsCcRfApImageVersionIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.9.3.1.1 |
wsCcRfApImageVersionApTypeAp type that the image applies to.ro ApType .1.3.6.1.4.1.388.14.3.2.1.9.3.1.2 |
wsCcRfApImageVersionModelModel string of the Access Port image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.3.1.3 |
wsCcRfApImageVersionNameVersion name of the Access Port image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.3.1.4 |
wsCcRfApImageVersionReleaseDateRelease date of the Access Port image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.3.1.5 |
wsCcRfApImageVersionImageSizeSize in bytes of the Access Port image.ro Integer32 UNITS "byte" .1.3.6.1.4.1.388.14.3.2.1.9.3.1.6 |
wsCcRfApUnadoptedTableTable of detected but unadopted access ports. SEQUENCE OF WsCcRfApUnadoptedEntry .1.3.6.1.4.1.388.14.3.2.1.9.4 |
wsCcRfApUnadoptedEntry WsCcRfApUnadoptedEntry .1.3.6.1.4.1.388.14.3.2.1.9.4.1 |
wsCcRfApUnadoptedIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.9.4.1.1 |
wsCcRfApUnadoptedMacMac address of detected but unadopted AP.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.4.1.2 |
wsCcRfApUnadoptedApTypeAp type of detected but unadopted access port.ro ApType .1.3.6.1.4.1.388.14.3.2.1.9.4.1.3 |
wsCcRfApUnadoptedLastSeenThe unadopted-ap was last seen wsCcRfApUnadoptedLastSeen seconds ago.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.9.4.1.4 |
wsCcRfApHistoryTableDescription. SEQUENCE OF WsCcRfApHistoryEntry .1.3.6.1.4.1.388.14.3.2.1.9.5 |
wsCcRfApHistoryEntryDescription. WsCcRfApHistoryEntry .1.3.6.1.4.1.388.14.3.2.1.9.5.1 |
wsCcRfApHistoryIndexSimple Indexro INTEGER .1.3.6.1.4.1.388.14.3.2.1.9.5.1.1 |
wsCcRfApHistoryMacMAC Address of the APro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.5.1.2 |
wsCcRfApHistoryRadioTypeRadio Type: 11a, 11b, 11g, 11an, 11bgn or N/Aro Enumeration .1.3.6.1.4.1.388.14.3.2.1.9.5.1.3 |
wsCcRfApHistoryTimestampDate and Timero DisplayString .1.3.6.1.4.1.388.14.3.2.1.9.5.1.4 |
wsCcRfApHistoryEventAdoption/unadoption/self-healing eventro Enumeration .1.3.6.1.4.1.388.14.3.2.1.9.5.1.5 |
wsCcRfApHistoryReasonAP History reason for occurence of eventro DisplayString .1.3.6.1.4.1.388.14.3.2.1.9.5.1.6 |
wsCcRfApHistoryEnableEnable / disable AP history data collectionrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.9.6 |
wsCcRfApHistoryClearClears the entries in the AP History table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.7 |
wsCcRfApAapVersionTableA table of the supported AAP firmware versions. SEQUENCE OF WsCcRfApAapVersionEntry .1.3.6.1.4.1.388.14.3.2.1.9.8 |
wsCcRfApAapVersionEntryEntry in AAP firmware version table. WsCcRfApAapVersionEntry .1.3.6.1.4.1.388.14.3.2.1.9.8.1 |
wsCcRfApAapVersionTypeAAP Typero Enumeration .1.3.6.1.4.1.388.14.3.2.1.9.8.1.1 |
wsCcRfApAapVersionStringAAP minimum firmware version required. The string should be of the format is X.X.X.X-XXXR.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.9.8.1.2 |
wsCcRfApImgUploadTableTable to upload new AP images. SEQUENCE OF WsCcRfApImgUploadEntry .1.3.6.1.4.1.388.14.3.2.1.9.9 |
wsCcRfApImgUploadEntryAn entry in the table. WsCcRfApImgUploadEntry .1.3.6.1.4.1.388.14.3.2.1.9.9.1 |
wsCcRfApImgUploadImgTypeImage type.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.9.9.1.1 |
wsCcRfApImgUploadFileImage file path. It can be specified as one of the following: flash:/path/file cf:/path/file usb1:/path/file usb2:/path/filerw DisplayString .1.3.6.1.4.1.388.14.3.2.1.9.9.1.2 |
wsCcRfApImgUploadRowStatusThe Row status. All columns must be supplied to create a row. Row creation uploads the file to the Switch. If upload fails, row creation will fail and wsCcRfApImgUploadLastFailedReason will have the reason. Row deletion restores the original AP Image. In case AAP, the image is not uploaded to the switch. AAP image update will fetch the image from the specified location.rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.9.9.1.3 |
wsCcRfApImgUploadLastFailedReasonLast image upload failed reason.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.10 |
wsCcRfApAapImg OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.9.11 |
wsCcRfApAapImgEnableAutoUpdEnable or disable automatic image update of AAP. The value of this object can be set to 'true' even if no images have previously been configured in wsCcRfApImgUploadTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.11.1 |
wsCcRfApAapImgUpd OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.9.11.2 |
wsCcRfApAapImgUpdMacMAC address of the AAP.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.11.2.1 |
wsCcRfApAapImgUpdStartImage update start. Setting this value to 2 means starting image update. The following must be configured before setting this value to 2: - wsCcRfApAapImgUpdMac contains the MAC address of the AAP and the AAP must be adopted. - wsCcRfApImgUploadTable contains the AAP image name. If image update fails, wsCcRfApAapImgUpdLastFailedReason will have the reason. If there is no image update, its value will be set to 1.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.9.11.2.2 |
wsCcRfApAapImgUpdLastFailedReasonLast image update failed reason.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.9.11.2.3 |
wsCcRfRadio OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.11 |
wsCcRfRadioAutoAdoptEnable or disable the switch to auto-adopt radios.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.1 |
wsCcRfRadioCntNumber of radios adopted by the switch. This is a count of the number of rows in wsCcRfRadioStatusTablero Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.2 |
wsCcRfRadioLastMacThis scalar records the MAC address of the most recent radio to be Adopted, UnAdopted, or Denied.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.3 |
wsCcRfRadioLastReasonThis value notes the reason for the most-recent radio UnAdoption or Denial.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.4 |
wsCcRfRadioTableThis table lists all radios adopted by this wireless switch. SEQUENCE OF WsCcRfRadioEntry .1.3.6.1.4.1.388.14.3.2.1.11.5 |
wsCcRfRadioEntry WsCcRfRadioEntry .1.3.6.1.4.1.388.14.3.2.1.11.5.1 |
wsCcRfRadioIndexSmall, arbitrary integer index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.1 |
wsCcRfRadioApMacMAC address of the Access Port that this radio resides within.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.2 |
wsCcRfRadioDescrDescription of the radio.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.3 |
wsCcRfRadioTypeRadio model. Changing this value will result in all parameters getting defaulted for this radio.rw RadioType .1.3.6.1.4.1.388.14.3.2.1.11.5.1.4 |
wsCcRfRadioApTypeModel of the Access Port this radio resides in.rw ApType .1.3.6.1.4.1.388.14.3.2.1.11.5.1.5 |
wsCcRfRadioBssWlanMapThe mapping of WLANs to BSSIDs. Each radio supports 4 BSSIDs and 16 WLANs. The user can map any number of WLANs to each of the BSSIDs. Each BSSID forms a virtual ap.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.11.5.1.6 |
wsCcRfRadioAntDiversityThe antenna diversity setting for the Access Port. Options for 11n radio: - Valid options are primaryOnly and mimo - Default option is mimo - For single antenna operation set mode to primaryOnlyrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.5.1.7 |
wsCcRfRadioShortPreambleEnable support for Short Preamble when MUs associate with the Access Port. Enabling Short Preamble may cause incompatibility with some older clients. Applies only to b/g radios.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.8 |
wsCcRfRadioRtsThreshThe Request To Send(RTS) threshold(in bytes) for use by this radio.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.9 |
wsCcRfRadioBeaconIntSpecify a beacon interval in units of 1,000 microseconds (K-us). This is a multiple of the DTIM (wsCcRfRadioDtimPrd) value, for example, 100 : 10.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.10 |
wsCcRfRadioDtimPrdSpecify a period for the Delivery Traffic Indication Message (DTIM). This is a divisor of the beacon interval (in milliseconds), for example, 10 : 100.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.11 |
wsCcRfRadioBasicRatesList of basic rates for the radio.rw TransmitRate .1.3.6.1.4.1.388.14.3.2.1.11.5.1.12 |
wsCcRfRadioSupportedRatesList of supported rates for the radio.rw TransmitRate .1.3.6.1.4.1.388.14.3.2.1.11.5.1.13 |
wsCcRfRadioRapDetectorIf this radio is a Rogue AP detector.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.14 |
wsCcRfRadioClusterIndexThe preferred group of Clusterrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.15 |
wsCcRfRadioMaxMuMax number of Mu a radio can associate.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.16 |
wsCcRfRadioSelfHealingActionAction taken by this radio when neighbor radios go downrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.5.1.17 |
wsCcRfRadioSelfHealingPwrOffsetSelf-healing power offset for this radiorw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.5.1.18 |
wsCcRfRadioRunAcsNowSet wsCcRfRadioRunAcsNow to 1 to run Acs.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.11.5.1.19 |
wsCcRfRadioResetParentApSet wsCcRfRadioResetParentAp to 1 to reset the parent Access Port of this radio.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.11.5.1.20 |
wsCcRfRadioResetSet wsCcRfRadioReset to 1 to reset the Radio.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.11.5.1.21 |
wsCcRfRadioRowStatusRows status of the wsCcRfRadioTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.22 |
wsCcRfRadioCcaLevelDescription.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.5.1.23 |
wsCcRfRadioCcaModeDescription.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.5.1.24 |
wsCcRfRadioRapSingleChannelScanEnable or disable single-channel scan for Rogue AP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.25 |
wsCcRfRadioBssDtimSet DTIM per BSS. DTIM period is not configurable on a per BSS basis for AP71X1 11n radios. These radios use a single DTIM period across all BSS in a radio which can be configured in wsCcRfRadioDtimPrd.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.11.5.1.26 |
wsCcRfRadioCfgMethodThe radio can be configured by user before being adopted or by the switch while adoptionro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.5.1.27 |
wsCcRfRadioMuLocationingEnableEnable/Disable MU locationing on this radiorw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.28 |
wsCcRfRadioRogueApLocationingEnableEnable/Disable rogue AP locationing on this radiorw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.29 |
wsCcRfRadioRssEnableSetting this object to True enables (False for disable) RSS (Remote Site Survivability) for this radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.5.1.31 |
wsCcRfRadioGroupIdThe group id that this radio belongs to. This field is used for the load-balancing feature wherein radios are combined in groups and MUs are discouraged from association if it not coming from the least loaded radio in the group. Group id 0 is used to indicate that this radio does not belong to any group.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.5.1.32 |
wsCcRfRadioLedModeThe mode of operation of the LEDs on the AP. The meanings of the values are: startFlashing - When the value startFlashing is written to this object, the parent AP of the radio begins flashing its LEDs to help locate it. stopFlashing- When the value stopFlashing is written to this object, the parent AP of the radio reverts its LEDs to normal mode of operation. idleState - When the value idleState is written to this object, no action is taken. When read, this object always returns the value idleState.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.5.1.33 |
wsCcRfRadioStateThe state of the radio. unseen : Configured, but not connected unadopted : Connected, but not adopted normal : Adopted and working normal detector : Adopted and is working as a detector selfHealing : Legacy self-healing rescuing : Adopted and is rescuing to recover for neighbor filling : Adopted and is filling in to recover coverage hole sensor : Sensorro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.5.1.34 |
wsCcRfRadioChannelPowerTableUse wsCcRfRadioChannelPower table to view and set the channel/power/placement properties of the radios. The process can be broken down into the following steps: 1. Set wsCcRfRadioCpReset to TRUE. 2. Set wsCcRfRadioCpPlacement 3. Get wsCcRfRadioCpPosChannel 4. Set wsCcRfRadioCpDesChannel 5. Get wsCcRfRadioCpPosPowerLevel 6. Set wsCcRfRadioCpDesPowerLevel 7. Get wsCcRfRadioCpPowerInMW 8. Set wsCcRfRadioCp11nChannelWidth 9. Set wsCcRfRadioCp11nSecondaryChannel 10. Set wsCcRfRadioCpSet SEQUENCE OF WsCcRfRadioChannelPowerEntry .1.3.6.1.4.1.388.14.3.2.1.11.6 |
wsCcRfRadioChannelPowerEntry WsCcRfRadioChannelPowerEntry .1.3.6.1.4.1.388.14.3.2.1.11.6.1 |
wsCcRfRadioCpPlacementThe placement for radio.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.6.1.1 |
wsCcRfRadioCpChannelModefixed mode: apply user selected channel random mode: random channel selection acs mode: auto channel selection (radio will scan for the least congested channel at startup or reconfiguration)rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.6.1.2 |
wsCcRfRadioCpPosChannelThe possible channels that can be set when placement = wsCcRfRadioCpPlacement.ro MultiPointer64 .1.3.6.1.4.1.388.14.3.2.1.11.6.1.3 |
wsCcRfRadioCpDesChannelThe desired channel for radio.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.6.1.4 |
wsCcRfRadioCpPosPowerDbThe max possible power level (dBm) that can be set when channel= wsCcRfRadioCpDesChannel.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.6.1.5 |
wsCcRfRadioCpDesPowerDbThe desired power level (dBm) for radio.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.6.1.6 |
wsCcRfRadioCpDesPowerMwwsCcRfRadioCpDesPowerLevel in mW.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.6.1.7 |
wsCcRfRadioCpSetValidate values in wsCcRfRadioCpDes fields. If it is a valid combination, configure the switch with this combination and set wsCcRfRadioCp_ to these values.rw DoActionShowProgress .1.3.6.1.4.1.388.14.3.2.1.11.6.1.8 |
wsCcRfRadioCpResetReset the following OIDs. wsCcRfRadioCpDesPlacement wsCcRfRadioCpDesChannel wsCcRfRadioCpDesPowerLevel wsCcRfRadioCpPosChannel wsCcRfRadioCpPosPowerLevel wsCcRfRadioCpPowerInMW wsCcRfRadioCp11nChannelWidth wsCcRfRadioCp11nSecondaryChannelrw DoActionShowProgress .1.3.6.1.4.1.388.14.3.2.1.11.6.1.9 |
wsCcRfRadioWmmTableConfiguration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network SEQUENCE OF WsCcRfRadioWmmEntry .1.3.6.1.4.1.388.14.3.2.1.11.7 |
wsCcRfRadioWmmEntry WsCcRfRadioWmmEntry .1.3.6.1.4.1.388.14.3.2.1.11.7.1 |
wsCcRfRadioWmmBeParmParameters for the Best Effort QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw RadioWmmConfig .1.3.6.1.4.1.388.14.3.2.1.11.7.1.1 |
wsCcRfRadioWmmBkParmParameters for the Background QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw RadioWmmConfig .1.3.6.1.4.1.388.14.3.2.1.11.7.1.2 |
wsCcRfRadioWmmViParmParameters for the Video QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw RadioWmmConfig .1.3.6.1.4.1.388.14.3.2.1.11.7.1.3 |
wsCcRfRadioWmmVoParmParameters for the Voice QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw RadioWmmConfig .1.3.6.1.4.1.388.14.3.2.1.11.7.1.4 |
wsCcRfRadioDefaultTableThis table lists the default setting for all supported radio for this switch. Please refer to wsCcRfRadioTable for column descriptions. SEQUENCE OF WsCcRfRadioDefaultEntry .1.3.6.1.4.1.388.14.3.2.1.11.8 |
wsCcRfRadioDefaultEntry WsCcRfRadioDefaultEntry .1.3.6.1.4.1.388.14.3.2.1.11.8.1 |
wsCcRfRadioDefaultIndexro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.1 |
wsCcRfRadioDefaultTypero RadioType .1.3.6.1.4.1.388.14.3.2.1.11.8.1.2 |
wsCcRfRadioDefaultApTypero ApType .1.3.6.1.4.1.388.14.3.2.1.11.8.1.3 |
wsCcRfRadioDefaultBssWlanMaprw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.11.8.1.4 |
wsCcRfRadioDefaultAntDiversityrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.8.1.5 |
wsCcRfRadioDefaultShortPreamblerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.8.1.6 |
wsCcRfRadioDefaultRtsThreshrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.7 |
wsCcRfRadioDefaultBeaconIntrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.8 |
wsCcRfRadioDefaultDtimPrdrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.9 |
wsCcRfRadioDefaultBasicRatesrw TransmitRate .1.3.6.1.4.1.388.14.3.2.1.11.8.1.10 |
wsCcRfRadioDefaultSupportedRatesrw TransmitRate .1.3.6.1.4.1.388.14.3.2.1.11.8.1.11 |
wsCcRfRadioDefaultRapDetectorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.8.1.12 |
wsCcRfRadioDefaultClusterIndexrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.13 |
wsCcRfRadioDefaultMaxMurw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.14 |
wsCcRfRadioDefaultSelfHealingActionrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.8.1.15 |
wsCcRfRadioDefaultSelfHealingPwrOffsetrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.8.1.16 |
wsCcRfRadioDefaultRapSingleChannelScanEnable or disable single-channel scan for Rogue AP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.8.1.17 |
wsCcRfRadioDefaultBssDtimSet DTIM per BSS. DTIM period is not configurable on a per BSS basis for AP71X1 11n radios. These radios use a single DTIM period across all BSS in a radio which can be configured in wsCcRfRadioDefaultDtimPrd.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.11.8.1.18 |
wsCcRfRadioDefaultMuLocationingEnableEnable/Disable MU locationing on this radiorw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.8.1.19 |
wsCcRfRadioDefaultRogueApLocationingEnableEnable/Disable Rogue AP locationing on this radiorw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.8.1.20 |
wsCcRfRadioDefaultAntGainAntenna gain. Please see the definition of RadioAntennaGain for additional information.rw RadioAntennaGain UNITS "0.1dBm" .1.3.6.1.4.1.388.14.3.2.1.11.8.1.24 |
wsCcRfRadioDefaultChannelPowerTableUse wsCcRfRadioDefaultChannelPower table to view and set the channel/power/placement properties of the default radio configurations. Please refer to the descriptions in wsCcRfRadioChannelPowerTable SEQUENCE OF WsCcRfRadioDefaultChannelPowerEntry .1.3.6.1.4.1.388.14.3.2.1.11.9 |
wsCcRfRadioDefaultChannelPowerEntry WsCcRfRadioDefaultChannelPowerEntry .1.3.6.1.4.1.388.14.3.2.1.11.9.1 |
wsCcRfRadioDefaultCpPlacementrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.9.1.1 |
wsCcRfRadioDefaultCpChannelModerw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.9.1.2 |
wsCcRfRadioDefaultCpPosChannelro MultiPointer64 .1.3.6.1.4.1.388.14.3.2.1.11.9.1.3 |
wsCcRfRadioDefaultCpDesChannelrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.9.1.4 |
wsCcRfRadioDefaultCpPosPowerDbro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.9.1.5 |
wsCcRfRadioDefaultCpDesPowerDbrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.9.1.6 |
wsCcRfRadioDefaultCpDesPowerMwro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.9.1.7 |
wsCcRfRadioDefaultCpSet.rw DoActionShowProgress .1.3.6.1.4.1.388.14.3.2.1.11.9.1.8 |
wsCcRfRadioDefaultCpResetrw DoActionShowProgress .1.3.6.1.4.1.388.14.3.2.1.11.9.1.9 |
wsCcRfRadioDefaultWmmTableConfiguration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network SEQUENCE OF WsCcRfRadioDefaultWmmEntry .1.3.6.1.4.1.388.14.3.2.1.11.10 |
wsCcRfRadioDefaultWmmEntry WsCcRfRadioDefaultWmmEntry .1.3.6.1.4.1.388.14.3.2.1.11.10.1 |
wsCcRfRadioDefaultWmmAccessCategoryA label for a particular QoS category of traffic in an 802.11e network. WMM defines 4 Access Categories (Voice, Video, Best Effort, Background).ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.10.1.1 |
wsCcRfRadioDefaultWmmAdmissionCtrlrwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.10.1.2 |
wsCcRfRadioDefaultWmmAifsnThe Arbitration Inter-Frame Spacing is the wait time in milliSeconds between data frames. A smaller number leads to greater priority for medium access.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.10.1.3 |
wsCcRfRadioDefaultWmmTxOpAn interval of time where an 802.11e station (MU/AP) has the right to initiate transmissions on the wireless medium.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.10.1.4 |
wsCcRfRadioDefaultWmmCwMinIf the medium is busy, or a transmitted frame collides, the AP or MU choose a random number between 0 and this minimum contention window size, to decide how long to wait before attempting (re)-transmission. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.10.1.5 |
wsCcRfRadioDefaultWmmCwMaxOn each collision the AP or MU doubles its initial contention window wait time, until that number is as large as this maximum contention window size. For ease of use this value is configured as a number between 0 and 10; the actual window is calculated using 2**x -1 where x is the value configured.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.10.1.6 |
wsCcRfRadioStatusTableStatus of adopted radios. SEQUENCE OF WsCcRfRadioStatusEntry .1.3.6.1.4.1.388.14.3.2.1.11.11 |
wsCcRfRadioStatusEntry WsCcRfRadioStatusEntry .1.3.6.1.4.1.388.14.3.2.1.11.11.1 |
wsCcRfRadioStatusRadioMacRadio MAC addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.11.1.1 |
wsCcRfRadioStatusStateThis value describes the state of the radio. A healthy radio would power-on, and quickly advance from radioUpAndWaitingForConfig and then on to radioReceivingConfig and then on to radioUpAndAdopted. A radio that is denied adoption due to ACLs would show: radioDeniedAdoptionDueToAcl. A radio that does not 'handshake' with the switch properly would be found in state: radioBroken.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.11.1.2 |
wsCcRfRadioStatusPtrToApThis value is the index in the ApTable for the entry representing the Access Port that contains this radio. Since each radio has one and only one Access Port as 'parent', this value is a simple integer, not a bit-mask.ro SinglePointer .1.3.6.1.4.1.388.14.3.2.1.11.11.1.3 |
wsCcRfRadioStatusMaxWlansthe maximum number of 802.11 ESSIDs (wireless lans) supported by this radioro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.4 |
wsCcRfRadioStatusMaxBssThe maximum number of 802.11 BSSIDs supported by this radioro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.5 |
wsCcRfRadioStatusCurrChannelcurrent channel (may be different from configured channel due to DFS etc).ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.6 |
wsCcRfRadioStatusCurrPowerDbOutput power level for the radio in Db.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.7 |
wsCcRfRadioStatusCurrPowerMwOutput power level for the radio in Mw.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.8 |
wsCcRfRadioStatusAssociatedMusNumber of associated MUs.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.9 |
wsCcRfRadioStatusLastAdoptionTimeticks since radio adoption timero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.11.11.1.10 |
wsCcRfRadioStatusShortSlotTimeIndicates the 802.11g short-slot time on the radioro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.11 |
wsCcRfRadioStatusVlanTagThe VLAN tag using which the switch is communicating with the radioro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.12 |
wsCcRfRadioStatusCfgMethodThe radio can be configured by user before being adopted or by the switch while adoption.rodeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.11.1.13 |
wsCcRfRadioStatusAssociatedVoiceMusNumber of MUs identified as voice associated.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.11.1.14 |
wsCcRf802dt1xRadioAuth OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.11.12 |
wsCcRf802dt1xRadioAuthLogin802.1x Port Authentication username.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.11.12.1 |
wsCcRf802dt1xRadioAuthPass802.1x Port Authentication password.rw Password .1.3.6.1.4.1.388.14.3.2.1.11.12.2 |
wsCcRf802dt1xRadioAuthSetRadioSet the username and password stored in wsCcRf802dt1xRadioAuthLogin and wsCcRf802dt1xRadioAuthPass on all radios adopted by the switch.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.11.12.3 |
wsCcRfRadioHealingModeCntDescription.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.13 |
wsCcRfRadioNormalModeCntDescription.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.11.14 |
wsCcRfRadioConfiguredCntNumber of configured radios. This is a count of the number of rows in wsCcRfRadioTable.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.15 |
wsCcRfRadioBridgeTableThis table gives information related to the bridging capabilities of the radios adopted by the wireless switch. SEQUENCE OF WsCcRfRadioBridgeEntry .1.3.6.1.4.1.388.14.3.2.1.11.16 |
wsCcRfRadioBridgeEntryAn entry in the wsCcRfRadioBridgeTable. WsCcRfRadioBridgeEntry .1.3.6.1.4.1.388.14.3.2.1.11.16.1 |
wsCcRfRadioBridgeClientBridgeEnableEnables or disables client-bridge functionality on the radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.16.1.1 |
wsCcRfRadioBridgeBaseBridgeEnableAllows the given radio to act as a base bridge and accept connections from client bridges.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.16.1.2 |
wsCcRfRadioBridgeSsidSet the bridge SSID (max length 32 characters).rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.11.16.1.3 |
wsCcRfRadioBridgeLinkTimeoutSet the bridge link timeout in seconds.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.16.1.4 |
wsCcRfRadioBridgeMaxClientBridgesSet the maximum client-bridge connections permissible.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.16.1.5 |
wsCcRfRadioGroupTableA read only table showing radios to their group id mapping. SEQUENCE OF WsCcRfRadioGroupEntry .1.3.6.1.4.1.388.14.3.2.1.11.20 |
wsCcRfRadioGroupEntryAn entry in wsCcRfRadioGroupTable. WsCcRfRadioGroupEntry .1.3.6.1.4.1.388.14.3.2.1.11.20.1 |
wsCcRfRadioGroupTableGrpIdThe group id to which this radio belongs.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.20.1.1 |
wsCcRfRadioGroupRadioIdThe radio id (value same as wsCcRfRadioIndex) which belongs to this group.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.11.20.1.2 |
wsCcRfRadioAdmissionControlTableConfigure admission control parameters for devices sending voice traffic. SEQUENCE OF WsCcRfRadioAdmissionControlEntry .1.3.6.1.4.1.388.14.3.2.1.11.21 |
wsCcRfRadioAdmissionControlEntryDescription. WsCcRfRadioAdmissionControlEntry .1.3.6.1.4.1.388.14.3.2.1.11.21.1 |
wsCcRfRadioAdmissionControlAccessCategoryA label for a particular QoS category of traffic. WMM standard suggests to perform admission control for maintaining QoS of traffic sent using Video and Voice access category.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.21.1.1 |
wsCcRfRadioAdmissionControlMaxAirTimeMaximum percentage of air time that can be distributed among devices sending traffic using a particular access category. For example, configuring a value of 70% for voice, means that a total 700 ms out of 1000 ms will be distributed among devices which setup voice calls. This helps in maintaining the QoS of existing calls on a particular radio.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.21.1.2 |
wsCcRfRadioAdmissionControlReservedRoamTimeMaxmimum percentage of air time reserved for devices which have roamed. This value should be less than the value specified for wsCcRfRadioAdmissionControlMaxAirTime.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.21.1.3 |
wsCcRfRadioAdmissionControlMaxAdmittedDevicesMax devices that the radio will admit for sending voice traffic without leading to oversubscription. A value of 0 would disable admission control for the access category.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.21.1.4 |
wsCcRfRadioAdmissionControlMaxRoamedDevicesMaximum roamed devices that the radio will admit for sending voice traffic after the count of admitted devices has reached wsCcRfRadioAdmissionControlMaxAdmittedDevices.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.21.1.5 |
wsCcRfRadioDefaultAdmissionControlTableConfigure default admission control parameters for different radios. SEQUENCE OF WsCcRfRadioDefaultAdmissionControlEntry .1.3.6.1.4.1.388.14.3.2.1.11.22 |
wsCcRfRadioDefaultAdmissionControlEntryDescription. WsCcRfRadioDefaultAdmissionControlEntry .1.3.6.1.4.1.388.14.3.2.1.11.22.1 |
wsCcRfRadioDefaultAdmissionControlAccessCategoryA label for a particular QoS category of traffic. WMM standard suggests to perform admission control for maintaining QoS of traffic sent using Video and Voice access category.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.22.1.1 |
wsCcRfRadioDefaultAdmissionControlMaxAirTimeThe default maximum percentage of air time for a particular access category.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.22.1.2 |
wsCcRfRadioDefaultAdmissionControlReservedRoamTimeThe default percentage of air time reserved for roaming for a particular access category.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.22.1.3 |
wsCcRfRadioDefaultAdmissionControlMaxAdmittedDevicesThe default maximum number of devices that can be admitted to send traffic using a particular access category.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.22.1.4 |
wsCcRfRadioDefaultAdmissionControlMaxRoamedDevicesThe default maximum roamed devices that a radio will admit for sending voice traffic after the count of admitted devices has reached wsCcRfRadioDefaultAdmissionControlMaxAdmittedDevices.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.22.1.5 |
wsCcRfRadioAdmissionControlStatusTableDescription. SEQUENCE OF WsCcRfRadioAdmissionControlStatusEntry .1.3.6.1.4.1.388.14.3.2.1.11.23 |
wsCcRfRadioAdmissionControlStatusEntryDescription. WsCcRfRadioAdmissionControlStatusEntry .1.3.6.1.4.1.388.14.3.2.1.11.23.1 |
wsCcRfRadioAdmissionControlStatusAccessCategoryAdmission control statistics for WMM voice access category.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.23.1.1 |
wsCcRfRadioAdmissionControlStatusAirTimeUsageThe total percentage of air time used on the radio by devices which have been admitted.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.23.1.2 |
wsCcRfRadioAdmissionControlStatusAdmittedDevicesTotal count of admitted devices.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.23.1.3 |
wsCcRfRadioAdmissionControlStatusRoamedDevicesTotal count of roamed devices which have been admitted.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.23.1.4 |
wsCcRfRadioAdmissionControlStatusRequestDeniedTotal count of requests which have been denied either due to insufficient air time or maximum device capacity.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.23.1.5 |
wsCcRfRadioAdmissionControlEnableEnable admission control for voice traffic. This also enables WMM admission control for Voice access category. A value of 0 disables admission control across all radios.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.24 |
wsCcRfRadioWipsTableThis table gives information related to the WIPS mode of the radios adopted by the wireless switch. SEQUENCE OF WsCcRfRadioWipsEntry .1.3.6.1.4.1.388.14.3.2.1.11.25 |
wsCcRfRadioWipsEntryAn entry in the wsCcRfRadioWipsTable. WsCcRfRadioWipsEntry .1.3.6.1.4.1.388.14.3.2.1.11.25.1 |
wsCcRfRadioRfFunctionWipsEnableConverts the given radio from the WLAN mode to the WIPS mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.25.1.1 |
wsCcRfRadio11nTableThis table lists all 11n radios adopted by this wireless switch. A row in this table is an extension of a row in wsCcRfRadioTable with the relationship being sparse. SEQUENCE OF WsCcRfRadio11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.26 |
wsCcRfRadio11nEntryAn entry in the table. WsCcRfRadio11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.26.1 |
wsCcRfRadio11nShortGIEnableEnable/Disable short guard interval.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.26.1.1 |
wsCcRfRadio11nAmpduMinSpacingThe minimum spacing between the start of adjacent MPDUs within an A-MPDU.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.26.1.2 |
wsCcRfRadio11nAmpduRxLimitThe maximum length of A-MPDU that the radio can receive.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.26.1.3 |
wsCcRfRadio11nAmpduTxLimitThe maximum length of A-MPDU that the radio can send.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.26.1.4 |
wsCcRfRadio11nAmpduTxEnableEnable/Disable transmission of A-MPDU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.26.1.5 |
wsCcRfRadioDefault11nTableThis table lists the default setting for all supported 11n radios for this wireless switch. A row in this table is an extension of a row in wsCcRfRadioDefaultTable with the relationship being sparse. SEQUENCE OF WsCcRfRadioDefault11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.27 |
wsCcRfRadioDefault11nEntryAn entry in the table. WsCcRfRadioDefault11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.27.1 |
wsCcRfRadioDefault11nShortGIEnableEnable/Disable short guard interval.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.27.1.1 |
wsCcRfRadioDefault11nAmpduMinSpacingThe minimum spacing between the start of adjacent MPDUs within an A-MPDU.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.27.1.2 |
wsCcRfRadioDefault11nAmpduRxLimitThe maximum length of A-MPDU that the radio can receive.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.27.1.3 |
wsCcRfRadioDefault11nAmpduTxLimitThe maximum length of A-MPDU that the radio can send.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.11.27.1.4 |
wsCcRfRadioDefault11nAmpduTxEnableEnable/Disable transmission of A-MPDU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.11.27.1.5 |
wsCcRfRadioChannelPower11nTableThis table lists the channel/power/placement properties of 11n radio. A row in this table is an extension of a row in wsCcRfRadioChannelPowerTable with the relationship being sparse. SEQUENCE OF WsCcRfRadioChannelPower11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.28 |
wsCcRfRadioChannelPower11nEntryAn entry in the table. WsCcRfRadioChannelPower11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.28.1 |
wsCcRfRadioCp11nChannelWidthThe channel width. This object is for 11n radio when wsCcRfRadioCpChannelMode is 'random' or 'acs'. Values of channel width are: 20 MHz - The Legacy mode, single channel is used 40 MHz - Primary and secondary channel chosen The default channel width is 40 MHz.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.28.1.1 |
wsCcRfRadioCp11nSecondaryChannelThe choice for secondary channel. This object is for 11n radio when wsCcRfRadioCpChannelMode is 'fixed'. Values of secondary channel are: none - 20 MHz channel width is used. upper - The upper adjacent channel is used thereby doubling the channel width lower - The lower adjacent channel is used thereby doubling the channel width. The default value is 'none'.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.28.1.2 |
wsCcRfRadioDefaultChannelPower11nTableThis table lists the default channel/power/placement properties of 11n radio. A row in this table is an extension of a row in wsCcRfRadioDefaultChannelPowerTable with the relationship being sparse. SEQUENCE OF WsCcRfRadioDefaultChannelPower11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.29 |
wsCcRfRadioDefaultChannelPower11nEntryAn entry in the table. WsCcRfRadioDefaultChannelPower11nEntry .1.3.6.1.4.1.388.14.3.2.1.11.29.1 |
wsCcRfRadioDefaultCp11nChannelWidthThe default channel width. This object is for 11n radio when wsCcRfRadioDefaultCpChannelMode is 'random' or 'acs'. Values of channel width are: 20 MHz - The Legacy mode, single channel is used 40 MHz - Primary and secondary channel chosen The default channel width is 40 MHz.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.11.29.1.1 |
wsCcRfMus OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.12 |
wsCcRfMuCntNumber of rows in the wsCcRfMuTablero Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.1 |
wsCcRfMuLastMacThis scalar records the MAC address of the most recent mu to be associated/disassociated.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.2 |
wsCcRfMuTableThis table describes general information about each MU serviced by the switch. SEQUENCE OF WsCcRfMuEntry .1.3.6.1.4.1.388.14.3.2.1.12.3 |
wsCcRfMuEntry WsCcRfMuEntry .1.3.6.1.4.1.388.14.3.2.1.12.3.1 |
wsCcRfMuMacMAC address of the MU.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.1 |
wsCcRfMuWlanIndex(Reserved for future implementation).ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.2 |
wsCcRfMuRadioIndexThe index of the entry in the wsCcRfRadioTable to which this MU is associated.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.3 |
wsCcRfMuVlanIndexThe VLAN that this MU is assigned to.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.4 |
wsCcRfMuKeyIndexThe key index using which the MU is sending us frames. Useful when pre-shared keys are used with WEP, as we will know if this MU isro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.5 |
wsCcRfMuIpAddrIP address of the MU.ro IpAddress .1.3.6.1.4.1.388.14.3.2.1.12.3.1.6 |
wsCcRfMuBSSThe BSSID that this MU is associated with.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.7 |
wsCcRfMuAuthMethodAuthentication method implemented by the MU.ro AuthType .1.3.6.1.4.1.388.14.3.2.1.12.3.1.8 |
wsCcRfMuEncMethodEncryption method implemented by the MU.ro EncType .1.3.6.1.4.1.388.14.3.2.1.12.3.1.9 |
wsCcRfMuRadioTypeRadio type of the MU.ro RadioType .1.3.6.1.4.1.388.14.3.2.1.12.3.1.10 |
wsCcRfMuPowerModePower-mode implemented by the MU. A MU's status will constantly switch between PSP and CAM mode when it is in PSP mode.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.3.1.11 |
wsCcRfMuSupportedRatesA bit-mask of rates supported by this MU.ro TransmitRate .1.3.6.1.4.1.388.14.3.2.1.12.3.1.12 |
wsCcRfMuVoiceWhether this MU has registered itself as voice-capable.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.3.1.13 |
wsCcRfMuIsDataReadyThis value is true if the wireless switch is ready to forward/switch packets to/from this MU, (internally called the 'data ready' state). Otherwise this value is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.14 |
wsCcRfMuRogueApEnaIf true, this MU supports Rogue AP detection assist algorithm.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.15 |
wsCcRfMuIsWmmIf the MU is using WMMro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.16 |
wsCcRfMuRoamCountNumber of times the mu has roamed without de-authentication.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.17 |
wsCcRfMuLastHeardTimeticks since last heard from MU.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.18 |
wsCcRfMuDisassociateNowSetting this value to one initiates the action to disassociate the MU.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.12.3.1.19 |
wsCcRfMuTunnelIndexThe tunnel identifier for this MU.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.3.1.20 |
wsCcRfMuQosInfoUAPSD parameters for a given MU. Has the following bit values : Bit 0 - UAPSD enabled for Voice AC Bit 1 - UAPSD enabled for Video AC Bit 2 - UAPSD enabled for Best-Effort AC Bit 3 - UAPSD enabled for Background AC Bits 4-5 - UAPSD service period ( 00 - unlimited, 01 - 2 packets, 10 - 4 packets, 11 - 6 packets ).ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.3.1.21 |
wsCcRfMuLastAssocNumber of seconds elapsed since the last association.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.22 |
wsCcRfMuSessionTimeoutSession Timeoutro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.23 |
wsCcRfMuIdleTimeoutIdle Timeoutro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.3.1.24 |
wsCcRfMuRoleNameThe name of the role that this MU is assigned withro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.25 |
wsCcRfMuGroupRadius user group to which the MU belongs toro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.26 |
wsCcRfMuLocationMU is connected from which zone. This information will be provided by SOLE engine.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.3.1.27 |
wsCcRfMuLockOutNowSetting this object to one(1) initiates the action to disassociate the MU and set the MAC filter (i.e. associate the ACL) for this MU in one shot.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.12.3.1.28 |
wsCcRfMuHistoryTableDescription.deprecated SEQUENCE OF WsCcRfMuHistoryEntry .1.3.6.1.4.1.388.14.3.2.1.12.4 |
wsCcRfMuHistoryEntryDescription.deprecated WsCcRfMuHistoryEntry .1.3.6.1.4.1.388.14.3.2.1.12.4.1 |
wsCcRfMuHistoryIndexSimple Indexrodeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.4.1.1 |
wsCcRfMuHistoryMacMAC address of MUrodeprecated PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.4.1.2 |
wsCcRfMuHistoryRadioIndexIndex of Radiorodeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.4.1.3 |
wsCcRfMuHistoryWlanIndexIndex of Wlanrodeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.4.1.4 |
wsCcRfMuHistoryTimestampThe event happened wsCcRfMuHistoryTimestamp seconds agorwdeprecated Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.4.1.5 |
wsCcRfMuHistoryEventEvent: Adoption, disassociation or timeout.rwdeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.4.1.6 |
wsCfRfMuProbeHistoryTableDescription.deprecated SEQUENCE OF WsCfRfMuProbeHistoryEntry .1.3.6.1.4.1.388.14.3.2.1.12.5 |
wsCfRfMuProbeHistoryEntryDescription.deprecated WsCfRfMuProbeHistoryEntry .1.3.6.1.4.1.388.14.3.2.1.12.5.1 |
wsCfRfMuProbeHistoryMacDescription.rodeprecated PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.5.1.1 |
wsCfRfMuProbeHistoryIndexSimple Indexrodeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.5.1.2 |
wsCfRfMuProbeHistoryTimeticksDate and Timerodeprecated Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.5.1.4 |
wsCfRfMuProbeHistorySignalStrengthIt is not yet decided if this will be reported in db or rssirodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.5.1.5 |
wsCfRfMuProbeHeardRadioIndex of the heard radio.rodeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.5.1.6 |
wsCcRfMuProbeRequestsAgeHeardOutRange is from 15 secs - 15 minutesrw INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.6 |
wsCcRfMuHistoryEnableEnable / disable MU history data collectionrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.7 |
wsCcRfMuHistoryClearClears the entries in the MU History table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.8 |
wsCcRfMuProbeHistoryEnableEnable / disable MU probe history data collectionrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.9 |
wsCcRfMuProbeHistoryClearClears the entries in the MU Probe History table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.10 |
wsCcRfMuProbeConfigTableTable to configure MUs that have to be tracked for probe history status SEQUENCE OF WsCcRfMuProbeConfigEntry .1.3.6.1.4.1.388.14.3.2.1.12.11 |
wsCcRfMuProbeConfigEntryDescription. WsCcRfMuProbeConfigEntry .1.3.6.1.4.1.388.14.3.2.1.12.11.1 |
wsCcRfMuProbeConfigIndexSimple indexro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.11.1.1 |
wsCcRfMuProbeConfigMacMAc address of MU to be trackedrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.11.1.2 |
wsCcRfMuProbeConfigStatusSet tracking on or off for particular MUrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.11.1.3 |
wsCcRfMuProbeStatusTableStatus of MU probe history SEQUENCE OF WsCcRfMuProbeStatusEntry .1.3.6.1.4.1.388.14.3.2.1.12.12 |
wsCcRfMuProbeStatusEntryDescription. WsCcRfMuProbeStatusEntry .1.3.6.1.4.1.388.14.3.2.1.12.12.1 |
wsCcRfMuProbeStatusIndexSimple Indexro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.12.1.1 |
wsCcRfMuProbeStatusMacMac Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.12.1.2 |
wsCcRfMuProbeStatusTimeticksDate and Timero Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.12.1.4 |
wsCcRfMuProbeStatusSignalStrengthIt is not yet decided if this will be reported in db or rssiro Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.12.1.5 |
wsCcRfMuProbeStatusHeardRadioIndex of the heard radio.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.12.1.6 |
wsCcRfMuHistoryStatusMacThe Mac addres which the user want to view the history statusrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.13 |
wsCcRfMuHistoryStatusTablewsCcRfMuHistoryStatusTable, the procedure to view the table will be: 1.set the Mac address you are interested in wsCcRfMuHistoryStatusMac 2.do a walk of the table, and it will show you the history of that MU SEQUENCE OF WsCcRfMuHistoryStatusEntry .1.3.6.1.4.1.388.14.3.2.1.12.14 |
wsCcRfMuHistoryStatusEntrywsCcRfMuHistoryStatusEntry WsCcRfMuHistoryStatusEntry .1.3.6.1.4.1.388.14.3.2.1.12.14.1 |
wsCcRfMuHistoryStatusIndexSimple index of wsCcRfMuHistoryStatusTablero INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.14.1.1 |
wsCcRfMuHistoryStatusRadioIndexIndex of Radioro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.14.1.2 |
wsCcRfMuHistoryStatusWlanIndexIndex of Wlanro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.14.1.3 |
wsCcRfMuHistoryStatusTimestampThe event happened wsCcRfMuHistoryTimestamp seconds agoro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.12.14.1.4 |
wsCcRfMuHistoryStatusEventEvent: Adoption, disassociation or timeoutro Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.14.1.5 |
wsCcRfMuLocationing OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.12.15 |
wsCcRfMuLocationingPreferredTableTable having MAC addresses of the preferred MUs. Locationing information for these MUs would be captured/reported. SEQUENCE OF WsCcRfMuLocationingPreferredEntry .1.3.6.1.4.1.388.14.3.2.1.12.15.1 |
wsCcRfMuLocationingPreferredEntryAn entry for the MU locationing Preferred table WsCcRfMuLocationingPreferredEntry .1.3.6.1.4.1.388.14.3.2.1.12.15.1.1 |
wsCcRfMuLocationingPreferredIndexIndex of the rowro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.15.1.1.1 |
wsCcRfMuLocationingPreferredMuMacMAC address of the MUrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.15.1.1.2 |
wsCcRfMuLocationingPreferredRowStatusRow Statusrw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.12.15.1.1.3 |
wsCcRfMuLocationingTableTable giving locationing information about the various MUs. SEQUENCE OF WsCcRfMuLocationingEntry .1.3.6.1.4.1.388.14.3.2.1.12.15.2 |
wsCcRfMuLocationingEntryAn entry in MU Locationing Table WsCcRfMuLocationingEntry .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1 |
wsCcRfMuLocationingIndexIndex of the rowro INTEGER .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.1 |
wsCcRfMuLocationingMuMacMAC address of the MUro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.2 |
wsCcRfMuLocationingRadioMacThe MAC address of the radio that heard the Probe Request from the MUro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.3 |
wsCcRfMuLocationingSignalStrengthThe received Signal Strength in dBmro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.4 |
wsCcRfMuLocationingHeardChannelChannel on which the MU Probe Request was heardro Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.5 |
wsCcRfMuLocationingHeardTimeTime in timeticks (since boot), when the MU Probe Request was heardro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.12.15.2.1.6 |
wsCcRfMuLocationingEnableEnable/Disable MU locationing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.12.15.3 |
wsCcRfMuLocationingMaxMusMaximum number of MUs for MU locationing table.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.15.4 |
wsCcRfMuLocationingWindowTimeTime window in seconds to collect the MU probe requests for a MU-Radio pairrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.15.5 |
wsCcRfMuLocationingNumMuCurrent number of MUs in the table.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.12.15.6 |
wsCcRfMuLocationingClearErase the MU locationing Table.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.12.15.7 |
wsCcRfMuRateLimiting OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.12.16 |
wsCcRfMuRateLimitingUpRate limit in uplink direction, from wireless client to network. The rate is in the range of <100-100000> kbps. The value 0 means that rate limiting is disabled.rw INTEGER (0 | 100..100000) UNITS "kbps" .1.3.6.1.4.1.388.14.3.2.1.12.16.1 |
wsCcRfMuRateLimitingDownRate limit in downlink direction, from network to wireless client. The rate is in the range of <100-100000> kbps. The value 0 means that rate limiting is disabled.rw INTEGER (0 | 100..100000) UNITS "kbps" .1.3.6.1.4.1.388.14.3.2.1.12.16.2 |
wsCcRfMuLoadBalancingMethodConfigure the MUs to be load balanced by user count or by by radio throughput threshold.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.12.17 |
wsCcRfWlan OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.14 |
wsCcRfWlanTableTable of wireless LANs on the switch. SEQUENCE OF WsCcRfWlanEntry .1.3.6.1.4.1.388.14.3.2.1.14.1 |
wsCcRfWlanEntry WsCcRfWlanEntry .1.3.6.1.4.1.388.14.3.2.1.14.1.1 |
wsCcRfWlanIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.1.1.1 |
wsCcRfWlanEnableEnable/Disable wireless Lan. If this wlan is referenced by wsCcRfRadioBssWlanMap, a set to disabled mode will fail.rw StaticRowEnable .1.3.6.1.4.1.388.14.3.2.1.14.1.1.2 |
wsCcRfWlanDescrDescription the Wlan.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.1.1.3 |
wsCcRfWlanEssidESSID of the WLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.4 |
wsCcRfWlanVlanThe Vlan this Wlan is associated with. If not associated with any Vlan, this value will be 0. This object's functionality has now been replaced with wsCcRfWlanVlanTable, which allows to configure upto 32 VLANs per WLAN.rwdeprecated Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.1.1.5 |
wsCcRfWlanDisallowMuToMuSet to true to prohibit MU-to-MU communication.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.6 |
wsCcRfWlanSecBeaconEnable the Secure Beacon checkbox to disallow the Access Port from broadcasting an ESSID in its beacons. This is a safeguard to prevent intruders from tapping into the WLAN. Consider this security measure for a private, corporate network.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.7 |
wsCcRfWlanVoicePrioritizationEnable voice prioritization.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.8 |
wsCcRfWlanAnswerBroadcastEssAnswer broadcast ESS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.9 |
wsCcRfWlanMulticastAddr1Multicast address 1.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.10 |
wsCcRfWlanMulticastAddr2Multicast address 2.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.11 |
wsCcRfWlanWeightThe weight to be used when QoS for all WLANs is set to weighted-round-robin. Note that the sum of all weights across all WLANs need not total 100.rwdeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.1.1.12 |
wsCcRfWlanWmmEnableEnable/Disable WMM on this wireless LANrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.13 |
wsCcRfWlanSvpEnableEnable/Disable support for Spectralink Voice Prioritization on this wireless LANrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.14 |
wsCcRfWlanAuthenticationIf auth802dot1xEap, additional EAP settings for this WLAN will be used from the matching entry in the wireless authentication.rw AuthType .1.3.6.1.4.1.388.14.3.2.1.14.1.1.15 |
wsCcRfWlanEncryptionMap** this needs to be a bitmap of enc types ** If cryptoWep64 or cryptoWep128, additional WEP settings for this WLAN will be used from the matching entry in the ccWlanCryptoWepTable. Likewise, if cryptoWpaTkip, use the settings in the matching entry in the ccWlanCryptoWpaTable. Likewise, if cryptoKeyguardMcm, use the settings in the matching entry in the ccWlanCryptoKeyguardTable.rw EncMap .1.3.6.1.4.1.388.14.3.2.1.14.1.1.16 |
wsCcRfWlanBcastEncThe broadcast encryption type in use on a WLAN. In most cases it is same as the unicast encryption type. When multiple encryption types are supported (TKIP+CCMP) it is usually the lowest encryption type.ro EncType .1.3.6.1.4.1.388.14.3.2.1.14.1.1.17 |
wsCcRfWlanNumRadiosAdoptedNumber of radios adopted.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.1.1.18 |
wsCcRfWlanUseDscpUse Dscp when tagged.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.19 |
wsCcRfWlanMuIdleTimeThe number of seconds for which if the switch does not receive/send any data frames from/to an MU, it disassociates the MU. If an MU roams away from an access point without disassociating, this timeout helps the switch determine that the MU is gone, and clear resources allocated for that MU.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.1.1.20 |
wsCcRfWlanMobilityEnableDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.21 |
wsCcRfWlanGRETunnelIdxDescription.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.1.1.22 |
wsCcRfWlanGRETunnelGatewayIpDescription.rwdeprecated IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.1.1.23 |
wsCcRfWlanGRETunnelGatewayMaskDescription.rwdeprecated IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.1.1.24 |
wsCcRfWlanMuToMuStates the mode of operation for MU-to-MU communications in the wireless switch. drop(1): traffic is not relayed to other MUs. allow(2): traffic is relayed to other MUs. The value switchToWired(3) is deprecated. Using switchToWired(3) is identical in behavior to the value allow(2).rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.1.1.25 |
wsCcRfWlanQosPrioritizationSets the prioritization of the WLAN for QoS purposes.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.1.1.26 |
wsCcRfWlanDynamicVlanAssignmentEnables or disables dynamic VLAN assignment for the WLAN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.27 |
wsCcRfWlanAccountingTypeIndicates if the accounting type is Radius, Syslog or turned off.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.1.1.28 |
wsCcRfWlanSyslogServerIpIP Address of the Syslog serverrw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.1.1.29 |
wsCcRfWlanSyslogServerPortPort of the Syslog Serverrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.1.1.30 |
wsCcRfWlanNacModeSet NAC mode to 1. Do NAC validation for all MU's except one in exclude list 2. By pass NAC validation for all MU's but include those that are in include list 3. No NAC operation. Go thru RADIUS server if authentication is set to EAPrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.1.1.31 |
wsCcRfWlanQosWeightSets the weight of a WLAN.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.1.1.32 |
wsCcRfWlanHoldTimeHold time in seconds. The user credentials would hold for this much time when it leaves or roams away.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.1.1.33 |
wsCcRfWlanIndependentModeEnableIf true, it means that the Independent mode for this WLAN is enabled. That allows it to be used by AAPs. A false value means that the WLAN is in 'regular' mode and cannot be used for AAPs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.34 |
wsCcRfWlanClientBridgeBackhaulEnableEnable client bridge backhaul. Requires wsCcRfWlanIndependentModeEnable to be True for this flag to be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.1.1.35 |
wsCcRfWlanAuth OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.14.2 |
wsCcRfWlanAuthEapTableTable of EAP authentication settings for each WLAN. SEQUENCE OF WsCcRfWlanAuthEapEntry .1.3.6.1.4.1.388.14.3.2.1.14.2.1 |
wsCcRfWlanAuthEapEntry WsCcRfWlanAuthEapEntry .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1 |
wsCcRfWlanAuthEapRadiusServerIp1IP address of the 1st RADIUS server.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.1 |
wsCcRfWlanAuthEapRadiusServerPort1Port number of the 1st RADIUS server.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.2 |
wsCcRfWlanAuthEapRadiusServerSecret1Shared secret of the 1st RADIUS server.rw Password .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.3 |
wsCcRfWlanAuthEapRadiusServerIp2IP address of the 2nd RADIUS server.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.4 |
wsCcRfWlanAuthEapRadiusServerPort2Port number of the 2nd RADIUS server.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.5 |
wsCcRfWlanAuthEapRadiusServerSecret2Shared secret of the 2nd RADIUS server.rw Password .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.6 |
wsCcRfWlanAuthEapSuppRetriesSupplicant max retries.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.7 |
wsCcRfWlanAuthEapSuppTimeoutSupplicant timeout.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.8 |
wsCcRfWlanAuthEapServerRetriesServer max retries.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.9 |
wsCcRfWlanAuthEapServerTimeoutServer timeout.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.10 |
wsCcRfWlanAuthEapReauthEnable reauthentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.11 |
wsCcRfWlanAuthEapReauthTimeoutReauthentication timeout.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.12 |
wsCcRfWlanAuthEapAuthProtocolThe authentication protocol to be used, PAP or CHAP.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.13 |
wsCcRfWlanAuthEapDscpTosDSCP or TOS value to be used (between 0 and 63).rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.14 |
wsCcRfWlanAuthEapAccountingModeIndicates if mode of accounting is one of: Start-Stop, Start-only or Start-interim-Stoprw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.15 |
wsCcRfWlanAuthEapInterimAcctIntervalInterval for interim accountingrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.16 |
wsCcRfWlanAuthEapAcctTimeoutTimeout value for accounting optionrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.17 |
wsCcRfWlanAuthEapAcctRetriesNumber of accounting retriesrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.18 |
wsCcRfWlanAuthPrimaryServerIP Address of the Primary Accounting Serverrw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.19 |
wsCcRfWlanAuthEapSecondaryServerIP Address of the Secondary Accounting Serverrw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.20 |
wsCcRfWlanAuthEapPrimarySrvrPortPort Number of the Primary Serverrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.21 |
wsCcRfWlanAuthEapSecondarySrvrPortPort Number of the Secondary Serverrw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.22 |
wsCcRfWlanAuthEapPrimarySecretShared secret of the Primary Accounting server.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.23 |
wsCcRfWlanAuthEapSecondarySecretShared secret of the Secondary Accounting server.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.24 |
wsCcRfWlanAuthEapRadiusMacAuthFormatThe format of the MAC address to be sent to a RADIUS server when using MAC authentication: no-delim: No Delimiter - AABBCCDDEEFF pair-colon: Colon Delmilter per Pair - AA:BB:CC:DD:EE:FF pair-dash: Dash Delimiter per Pair - AA-BB-CC-DD-EE-FF quad-dot: Dot Delimiter per Four Hex - AABB.CCDD.EEFF middle-dash: Dash Delmiter in the middle - AABBCC-DDEEFFrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.25 |
wsCcRfWlanAuthEapAapProxyRadiusEnableEnable proxying AAP radius requests.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.26 |
wsCcRfWlanAuthEapRadiusDynamicAuthEnableEnable support for Radius Dynamic Authorization extensions such as Disconnect Message, and Change-Of-Authorization, as described in RFC 3576rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.2.1.1.27 |
wsCcRfWlanAuthKerberosTableTable of Kerberos authentication settings for each WLAN. SEQUENCE OF WsCcRfWlanAuthKerberosEntry .1.3.6.1.4.1.388.14.3.2.1.14.2.2 |
wsCcRfWlanAuthKerberosEntry WsCcRfWlanAuthKerberosEntry .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1 |
wsCcRfwlanAuthKerbRealmRealm name. A realm name functions similarly to a DNS domain name. In theory, the realm name is arbitrary. However, in practice a Kerberos realm is named by uppercasing the DNS domain name that is associated with hosts in the realm.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.1 |
wsCcRfWlanAuthKerbPasswordPassword for the Kerberos configuration.rw Password .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.2 |
wsCcRfWlanAuthKerbKdcServerIp1IP address of the 1st Kerberos server.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.3 |
wsCcRfWlanAuthKerbKdcServerPort1Port number of the 1st Kerberos server.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.4 |
wsCcRfWlanAuthKerbKdcServerIp2IP address of the 2nd Kerberos server.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.5 |
wsCcRfWlanAuthKerbKdcServerPort2Port number of the 2nd Kerberos server.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.6 |
wsCcRfWlanAuthKerberosServerTimeoutDescription.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.2.1.7 |
wsCcRfWlanAuthEapNACServerTableTable of Exclude lists EAP authentication settings for each WLAN. SEQUENCE OF WsCcRfWlanAuthEapNACServerEntry .1.3.6.1.4.1.388.14.3.2.1.14.2.3 |
wsCcRfWlanAuthEapNACServerEntry WsCcRfWlanAuthEapNACServerEntry .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1 |
wsCcRfWlanAuthEapNACServerIp1IP address of the 1st NAC server.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.1 |
wsCcRfWlanAuthEapNACServerPort1Port number of the 1st NAC server.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.2 |
wsCcRfWlanAuthEapNACServerSecret1Shared secret of the 1st NAC server.rw Password .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.3 |
wsCcRfWlanAuthEapNACServerIp2IP address of the 2nd NAC server.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.4 |
wsCcRfWlanAuthEapNACServerPort2Port number of the 2nd NAC server.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.5 |
wsCcRfWlanAuthEapNACServerSecret2Shared secret of the 2nd NAC server.rw Password .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.6 |
wsCcRfWlanAuthEapNACServerRetriesServer max retries.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.7 |
wsCcRfWlanAuthEapNACServerTimeoutServer timeout.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.2.3.1.8 |
wsCcRfWlanEnc OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.14.3 |
wsCcRfWlanEncSkEnableEnable/disable Wlan encryption shared-keyrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.3.1 |
wsCcRfWlanEncWep64TableTable of WEP encryption settings for each WLAN. SEQUENCE OF WsCcRfWlanEncWep64Entry .1.3.6.1.4.1.388.14.3.2.1.14.3.2 |
wsCcRfWlanEncWep64Entry WsCcRfWlanEncWep64Entry .1.3.6.1.4.1.388.14.3.2.1.14.3.2.1 |
wsCcRfWlanEncWep64KeyIndexSpecifies which WEP key to use.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.1 |
wsCcRfWlanEncWep64Key1WEP key #1 exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.2 |
wsCcRfWlanEncWep64Key2WEP key #2 exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.3 |
wsCcRfWlanEncWep64Key3WEP key #3 exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.4 |
wsCcRfWlanEncWep64Key4WEP key #4 exactly 5 octets for WEP-64 (40-bit key).rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.2.1.5 |
wsCcRfWlanEncWep128KgTableTable of WEP encryption settings for each WLAN. SEQUENCE OF WsCcRfWlanEncWep128KgEntry .1.3.6.1.4.1.388.14.3.2.1.14.3.3 |
wsCcRfWlanEncWep128KgEntry WsCcRfWlanEncWep128KgEntry .1.3.6.1.4.1.388.14.3.2.1.14.3.3.1 |
wsCcRfWlanEncWep128KgKeyIndexSpecifies which WEP key to use.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.1 |
wsCcRfWlanEncWep128KgKey1WEP key #1 exactly 13 octets for WEP-128 (104-bit key);rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.2 |
wsCcRfWlanEncWep128KgKey2WEP key #2 exactly 13 octets for WEP-128 (104-bit key);rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.3 |
wsCcRfWlanEncWep128KgKey3WEP key #3 exactly 13 octets for WEP-128 (104-bit key);rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.4 |
wsCcRfWlanEncWep128KgKey4WEP key #4 exactly 13 octets for WEP-128 (104-bit key);rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.3.1.5 |
wsCcRfWlanEncTkipCcmpTableTable of Tkip/Ccmp encryption settings for each WLAN. SEQUENCE OF WsCcRfWlanEncTkipCcmpEntry .1.3.6.1.4.1.388.14.3.2.1.14.3.4 |
wsCcRfWlanEncTkipCcmpEntry WsCcRfWlanEncTkipCcmpEntry .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1 |
wsCcRfWlanEncTkipCcmpKeyTypeSpecify whether to use key or passphrase.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.1 |
wsCcRfWlanEncTkipCcmpPassphrasePassphrase.rw Password .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.2 |
wsCcRfWlanEncTkipCcmpKeyKey.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.3 |
wsCcRfWlanEncTkipCcmpKeyRotationA truth-value that indicates whether the group key for a TKIP/CCMP mobile-unit should be periodically rotated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.4 |
wsCcRfWlanEncTkipCcmpKeyIntervalThe number of seconds after which the broadcast key of all mobile-units on a particular wireless lan is replaced by a new broadcast key.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.5 |
wsCcRfWlanEncTkipCcmpPmkCachingWhether IEEE 802.11i PMK caching is enabled. Use of PMK caching allows a mobile-unit to authenticate just once to an AP, even if it roams away from it, and roams back to it. Enabling this feature results in much faster roam times on wireless LANs that use 802.1x authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.6 |
wsCcRfWlanEncTkipCcmpOppPmkCachingWhether extensions to IEEE 802.11i PMK caching, known as opportunistic PMK caching, are enabled. It extends PMK caching (authenticate once to an AP) to the whole switch (authenticate once to a switch). Enabling this feature results in much faster roam times on wireless LANs that use 802.1x authenticationrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.7 |
wsCcRfWlanEncTkipCcmpPreauthenticationWhether pre-authentication is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.3.4.1.8 |
wsCcRfWlanEncPhraseToWep OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.14.3.5 |
wsCcRfWlanEncP2WPassphraseAn input to an algorithm used to convert ascii into wep keys.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.3.5.1 |
wsCcRfWlanEncP2WKey1Generated Wep128 key #1.ro OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.5.2 |
wsCcRfWlanEncP2WKey2Generated Wep128 key #2.ro OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.5.3 |
wsCcRfWlanEncP2WKey3Generated Wep128 key #3.ro OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.5.4 |
wsCcRfWlanEncP2WKey4Generated Wep128 key #4.ro OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.14.3.5.5 |
wsCcRfWlanEncP2WClearKeysSetting this scalar to 1 will clear all wep key fields.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.14.3.5.6 |
wsCcRfWlanWmmTableConfiguration parameters for 802.11e / Wireless MultiMedia, which control the Quality of Service between the wireless devices on the network SEQUENCE OF WsCcRfWlanWmmEntry .1.3.6.1.4.1.388.14.3.2.1.14.4 |
wsCcRfWlanWmmEntry WsCcRfWlanWmmEntry .1.3.6.1.4.1.388.14.3.2.1.14.4.1 |
wsCcRfWlanWmmBeParmParameters for the Best Effort QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw WlanWmmConfig .1.3.6.1.4.1.388.14.3.2.1.14.4.1.1 |
wsCcRfWlanWmmBkParmParameters for the Background QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw WlanWmmConfig .1.3.6.1.4.1.388.14.3.2.1.14.4.1.2 |
wsCcRfWlanWmmViParmParameters for the Video QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw WlanWmmConfig .1.3.6.1.4.1.388.14.3.2.1.14.4.1.3 |
wsCcRfWlanWmmVoParmParameters for the Voice QoS category of traffic in an 802.11e network. Prior to setting this field, please be sure to get the current value.rw WlanWmmConfig .1.3.6.1.4.1.388.14.3.2.1.14.4.1.4 |
wsCcRfWlanCountthe current number of wlan in the systemro INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.5 |
wsCcRfWlanClientIncludeListTableConfiguration for Include lists and hosts. The host entries existing in this list will go through NAC check if this client include list name is added into WLAN. SEQUENCE OF WsCcRfWlanClientIncludeListEntry .1.3.6.1.4.1.388.14.3.2.1.14.6 |
wsCcRfWlanClientIncludeListEntryInclude list and host entry contains information about host mac address and mac mask to include for NAC status check. WsCcRfWlanClientIncludeListEntry .1.3.6.1.4.1.388.14.3.2.1.14.6.1 |
wsCcRfWlanClientIncludeListNameIndexed by Include List Names.ro DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.6.1.1 |
wsCcRfWlanClientIncludeListHostNameString index of Mu host names for the WlanClientIncludeListTable.ro DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.6.1.2 |
wsCcRfWlanClientIncludeListMACHost MAC address. This is a MAC address of the Mobile Units. Example: 00:0A:12:34:BE:OFrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.6.1.3 |
wsCcRfWlanClientIncludeListMACMaskHost end MAC address. This field is used to specify the range of MAC addresses. Example: 00:0A:12:34:BE:FFrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.6.1.4 |
wsCcRfWlanClientIncludeListRowStatusCreate or Delete a row from Include list Table.rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.14.6.1.5 |
wsCcRfWlanClientExcludeListTableConfiguration for Exclude lists and hosts. The host entries existing in this list will not go through NAC check if its associated to the particular WLAN. SEQUENCE OF WsCcRfWlanClientExcludeListEntry .1.3.6.1.4.1.388.14.3.2.1.14.7 |
wsCcRfWlanClientExcludeListEntryExclude list and host entry contains information about host mac address and mac mask to exclude from NAC operation. WsCcRfWlanClientExcludeListEntry .1.3.6.1.4.1.388.14.3.2.1.14.7.1 |
wsCcRfWlanClientExcludeListNameIndexed by Exclude List Names.ro DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.7.1.1 |
wsCcRfWlanClientExcludeListHostNameString index of Mu host names for the WlanClientExcludeListTable.ro DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.7.1.2 |
wsCcRfWlanClientExcludeListMACHost MAC address. This is a MAC address of the Mobile Units. Example: 00:0A:12:34:BE:OFrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.7.1.3 |
wsCcRfWlanClientExcludeListMACMaskHost end MAC address. This field is used to specify the range of MAC addresses. Example: 00:0A:12:34:BE:FFrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.7.1.4 |
wsCcRfWlanClientExcludeListRowStatusCreate or Delete a row from Exclude list Table.rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.14.7.1.5 |
wsCcRfWlanClientListWlanMapTableConfigure wlan mapping for this client list. The list could be include or exclude list name. SEQUENCE OF WsCcRfWlanClientListWlanMapEntry .1.3.6.1.4.1.388.14.3.2.1.14.8 |
wsCcRfWlanClientListWlanMapEntryThis table will allow the user to associate client exclude and include lists to each WLAN. WsCcRfWlanClientListWlanMapEntry .1.3.6.1.4.1.388.14.3.2.1.14.8.1 |
wsCcRfWlanClientListNameClient exclude and include list name(s). This is a read only index which will display all the exclude and include list names created before (in wsCcRfWlanClientIncludeListTable and wsCcRfWlanClientExcludeListTable).ro DisplayString .1.3.6.1.4.1.388.14.3.2.1.14.8.1.1 |
wsCcRfWlanClientListWlanBitmapAdding client list (include and exclude list) to wlan(s). This is bitmap value (which is from 1 to maximum wlans ie., 1-256).rw MultiPointer256 .1.3.6.1.4.1.388.14.3.2.1.14.8.1.2 |
wsCcRfWlanVlanTableTable of Vlans assigned to parent Wlan SEQUENCE OF WsCcRfWlanVlanEntry .1.3.6.1.4.1.388.14.3.2.1.14.9 |
wsCcRfWlanVlanEntryAn entry in wsCcRfWlanVlanTable WsCcRfWlanVlanEntry .1.3.6.1.4.1.388.14.3.2.1.14.9.1 |
wsCcRfWlanVlanIndexThe numeric vlan ID for this vlan entry, valid range is [ 1, 4094 ].ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.9.1.1 |
wsCcRfWlanVlanUserLimitThe maximum number of users that can be associated on this VLAN of the WLAN. The value 0 has a special meaning. It means no limit on this VLAN of the WLAN. Other limits, such as maximum number of users per radio, etc, would still apply. Also, the maximum number of users is limited by the maximum number of MUs supported by the wireless switch e.g. 4096 for WS5100, 8192 for RFS7000. The range given here is the upper limit for any WiOS platform.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.14.9.1.2 |
wsCcRfWlanVlanRowStatusAt the time of row-creation, rowStatus is set to createAndGo(4). If user does not wish to have this vlanIndex mapped to a WLAN any more, user deletes the row by setting rowstatus to destroy(6). When a walk is done on this table, it will show one row for each vlan-wlan mapping and the rowStatus of all those rows will be active(1).rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.14.9.1.3 |
wsCcRfWlanMaxVlansMaximum number of vlans per wlan.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.14.10 |
wsCcRfWlanVlanLastErrorThe last error message on vlan table operation. It is not cleared.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.11 |
wsCcRfWlanBwAllocationEnableEnables or Disables Wlan Bandwidth Allocation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.14.13 |
wsCcRfAssocAcl OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.15 |
wsCcRfMuAssocAclTableA table that allows users to filter MUs that are allowed/denied association to different WLANs based on their MAC address SEQUENCE OF WsCcRfMuAssocAclEntry .1.3.6.1.4.1.388.14.3.2.1.15.1 |
wsCcRfMuAssocAclEntry WsCcRfMuAssocAclEntry .1.3.6.1.4.1.388.14.3.2.1.15.1.1 |
wsCcRfMuAssocAclIndexSimple index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.15.1.1.1 |
wsCcRfMuAssocAclModeAllow or deny the Mac range specified by wsCcRfWlanMuAclStartingMac and wsCcRfWlanMuAclEndingMac.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.15.1.1.2 |
wsCcRfMuAssocAclStartingMacStarting MAC address in a range or addresses.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.15.1.1.3 |
wsCcRfMuAssocAclEndingMacEnding MAC address in a range of addresses.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.15.1.1.4 |
wsCcRfMuAssocAclWlansThe list of WLANs that this ACL rule applies torw MultiPointer64 .1.3.6.1.4.1.388.14.3.2.1.15.1.1.5 |
wsCcRfMuAssocAclRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.15.1.1.6 |
wsCcRfRap OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.16 |
wsCcRfRapModeEnable/disable rogue AP detectionrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.16.1 |
wsCcRfRapMaxRogueThe maximum number of rows in wsCcRfRapStatusTablerwdeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.2 |
wsCcRfRapTimeoutThe amount of time a rogue AP will remain after it is no longer seenrwdeprecated Integer32 UNITS "second" .1.3.6.1.4.1.388.14.3.2.1.16.3 |
wsCcRfRapCfgTableConfigure rogue-ap (ap-detection) parameter SEQUENCE OF WsCcRfRapCfgEntry .1.3.6.1.4.1.388.14.3.2.1.16.4 |
wsCcRfRapCfgEntry WsCcRfRapCfgEntry .1.3.6.1.4.1.388.14.3.2.1.16.4.1 |
wsCcRfRapCfgIndexSimple indexro Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.4.1.1 |
wsCcRfRapCfgAnyMacany Mac addressrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.4.1.2 |
wsCcRfRapCfgMacMac addressrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.4.1.3 |
wsCcRfRapCfgAnySsidAny ssidrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.4.1.4 |
wsCcRfRapCfgSsidssidrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.4.1.5 |
wsCcRfRapCfgRowStatusRow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.4.1.6 |
wsCcRfRapStatusTableStatus of AP assisted approved and un-approved access ports SEQUENCE OF WsCcRfRapStatusEntry .1.3.6.1.4.1.388.14.3.2.1.16.5 |
wsCcRfRapStatusEntry WsCcRfRapStatusEntry .1.3.6.1.4.1.388.14.3.2.1.16.5.1 |
wsCcRfRapStatusTypeRadio type.ro Enumeration .1.3.6.1.4.1.388.14.3.2.1.16.5.1.1 |
wsCcRfRapStatusMacMac address of the access portro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.5.1.2 |
wsCcRfRapStatusHeardApIndex of the heard access portro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.5.1.3 |
wsCcRfRapStatusChannelChannel of heard radioro Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.5.1.4 |
wsCcRfRapStatusSsidSsid of heard radioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.5.1.5 |
wsCcRfRapStatusLastTimeSeenThe number of second(s) ago this ap was last seen.ro TimeTicks UNITS "second(s)" .1.3.6.1.4.1.388.14.3.2.1.16.5.1.6 |
wsCcRfRapStatusLastSignalLast signal level from the radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.14.3.2.1.16.5.1.7 |
wsCcRfRapStatusMinSignalWeakest signal heard from this radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.14.3.2.1.16.5.1.8 |
wsCcRfRapStatusMaxSignalStrongest signal heard from this radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.14.3.2.1.16.5.1.9 |
wsCcRfRapStatusSumSignalSum of all signal values for this radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.14.3.2.1.16.5.1.10 |
wsCcRfRapStatusSignalCountNumber of signal data points for this radio.ro Counter32 .1.3.6.1.4.1.388.14.3.2.1.16.5.1.11 |
wsCcRfRapMuAssistModeEnable mobile-unit assisted scanningrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.16.6 |
wsCcRfRapMuAssistRefreshPeriodThe period in seconds with which all scan-capable mobile-units are requested to scan for neighboring APsrw INTEGER .1.3.6.1.4.1.388.14.3.2.1.16.7 |
wsCcRfRUnpprovedApTimeoutThe amount of time an unapproved AP will remain after it is no longer seenrw INTEGER .1.3.6.1.4.1.388.14.3.2.1.16.8 |
wsCcRfRApprovedApTimeoutThe amount of time an approved AP will remain after it is no longer seenrw INTEGER .1.3.6.1.4.1.388.14.3.2.1.16.9 |
wsCcRfRapMuAssistTableStatus of MU assisted un-approved access ports SEQUENCE OF WsCcRfRapMuAssistEntry .1.3.6.1.4.1.388.14.3.2.1.16.10 |
wsCcRfRapMuAssistEntryDescription. WsCcRfRapMuAssistEntry .1.3.6.1.4.1.388.14.3.2.1.16.10.1 |
wsCcRfRapMuAssistIndexSimple index of approved and unapproved APsro INTEGER .1.3.6.1.4.1.388.14.3.2.1.16.10.1.1 |
wsCcRfRapMuAssistMacMAC address of the access portro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.10.1.2 |
wsCcRfRapMuAssistFoundOnPrtlPortal with which the MU is associatedro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.10.1.3 |
wsCcRfRapMuAssistTimestampTimestamp at which the radio was last heardro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.10.1.4 |
wsCcRfRapMuAssistSsidSsid of heard radioro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.10.1.5 |
wsCcRfRapMuAssistBssBss of the heard radioro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.10.1.6 |
wsCcRfRapMuAssistRssiRSSI of the heard radioro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.10.1.7 |
wsCcRfRapLocationing OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.16.11 |
wsCcRfRapLocationingTableThis table gives locationing information about the rogue APs SEQUENCE OF WsCcRfRapLocationingEntry .1.3.6.1.4.1.388.14.3.2.1.16.11.1 |
wsCcRfRapLocationingEntryAn entry in the rogue AP locationing table WsCcRfRapLocationingEntry .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1 |
wsCcRfRapLocationingIndexIndex of the rowro INTEGER .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.1 |
wsCcRfRapLocationingAPMacMAC address of the rogue APro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.2 |
wsCcRfRapLocationingRadioMacMAC address of the radio which heard this rogue AP beaconro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.3 |
wsCcRfRapLocationingSignalStrengthSignal Strength in dBm of the beacon from the rogue APro Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.4 |
wsCcRfRapLocationingHeardChannelChannel on which the beacon from the rogue AP was heardro Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.5 |
wsCcRfRapLocationingHeardTimeTime in timeticks (since boot) when the rogue AP beacon was heardro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.16.11.1.1.6 |
wsCcRfRapLocationingEnableEnable/Disable rogue AP locationingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.11.2 |
wsCcRfRapLocationingMaxRapMaximum number of Rogue APs in the table.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.11.3 |
wsCcRfRapLocationingScanIntervalTime interval between two scans in secondsrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.11.4 |
wsCcRfRapLocationingScanTimeDuration (dwell time) of scan in millisecondsrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.11.5 |
wsCcRfRapLocationingChannelSetForRadioAChannel Set for 802.11a radiorw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.11.6 |
wsCcRfRapLocationingChannelSetForRadioBGChannel Set for 802.11bg radiorw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.11.7 |
wsCcRfRapLocationingNumRapCurrent number of Rogue APs in the table.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.16.11.8 |
wsCcRfRapLocationingClearErase the contents of rogue AP locationing tablerw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.16.11.9 |
wsCcRfRapContainment OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.16.12 |
wsCcRfRapContainmentEnableEnable Rogue AP Containmentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.12.1 |
wsCcRfRapContainmentIntervalSet the interval for broadcast 802.11 de-authentication.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.12.2 |
wsCcRfRapContainmentTableThe table of Rogue AP (MACs) configured for Containment, SEQUENCE OF WsCcRfRapContainmentEntry .1.3.6.1.4.1.388.14.3.2.1.16.12.3 |
wsCcRfRapContainmentEntryEntries in the Rogue AP Containment Table WsCcRfRapContainmentEntry .1.3.6.1.4.1.388.14.3.2.1.16.12.3.1 |
wsCcRfRapContainmentIndexRogue AP Containment Table Indexro INTEGER .1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.1 |
wsCcRfRapContainmentRogueMacBSS MAC of the Rogue AP which is to be Contained.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.2 |
wsCcRfRapContainmentFinderCountIndicates the number of finders for a Rogue AP. A Rogue AP report may time out, or the Rogue AP can move to the Approved list. In either case, Containment shall stop for that particular Rogue AP.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.3 |
wsCcRfRapContainmentRowStatusRow Status (for Rogue AP Containment Table)rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.4 |
wsCcRfRapContainmentReportedChannelChannel on which the Rogue Access Point is reported.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.16.12.3.1.5 |
wsCcRfIds OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.17 |
wsCcRfIdsMaxExcsvAssocMonitor the number of association requests from mobile- units.rwdeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.1 |
wsCcRfIdsMaxExcsvProbesMonitor the number of probe requests from mobile-units.rwdeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.2 |
wsCcRfIdsMuFilterAgeOutSet the number of seconds to filter a mobile-unit that set off IDSrwdeprecated Integer32 UNITS "seconds" .1.3.6.1.4.1.388.14.3.2.1.17.3 |
wsCcRfIdsMax OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.17.4 |
wsCcRfIdsMaxExcsvAssosSet the limit on the number of association requests from mobile-units.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.4.1 |
wsCcRfIdsMaxExcsvProbsSet the limit on the number of probe requests from mobile-units.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.4.2 |
wsCcRfIdsMaxExcsvDisassosSet the limit on the number of disassociation requests from mobile-units.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.4.3 |
wsCcRfIdsMaxExcsvAuthFailuresSet the limit on the number of authentication failures in mobile-units.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.4.4 |
wsCcRfIdsMaxExcsvCryptoReplaysSet the limit on the number of crypto replays in mobile-units.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.4.5 |
wsCcRfIdsMaxExcsv80211ReplaysSet the limit on the number of 802.11 replays in mobile-units.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.4.6 |
wsCcRfIdsMaxExcsvDecryptFailsSet the limit on the number of decryption failures in mobile-units.rwdeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.4.7 |
wsCcRfIdsAnmly OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.17.5 |
wsCcRfIdsAnmlySrcMacEqDestMacWhen enabled, it carries out anomaly detection where source and destination MAC addresses are same in the frame.rwdeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.17.5.1 |
wsCcRfIdsAnmlyNullDestinationWhen enabled, it carries out anomaly detection where the destination MAC is NULL.rwdeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.17.5.2 |
wsCcRfIdsAnmlySrcMulticastMacWhen enabled, it carries out anomaly detection where the source MAC address in the frame is a multicast address.rwdeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.17.5.3 |
wsCcRfIdsAnmlyWeakWepIvWhen enabled, it detects the out anomaly where the WEP IV is weak.rwdeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.17.5.4 |
wsCcRfIdsStatusFilteredMacMaxSet the maximum number of MACs to be filtered for IDS.rodeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.6 |
wsCcRfIdsMuFilterAgeOutTimeSet the number of seconds to filter a mobile-unit that set off IDSrwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.7 |
wsCcRfIdsStatusTableA table to track WIDS status for each filtered MAC. SEQUENCE OF WsCcRfIdsStatusEntry .1.3.6.1.4.1.388.14.3.2.1.17.8 |
wsCcRfIdsStatusEntryAn entry in the wsCcRfIdsStatusTable WsCcRfIdsStatusEntry .1.3.6.1.4.1.388.14.3.2.1.17.8.1 |
wsCcRfIdsStatusViolatnIndexThe index for this table which tells about at most 100 most recent violations.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.8.1.1 |
wsCcRfIdsStatusFilteredMuMacThe MAC address of the mobile-unit which is being filtered for WIDS.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.17.8.1.2 |
wsCcRfIdsStatusViolatnTypeThe specific violation type done by the MU, whether a threshold was crossed or an anomaly was detected.ro IdsViolationType .1.3.6.1.4.1.388.14.3.2.1.17.8.1.3 |
wsCcRfIdsStatusRadioIndexThe radio index where this violation occured.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.8.1.4 |
wsCcRfIdsStatusRemainingBlacklistTimeThe remaining blacklist time for this mobile-unit which had a WIDS violation.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.17.8.1.5 |
wsCcRfIdsStatusRowStatusThe row status for this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.17.8.1.6 |
wsCcRfIdsEventTableAn entry in the wsCcRfIdsEventTable SEQUENCE OF WsCcRfIdsEventEntry .1.3.6.1.4.1.388.14.3.2.1.17.9 |
wsCcRfIdsEventEntryAn entry in the wsCcRfMuIdsTable. WsCcRfIdsEventEntry .1.3.6.1.4.1.388.14.3.2.1.17.9.1 |
wsCcRfIdsEventRadioIndexThe radio index where this event last occured.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.9.1.1 |
wsCcRfIdsEventTypeThe event type, which is the index for this table. There are eleven event types enumerated so far and hence this table has eleven rows.ro IdsViolationType .1.3.6.1.4.1.388.14.3.2.1.17.9.1.2 |
wsCcRfIdsEventLastOccurredTimeTimeticks since the last occurence of this event.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.17.9.1.3 |
wsCcRfIdsEventTotalCountThe total count of how many times a given type of event has occurred in the switch.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.9.1.4 |
wsCcRfIdsEventCountSinceMidnightA count of how many times a given type of event has occurred in the switch since midnight i.e. 00:00:00 hours.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.9.1.5 |
wsCcRfIdsClearMuIdsEventEntriesA scalar to reset all entries in the wsCcRfIdsMuEventTable to 0rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.17.10 |
wsCcRfIdsEventPeriodThe period of time, in seconds, over which the IDS events are observed to check if they exceeded the threshold. For example if this value is set as 5 seconds, the threshold for, say, excessive authentication failures can be, say, 100 event detections per 5 second interval.rwdeprecated INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.11 |
wsCcRfIdsDetectionWindowNumber of seconds for detection.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.17.12 |
wsCcRfIdsThresholdsTableThresholds and filter-ageout for each violation type. SEQUENCE OF WsCcRfIdsThresholdsEntry .1.3.6.1.4.1.388.14.3.2.1.17.13 |
wsCcRfIdsThresholdsEntryAn entry in the wsCcRfIdsThresholdsTable. WsCcRfIdsThresholdsEntry .1.3.6.1.4.1.388.14.3.2.1.17.13.1 |
wsCcRfIdsThresholdsViolTypeIndexDescription.rw IdsViolationType .1.3.6.1.4.1.388.14.3.2.1.17.13.1.1 |
wsCcRfIdsThresholdsMuMU threshold for violation type. Setting the value to 0 will disable the check.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.17.13.1.2 |
wsCcRfIdsThresholdsRadioRadio threshold for violation type. Setting the value to 0 will disable the check.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.17.13.1.3 |
wsCcRfIdsThresholdsSwitchSwitch threshold for violation type. Setting the value to 0 will disable the check.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.17.13.1.4 |
wsCcRfIdsThresholdsFilterAgeoutNumber of seconds to filter for violation type.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.17.13.1.5 |
wsCcRfIdsRadioIndexThe radio index where this event last occured.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.14 |
wsCcRfIdsViolationTypeThe specific type of the IDS violation has occured.ro IdsViolationType .1.3.6.1.4.1.388.14.3.2.1.17.15 |
wsCcRfIdsViolCountLastDetWindowThe number of IDS violations has occured in the last detection window.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.17.16 |
wsCcRfIdsBadEssidTableBad Essid Table. To be used for configuring bad essid frame anomaly detection in IDS feature. SEQUENCE OF WsCcRfIdsBadEssidEntry .1.3.6.1.4.1.388.14.3.2.1.17.17 |
wsCcRfIdsBadEssidEntryA bad essid string entry. Upto 10 are allowed. WsCcRfIdsBadEssidEntry .1.3.6.1.4.1.388.14.3.2.1.17.17.1 |
wsCcRfIdsBadEssidIndexIndex of the bad ESSID string.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.17.17.1.1 |
wsCcRfIdsBadEssidBad ESSID string.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.17.17.1.2 |
wsCcRfIdsBadEssidRowStatusRow status: only createAndGo(4) and delete(6) are supported.rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.17.17.1.3 |
wsCcRfSelfHealing OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.18 |
wsCcRfSelfHealingNeighborRecoveryEnableEnable/Disable monitoring of APs and attempt to increase coverage on failure.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.18.1 |
wsCcRfSelfHealingDetectNeighborNowDisassociate all MUs, clear current neigbors and run a neighbor detectionrw DoActionShowProgress .1.3.6.1.4.1.388.14.3.2.1.18.2 |
wsCcRfSelfHealingInterferenceAvoidanceEnableEnable/disable interference avoidance.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.18.3 |
wsCcRfSelfHealingInterferenceAvoidanceRetriesx10The average number retries (x10) to cause a radio to re-run auto channel selection.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.4 |
wsCcRfSelfHealingInterferenceAvoidanceHoldTimeThe number of seconds to disable interference avoidance after a detection. This prevents a radio from changing channels continuously.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.5 |
wsCcRfSelfHealingNeighborRadioTableThis table stores radio neighbor information. SEQUENCE OF WsCcRfSelfHealingNeighborRadioEntry .1.3.6.1.4.1.388.14.3.2.1.18.6 |
wsCcRfSelfHealingNeighborRadioEntry WsCcRfSelfHealingNeighborRadioEntry .1.3.6.1.4.1.388.14.3.2.1.18.6.1 |
wsCcRfSelfHealingNeighborRadioIndicesIndices of Neighbor Radios. field octets contents range ----- ------ -------- ----- 1 1-2 Count of indices 0..16 2-17 3-34 Neighbor Radio Indices 0..4096 for each index ---------------------------------------------------------------------------------- | Count (2 octets) | Neighbor Radio Indices ( 2 octets times 16 occurrences | ---------------------------------------------------------------------------------- All octets are in network byte order. Definition of contents: Count of indices: The number of Neighbor Radio Indices following. Neighbor Radios Indices: Each Neighbor Radios Index takes 2 octets. There are 16 Neighbor Radio Indices. Unused Neighbor Radios Indices will have the value zero.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.18.6.1.1 |
wsCcRfSelfHealingMonitoringTabledeprecated SEQUENCE OF WsCcRfSelfHealingMonitoringEntry .1.3.6.1.4.1.388.14.3.2.1.18.7 |
wsCcRfSelfHealingMonitoringEntrydeprecated WsCcRfSelfHealingMonitoringEntry .1.3.6.1.4.1.388.14.3.2.1.18.7.1 |
wsCcRfSelfHealingMonitoringTransRadioIndex of transmitting radio.rodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.1 |
wsCcRfSelfHealingMonitoringRecvRadioIndex of receiving Radio.rodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.2 |
wsCcRfSelfHealingMonitoringChannelMonitoring channelrodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.3 |
wsCcRfSelfHealingMonitoringLastTimeThe time of the last beacon heardrodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.14.3.2.1.18.7.1.4 |
wsCcRfSelfHealingMonitoringLastSignalThe dBm signal value of the last beacon heardrodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.5 |
wsCcRfSelfHealingMonitoringMinSigThe lowest dBm signal value heardrodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.6 |
wsCcRfSelfHealingMonitoringMaxSigThe highest dBm signal value heardrodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.7 |
wsCcRfSelfHealingMonitoringSumSigThe sum of all signal values heardrodeprecated Integer32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.8 |
wsCcRfSelfHealingMonitoringNumSigThe number of signal values heardrodeprecated Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.18.7.1.9 |
wsCcRfHotspot OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.19 |
wsCcRfHotspotTableConfigure hotspot related parameters. SEQUENCE OF WsCcRfHotspotEntry .1.3.6.1.4.1.388.14.3.2.1.19.1 |
wsCcRfHotspotEntry WsCcRfHotspotEntry .1.3.6.1.4.1.388.14.3.2.1.19.1.1 |
wsCcRfHotspotServerIp1Primary Radius server ip for hotspot authentication.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.19.1.1.1 |
wsCcRfHotspotServerPort1Primary Radius server port for hotspot authentication.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.19.1.1.2 |
wsCcRfHotspotServerSecret1Primary Radius server shared secret for hotspot authentication.rw Password .1.3.6.1.4.1.388.14.3.2.1.19.1.1.3 |
wsCcRfHotspotServerIp2Secondary Radius server ip for hotspot authentication.rw IpAddress .1.3.6.1.4.1.388.14.3.2.1.19.1.1.4 |
wsCcRfHotspotServerPort2Secondary Radius server port for hotspot authentication.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.19.1.1.5 |
wsCcRfHotspotServerSecret2Secondary Radius server shared secret for hotspot authentication.rw Password .1.3.6.1.4.1.388.14.3.2.1.19.1.1.6 |
wsCcRfHotspotServerRetriesNumber of retries the wireless switch initiates before giving uprw Integer32 .1.3.6.1.4.1.388.14.3.2.1.19.1.1.7 |
wsCcRfHotspotServerTimeoutTime the wireless switch waits for a response from the radius server before retryingrw Integer32 .1.3.6.1.4.1.388.14.3.2.1.19.1.1.8 |
wsCcRfHotspotPageLocationThe location of the webpages to be used for authentication. These pages can either be hosted on the wireless switch or on an external web serverrwdeprecated Enumeration .1.3.6.1.4.1.388.14.3.2.1.19.1.1.9 |
wsCcRfHotspotWebsiteTypeThe website type to be used for authentication. The website can either be hosted on the wireless switch or on an external web serverrw Enumeration .1.3.6.1.4.1.388.14.3.2.1.19.1.1.10 |
wsCcRfHotspotModeThe hotspot mode for a WLAN. This should be set to 'webPortalBased' to use customer-specific portal.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.19.1.1.11 |
wsCcRfHotspotLogoutOnCloseThis property allows end user to enable/disable user logout on browser close event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.19.1.1.12 |
wsCcRfHotspotMaxLoginAttemptsThis property allows end user to specify Maximum login attempts that can be allowed before user is denied any access.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.19.1.1.13 |
wsCcRfHotspotRedirectToHostNameEnable or disable the use of hostname/System-Name in the redirection URL instead of the IP address of the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.19.1.1.14 |
wsCcRfHotspotSimultaneousUsersThe number of MAC addresses that are allowed to use same username at the same time in hotspotrw INTEGER .1.3.6.1.4.1.388.14.3.2.1.19.1.1.15 |
wsCcRfHotspotPageTableConfigure hotspot page parameters SEQUENCE OF WsCcRfHotspotPageEntry .1.3.6.1.4.1.388.14.3.2.1.19.2 |
wsCcRfHotspotPageEntry WsCcRfHotspotPageEntry .1.3.6.1.4.1.388.14.3.2.1.19.2.1 |
wsCcRfHotspotPageTypeHotspot page typero Enumeration .1.3.6.1.4.1.388.14.3.2.1.19.2.1.1 |
wsCcRfHotspotIntPageTitleAscii string that will be in the title of the webpage.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.2 |
wsCcRfHotspotIntPageHeaderAscii string that is displayed as a header. (large font, top section) of the webpage.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.3 |
wsCcRfHotspotIntPageDescrAscii string that is displayed as the main body (normal font, middle of page) of the webpagerw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.4 |
wsCcRfHotspotIntPageFooterAscii string that is displayed at the footer (smaller font, bottom section) of the webpagerw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.5 |
wsCcRfHotspotIntPageImgUrl1main image( large size) that will be served up by the local webpage. Appears between the header and description on the webpage.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.6 |
wsCcRfHotspotIntPageImgUrl2Small image (thumbnail size) that will be served up by the local webpage. Appears near the footer on the webpage.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.7 |
wsCcRfHotspotExtPageUrlUrl of external pagerw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.19.2.1.8 |
wsCcRfHotspotWhiteIpTableConfigure hotspot white list parameters. Users who have not yet authenticated will be allowed access to these IP addresses SEQUENCE OF WsCcRfHotspotWhiteIpEntry .1.3.6.1.4.1.388.14.3.2.1.19.3 |
wsCcRfHotspotWhiteIpEntry WsCcRfHotspotWhiteIpEntry .1.3.6.1.4.1.388.14.3.2.1.19.3.1 |
wsCcRfHotspotWhiteIpRuleIndexrule indexro Integer32 .1.3.6.1.4.1.388.14.3.2.1.19.3.1.1 |
wsCcRfHotspotWhiteIpAddrWhite-list IP addressrw IpAddress .1.3.6.1.4.1.388.14.3.2.1.19.3.1.2 |
wsCcRfQos OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.20 |
wsCcRfQosAcTo802dot1pTableThe mapping of access categories to 802.1p priorities. SEQUENCE OF WsCcRfQosAcTo802dot1pEntry .1.3.6.1.4.1.388.14.3.2.1.20.1 |
wsCcRfQosAcTo802dot1pEntryA single mapping of an access category to 802.1p priority. WsCcRfQosAcTo802dot1pEntry .1.3.6.1.4.1.388.14.3.2.1.20.1.1 |
wsCcRfQosAcTo802dot1pAccessCategoryAn access category.ro TrafficIdentifier .1.3.6.1.4.1.388.14.3.2.1.20.1.1.1 |
wsCcRfQosAcTo802dot1pPriorityAn 802.1p priority tag.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.20.1.1.2 |
wsCcRfQos802dot1pToAcTableThe mapping of 802.1p priorities to access categories . SEQUENCE OF WsCcRfQos802dot1pToAcEntry .1.3.6.1.4.1.388.14.3.2.1.20.2 |
wsCcRfQos802dot1pToAcEntryA single mapping of an 802.1p priority to an access category. WsCcRfQos802dot1pToAcEntry .1.3.6.1.4.1.388.14.3.2.1.20.2.1 |
wsCcRfQos802dot1pToAcIndexA simple sequential index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.20.2.1.1 |
wsCcRfQos802dot1pToAcPriorityAn 802.1p priority tag.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.20.2.1.2 |
wsCcRfQos802dot1pToAcAccessCategoryAn access category.rw TrafficIdentifier .1.3.6.1.4.1.388.14.3.2.1.20.2.1.3 |
wsCcRfQosDscpToAcTableThe mapping of DSCP values to access categories. SEQUENCE OF WsCcRfQosDscpToAcEntry .1.3.6.1.4.1.388.14.3.2.1.20.3 |
wsCcRfQosDscpToAcEntryA single mapping of a DSCP value to an access category. WsCcRfQosDscpToAcEntry .1.3.6.1.4.1.388.14.3.2.1.20.3.1 |
wsCcRfQosDscpToAcIndexA simple sequential index.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.20.3.1.1 |
wsCcRfQosDscpToAcDscpA DSCP value.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.20.3.1.2 |
wsCcRfQosDscpToAcAccessCategoryAn access category.rw TrafficIdentifier .1.3.6.1.4.1.388.14.3.2.1.20.3.1.3 |
wsCcRfWiredWebAuth OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.21 |
wsCcRfWiredWebAuthEnableEnabling of wired web authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.21.1 |
wsCcRfWiredWebAuthVlanAssignment of VLAN to the wired web authentication.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.21.2 |
wsCcRfWiredWebAuthWlanAssignment of WLAN to the wired web authentication.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.21.3 |
wsCcRfWiredWebAuthHostEntryDeleteDescription.Use this object to remove an entry in wsCcRfWiredWebAuthHostTable.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.21.4 |
wsCcRfWiredWebAuthHostTableDescription. SEQUENCE OF WsCcRfWiredWebAuthHostEntry .1.3.6.1.4.1.388.14.3.2.1.21.5 |
wsCcRfWiredWebAuthHostEntryDescription. WsCcRfWiredWebAuthHostEntry .1.3.6.1.4.1.388.14.3.2.1.21.5.1 |
wsCcRfWiredWebAuthHostIndexDescription. The index for the wsCcRfWiredWebAuthHostTable.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.21.5.1.1 |
wsCcRfWiredWebAuthHostMacDescription.The Mac Address of this wsCcRfWiredWebAuthHostEntryro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.21.5.1.2 |
wsCcRfWiredWebAuthHostIpDescription. The IP address of this wsCcRfWiredWebAuthHosEntryro IpAddress .1.3.6.1.4.1.388.14.3.2.1.21.5.1.3 |
wsCcRfWiredWebAuthHostStateDescription.The current state of this wsCcRfWiredWebAuthHostEntryro Enumeration .1.3.6.1.4.1.388.14.3.2.1.21.5.1.4 |
wsCcRfWiredWebAuthHostVlanDescription.The Vlan assigned to this wsCcRfWiredWebAuthHostEntryro Integer32 .1.3.6.1.4.1.388.14.3.2.1.21.5.1.5 |
wsCcRfLldp OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.22 |
wsCcRfLldpNameLLDP friendly name to be used in LLDP for adopted radio-ports.rw DisplayString .1.3.6.1.4.1.388.14.3.2.1.22.1 |
wsCcRfLldpApMacAddrThe Mac address to be associated with LLDP friendly name.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.22.2 |
wsCcRfLldpNameSetConfigure the LLDP friendly name to be used in LLDP for adopted radio-ports. If wsCcRfLldpApMacAddr is not specified, the LLDP friendly name update will be sent to all currently adpoted radio ports.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.22.3 |
wsCcRfLastAlarmEventAn event which could be one of the following: AP shut down AP channel configuration is changed Interference on current channel is detected Radius authentication server is unreachable/unavailable/unconnected Radius accounting server cannot be connected Portal server is unavailable AP is disconnected from the networkro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.23 |
wsCcRfApExt OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.24 |
wsCcRfApExtTableDescription. SEQUENCE OF WsCcRfApExtEntry .1.3.6.1.4.1.388.14.3.2.1.24.1 |
wsCcRfApExtEntryDescription. WsCcRfApExtEntry .1.3.6.1.4.1.388.14.3.2.1.24.1.1 |
wsCcRfApExtApMacDescription.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.24.1.1.1 |
wsCcRfApExtNetMaskThe network mask of this Access port.ro IpAddress .1.3.6.1.4.1.388.14.3.2.1.24.1.1.2 |
wsCcRfApExtTotalInterfacesThe total number of physical interfaces of this Access port.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.24.1.1.3 |
wsCcRfApExtApNameThe name of the AP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.24.1.1.4 |
wsCcRfApExtApLocationThe location of the AP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.24.1.1.5 |
wsCcRfApExtSecureModeSecretConfigure a shared secret for an AP.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.24.1.1.6 |
wsCcRfApExtSecureModeEnableConfigure secured mode for this AP. If secure-mode is set to enable it means that the WISP-e for this AP will be secured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.24.1.1.7 |
wsCcRfApExtSecureModeStagingEnableConfigure secure mode staging to an AP. In this mode the switch will send configured shared secret in the clear in the Join response to the AP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.24.1.1.8 |
wsCcRfApExtSecureWispeDefSecretConfigure default shared secret for secure wisp-e.rw OCTET STRING .1.3.6.1.4.1.388.14.3.2.1.24.2 |
wsCcRfSwitchManufacturerThe manufacturer of the switch or AC (access controller)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.25 |
wsCcRfApConvert OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.26 |
wsCcRfApConvertIndexThe valid AP index to be converted.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.26.1 |
wsCcRfApConvertTypeConvert AP to default or sensor.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.26.2 |
wsCcRfApConvertActionBoth wsCcRfApConvertIndex and wsCcRfApConvertType should be properly set before setting this object.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.26.3 |
wsCcRfSensor OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.27 |
wsCcRfSensorRevert OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.27.1 |
wsCcRfSensorRevertIndexThe valid sensor index to be reverted to AP.rw Integer32 .1.3.6.1.4.1.388.14.3.2.1.27.1.1 |
wsCcRfSensorRevertActionwsCcRfSensorRevertIndex should be properly set before setting this object.rw Enumeration .1.3.6.1.4.1.388.14.3.2.1.27.1.2 |
wsCcRfSensorRevertVlanConfigure vlans where sensors are to be discovered. 0 indicates no vlans exists.rw INTEGER (0 | 1..4094) .1.3.6.1.4.1.388.14.3.2.1.27.1.3 |
wsCcRfSensorRevertSensorTableThis table contains a list of sensors that were previoulsy converted from APs. SEQUENCE OF WsCcRfSensorRevertSensorEntry .1.3.6.1.4.1.388.14.3.2.1.27.1.4 |
wsCcRfSensorRevertSensorEntryDescription. WsCcRfSensorRevertSensorEntry .1.3.6.1.4.1.388.14.3.2.1.27.1.4.1 |
wsCcRfSensorRevertSensorIndexThe sensor index.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.1 |
wsCcRfSensorRevertSensorMacThe physical address of this sensor.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.2 |
wsCcRfSensorRevertSensorVlanThe assinged Vlan ID for this sensor.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.3 |
wsCcRfSensorRevertSensorIpThe IP address of this sensor.ro IpAddress .1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.4 |
wsCcRfSensorRevertSensorLastHeardSeconds since last heard from the sensor.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.388.14.3.2.1.27.1.4.1.5 |
wsCcRfSensorCfg OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.27.2 |
wsCcRfSensorCfgWipsServerPrimaryIpThe primary IP address of the WIPS serverrw IpAddress .1.3.6.1.4.1.388.14.3.2.1.27.2.1 |
wsCcRfSensorCfgWipsServerSecondaryIpThe secondary IP address of the WIPS serverrw IpAddress .1.3.6.1.4.1.388.14.3.2.1.27.2.2 |
wsCcRfSmart OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.28 |
wsCcRfSmartEnable OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.28.1 |
wsCcRfSmartEnableSmartRFEnable or disable Smart-RF functionality.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.1 |
wsCcRfSmartEnableDetectorAssignEnable or disable automatic assignment of radio detectors.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.2 |
wsCcRfSmartEnableChannelAssignEnable or disable automatic assignment of channels to working radios to avoid channel overlap and avoid interference from external RF sources.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.3 |
wsCcRfSmartEnablePowerAssignEnable or disable automatic assignment of transmit power.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.4 |
wsCcRfSmartEnableRescuerAssignEnable or disable automatic assignment of rescuers along with rescuing power.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.5 |
wsCcRfSmartEnableFaultyRadioRecoverEnable or disable monitoring for defective radio and self-healing by its rescuer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.6 |
wsCcRfSmartEnableInterferenceRecoverEnable or disable monitoring for interference and self-healing it by rescuer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.7 |
wsCcRfSmartEnableCoverageHoleRecoverEnable or disable monitoring and recovering for coverage hole.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.8 |
wsCcRfSmartEnableScheduledCalibrationEnable or disable scheduled Smart-RF calibration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.9 |
wsCcRfSmartEnableVerboseModeEnables or disables RF smart verbose mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.10 |
wsCcRfSmartEnableExtensiveScanModeEnables or disables RF smart extensive scan mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.1.11 |
wsCcRfSmartRadioTableTable of radio specific configuration for Smart-RF Management. SEQUENCE OF WsCcRfSmartRadioEntry .1.3.6.1.4.1.388.14.3.2.1.28.2 |
wsCcRfSmartRadioEntryAn entry in the table. WsCcRfSmartRadioEntry .1.3.6.1.4.1.388.14.3.2.1.28.2.1 |
wsCcRfSmartRadioMacThe MAC address of the radio.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.2.1.1 |
wsCcRfSmartRadioCfgIndexThe configuration index for this radio.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.28.2.1.2 |
wsCcRfSmartRadioEnableDetectorLockEnable or disable radio detector mode lock of this radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.2.1.3 |
wsCcRfSmartRadioEnableChannelLockEnable or disable channel lock of this radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.2.1.4 |
wsCcRfSmartRadioEnablePowerLockEnable or disable power lock of this radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.2.1.5 |
wsCcRfSmartRadioEnableRescuerLockEnable or disable rescuer lock of this radio.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.2.1.6 |
wsCcRfSmartRadioAntGainAntenna gain. Please see the definition of RadioAntennaGain for additional information.rw RadioAntennaGain UNITS "0.1dBm" .1.3.6.1.4.1.388.14.3.2.1.28.2.1.7 |
wsCcRfSmartRadioCovRateThe desired coverage rate.rw TransmitRate .1.3.6.1.4.1.388.14.3.2.1.28.2.1.8 |
wsCcRfSmartRadioSwichIpAddrThe IP Address of the switch this radio is adopted.ro IpAddress .1.3.6.1.4.1.388.14.3.2.1.28.2.1.9 |
wsCcRfSmartRadioCurrChannelThe current channel (may be different from configured channel due to DFS etc). A value of 0 for this object implies that the radio is not adopted.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.2.1.10 |
wsCcRfSmartRadioCurrPowerThe output power level for the radio in dBm. A value of 0 for this object implies that the radio is not adopted.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.28.2.1.11 |
wsCcRfSmartRadioRetryThrshldRetry threshold is the average number of retries per packet to cause a radio to re-run channel selection. The range in the CLI is 0.0 to 15.0. Since SNMP does not support decimal numbers, the range for this object is 0 to 150 and the set value would be divided by 10 by the smart-rf module.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.28.3 |
wsCcRfSmartRescuerTableTable to assign rescuers for radios. Up to 5 rescuers per radio can be assigned. SEQUENCE OF WsCcRfSmartRescuerEntry .1.3.6.1.4.1.388.14.3.2.1.28.4 |
wsCcRfSmartRescuerEntryAn entry in the table. WsCcRfSmartRescuerEntry .1.3.6.1.4.1.388.14.3.2.1.28.4.1 |
wsCcRfSmartRescuerMacRadio MAC of rescuer.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.4.1.1 |
wsCcRfSmartRescuerPowerBoostPower raised by the rescuer to cover the radio's coverage, if the radio becomes defective.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.4.1.2 |
wsCcRfSmartRescuerAttenuationAttenuation from the rescuer radio to this radio. This column is optional.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.4.1.3 |
wsCcRfSmartRescuerRowStatusThe Row status. All columns except wsCcRfSmartRescuerAttenuation must be supplied to create a row. The agent itself may also create and/or delete rows, when Smart-RF calibration runs.rw AbbrevRowStatus .1.3.6.1.4.1.388.14.3.2.1.28.4.1.4 |
wsCcRfSmartFaultyRadioNumRescuersNumber of rescuers to cover a faulty radio.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.5 |
wsCcRfSmartCalibration OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.28.6 |
wsCcRfSmartCalibrationSched OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.28.6.1 |
wsCcRfSmartCalibrationSchedStartTimeThe start-time of the Smart-RF Calibration schedule. It does not have to be a future time.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.6.1.1 |
wsCcRfSmartCalibrationSchedIntvlSmart-RF Calibration schedule interval.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.6.1.2 |
wsCcRfSmartCalibrationStartStart a new Smart-RF calibration. If calibration fails, wsCcRfSmartCalibrationLastFailedReason will have the reason.rw DoActionNow .1.3.6.1.4.1.388.14.3.2.1.28.6.2 |
wsCcRfSmartCalibrationLastFailedReasonLast calibration failed reason.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.6.3 |
wsCcRfSmartCalibrationStatusMessageA message giving the current status of the calibration being performed at the master switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.6.4 |
wsCcRfSmartStatus OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.28.7 |
wsCcRfSmartStatusLastCalStartTimeThe time the last Smart-RF calibration started.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.7.1 |
wsCcRfSmartStatusLastCalEndTimeThe time the last Smart-RF calibration ended.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.7.2 |
wsCcRfSmartStatusNextCalStartTimeThe time the next Smart-RF calibration starts.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.7.3 |
wsCcRfSmartStatusCurrOperThe current Smart-RF operation being done.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.7.4 |
wsCcRfSmartStatusAssignmentTableTable of Smart RF assignment history since last calibration. SEQUENCE OF WsCcRfSmartStatusAssignmentEntry .1.3.6.1.4.1.388.14.3.2.1.28.7.5 |
wsCcRfSmartStatusAssignmentEntryAn entry in the table. WsCcRfSmartStatusAssignmentEntry .1.3.6.1.4.1.388.14.3.2.1.28.7.5.1 |
wsCcRfSmartStatusAssignmentIndexThe assignment history sequence number.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.7.5.1.1 |
wsCcRfSmartStatusAssignmentEventSmart RF assignment event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.7.5.1.2 |
wsCcRfSmartMasterSwitchAddrThe IP address of the master switch. This information is obtained from the clustering daemon and is therefore read-only.ro IpAddress .1.3.6.1.4.1.388.14.3.2.1.28.7.6 |
wsCcRfSmartIsClusterMasterA boolean to represent whether this switch is the cluster master. This information is obtained from the clustering daemon and is therefore read-only.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.7.7 |
wsCcRfSmartScanDwellTimeRF smart scan dwell time.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.28.8 |
wsCcRfSmartRadioNeighborTableA table giving details of a radio's neighborhood information. SEQUENCE OF WsCcRfSmartRadioNeighborEntry .1.3.6.1.4.1.388.14.3.2.1.28.9 |
wsCcRfSmartRadioNeighborEntryAn entry in the neighbor table, indexed by a. the MAC address of the radio b. neighbor index c. tx power WsCcRfSmartRadioNeighborEntry .1.3.6.1.4.1.388.14.3.2.1.28.9.1 |
wsCcRfSmartRadioNeighborIndexNeighbor index.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.28.9.1.2 |
wsCcRfSmartRadioNeighborTxPowerTx power of the neighbor radio.ro INTEGER .1.3.6.1.4.1.388.14.3.2.1.28.9.1.3 |
wsCcRfSmartRadioNeighborCfgIdxConfiguration index of the neighbor radio, taken from its index in the wsCcRfRadioTable.ro Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.9.1.4 |
wsCcRfSmartRadioNeighborRxSignalRx signal strength of the neighbor radio for the given tx power.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.14.3.2.1.28.9.1.5 |
wsCcRfSmartRadioNeighborAttenuationAttenuation of the neighbor radio for the given tx power.ro Integer32 .1.3.6.1.4.1.388.14.3.2.1.28.9.1.6 |
wsCcRfSmartRadioNeighborMacThe MAC address of the neighbor radio.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.28.9.1.7 |
wsCcRfSmartPowerRangeLowerBoundLower bound of the transmit power range for automatic assignment.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.10 |
wsCcRfSmartPowerRangeHigherBoundHigher bound of the transmit power range for automatic assignment.rw Unsigned32 .1.3.6.1.4.1.388.14.3.2.1.28.11 |
wsCcRfSmartRadioHoldTimeThe number of seconds to disable interference avoidance after a detection. This prevents a radio from changing channels continuously.rw INTEGER .1.3.6.1.4.1.388.14.3.2.1.28.12 |
wsCcRfMasterSyncEnableEnables or disables the master-sync feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.29 |
wsCcRfChannelManager OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.30 |
wsCcRfChannelManagerTableA table where the smart-rf and smart-scan capability of each channel can be configured. SEQUENCE OF WsCcRfChannelManagerEntry .1.3.6.1.4.1.388.14.3.2.1.30.1 |
wsCcRfChannelManagerEntryAn entry in wsCcRfChannelManagerTable. WsCcRfChannelManagerEntry .1.3.6.1.4.1.388.14.3.2.1.30.1.1 |
wsCcRfChannelManagerChanChannel numberro INTEGER .1.3.6.1.4.1.388.14.3.2.1.30.1.1.1 |
wsCcRfChannelManagerSmartRfSelWhether smart RF is selected for this channel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.30.1.1.2 |
wsCcRfChannelManagerSmartScanSelWhether smart scan is selected for this channel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.30.1.1.3 |
wsCcRfSmartScanWlanMapTableA table giving the mapping of radio channels per WLAN with respect to their smart-scan capability. SEQUENCE OF WsCcRfSmartScanWlanMapEntry .1.3.6.1.4.1.388.14.3.2.1.30.2 |
wsCcRfSmartScanWlanMapEntryAn entry in the wsCcRfSmartScanWlanMapTable. WsCcRfSmartScanWlanMapEntry .1.3.6.1.4.1.388.14.3.2.1.30.2.1 |
wsCcRfSmartScanWlanMapWlanThe wlan number for the smart scan channel mapro INTEGER .1.3.6.1.4.1.388.14.3.2.1.30.2.1.1 |
wsCcRfSmartScanWlanMapSmartScanSelWhether smart scan is selected for this channel/wlan combination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.3.2.1.30.2.1.2 |
wsCcRfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.100 |
wsCcRfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.100.1 |
wsCcRfCompliance Unknown .1.3.6.1.4.1.388.14.3.2.1.100.1.1 |
wsCcRfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.3.2.1.100.2 |
wsCcRfGroup Unknown .1.3.6.1.4.1.388.14.3.2.1.100.2.1 |
wsCcRfDeprecatedGroupGroup of deprecated objects.deprecated Unknown .1.3.6.1.4.1.388.14.3.2.1.100.2.2 |