SYMBOL-WS5000-MIB
Description.
Main OID:
ccModuleId.1.3.6.1.4.1.388.6.6.1000.1
1730
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
1730 total| Object Name |
|---|
symbol OBJECT IDENTIFIER .1.3.6.1.4.1.388 |
symbolCC OBJECT IDENTIFIER .1.3.6.1.4.1.388.6 |
ws5000sysOID value for Wireless Switch 5000; (not the
family of 5000s, but the actual older 5000 hardware
with 128Mb DRAM, 128Mb DOM, 100Mb Ethernet ports).
This sysOID value is also reported for Mantis
devices. OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.0 |
ws5100sysOID value for Wireless Switch 5100; (the new
hardware first shipping around 7/2004, first supported
via software v1.3; upgraded to 256Mb DRAM, 256Mb DOM,
1000Mb Ethernet ports). OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.0.1 |
symbolCCSystem OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1 |
ccSysCfg OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.1 |
ccModuleNameThe name of the Wireless Switch.
Changing the switch name will require the KDC configuration
to be recreated if it is currently configured.
Note that the following characters cannot be part of the name string -
. , ' , \ , &, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.1.1.1 |
ccModuleDescA description of the Wireless Switch module.
Ex. <Butterfly@Symbol Technologies>rw DisplayString .1.3.6.1.4.1.388.6.1.1.2 |
ccManufactureThe manufacturer of the Wireless Switch.ro DisplayString .1.3.6.1.4.1.388.6.1.1.3 |
ccCopyrightThe Copyright information about the Wireless Switch.ro DisplayString .1.3.6.1.4.1.388.6.1.1.4 |
ccModuleVerThe software version for this model.ro DisplayString .1.3.6.1.4.1.388.6.1.1.5 |
ccMaxNumAPThe maximum number of Access Ports supported by the Wireless Switch.ro INTEGER .1.3.6.1.4.1.388.6.1.1.6 |
ccMaxNumMuThe maxium number of Mobile Unit supported by the Wireless Switch.ro INTEGER .1.3.6.1.4.1.388.6.1.1.7 |
ccActivePolicyThe current Wireless Switch policy for this model.rw DisplayString .1.3.6.1.4.1.388.6.1.1.8 |
ccTafThe object is for running TAF executable.
Ex.
1. 'addgw $1 $2'
addgw: Add a new gateway into the system routing table.
$1: new gateway IP
$2: IP family
More usage: <addgw/remgw/printgw> <gateway> <ip family>
2. '<telneton/telnetoff / ftpon/ftpoff / sslon/ssloff / snmpon/snmpoff'
Turn on/off TELNET, FTP, SSL and SNMP.
3. '<adddns/remdns/printdns> <DNS ip address>'
4. 'state <filename>'
Note:To add gateway to the local network give the value
of <ip family> as <0.0.0.0>. To add gateway to local
network first disable dhcp on both NIC.rw DisplayString .1.3.6.1.4.1.388.6.1.1.9 |
ccSnmpOpersThis object should be one of the following value:
0 - Soft Kill == Save the current changes in the agent and terminate the agent.
1 - Hard Kill == Just terminate the agent without any saving.
2 - Restart Snmpd == Restart the agent with hardly killing the old one.
3 - Update Config == Update the configuration files for the Agent.rw SnmpOpers .1.3.6.1.4.1.388.6.1.1.10 |
ccUptimeThe time since when the Wireless Switch has been up.ro DisplayString .1.3.6.1.4.1.388.6.1.1.11 |
ccFTPThe status of FTP in the Wireless Switch.
True implies that FTP is on.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.12 |
ccTelnetThe status of Telnet in the Wireless Switch.
True implies that Telnet is on.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.13 |
ccWebReturns 'http' or 'https' depending on
whether SSL is being used by the web server or not.ro DisplayString .1.3.6.1.4.1.388.6.1.1.14 |
ccSNMPFlagA 'true' as input forces the Wireless Switch to re-read the SNMP Trap configuration.
'false' is not an acceptable input.
This object is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.15 |
ccTimeSet CC time and timezone. Here's the format:
'yyyy/mm/dd hh:mm:dd timezone daylight',
where, yyyy = 4 digit of year
mm = 2 digit of month [1-12]
dd = 2 digit of date [1-31]
hh = 2 digit of hour [0-23]
mm = 2 digit of minute [0-59]
ss = 2 digit of second [0-59].
daylight saving settings=
0 -> Disabled
1 -> USA
2 -> Australia
3 -> Eastern Europe
4 -> Central Europe
5 -> Western Europe
timezone = Valid range is -12:00 to +13:00 [+/-](HH:MM)
GMT offset, DST style and cities are defined below :
(GMT offset)(daylight saving) (zones)
(GMT -12:00) 0 Eniwetok, Kwajalein
(GMT -11:00) 0 Midway Island, Samoa
(GMT -10:00) 0 Hawaii
(GMT -09:00) 0,1 Alaska
(GMT -08:00) 0,1 Pacific Time (US & Canada); Tijuana
(GMT -07:00) 0,1 Arizona, Mountain Time (US & Canada)
(GMT -06:00) 0,1 Central America, Central Time (US & Canada), Mexico City, Saskatchewan
(GMT -05:00) 0,1 Bogota, Lima, Quito, Eastern Time (US & Canada), Indiana (East)
(GMT -04:00) 0,1 Atlantic Time (Canada), Caracas, La Paz, Santiago
(GMT -03:30) 0,1 Newfoundland
(GMT -03:00) 0,3,4,5 Brasilia, Buenos Aires, Georgetown, Greenland
(GMT -02:00) 0,4 Mid-Atlantic
(GMT -01:00) 0,3,4,5 Azores, Cape Verde Is
(GMT 00:00) 0,3,4,5 Casablanca, Monrovia, Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London
(GMT +01:00) 0,3,4,5 Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna, Belgrade, Bratislava, Budapest, Ljubljana, Prague, Brussels, Copenhagen, Madrid, Paris, Sarajevo, Skopje, Sofija, Vilnius, Warsaw, Zagreb, West Central Africa
(GMT +02:00) 0,3,4,5 Athens, Istanbul, Minsk, Bucharest, Cairo, Harare, Pretoria, Helsinki, Riga, Tallinn, Jerusalem
(GMT +03:00) 0,4,5 Baghdad, Kuwait, Riyadh, Moscow, St. Petersburg, Volgograd, Nairobi
(GMT +03:30) 0 Tehran
(GMT +04:00) 0,3,4,5 Abu Dhabi, Muscat, Baku, Tbilisi, Yerevan
(GMT +04:30) 0 Kabul
(GMT +05:00) 0,5 Ekaterinburg, Islamabad, Karachi, Tashkent
(GMT +05:30) 0 Calcutta, Chennai, Mumbai, New Delhi
(GMT +05:45) 0 Kathmandu
(GMT +06:00) 0,4,5 Almaty, Novosibirsk, Astana, Dhaka, Sri Jayawardenepura
(GMT +06:30) 0 Rangoon
(GMT +07:00) 0,4,5 Bangkok, Hanoi, Jakarta, Krasnoyarsk
(GMT +08:00) 0,2,5 Beijing, Chongqing, Hong Kong, Urumqi, Irkutsk, Ulaan Bataar, Kuala Lumpur, Singapore, Perth, Taipei
(GMT +09:00) 0,5 Osaka, Sapporo, Tokyo, Seoul, Yakutsk
(GMT +09:30) 0,2 Adelaide, Darwin
(GMT +10:00) 0,2,5 Brisbane, Canberra, Melbourne, Sydney, Guam, Port Moresby, Hobart, Vladivostok
(GMT +11:00) 0,4 Magadan, Solomon Is., New Caledonia
(GMT +12:00) 0,2 Auckland, Wellington, Fiji, Kamchatka, Marshall Is.
(GMT +13:00) 0 Nuku'alofarw DisplayString .1.3.6.1.4.1.388.6.1.1.16 |
ccSNMPKdcRegardless of the input value, always to disable Snmp KDC feature.
After disabling the KDC feature, there is no data returned from the
OID tree <ccOnBoardKerberos>.
The agent will return an error message:
No value(s) returned for query.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.17 |
ccCliKdcRegardless of the input value, always to disable CLI Kdc feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.18 |
ccPolicyAddObjAdd one Wireless Switch Policy for this Wireless Switch object. The maximum number of
characters allowed is 50, and the following characters cannot be part of the input
string - ',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.1.1.19 |
ccPolicyRemObjRemove one Wireless Switch Policy for this Wireless Switch object.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string - ',.,\,&, # and double quotes.
Note: You can only remove an UNACTIVE switch policy.
Trying to remove a ACTIVE Switch Policy will get an eror like:
SNMP Commit fail.rw DisplayString .1.3.6.1.4.1.388.6.1.1.20 |
ccLicenseCountThe number of licenses issued to the WS-5000 Wireless Switch. (the number of AP that
the switch can adopt at the current state)
Note: The number of AP that the system can adopt depends on the state of the
Switch.
When it is a StandBy and disabled, it will return 0. If it is StandBy and enabled,
it will either return 0 (if not connected to a Primary), or the number of AP of its Primary.ro Integer32 .1.3.6.1.4.1.388.6.1.1.23 |
ccEmergencyPolicyThe policy which will become the emergency active policy for the switch.
In order to undefine an emergency policy, leave the input blank while SETting this variable.rw DisplayString .1.3.6.1.4.1.388.6.1.1.24 |
ccEmergencyMode'true' activates the emergency mode. Which means that the switch
will immediately start working under the emergency policy if 'true' is sent.
'false' will deactivate the emergency mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.25 |
ccRunACSSetting it to 'true' will run Automatic Channel Selection.
'false' is not an acceptable input.
This object is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.26 |
ccEnableSNMPTrapEnable/Disable the trap functionality in the switch.
'true' enables it, 'false' disables itrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.27 |
ccEnableWVPNSupportEnable(1)/Disable(2) WVPN Support.
This will reboot the switch and subsequent
reboots will have WVPN enabled at startup.
Enable(1)/Disable(2) WVPN Support.
syntax <1>
or
<1> , <license file name>
or
<2>
Note: If no license file name is given then it takes up
the default file name <license.lk>.
In case of failure error code returned is:
Error: 99.
While enabling vpnsupport the system does not
have a minimum 256MB Ram, need minimum 256MB ram
to enable vpn support.
Error: 98
While enabling vpnsupport the given License file
is invalid use the system interface mac address to
get the correct serial number and Obtain a license for
that serial number.
Error: 97
When user tries to disable vpnsuport and
dhcp server is enabled.rw OCTET STRING .1.3.6.1.4.1.388.6.1.1.28 |
ccEnableRapEnable the Rogue AP feature on the switch.
To begin RogueAP detection, ccDetectorAP has to be
enabled for an active AP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.29 |
ccAPTxPPSDisplay packets transmitted per sec by all APs adapted to WS.ro INTEGER .1.3.6.1.4.1.388.6.1.1.30 |
ccAPRxPPSDisplay packets received per sec by all APs adopted
to WSro INTEGER .1.3.6.1.4.1.388.6.1.1.31 |
ccAvgTxRetryDisplay transmit retry packets by all AP's adopted to WSro INTEGER .1.3.6.1.4.1.388.6.1.1.32 |
ccAvgRSSIDisplay avg Receive Signal Strength Indicator(RSSI)
for the WS.ro INTEGER .1.3.6.1.4.1.388.6.1.1.33 |
ccAvgSNRDisplay average Signal to Noise Ratio (SNR) for WS.ro INTEGER .1.3.6.1.4.1.388.6.1.1.34 |
ccConfigChangeLastDescription.
Last Configuration Changed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.49 |
ccNTP OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.1.60 |
ccNtpPrefTimeServerThe IP Address for the preferred time server.rw IpAddress .1.3.6.1.4.1.388.6.1.1.60.1 |
ccNtpFirstAltTimeServerThe IP Address for the first alternative time server.
Note:
If the other two Time Servers (prefer time server
and the second time server) are invalid time
server IP Addresses, this one should be a
valid time server IP address.rw IpAddress .1.3.6.1.4.1.388.6.1.1.60.2 |
ccNtpSecondAltTimeServerThe IP Address for the second alternative time server.
Note:
If the other two Time Servers (prefer time server
and the first time server) are invalid time
server IP Addresses, this one should be a valid time
server IP address.rw IpAddress .1.3.6.1.4.1.388.6.1.1.60.3 |
ccNtpGroupSetTimeServerInstead of setting each object one by one, this entry can
be used to set all the time servers at the same time.
Input string format:
<timesrv_1,timesrv_2,timesrv3>
Ex.
timesrv_1: 156.234.82.99
timesrv_2: 144.22.121.1
timesrv_3: 221.32.11.33
So, input string becomes <156.234.82.99,144.22.121.1,221.32.11.33>
Note:
Out of the three IP Addresses, at least one of them must be
a valid NTP server IP address. Otherwise, this SET doesn't work.
Since this operation takes longer time than others, so
please check the TIMEOUT setting in the manager program and make sure
that the value should be at least 5 minutes.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.60.4 |
ccNtpDelAllDelete all NTP servers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.1.60.5 |
ccPolicyTableWireless Switch Policy Table. SEQUENCE OF CcPolicyEntry .1.3.6.1.4.1.388.6.1.2 |
ccPolicyEntryThe entries of information about the Wireless Switch Policies. CcPolicyEntry .1.3.6.1.4.1.388.6.1.2.1 |
ccPolicyIndexThe index of the policy. INTEGER .1.3.6.1.4.1.388.6.1.2.1.1 |
ccPolicyNameThe name of the policy. The Maximum length of the Policy Name
can be 50 characters, Note that the following characters cannot be part
of Policy Name field, double quotes,',.,\,& and #.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.2 |
ccPolicyDescThe description of the policy. The Maximum length of the description
can be 128 characters, please note that the following characters cannot
be part of description double quotes,' and #.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.3 |
ccPolicyCountryThe Country Code chosed by this policy.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.4 |
ccPolicyDefAdoptAPPolicyThe default AP policy for any adopted Access Port.rwdeprecated DisplayString .1.3.6.1.4.1.388.6.1.2.1.5 |
ccPolicyAPPolicyCountThe number of Access Port policies used by the Wireless Switch policy.ro INTEGER .1.3.6.1.4.1.388.6.1.2.1.6 |
ccPolicyAPNameOfPolicyA list of AP policies applied for this ccPolicy.ro DisplayString .1.3.6.1.4.1.388.6.1.2.1.7 |
ccPolicyAddAPPolicyAdd an AP policy to the Wireless Switch Policy. The maximum number of
characters allowed is 50, and the following characters cannot be
part of the input string - ',.,\,&, # and double quotes.
This OID is write-only.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.8 |
ccPolicyRmvAPPolicyRemove an AP policy from the Wireless Switch Policy. The maximum number of
characters allowed is 50, and the following characters cannot be
part of the input string - ',.,\,&, # and double quotes.
This OID is write-only.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.9 |
ccPolicyExcludeInfoAdd new entries to be excluded from adoption by the WS5000 Wireless Switch,
and view the current exclusion list.
This table includs MAC-Start and MAC-End address,and the radio type.
The returned string has the format:
<Start Mac - End Mac,RadioType>
And the input string has to be in the same format.
If there is no End-Mac(i.e. only one MAC address
needs to be excluded), just specify the Start Mac,
so that the format looks like:
<Start Mac,RadioType>.
RadioType should be one of 'A', 'B', 'G' or 'FH'.
The maximum number of total entries in the list cannot
be greater than 200.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.10 |
ccPolicyExcludeEditEdit the existing Exclude Table.
Note: the input string format must be in the following format:
1. <OldMacStartAddr,OldRadioType,NewMacStartAddr,NewRadioType>
2. <OldMacStartAddr,OldRadioType,NewMacStartAddr-NewMacEndAddr,NewRadioType>.
RadioType should be one of 'A', 'B', 'G' or 'FH'.
The maximum number of total entries in the list cannot
be greater than 200.
This OID is write-only.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.11 |
ccPolicyExcludeRmvRemove an existing entry from the Exclude Table in the Adoption List.
Note: the input string must be in the format:
<Start-MAC, RadioType>,
where Start-MAC is the
starting MAC address of a particular entry.
RadioType should be one of 'A', 'B', 'G' or 'FH'.
This OID is write-only.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.12 |
ccPolicyIncludeInfoAdd new entries to be included for adoption by the WS5000 Wireless Switch.
This table includes MAC-Start and MAC-End address,the radio type, and the APPolicy
with which the radio will be adopted, upon inclusion.
The returned string has the format:
<Start Mac - End Mac,RadioType,APPolicy>
And the input string has to be in the same format.
If there is no End-Mac(i.e. only one MAC address
needs to be included), just specify the start MAC:
<Start Mac,RadioType,APPolicy>.
RadioType should be one of 'A', 'B', 'G' or 'FH'.
The maximum number of total entries in the list cannot
be greater than 200.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.13 |
ccPolicyIncludeEditEdit an existing entry in the Include list for adoption.
The entered string should have either of the following format:
1. <OldMacStartAddr,OldRadioType,NewMacStartAddr,NewRadioType,NewAPPolicyName>
2. <OldMacStartAddr,OldRadioType,NewMacStartAddr-NewMacEndAddr,NewRadioType,NewAPPolicyName>
RadioType should be one of 'A', 'B', 'G' or 'FH'.
The maximum number of total entries in the list cannot
be greater than 200.
This OID is write-only.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.14 |
ccPolicyIncludeRmvRemove an existing entry from the Include Table in the Adoption List.
Note: the input string must be in the format:
<Start MAC, RadioType>,
where Start-MAC is the
starting MAC address of a particular entry.
RadioType should be one of 'A', 'B', 'G' or 'FH'.
This OID is write-only.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.15 |
ccPolicyEtherPolicyThe current active Ethernet policy for the Ethernet Port.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.16 |
ccPolicyTrapThe true(1) indicates: send a SNMP trap when deny an AP adoption.
The false(2) indicates: not send a SNMP trap when deny an AP adoptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.2.1.17 |
ccPolicyDefChannelThe default Channel to be used.rwdeprecated INTEGER .1.3.6.1.4.1.388.6.1.2.1.18 |
ccPolicyDefPowerThe default power to be used (in mW).
Valid values are :1,5,10,15,100.rwdeprecated INTEGER .1.3.6.1.4.1.388.6.1.2.1.19 |
ccPolicyChannel11aThe Channel to be used for 11a radios.
Valid values for this channel are:
36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161
You can also input 'auto-always' for allowing the switch to choose
channels automatically. 'auto-once' can be input if
you want the switch to choose a channel automatically, only once.
Enter 'random' to select a random channel.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.20 |
ccPolicyPower11aThe power to be used (in dbM).
Valid values are :4-20rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.21 |
ccPolicyChannel11bThe Channel to be used for 11b radios.
Valid values range from 1,2,3... through 14.
You can also input 'auto-always' for allowing the switch to choose
channels automatically. 'auto-once' can be input if
you want the switch to choose a channel automatically, only once.
Enter 'random' to select a random channel.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.22 |
ccPolicyPower11bThe power to be used (in dBm).
Valid values are :4-20rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.23 |
ccPolicyDSCoExistenceEnable(true)/disable(false) FH and DS coexistence.
Set for country code US,Israel,Mexico,Sri Lanka,Japan returns an error and Get returns -1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.2.1.24 |
ccPolicyDefAdoptAPPolicy11aThe default AP policy to be used for adopted 11a radios.
To clear the existing policy, leave the input blank.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.25 |
ccPolicyDefAdoptAPPolicy11bThe default AP policy to be used for adopted 11b radios.
To clear the existing policy, leave the input blank.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.26 |
ccPolicyDefAdoptAPPolicyFHThe default AP policy to be used for adopted FH radios.
To clear the existing policy, leave the input blank.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.27 |
ccPolicyDefAdoptAPPolicy11gThe default AP policy to be used for adopted 11g radios.
To clear the existing policy, leave the input blank.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.28 |
ccPolicyChannel11gThe default Channel to be used for 11g radios. Valid values are 1 to 14.
You can also input 'auto-always' for allowing the switch to choose channels automatically.
'auto-once' can be input if you want the switch to choose a channel automatically,
only once. Enter 'random' to select a random channel.rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.29 |
ccPolicyPower11gThe power to be used (in dBm).
Valid values are :4-20rw DisplayString .1.3.6.1.4.1.388.6.1.2.1.30 |
ccCountryInfoTableCountry Information Table. SEQUENCE OF CcCountryInfoEntry .1.3.6.1.4.1.388.6.1.3 |
ccCountryInfoEntryAn entry in this table indicates one country information. CcCountryInfoEntry .1.3.6.1.4.1.388.6.1.3.1 |
ccCCIndexIndex of the table.ro INTEGER .1.3.6.1.4.1.388.6.1.3.1.1 |
ccCCodeThe Country Code for this countryro DisplayString .1.3.6.1.4.1.388.6.1.3.1.2 |
ccFullNameThe name of this country.ro DisplayString .1.3.6.1.4.1.388.6.1.3.1.3 |
cc11aChannelsThe list of 11a channels applicable to this country.ro DisplayString .1.3.6.1.4.1.388.6.1.3.1.6 |
cc11bChannelsThe list of 11b channels applicable to this country.ro DisplayString .1.3.6.1.4.1.388.6.1.3.1.7 |
ccFHTableNumThe hop sequence table numberro INTEGER .1.3.6.1.4.1.388.6.1.3.1.8 |
ccFHChannelsList of all FH Channelsro DisplayString .1.3.6.1.4.1.388.6.1.3.1.9 |
ccFHAlgorithmThe algorithm used for frequency hopping.ro FHAlgorithm .1.3.6.1.4.1.388.6.1.3.1.10 |
ccFHContiguousNumber of total contiguous channelsro INTEGER .1.3.6.1.4.1.388.6.1.3.1.11 |
ccFHHopSequenceThe Hop Sequence used in the frequency hopping algorithmro DisplayString .1.3.6.1.4.1.388.6.1.3.1.12 |
cc11gChannelsThe list of 11g channels applicable to this country.ro DisplayString .1.3.6.1.4.1.388.6.1.3.1.13 |
ccOnBoardKerberos OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.4 |
kerbCfgKDC OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.4.3 |
kdcTypeRepresent the current KDC type MASTER/SLAVE.
return string format: <master> or <slave> or <neither>
Note:
<neither> means that no KDC server has been configured yet,
and you need to configurate one.ro DisplayString .1.3.6.1.4.1.388.6.1.4.3.1 |
masterHostThe host name of a remote master KDC used by the on-board Slave-KDC.
This object is valid when the onboard KDC is configured is Slave.ro DisplayString .1.3.6.1.4.1.388.6.1.4.3.7 |
masterIPAddressThe IP address of a remote master KDC used by the on-board Slave-KDC.
only valid for creating a Slave-KDC.ro IpAddress .1.3.6.1.4.1.388.6.1.4.3.8 |
createMsKdcConfigure an on-board Master KDC.
Input string format:
<realm,interface>
Input string length limits:
realm: 32 bytes
interface integer
The following characters are not allowed for realm:
` @ # $ & ( ) = | \ ; double-quote ' < > / sp
and interface should be 1 or 2.
Note:
If the on-board KDC is already configured as master or slave
then reconfiguring is not possible till the earlier configuration
is deleted.rw DisplayString .1.3.6.1.4.1.388.6.1.4.3.9 |
delMsKdcTrue will delete the Master KDC and false is an invalid input.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.4.3.10 |
createSlvKdcConfigure an on-board Slave KDC.
Input string format:
<realm,master_hostname,master_ip,interface>
Input string length limits:
realm: 32 characters
hostname: 50 characters
For realm, the following characters are not allowed:
` @ # $ & ( ) = | \ ; double-quote ' < > / sp
And for hostname, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or last character of the hostname.
interface could be 1 or 2 (etherport no.)
Note:
If the on-board KDC is already configured as master or slave
then reconfiguring is not possible till the earlier configuration
is deleted.rw DisplayString .1.3.6.1.4.1.388.6.1.4.3.11 |
delSlvKdcTrue will delete the Slave KDC and false is an invalid input.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.4.3.12 |
kdcRealmThe REALM of the on-board KDC. The Maximum length of the KDC Realm
can be 32 characters. Note that the following characters cannot be part
of KDC Realm field - `@#$&()|\\;'<>/ = and double quotes.ro DisplayString .1.3.6.1.4.1.388.6.1.4.3.13 |
interfaceNumberThe Interface this KDC is to be configured on.
Valid Interface values 'ethernet1' & 'ethernet2'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.4.3.14 |
addkdcMuAdd a KDC user.
This is Write-only.
syntax <kdcUsername,password,ticket_life>rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.4.3.15 |
remkdcMuRemove a KDC user
This is Write-only.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.4.3.16 |
kerbCfgSlave OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.4.4 |
addSlaveAdd one slave kdc into the on-board Master KDC.
Input string format:
<hostname,domain,ip>
For hostname, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or last character of the hostname.
For domain, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain name.rw DisplayString .1.3.6.1.4.1.388.6.1.4.4.1 |
delSlaveDelete one slave kdc from the on-board Master KDC.
Input string format:
<hostname,domain,ip>
For hostname, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or last character of the hostname.
For domain, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain name.rw DisplayString .1.3.6.1.4.1.388.6.1.4.4.2 |
slaveCountThe index of the KDC-Slave for this on-board Kerberos.ro Integer32 .1.3.6.1.4.1.388.6.1.4.4.3 |
slaveTableA table of remote Slave-KDC information.
Then we assume that the current on-board KDC is a master KDC. SEQUENCE OF SlaveEntry .1.3.6.1.4.1.388.6.1.4.4.4 |
slaveEntryThe entries of information about the remote Slave-KDC. SlaveEntry .1.3.6.1.4.1.388.6.1.4.4.4.1 |
hostNameThe host name of a remote slave KDC. The Maximum length of the KDC Host Name
can be 50 characters.
For hostname, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or last character of the hostname.ro DisplayString .1.3.6.1.4.1.388.6.1.4.4.4.1.1 |
realMThe realm for the remote Slave-KDC. The Maximum length of the KDC Realm
can be 32 characters. Note that the following characters cannot be part
of KDC Realm field - `@#$&()|\\;'<>/ = and double quotes.ro DisplayString .1.3.6.1.4.1.388.6.1.4.4.4.1.2 |
ipAddressThe IP address of the remote Slave-KDC.ro IpAddress .1.3.6.1.4.1.388.6.1.4.4.4.1.3 |
domainNameThe domain name of a remote slave KDC.
For domain, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain namero DisplayString .1.3.6.1.4.1.388.6.1.4.4.4.1.4 |
slaveIndexThe index of the SlaveTable INTEGER .1.3.6.1.4.1.388.6.1.4.4.4.1.5 |
syncDBSynchronize the slave KDC database.
Input string format:
<hostname,domain,ip>
For hostname, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or last character of the hostname.
For domain, only the following characters are allowed:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain namerw DisplayString .1.3.6.1.4.1.388.6.1.4.4.5 |
kerbCfgNTP OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.4.5 |
prefTimeServerThe IP address for the preferred time server.rw IpAddress .1.3.6.1.4.1.388.6.1.4.5.1 |
firstAltTimeServerThe IP address for the first alternative time server.
Note:
If other two Time Server (prefer time server and the second time
server ) are invalid time server ip address, this one should be a
valid time server ip address.rw IpAddress .1.3.6.1.4.1.388.6.1.4.5.2 |
secondAltTimeServerThe IP address for the second alternative time server.
Note:
If other two Time Server (prefer time server and the first time
server ) are invalid time server ip address, this one should be a
valid time server ip address.rw IpAddress .1.3.6.1.4.1.388.6.1.4.5.3 |
groupSetTimeServerInstead of setting each object one by one, this entry can
be used to set all the time servers at the same time.
Input string format:
<timesrv_1,timesrv_2,timesrv3>
Ex.
timesrv_1: 156.234.82.99
timesrv_2: 144.22.121.1
timesrv_3: 221.32.11.33
So, input string becomes <156.234.82.99,144.22.121.1,221.32.11.33>
Note:
Out of the three IP Addresses, at least one of them must be
a valid NTP server IP address. Otherwise, this SET doesn't work.
Since this operation takes longer time than others, so
please check the TIMEOUT setting in the manager program and make sure
that the value should be at least 5 minutes.rw DisplayString .1.3.6.1.4.1.388.6.1.4.5.4 |
delAllDelete all of NTP servers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.4.5.5 |
delTimeServerDelete a Time Server.Enter either '1' or '2' or '3',
to delete the preferred, first alternative server,
and second alternative server respectivelyrwdeprecated DisplayString .1.3.6.1.4.1.388.6.1.4.5.6 |
kerbKDCUsers OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.4.6 |
kdcUserTable SEQUENCE OF KdcUserEntry .1.3.6.1.4.1.388.6.1.4.6.1 |
kdcUserEntryThe Users(MU's) in the KDC with ticketlife. KdcUserEntry .1.3.6.1.4.1.388.6.1.4.6.1.1 |
kdcUserIndexThe Index of the kdcUserEntry table. INTEGER .1.3.6.1.4.1.388.6.1.4.6.1.1.1 |
kdcUserNameThe list of Users(MU's) registered in the KDC. The Maximum length of the User Name
can be 20 characters. Note that the following characters cannot be part
of User Name field - ',@,#,$,&,\,<, ,> and double quotes. and double quotes.ro DisplayString .1.3.6.1.4.1.388.6.1.4.6.1.1.2 |
kdcUserTlifeA Kerberos Ticket life time for this user.
The range would be in (1 - 600).rw Integer32 .1.3.6.1.4.1.388.6.1.4.6.1.1.3 |
kdcWLANTable SEQUENCE OF KdcWLANEntry .1.3.6.1.4.1.388.6.1.4.6.2 |
kdcWLANEntryThe list of WLAN's registered in the KDC. KdcWLANEntry .1.3.6.1.4.1.388.6.1.4.6.2.1 |
kdcWLANIndexThe index of the WLANs for this on-board Kerberos. INTEGER .1.3.6.1.4.1.388.6.1.4.6.2.1.1 |
kdcWLANNameThe name of a WLAN's which has a registered account in the On-Board KDC.ro DisplayString .1.3.6.1.4.1.388.6.1.4.6.2.1.2 |
kdcWLANTlifeA Kerberos Ticket life time for this WLAN.
The range would be in (0 - 600).rw Integer32 .1.3.6.1.4.1.388.6.1.4.6.2.1.3 |
radiusAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5 |
radiusAuthClientMIB OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5.2 |
radiusAuthClientMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5.2.1 |
radiusAuthClient OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5.2.1.1 |
radiusAuthClientInvalidServerAddressesThe number of RADIUS Access-Response packets
received from unknown addressesro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.1 |
radiusAuthServerTableThe (conceptual) table listing the RADIUS authentication
servers with which the client shares a secret. SEQUENCE OF RadiusAuthServerEntry .1.3.6.1.4.1.388.6.1.5.2.1.1.3 |
radiusAuthServerEntryAn entry (conceptual row) representing a RADIUS
authentication server with which the client shares
a secret. RadiusAuthServerEntry .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1 |
radiusAuthServerIndexA number uniquely identifying each RADIUS
Authentication server with which this client
communicates. Note that Index 1 denotes the Primary
RADIUS server, while 2 denotes the secondary RADIUS server. Integer32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.1 |
radiusAuthServerAddressThe IP address or the name of the RADIUS authentication
server referred to in this table entry.The syntax for
the input is :<host_name/IP>,<RADIUS Secret>.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.2 |
radiusAuthClientServerPortNumberThe UDP port the client is using to send requests to
this server.rw Integer32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.3 |
radiusAuthClientRoundTripTimeThe time interval (in hundredths of a second) between
the most recent Access-Reply/Access-Challenge and the
Access-Request that matched it from this RADIUS
authentication server.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.4 |
radiusAuthClientAccessRequestsThe number of RADIUS Access-Request packets sent
to this server. This does not include retransmissions.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.5 |
radiusAuthClientAccessRetransmissionsThe number of RADIUS Access-Request packets
retransmitted to this RADIUS authentication server.rw INTEGER .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.6 |
radiusAuthClientAccessAcceptsThe number of RADIUS Access-Accept packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.7 |
radiusAuthClientAccessRejectsThe number of RADIUS Access-Reject packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.8 |
radiusAuthClientAccessChallengesThe number of RADIUS Access-Challenge packets
(valid or invalid) received from this server.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.9 |
radiusAuthClientMalformedAccessResponsesThe number of malformed RADIUS Access-Response
packets received from this server.
Malformed packets include packets with
an invalid length. Bad authenticators or
Signature attributes or unknown types are not
included as malformed access responses.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.10 |
radiusAuthClientBadAuthenticatorsThe number of RADIUS Access-Response packets
containing invalid authenticators or Signature
attributes received from this server.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.11 |
radiusAuthClientPendingRequestsThe number of RADIUS Access-Request packets
destined for this server that have not yet timed out
or received a response. This variable is incremented
when an Access-Request is sent and decremented due to
receipt of an Acess-Accept, Access-Reject or
Access-Challenge, a timeout or retransmission.ro Gauge32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.12 |
radiusAuthClientTimeoutsThe number of authentication timeouts to this server.
After a timeout the client may retry to the same
server, send to a different server, or
give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different
server is counted as a Request as well as a timeout.rw INTEGER .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.13 |
radiusAuthClientUnknownTypesThe number of RADIUS packets of unknown type which
were received from this server on the authentication port.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.14 |
radiusAuthClientPacketsDroppedThe number of RADIUS packets of which were
received from this server on the authentication port
and dropped for some other reason.ro Counter32 .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.15 |
radiusAuthClientIdentifierThe NAS identifier of the RADIUS authentication client.ro SnmpAdminString .1.3.6.1.4.1.388.6.1.5.2.1.1.3.1.16 |
radiusAuthClientMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5.2.2 |
radiusAuthClientMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5.2.2.1 |
radiusAuthClientMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.5.2.2.2 |
ccEventsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.6 |
ccEventsAllLocalLogEnable/Disable local logging for all Events.
This variable is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.1 |
ccEventsAllSNMPTrapEnable/Disable SNMP Trap for all Events.
This variable is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.2 |
ccEventsAllSyslogEnable/Disable Syslog for all Events. In order
to SET the Syslog level for all Events to a particular severity level,
enter the severity level as the input. The accepted severity levels are:
'emerg' for emergency level,
'alert' for alert level,
'crit' for critical level,
'err' for error level,
'warning' for warning level,
'notice' for notice level,
'info' for info level,
'debug' for debug level
In order to disable Syslogging for all Events,
enter 'disable' as the input (without the single quotes).
This variable is SET-only.rw DisplayString .1.3.6.1.4.1.388.6.1.6.3 |
ccEventsAllDefaultSet all Events to their default state. Only 'true'
is a valid input.
This variable is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.4 |
ccEventTableA list of Syslog predefined events SEQUENCE OF CcEventEntry .1.3.6.1.4.1.388.6.1.6.5 |
ccEventEntryAn entry in the Events Table CcEventEntry .1.3.6.1.4.1.388.6.1.6.5.1 |
ccEventIndexIndex of an specific event. INTEGER .1.3.6.1.4.1.388.6.1.6.5.1.1 |
ccEventDescrDescription of an specific event.ro DisplayString .1.3.6.1.4.1.388.6.1.6.5.1.2 |
ccEventDefaultSet the event to its default state. Only 'true'
is an acceptable value.
This variable is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.5.1.3 |
ccEventSyslogEnable/Disable Syslog for this Event. In order
to SET the Syslog level for this Event to a particular severity level,
enter the severity level as the input. The accepted severity levels are:
'emerg' for emergency level,
'alert' for alert level,
'crit' for critical level,
'err' for error level,
'warning' for warning level,
'notice' for notice level,
'info' for info level,
'debug' for debug level
In order to disable Syslogging for this Event,
enter 'disable' as the input (without the single quotes)rw DisplayString .1.3.6.1.4.1.388.6.1.6.5.1.4 |
ccEventSNMPTrapCurrent SNMP-Trap's status of an specific event.
Setting it to 'true' activates the SNMP trap for this particular Event,
while 'false' deactivates itrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.5.1.5 |
ccEventLocalLogActivate/Deactivate local logging.
'true' activates local logging.
'false' deactivates local logging for this particular Event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.5.1.6 |
ccSyslogObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.6.6 |
ccSysLogStatusTo retrieve and set the current syslog settings
within CC. Acceptable values are: True(1), False(2)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.1.6.6.1 |
ccSyslogHosts OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.6.6.2 |
ccSyslogAddHostAdd a new Syslog collector host.
You also need to provide the IP address of the host,
so the input format is :
<hostname,IP Address>
Only the following characters can be part of the hostname:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or the last character of the hostname.rw DisplayString .1.3.6.1.4.1.388.6.1.6.6.2.1 |
ccSyslogRemHostRemove an existing Syslog collector host.rw DisplayString .1.3.6.1.4.1.388.6.1.6.6.2.2 |
ccSyslogHostsTableA list of Syslog Hosts SEQUENCE OF CcSyslogHostsEntry .1.3.6.1.4.1.388.6.1.6.6.2.3 |
ccSyslogHostsEntryAn entry in Syslog Hosts table CcSyslogHostsEntry .1.3.6.1.4.1.388.6.1.6.6.2.3.1 |
ccSyslogHostIndexIndex of specific Syslog Host. INTEGER .1.3.6.1.4.1.388.6.1.6.6.2.3.1.1 |
ccSyslogHostNameDNS name of specific Syslog Host.ro DisplayString .1.3.6.1.4.1.388.6.1.6.6.2.3.1.2 |
ccSyslogHostIPAddrIP address of the Syslog Hostrw IpAddress .1.3.6.1.4.1.388.6.1.6.6.2.3.1.3 |
ccSyslogHostDomainDomain Name of the Syslog Host.
Note that only the following characters are allowed in the domain name:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain name.
If no Domain Name has been specified,
then 'NA' is returned by the wireless switch.rw DisplayString .1.3.6.1.4.1.388.6.1.6.6.2.3.1.4 |
ccSyslogHostSetSeveritySet the severity level for which
this particular host will receive syslog messages.
The input format is:
<SeverityLevel/'all','on'/'off'>
where SeverityLevel can be one of the following strings:
'emerg' for emergency level,
'alert' for alert level,
'crit' for critical level,
'err' for error level,
'warning' for warning level,
'notice' for notice level,
'info' for info level,
'debug' for debug level.
'all' as SeverityLevel configures the collector to
receive syslog messages for all severity levels.
'on' is used to activate the host for receiving syslog messages.
'off' causes the host to stop receiving syslog messages for that particular severity level.
This variable is SET-only.rw DisplayString .1.3.6.1.4.1.388.6.1.6.6.2.3.1.5 |
ccSyslogHostSeverityListThe list of all severity levels whose messages this host is configured to receive.ro DisplayString .1.3.6.1.4.1.388.6.1.6.6.2.3.1.6 |
ccSystemHosts OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.7 |
ccSystemAddHostAdd a new System Host.
You also need to provide the IP address of the host,
so the input format is :
<hostname,IP Address>
Only the following characters can be part of the hostname:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_-
Also, '_' and '-' cannot be the first or the last character of the hostname.rw DisplayString .1.3.6.1.4.1.388.6.1.7.1 |
ccSystemRemHostRemove an existing System Host.rw DisplayString .1.3.6.1.4.1.388.6.1.7.2 |
ccSystemHostsTableA list of Syslog Hosts SEQUENCE OF CcSystemHostsEntry .1.3.6.1.4.1.388.6.1.7.3 |
ccSystemHostsEntryAn entry in Syslog Hosts table CcSystemHostsEntry .1.3.6.1.4.1.388.6.1.7.3.1 |
ccSystemHostIndexIndex of specific System Host. INTEGER .1.3.6.1.4.1.388.6.1.7.3.1.1 |
ccSystemHostNameDNS name of specific System Host.ro DisplayString .1.3.6.1.4.1.388.6.1.7.3.1.2 |
ccSystemHostIPAddrIP address of the System Hostrw IpAddress .1.3.6.1.4.1.388.6.1.7.3.1.3 |
ccSystemHostDomainDomain Name of the System Host.
Note that only the following characters are allowed in the domain name:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain name.
If no Domain Name has been specified,
then 'NA' is returned by the wireless switch.rw DisplayString .1.3.6.1.4.1.388.6.1.7.3.1.4 |
ccPolicyRCObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.8 |
ccPolicyRCAddRemTableA list of objects used to add/remove items from
the Restricted channels list SEQUENCE OF CcPolicyRCAddRemEntry .1.3.6.1.4.1.388.6.1.8.1 |
ccPolicyRCAddRemEntryAn entry in the table of RC Add Remove objects.
The two indices are ccPolicyIndex and ccPolicyRadioType.
ccPolicyIndex is taken from the ccPolicyTable, and specifies which
CCPolicy's Restricted Channel table is being accessed.
ccPolicyRadioType is used to specify the type of the radio (A or B)
to which the Restricted Channel table belongs CcPolicyRCAddRemEntry .1.3.6.1.4.1.388.6.1.8.1.1 |
ccPolicyRadioTypeccPolicyRadioType is used as one of the indicies
to specify the type of the radio (A or B)
to which the Restricted Channel table belongs.
A value of 1 for this index denotes an 11a radio and
2 denotes an 11b radio. INTEGER .1.3.6.1.4.1.388.6.1.8.1.1.1 |
ccPolicyRCAddAdd an entry into the RC Table for this CCPolicy and radiotype.
If you want to specify a reason for declaring a particular channel as a
restricted channel, you can enter the data in this format:
<Channel number, reason>. The 'reason' is optional (i.e. you can enter only the channel number)
but the channel reason/description if entered, should not be more than 40 characters.rw DisplayString .1.3.6.1.4.1.388.6.1.8.1.1.2 |
ccPolicyRCRemRemove an entry from the RC Table for this CCPolicy and radiotype.
You just need to specify the channel number which you want to be removed
from the table.rw DisplayString .1.3.6.1.4.1.388.6.1.8.1.1.3 |
ccPolicyRCTableA list of restricted channels and their descriptions.
(Per CCPolicy, per RadioType) SEQUENCE OF CcPolicyRCEntry .1.3.6.1.4.1.388.6.1.8.2 |
ccPolicyRCEntryAn entry in the Restricted Channels table.
The three indices are ccPolicyIndex,ccPolicyRadioType, and ccPolicyRcIndex.
ccPolicyIndex is taken from the ccPolicyTable, and specifies which
CCPolicy's Restricted Channel table is being accessed.
ccPolicyRadioType is used to specify the type of the radio (A or B)
to which the Restricted Channel table belongs (index is 1 for 11a,
and 2 for 11b).
ccPolicyRcIndex specifies one particular listing in the Restricted Channels Table CcPolicyRCEntry .1.3.6.1.4.1.388.6.1.8.2.1 |
ccPolicyRcIndexThe index of the restricted channel INTEGER .1.3.6.1.4.1.388.6.1.8.2.1.1 |
ccPolicyRCChannelDescrThe channel number and description,at this particular index
in the Restricted channel table. The returned string is in the format
<channel,description>. Note that if no description has been entered for
that particular channel, you will receive the reply as <channel,>, i.e. nothing
in the description fieldro DisplayString .1.3.6.1.4.1.388.6.1.8.2.1.2 |
ccPolicyObject OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1.9 |
ccPolicyAPPolicyTableTable of APPolicies per Wireless Switch Policy SEQUENCE OF CcPolicyAPPolicyEntry .1.3.6.1.4.1.388.6.1.9.2 |
ccPolicyAPPolicyEntryThe entries of APPolicies per Wireless Switch Policy. CcPolicyAPPolicyEntry .1.3.6.1.4.1.388.6.1.9.2.1 |
ccPolicyAPPolicyIndexThe index of the AP policy. INTEGER .1.3.6.1.4.1.388.6.1.9.2.1.1 |
ccPolicyAPPolicyNameA list of AP policies applied for this Switch Policy.ro DisplayString .1.3.6.1.4.1.388.6.1.9.2.1.2 |
symbolCCInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.2 |
ccAPPolicyAddObjAdd one AP Policy object into the AP Policy table. The Maximum length of the AP Policy
Name can be 50 characters, Note that the following characters cannot be part
of Policy Name field, double quotes,',.,\,& and #.rw DisplayString .1.3.6.1.4.1.388.6.2.1 |
ccAPPolicyRemObjRemove one AP Policy object from the AP Policy table.rw DisplayString .1.3.6.1.4.1.388.6.2.2 |
ccEPPAddObjAdd one Ethernet policy object into the EPP table. The Maximum length of the Ethernet Policy
Name can be 50 characters,Note that the following characters cannot be part of
Ethernet Policy Name field, double quotes,',.,\,& and #.rw DisplayString .1.3.6.1.4.1.388.6.2.3 |
ccEPPRemObjRemove one Ethernet policy object from the EPP table. The Maximum length of the Ethernet Policy
Name can be 50 characters,Note that the following characters cannot be part of
Ethernet Policy Name field, double quotes,',.,\,& and #.rw DisplayString .1.3.6.1.4.1.388.6.2.4 |
ccAccessPortAddObjAdd an access port. The input string should have the following syntax:
<dev_mac,dev_type,radio1_name,radio1_mac,radio2_name,radio2_mac>.
dev_mac is the mac address of the Access Port's NIC.
dev_type must be one of 'ap300''ap200','ap100', 'ap3020' 'ap4131' or 'ap4121'.
For 'ap200' and ap300, radio1 will be considered to be of type 802.11a, and at least
one such radio definitely needs to be specified.
For 'ap100' 'ap4131' or 'ap4121', only provide the radio1_name value, since there can
be only one radio on a 'ap100' 'ap4131' or 'ap4121' accessport, and that one radio
definitely has the same MAC address as the device, and also, that one radio
is always an 802.11b radio.
Similarly, for a device of type 'ap3020', provide only radio1_name, since the
FH radio will have the same MAC as that of the device.
Note: The following characters cannot be part of radio1_name and radio2_name Name
field - ',.,,&, # and double quotes,
and the maximum characters allowed for each of these names are 50.
few synatx examples are given below:-
To add AP100 :<dev_mac>,ap100,<radio_name>,<radio_mac>
Note:radio_mac is optional for Ap100
To add AP3020-3021: <dev_mac>,ap3020,<radio_name>,<radio_mac>
Note:radio mac is optioanl for AP3020
To add AP300: <dev_mac>,ap300,<g_radio_name>,<g_mac>,<a_radio>,<a_mac>
Note:One can add only 'g' radio also.
To add AP200: <dev_mac>,ap200,<a_radio_name>,<a_mac>,<b_radio>,<b_mac>
Note:One can add only 'a' radio also
To add AP4121:<dev_mac>,ap4121,<radio_name>,<radio_mac>
Note:radio mac is optional for ap4121
To add AP4131:<dev_mac>,ap4132,<radio_name>,<radio_mac>
Note:radio mac is optional for ap4131rw DisplayString .1.3.6.1.4.1.388.6.2.5 |
ccAccessPortRemObjRemove an AccessPort
syntax :<port name>
When a ap200/ap300 Access port is removed both the radio
macs are removed.rw DisplayString .1.3.6.1.4.1.388.6.2.6 |
ccFWLanAddObjAdd a LAN to the system.rw DisplayString .1.3.6.1.4.1.388.6.2.7 |
ccFWLanRemObjRemove the LAN from the system.rw DisplayString .1.3.6.1.4.1.388.6.2.8 |
ccAPTableThe Table of AccessPorts. SEQUENCE OF CcAPEntry .1.3.6.1.4.1.388.6.2.10 |
ccAPEntryAn AccessPort Configuration entry. CcAPEntry .1.3.6.1.4.1.388.6.2.10.1 |
ccRadioIndexThe Index for the Access port. INTEGER .1.3.6.1.4.1.388.6.2.10.1.28 |
ccRadioNameThe Name of the Access port. The Maximum length of the Radio Name
can be 50 characters. Note that the following characters cannot be part
of Radio Name field - ',.,\,&, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.2.10.1.29 |
ccRadioDescThe description of the Access port. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be part
of description - ',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.2.10.1.30 |
ccRadioOnlineStatusOnline status for this Access port.
0(zero) means 'unavailable' or non-existent.
1 means 'active',, i.e. functional
2 means 'inactive',existent but not functional.
3 means 'alert' indicating that some errors have occured with
this accessport. For example, a time-out or a reset.ro APOnlineStatus .1.3.6.1.4.1.388.6.2.10.1.31 |
ccRadioMACThe MAC address of this radio.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.32 |
ccDeviceMACThe MAC address of the device to which this radio belongs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.33 |
ccDeviceLocationThe location of this device.rw DisplayString .1.3.6.1.4.1.388.6.2.10.1.34 |
ccRadioTypeThe type of this radio. 'A' or 'B' denote 802.11a and 802.11b respectively.
'FH' denotes an FH radio.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.35 |
ccRadioChannelThe channel on which this radio is operating.
Valid values for 11a are:34,36,38,40...64.
Valid values for 11b are:1,2,3,...14.
Also, 'auto-once' is a valid channel if you want switch to choose
channel automaticlly. 'auto-always' and 'random' are also valid channels.
Note that this property is not applicable to FH radios.
So a GET returns the appropriate message, and a SET fails.rw DisplayString .1.3.6.1.4.1.388.6.2.10.1.36 |
ccRadioPowerThe power on which this radio is operating.
Valid values for both 11a and 11b are :1,5,15,30,Full.rodeprecated DisplayString .1.3.6.1.4.1.388.6.2.10.1.37 |
ccRadioPolicyThe policy governing this radio.
To clear the existing policy, leave the input blank.rw DisplayString .1.3.6.1.4.1.388.6.2.10.1.38 |
ccDeviceNicThe NIC number on which this device is connected to the WS5000 wireless Switch.
Valid Values are 1 or 2ro INTEGER .1.3.6.1.4.1.388.6.2.10.1.39 |
ccDeviceTypeThe type of the device. Expect either of 'AP200','AP100','AP300','AP4121','AP3020/3021' as the value.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.40 |
ccRadioCCAmodeThe CCA Mode for the Access port.rw INTEGER .1.3.6.1.4.1.388.6.2.10.1.41 |
ccRadioCCAthreshThe CCA threshold for the Access port.rw INTEGER .1.3.6.1.4.1.388.6.2.10.1.42 |
ccRadioDiversityThe antenna setting for the Access Port.
Valid values are 0,1 and 2. 0 indicates Full, 1 indicates primary,
and 2 indicates secondary.rw INTEGER .1.3.6.1.4.1.388.6.2.10.1.43 |
ccDeviceVlanidThe VLAN id for the Access port.ro INTEGER .1.3.6.1.4.1.388.6.2.10.1.44 |
ccDeviceVlanTagsSeenThe Vlan Tags seen by this device.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.45 |
ccRadioUptimeThe time for which this radio has been up.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.46 |
ccRadioTxppsThe number of packets transmitted per second between AP and MU.ro INTEGER .1.3.6.1.4.1.388.6.2.10.1.47 |
ccRadioMUsThe number of MUs associated with this radio.ro INTEGER .1.3.6.1.4.1.388.6.2.10.1.48 |
ccRadioGatherStatisticstrue(1)/false(2) to turn on/off the functionality of gathering AP
statistic data.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.49 |
ccRadioResetA 'true' as input will reset the Radio.
'false' is not an acceptable input.
Note that a Reset message can be sent out only if
the radio is in 'active' state.
This object is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.50 |
ccDeviceClearSeenVlanTagstrue(1) will clear the seen Vlansrwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.51 |
ccDeviceResetA 'true' as input will reset the Device.
'false' is not an acceptable input.
This object is SET-only.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.52 |
ccRadioAuto'true' enables ACS-on-adoption for this
particular radio.'false' disables it.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.53 |
ccRadioMUPowerThe power value to be put in the beacon of this radio.
Valid values are : 1,5,15,30,Full,default.
Note that 'default' as input causes the beacon to have the
same power level as this radio.rodeprecated DisplayString .1.3.6.1.4.1.388.6.2.10.1.54 |
ccRadioProtectionDefines whether 'Protection' is On or Off.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.55 |
ccRadioShortSlotDefines whether Short Slot is On or Off.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.56 |
ccRadioAntennaDefines whether antenna type is internal, external or unknown.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.57 |
ccRadioCurrentChannelCurrent channel.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.58 |
ccRadioAllChannelsA comma seperated list of all channels valid for this radio.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.59 |
ccRadioPowerdBmThe power on which the radio is configured to operate in dBm.
Valid range depends on the country and radio configuration.
It is as defined in the 'ccRadioAllPower' object.rw DisplayString .1.3.6.1.4.1.388.6.2.10.1.60 |
ccRadioCurrentPowerThe power on which the radio is currently operating in dBm.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.61 |
ccRadioAllPowerThe valid power range for the radio in the format 'min_power-max_power'.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.62 |
ccRadioMUPowerdBmPower level adjustment for MU. The valid range is -20 to 20 dB.rw DisplayString .1.3.6.1.4.1.388.6.2.10.1.63 |
ccRadioAntCorrectionAntenna correction factor. The valid range is -20 to 20dBi.
Note:This OID is supported only for AP300 device
with external antennarw INTEGER .1.3.6.1.4.1.388.6.2.10.1.64 |
ccRadioIndoorRadio location indoor or outdoor. Valid values are 'in' or 'out'.
Note:This OID is supported only for AP300 device
with external antennarw DisplayString .1.3.6.1.4.1.388.6.2.10.1.65 |
ccRadioDFSDFS status. Valid values are:off,on,active,channel scan.
Supported only for 11a radio.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.66 |
ccRadioTPCTPC status. Valid values are: off,on.
Supported only for 11a radio.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.67 |
ccRadioRadarChannelsA comma seperated list of all channels with timestamps where radar was detected.ro DisplayString .1.3.6.1.4.1.388.6.2.10.1.68 |
ccDetectorApIf this is enabled, the switch uses this AP to
detect Rogue APs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.10.1.69 |
ccRadioMaxMUsThe number of maximum MUs for the Access portrw INTEGER .1.3.6.1.4.1.388.6.2.10.1.70 |
ccSimulateRadarTrue(1) value will set simulateradar.
Setting it true sets the Dwell time value.
Note: A get over it always return idealState(2) and
this OID is supported only for AP300 device type
A set operation over other device type's will
return Not writeablerw DoActionNow .1.3.6.1.4.1.388.6.2.10.1.71 |
ccRadioUser802xSet the 802.1x user name and password
Syntax: <user name>,<password>
Note: This OID is supported only for AP300 device type
The maximum length of user and password is 32 each.rw OCTET STRING .1.3.6.1.4.1.388.6.2.10.1.72 |
ccAPPolicyTableAPPolicy Table. SEQUENCE OF CcAPPolicyEntry .1.3.6.1.4.1.388.6.2.11 |
ccAPPolicyEntryAn entry in this table indicates the interface policy information. CcAPPolicyEntry .1.3.6.1.4.1.388.6.2.11.1 |
ccAPPolicyIndexThe index of the AP policy. INTEGER .1.3.6.1.4.1.388.6.2.11.1.1 |
ccAPPolicyNameThe name of the policy. The Maximum length of the Policy Name
can be 50 characters, Note that the following characters cannot be part
of Policy Name field, double quotes,',.,\,& and #.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.11.1.2 |
ccAPPolicyDescThe description of the AP policy. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be part
of description double quotes,' and #rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.3 |
ccAPPolicyPreAmbleLong/Short preamble feature for the WLANs in this APPolicy.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.10 |
ccAPPolicyBeaconIntervalThe interval at which beacons are transmitted.
Valid values are between 20 to 1000rw INTEGER .1.3.6.1.4.1.388.6.2.11.1.11 |
ccAPPolicyRTSThresholdThe RTS (Request To Send) threshold for this WLAN.
This threshold means that any unicast data or management frames
larger than this setting must be transmitted using the RTS/CTS
(Clear to Send) handshake exchange. By default, the value is 2347,
which has the effect of deactivating RTS/CTS clearing before
transmission. Setting the object to 0 activates the RTS/CTS
handshake before every transmission.
The valid values are from 0 to 2437.rw INTEGER .1.3.6.1.4.1.388.6.2.11.1.12 |
ccAPPolicyDTIMThis setting, always a multiple of the beacon period, determines
how often the beacon contains a delivery traffic indication message(DTIM).
The DTIM tells power-save client devices that a packet is waiting
for them.
Valid values are from 1 to 20, both inclusive.rw INTEGER .1.3.6.1.4.1.388.6.2.11.1.13 |
ccAPPolicyBasicRates11aThe Basic Rate set for 11a radios which shall be governed by this policy.
Valid values could be any combination of 6,9,12,18,24,36,48,54.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.14 |
ccAPPolicySupportedRates11aThe Supported Rate set for 11a radios which shall be governed by this policy.
Valid values could be any combination of 6,9,12,18,24,36,48,54rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.15 |
ccAPPolicyBasicRates11bThe Basic Rate set for 11b radios which shall be governed by this policy.
Valid values are any combination of 1,2,5.5,11rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.16 |
ccAPPolicySupportedRates11bThe Supported Rate set for 11b radios which shall be governed by this policy.
Valid values are any combination of 1,2,5.5,11rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.17 |
ccAPPolicyBasicRatesFHThe Basic Rate set for FH radios which shall be governed by this policy.
Valid values are any combination of 1 and 2rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.18 |
ccAPPolicySupportedRatesFHThe Supported Rate set for FH radios which shall be governed by this policy.
Valid values are any combination of 1 and 2, or blankrw DisplayString .1.3.6.1.4.1.388.6.2.11.1.19 |
ccAPPolicyBasicRates11gThe Basic Rate set for 11g radios that shall be governed by this policy.
Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.20 |
ccAPPolicySupportedRates11gThe Supported Rate set for 11g radios that shall be governed by this policy.
Valid values could be any combination of 1,2,5.5,11,6, 9,12,18,24,36,48,54 or blank.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.21 |
ccAPPolicyNonSpectrumMgmtAllow non DFC/TPC MU to associate when spectrum management
is required. Valid values:true,false.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.22 |
ccAPPolicyAddAllWlanAdd a WLAN to a Access Port Policy, WLAN added should be a valid WLAN and should
not have already been added to this policy. Upto 16 WLANs can be added to a AP Policy.
A get on this object returns nothing. The WLAN added will be added to all the mappings.
Use ccAPPolicyAddRemWLAN table for select/unselect a WLAN for mapping, and ccAPPolicyWLANTable
for bandwith, bss etc.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.23 |
ccAPPolicyRemAllWlanRemoves a WLAN from a Access Port Policy. The WLAN to be removed should have already
been added to this policy. Thw WLAN will be removed from all the mappings and the
corresponding primary settings will be reset.rw DisplayString .1.3.6.1.4.1.388.6.2.11.1.24 |
ccAPPolicyWMEEnableDescription.
Enable/Disable of WME for APPolicyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.11.1.25 |
ccAPPolicyWMEProfileDescription.
WME Profile of APpolicy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.11.1.26 |
ccAPPolicyDTIM2Description.rw INTEGER .1.3.6.1.4.1.388.6.2.11.1.27 |
ccAPPolicyDTIM3Description.rw INTEGER .1.3.6.1.4.1.388.6.2.11.1.28 |
ccAPPolicyDTIM4Description.rw INTEGER .1.3.6.1.4.1.388.6.2.11.1.29 |
ccEPTableEtherPorts entries. SEQUENCE OF CcEPEntry .1.3.6.1.4.1.388.6.2.12 |
ccEPEntryAn ethernet port configuration entry. CcEPEntry .1.3.6.1.4.1.388.6.2.12.1 |
ccEPIndexThe Index for the Ethernet port.ro INTEGER .1.3.6.1.4.1.388.6.2.12.1.1 |
ccEPNicThis number indicates an index of NIC cards in the system.ro INTEGER .1.3.6.1.4.1.388.6.2.12.1.2 |
ccEPNameThe Name of this ethernet port.ro DisplayString .1.3.6.1.4.1.388.6.2.12.1.3 |
ccEPDescThe detailed description for the ethernet port. The Maximum length of the
description can be 128 characters. Note that the following characters cannot be part
of description - ',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.2.12.1.4 |
ccEPMacAddrThe Mac address for the Ethernet port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.5 |
ccEPEnableEnable/Disable the ethernet port to be a 802.1q Trunk port.
Syntax:For enabling <1,PrimaryVLanId>
For disabling <0>.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.6 |
ccEPSpeedThe speed of the ethernet port, such as 10 means the 10 Mps or 100 means 100 Mps.rodeprecated INTEGER .1.3.6.1.4.1.388.6.2.12.1.7 |
ccEPEnableDHCPEnable/Disable DHCP server for this Ethernet port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.8 |
ccEPIPAddrThe IP address of Ethernet port.rw IpAddress .1.3.6.1.4.1.388.6.2.12.1.9 |
ccEPNetMaskThe netmask address for the Ethernet port.rw IpAddress .1.3.6.1.4.1.388.6.2.12.1.10 |
ccEPDnsCountThe number of DNS used by the ethernet port.ro INTEGER .1.3.6.1.4.1.388.6.2.12.1.13 |
ccEPDnsListA list of DNS address for Ethernet port.ro DisplayString .1.3.6.1.4.1.388.6.2.12.1.14 |
ccEPPrimaryVidPrimary VLANId for this etherport.
Note:
0 or 4096 means non-trunked(no VLAN)rw INTEGER .1.3.6.1.4.1.388.6.2.12.1.15 |
ccEPOnlinefalse(2) means the online status of the ethernet port is NOT Active.
true(1) means the ethernet port is Active.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.16 |
ccEPDisplayNameThe user-friendly name of the Ethernet Port.ro DisplayString .1.3.6.1.4.1.388.6.2.12.1.17 |
ccEPUptimeThe time elapsed since the EtherPort has been up.ro DisplayString .1.3.6.1.4.1.388.6.2.12.1.18 |
ccEPTxThe number of output packets transmitted.ro Counter32 .1.3.6.1.4.1.388.6.2.12.1.19 |
ccEPRxThe number of input packets received.ro Counter32 .1.3.6.1.4.1.388.6.2.12.1.20 |
ccEPDomainThe domain name on this Ethernet Port.
Note that only the following characters are allowed in the domain name:
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz._-
Also, '_' , '-' and '.' cannot be the first or last character of the domain name.
Note that changing the domain name will require the KDC configuration to be recreated
if it is currently configured.rw DisplayString .1.3.6.1.4.1.388.6.2.12.1.21 |
ccEPGatewayThe gateway address being used by the Ethernet port.
Note:To add a gateway use ccTaf OID.ro IpAddress .1.3.6.1.4.1.388.6.2.12.1.22 |
ccEPCFGModeThe configured mode of this Etherport.
Valid inputs are : '10_half','10_full','100_half',
'100_full','auto'.rw DisplayString .1.3.6.1.4.1.388.6.2.12.1.23 |
ccEPDuplexNegotiated mode - duplexro DisplayString .1.3.6.1.4.1.388.6.2.12.1.24 |
ccEPModeNegotiated mode - speedro DisplayString .1.3.6.1.4.1.388.6.2.12.1.25 |
ccEPDhcpPriVlanDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.26 |
ccEPDDNSStatusEnable (1) / Disable (2) DDNS updates by DHCP Serverrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.27 |
ccEPDDNSttlTTL for DDNSrw Integer32 .1.3.6.1.4.1.388.6.2.12.1.28 |
ccEPDDNSUpdateAllUpdate all DDNS entriesrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.29 |
ccEPDDNSMUserStatusEnable (1) / Disable (2) RFC 3004 Multiple User Classrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.30 |
ccEPDDNSDomainNamethe domain to be updated by DDNSrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.12.1.31 |
ccEPPTableA list of Ethernet port policy entries. SEQUENCE OF CcEPPEntry .1.3.6.1.4.1.388.6.2.13 |
ccEPPEntryAn Ethernet port policy entry. CcEPPEntry .1.3.6.1.4.1.388.6.2.13.1 |
ccEPPIndexThe Index for the Ethernet policy.ro INTEGER .1.3.6.1.4.1.388.6.2.13.1.1 |
ccEPPNameEthernet policy name for one record.ro DisplayString .1.3.6.1.4.1.388.6.2.13.1.2 |
ccEPPAliasThe Alias for this EtherPort Policy. The Maximum length of the EP Policy Name
can be 50 characters. Note that the following characters cannot be part
of EP Policy Name field - ',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.2.13.1.3 |
ccEPPDescA description about this ethernet policy. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be part
of description ',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.2.13.1.4 |
ccEPPRonnicThis object indicates a NIC port number through which
the WS-5000 Wireless Switch will talk to the rest of network. That means,
in case of NO VLAN, every incoming packet will go out at this
NIC port number.rw INTEGER .1.3.6.1.4.1.388.6.2.13.1.5 |
ccEPPVlanCountThe number of VLANs attached to the Ethernet policy.ro INTEGER .1.3.6.1.4.1.388.6.2.13.1.6 |
ccEPPVlanListShow a list of VLAN objects attatched to this ethernet policy.
Display Format
LAN1,LAN2,VLAN:Interface numberro DisplayString .1.3.6.1.4.1.388.6.2.13.1.7 |
ccEPPCreateNewVlanCreate a new VLAN in this EtherPort Policy.
The input has to be of the format: <VlanID,NicNumber>,
where VlanID can be any integer from 1 through 4095,
and NicNumber is the etherport on which this VLAN is set.
The NicNumber can be either '1','2', or 'all'.
1 as the NicNumber stands for Ethernet1,
2 as the NicNumber stands for Ethernet2,
and 'all' stands for both.
Note that if the etherport on which this VLAN is to be set,
is a non-trunked port, then the VLAN creation will fail.
To trunk an etherport, SET the Primary VlanId of that
etherport to any integer from 1 through 4095.rw DisplayString .1.3.6.1.4.1.388.6.2.13.1.8 |
ccEPPRemVlanRemove one VLAN from this Etherport policy.
Only the Vlan Id needs to be input for removalrw DisplayString .1.3.6.1.4.1.388.6.2.13.1.9 |
ccEPPDropVlanDrop all the VLANs for this Etherpolicy. A 'true' does the jobrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.13.1.10 |
ccdot11FHPhyTableThe table for FH specific configuration parameters SEQUENCE OF Ccdot11FHPhyEntry .1.3.6.1.4.1.388.6.2.14 |
ccdot11FHPhyEntryAn entry in the FH Phy Table. Ccdot11FHPhyEntry .1.3.6.1.4.1.388.6.2.14.1 |
ccdot11FHIndexThe index of this FH radio. Integer32 .1.3.6.1.4.1.388.6.2.14.1.1 |
ccdot11FHHopTimeThe time in microseconds for the PMD to change from channel 2
to channel 80.ro Integer32 .1.3.6.1.4.1.388.6.2.14.1.2 |
ccdot11FHCurrentChannelNumberThe current channel number of the frequency output by the RF synthesizer.ro Integer32 .1.3.6.1.4.1.388.6.2.14.1.3 |
ccdot11FHMaxDwellTimeThe maximum time in TU that the transmitter is permitted to operate on a single channel.ro Integer32 .1.3.6.1.4.1.388.6.2.14.1.4 |
ccdot11FHCurrentDwellTimeThe current time in TU that the transmitter shall operate on a single channel, as set by the MAC.
The valid range is from 25 to 1000 milliseconds (both inclusive). A value of 65535 returned by the
switch indicates that there is no value set for this variable.rw Integer32 .1.3.6.1.4.1.388.6.2.14.1.5 |
ccdot11FHCurrentSetThe current set of patterns the PHY LME is using to determine the hopping sequence.
A value of 255 returned by the
switch indicates that there is no value set for this variable.rw Integer32 .1.3.6.1.4.1.388.6.2.14.1.6 |
ccdot11FHCurrentPatternThe current pattern the PHY LME is using to determine the hop sequence.
A value of 255 returned by the
switch indicates that there is no value set for this variable.rw Integer32 .1.3.6.1.4.1.388.6.2.14.1.7 |
ccdot11FHCurrentIndexThe current index value the PHY LME is using the determine the CurrentChannelNumber.ro Integer32 .1.3.6.1.4.1.388.6.2.14.1.8 |
ccAPPolicyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.2.16 |
ccAPPolicyAddRemWLANTableA table for adding and removing WLANs SEQUENCE OF CcAPPolicyAddRemWLANEntry .1.3.6.1.4.1.388.6.2.16.2 |
ccAPPolicyAddRemWLANEntryA table for adding and removing WLANs. Select/Unselect and WLAN for a mapping. The second index is the mapping.
1 as its value indicates addition/removal of a WLAN to/from an AP100 (4BSS-4ESS mapping).
2 as its value indicates addition/removal of a WLAN to/from an FH radio (1BSS-1ESS mapping).
3 as its value indicates addition/removal of a WLAN from an AP200-11a radio (1BSS-16ESS mapping).
4 as its value indicates addition/removal of a WLAN from an AP200-11b radio, AP300, AP4121 (4BSS-16ESS mapping). CcAPPolicyAddRemWLANEntry .1.3.6.1.4.1.388.6.2.16.2.1 |
ccAPPolicyDeviceTypeThe type of mapping to/from which WLANs will be selected/unselected. INTEGER .1.3.6.1.4.1.388.6.2.16.2.1.1 |
ccAPPolicyAddWLANAdd a WLAN to this particular APPolicy and device.
The format for entering the input is
<existing Wlan,bandwidth>, where the sum of all bandwidth for
this AP policy and Device Type should be less than or equal to 100%.
Also, the bandwidth for any WLAN cannot be less than 5%.
Note:
1. Default AP Policy cannot be edited.
2. Always set Bandwidth as 100% if you are adding WLAN to an FH port.
Setting the bandwidth to less than 100% for FH results in an error.
This also means that at any given instant, no more than one WLANs
can be added to an FH Port.rodeprecated DisplayString .1.3.6.1.4.1.388.6.2.16.2.1.2 |
ccAPPolicyRemWLANRemove a WLAN from this particular APPolicy and device.
Note:Default AP Policy cannot be editedrodeprecated DisplayString .1.3.6.1.4.1.388.6.2.16.2.1.3 |
ccAPPolicySelectWLANSelect a WLAN for this mapping. The WLAN should already be added
to this Access Port Policy for mapping.
(4BSS-4ESS) :Four WLANs can be selected, if full unselect a existing
WLAN before selecting a different one.
(1BSS-1ESS) :One WLAN can be selected for this mapping, if already
selected unselect a existing WLAN before selecting a
different one.
(1BSS-16ESS):Only one WLAN can be made primary so selected WLAN is
set as primary.
(4BSS-16ESS):One can Select upto maximum of four WLAN as primary.rw DisplayString .1.3.6.1.4.1.388.6.2.16.2.1.4 |
ccAPPolicyUnselectWLANUnSelect a WLAN for this mapping. The WLAN should already have been selected for this mapping.
WLAN can be unselected for (4BSS-4ESS) and (1BSS-1ESS) mapping only.rw DisplayString .1.3.6.1.4.1.388.6.2.16.2.1.5 |
ccAPPolicyWLANTableA table for setting attributes of a wlan for a particular mapping for a Access Port Policy. SEQUENCE OF CcAPPolicyWLANEntry .1.3.6.1.4.1.388.6.2.16.3 |
ccAPPolicyWLANEntryThis table allows Get/Set attributes of a WLAN for a mapping for a particular AP policy.
First index is a AP Policy, Second index is the Mapping
1 indicates mapping to/from an AP100 (4BSS-4ESS mapping).
2 indicates mapping of a WLAN to/from an FH radio (1BSS-1ESS mapping).
3 indicates mapping of a WLAN from an AP200-11a radio (1BSS-16ESS mapping).
4 indicates mapping of a WLAN from an AP200-11b radio, AP300, AP4121 (4BSS-16ESS mapping).
Third index is the WLAN. CcAPPolicyWLANEntry .1.3.6.1.4.1.388.6.2.16.3.1 |
ccAPPolicyWLANIndexThe index of this particular WLAN. INTEGER .1.3.6.1.4.1.388.6.2.16.3.1.1 |
ccAPPolicyWLANName of this particular WLAN which belongs to this APPolicy and this
devicetype.ro DisplayString .1.3.6.1.4.1.388.6.2.16.3.1.2 |
ccAPPolicyWLANBWThe bandwidth allocated to this particular WLAN, which belongs to this
APPolicy and this devicetype. Bandwidth of an FH port is 100% by default,
and any attempt to set the bandwidth of an FH port results in an error.rw DisplayString .1.3.6.1.4.1.388.6.2.16.3.1.3 |
ccAPPolicyWLANNPThe Network Policy which belongs to this particular WLAN, which belongs
to this APPolicy. WLAN must already be configured for this AP Policy to
set the Network Policy. SETting of Network Policy takes effect across all the devices,
and not for a particular device. As an example, if you SET
the Network Policy of a WLAN for the devicetype AP200, the policy will be applied to
all the devices of that WLAN. Note that the GET continues to be per device.
In order to remove the Network Policy, just leave the field blank
while SETting (send an empty string)rw DisplayString .1.3.6.1.4.1.388.6.2.16.3.1.4 |
ccAPPolicyWLANBSSThe BSS of this particular WLAN, which belongs to this APPolicy and this
devicetype. BSS ID for AP 100, FHSS, AP200a is set to 1 by default and
cannot be modifed.
BSS ID of AP200b can be set from 1 through 4.rw DisplayString .1.3.6.1.4.1.388.6.2.16.3.1.5 |
ccAPPolicyBSSTableA table to GET/SET the primary wlan property of a particular bss and device type SEQUENCE OF CcAPPolicyBSSEntry .1.3.6.1.4.1.388.6.2.16.4 |
ccAPPolicyBSSEntryThis table will GET/SET the primary wlan property 'per APPolicy, per devicetype,per BSS.
ccAPPolicyIndex and ccDeviceType are defined earlier. ccAPPolicyBSS is the current BSS whose
primary WLAN is being GET/SET.
1 indicates mapping to/from an AP100 (4BSS-4ESS mapping).
2 indicates mapping of a WLAN to/from an FH radio (1BSS-1ESS mapping).
3 indicates mapping of a WLAN from an AP200-11a radio (1BSS-16ESS mapping).
4 indicates mapping of a WLAN from an AP200-11b radio, AP300, AP4121 (4BSS-16ESS mapping). CcAPPolicyBSSEntry .1.3.6.1.4.1.388.6.2.16.4.1 |
ccAPPolicyBSSThe BSS for which the primary wlan property needs to be get/set DisplayString .1.3.6.1.4.1.388.6.2.16.4.1.1 |
ccAPPolicyPrimaryWLANThe primary wlan property for this particular APPolicy, per
device type and per BSS, the WLAN marked as primary should already
be added as a wlan into this policy.
Primary WLAN cannot be set for any device except for (1BSS-16ESS) and (4BSS-16ESS) mappings.rw DisplayString .1.3.6.1.4.1.388.6.2.16.4.1.2 |
ccFWLANTableA list of LAN descriptors.
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
this table will not return anything and the set
operation over any OID under this table will return
an error message- No creation. SEQUENCE OF CcFWLANEntry .1.3.6.1.4.1.388.6.2.17 |
ccFWLANEntryA LAN descriptor. CcFWLANEntry .1.3.6.1.4.1.388.6.2.17.1 |
ccLANIndexThe Index for the LAN descriptor.ro INTEGER .1.3.6.1.4.1.388.6.2.17.1.1 |
ccLANNameLAN name.ro OCTET STRING .1.3.6.1.4.1.388.6.2.17.1.2 |
ccLANDescLAN description.rw OCTET STRING .1.3.6.1.4.1.388.6.2.17.1.3 |
ccLANNATCountThe number of NAT entries attached to a LAN.ro INTEGER .1.3.6.1.4.1.388.6.2.17.1.4 |
ccLANAddNATCreate a new NAT entry for this LAN.
Syntax: <RemoteRealIP,LocalNatIP>
OR
<RemoteRealIP,LocalNatIP,NumberOfEntries>
The agent will execute the appropriate code depending on
the number of input parameters.
Valid input values for 'NumberOfEntries' are 0 to 250.
The maximum number of NAT mappings allowed are 250.
Possible reasons for Commit Fail:-
1.If number of entries are not in the range 0-250.
2.If number of NAT mappings are greater than 250.
3 If the NAT mappings are duplicate.
Note:It takes approximately 10 secs to complete the set operation
for 250 entries.rw OCTET STRING .1.3.6.1.4.1.388.6.2.17.1.5 |
ccLANRemNATRemove one NAT entry from this LAN.
Syntax: <RemoteRealIP,LocalNatIP>
OR
<RemoteRealIP,LocalNatIP,NumberOfEntries>
The agent will execute the appropriate code depending on
the number of input parameters.rw OCTET STRING .1.3.6.1.4.1.388.6.2.17.1.6 |
ccLANEpLAN Ethernet Port. Enter an ethernet port number.
Valid port numbers are 1 and 2 (for the two
physical ethernet ports) as well as 3 (for
a virtual VPN port connection).
0 as a port number removes Ethernet Port.rw INTEGER .1.3.6.1.4.1.388.6.2.17.1.7 |
ccLANNpNetwork policy associated with this LAN. Enter
either the name of an existing network policy,
or enter 'remove' to set the current value to
blank.rw OCTET STRING .1.3.6.1.4.1.388.6.2.17.1.8 |
ccLANPfAllowPort Filter for this LAN. Valid input values are
https ,http ,ftp and telnet .The input values are case sensitive.
Only one value can be set at a time.rw DisplayString .1.3.6.1.4.1.388.6.2.17.1.9 |
ccLANPfDenyPort Filter for this LAN.
Valid input values are https ,http ,ftp and telnet and web. Only one value
can be given at a time.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.17.1.10 |
ccFWLANNATTableA list of LAN NAT Entries. This is a
dual-index table, NAT entries for all
LANs are displayed. A single entry of
0.0.0.0 for a LAN means that LAN has
no NAT entries.
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
this table will not return anything and the set
operation over any OID under this table will return
an error message- No creation. SEQUENCE OF CcFWLANNATEntry .1.3.6.1.4.1.388.6.2.18 |
ccFWLANNATEntryA LAN descriptor. CcFWLANNATEntry .1.3.6.1.4.1.388.6.2.18.1 |
ccLANNATIndexThe Index for the NAT entry.ro OCTET STRING .1.3.6.1.4.1.388.6.2.18.1.1 |
ccLANNATRemoteRealIPThe Remote Real IP address in a NAT translation.ro IpAddress .1.3.6.1.4.1.388.6.2.18.1.2 |
ccLANNATLocalNatIPThe Local NAT IP address in a NAT translation.ro IpAddress .1.3.6.1.4.1.388.6.2.18.1.3 |
ccRouteTableDisplay current network routing table. SEQUENCE OF CcRouteEntry .1.3.6.1.4.1.388.6.2.19 |
ccRouteEntryA Route entry. CcRouteEntry .1.3.6.1.4.1.388.6.2.19.1 |
ccRouteIndexThe Index for the Route entry.ro INTEGER .1.3.6.1.4.1.388.6.2.19.1.1 |
ccRouteDestThe Destination for the Route entry.ro OCTET STRING .1.3.6.1.4.1.388.6.2.19.1.2 |
ccRouteGatewayThe Gateway for the Route entry.ro OCTET STRING .1.3.6.1.4.1.388.6.2.19.1.3 |
ccRouteFlagsThe Flags for the Route entry.
These are standard 'netstat' flags,
including (but not limited to):
C - Generate new routes on use
G - Destination requires forwarding by intermediary
H - Host entry (net otherwise)
L - Valid protocol to link address translation
R - Host or net unreachable
U - Route usablero OCTET STRING .1.3.6.1.4.1.388.6.2.19.1.4 |
ccRouteRefsThe number of references to the Route entry.ro INTEGER .1.3.6.1.4.1.388.6.2.19.1.5 |
ccRouteUseThe Use count for the Route entry.ro INTEGER .1.3.6.1.4.1.388.6.2.19.1.6 |
ccRouteInterfaceThe Interface for the Route entry.ro OCTET STRING .1.3.6.1.4.1.388.6.2.19.1.7 |
ccRouteGenMaskThe netmask for the Route entryro OCTET STRING .1.3.6.1.4.1.388.6.2.19.1.8 |
ccRouteAddObjAdd route to the network routing table.
Syntax:host <host addr> <gateway>
or
net <network addr> <gateway> netmask <netmask>rw OCTET STRING .1.3.6.1.4.1.388.6.2.20 |
ccRouteRemObjRemove route from the network routing table.
Syntax:host <host addr> <gateway>
or
net <network addr> <gateway> netmask <netmask>rw OCTET STRING .1.3.6.1.4.1.388.6.2.21 |
ccRouteFlushRemove all routes from the network routing table.
when set to Truerw DoActionNow .1.3.6.1.4.1.388.6.2.22 |
ccDhcpSrvNIC1 OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.2.23 |
ccDhcp1SrvEnable(1)/Disable(2) DHCP Server on Ethernet 1.
Note:DHCP Server can be enabled only on single
interface at a time
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
ccDhcpSrvNIC1 will not return anything and the set
operation over any OID under this table will return
an error message- No creation.rw INTEGER .1.3.6.1.4.1.388.6.2.23.1 |
ccDhcp1SubnetThe subnet on Ethernet port 1 that the
DHCP Server serves IP address for.ro IpAddress .1.3.6.1.4.1.388.6.2.23.2 |
ccDhcp1NetmaskThe netmask address for the Ethernet port 1
that the DHCP Server serves IP addresses for.ro IpAddress .1.3.6.1.4.1.388.6.2.23.3 |
ccDhcp1BcastIPThe broadcast IP address for the subnet the
DHCP Server serves on Ethernet Port 1.ro IpAddress .1.3.6.1.4.1.388.6.2.23.4 |
ccDhcp1RouterIPThe default Router/Gateway IP address for the subnet
the DHCP Server serves on Ethernet Port 1. To remove
the router option set SNMP Set Value to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.388.6.2.23.5 |
ccDhcp1PriDNSIPThe Primary DNS IP address for the subnet
the DHCP Server serves on Ethernet Port 1. To
remove domain-name-servers option, set SNMP Set
Value to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.388.6.2.23.6 |
ccDhcp1SecDNSIPThe Secondary DNS IP address for the subnet
the DHCP Server serves on Ethernet Port 1. To
remove Secondary DNS IP, set SNMP Set Value to
0.0.0.0 .rw IpAddress .1.3.6.1.4.1.388.6.2.23.7 |
ccDhcp1DomainNameThe Domain Name for the subnet the DHCP Server
serves on Ethernet Port 1. To remove domain-name
option, set SNMP Set Value to 0.rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.8 |
ccDhcp1DefLeaseThe Default lease time of the IP address for
the subnet the DHCP Server serves on
Ethernet Port 1. To set to default-lease-time option,
set SNMP Set Value to 0 it automatically sets it to
21600(default value).rw Integer32 .1.3.6.1.4.1.388.6.2.23.9 |
ccDhcp1MaxLeaseThe Maximum lease time of the IP address for
the subnet the DHCP Server serves on
Ethernet Port 1. To set to default max-lease-time option,
set SNMP Set Value to 0 it automatically sets it to
21600(default value).rw Integer32 .1.3.6.1.4.1.388.6.2.23.10 |
ccDhcp1IPRangeTableA table of DHCP IP Ranges for Ethernet 1. SEQUENCE OF CcDhcp1IPRangeEntry .1.3.6.1.4.1.388.6.2.23.11 |
ccDhcp1IPRangeEntryA DHCP IP Range entry. CcDhcp1IPRangeEntry .1.3.6.1.4.1.388.6.2.23.11.1 |
ccDhcp1RangeIndexAn integer index for ccDhcp1IPRangeTable.ro INTEGER .1.3.6.1.4.1.388.6.2.23.11.1.1 |
ccDhcp1RangeStartIPThe DHCP IP Range Start IP Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.11.1.2 |
ccDhcp1RangeEndIPThe DHCP IP Range End IP Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.11.1.3 |
ccDhcp1AddIPRangeObjAdd a DHCP dynamically assignable IP address range.
This is a write-only object. Data input syntax:
start_ip[, end_ip].rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.12 |
ccDhcp1RemIPRangeObjRemove a dynamically assignable DHCP IP address range.
This is a write-only object. Data input syntax:
start_ip[, end_ip].rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.13 |
ccDhcp1StaticIPTableA table of DHCP Static Entries for Ethernet 1. SEQUENCE OF CcDhcp1StaticIPEntry .1.3.6.1.4.1.388.6.2.23.14 |
ccDhcp1StaticIPEntryA DHCP Static IP entry. CcDhcp1StaticIPEntry .1.3.6.1.4.1.388.6.2.23.14.1 |
ccDhcp1StaticIPIndexAn integer index for ccDhcp2StaticIPTable.ro INTEGER .1.3.6.1.4.1.388.6.2.23.14.1.1 |
ccDhcp1StaticIPThe DHCP Static Entry IP Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.14.1.2 |
ccDhcp1StaticMacThe DHCP Static Entry MAC Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.14.1.3 |
ccDhcp1StaticHostThe DHCP Static Entry host name.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.14.1.4 |
ccDhcp1AddStaticIPObjAdd a DHCP statically assigned IP address.
This is a write-only object. Data input syntax:
ip_address, mac_address, host_name.rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.15 |
ccDhcp1RemStaticIPObjRemove a DHCP statically assigned IP address.
This is a write-only object. Data input syntax:
ip_address.rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.16 |
ccDhcp1OptionTableA table of DHCP Options for Ethernet 1. SEQUENCE OF CcDhcp1OptionEntry .1.3.6.1.4.1.388.6.2.23.17 |
ccDhcp1OptionEntryA DHCP Option entry. CcDhcp1OptionEntry .1.3.6.1.4.1.388.6.2.23.17.1 |
ccDhcp1OptionIndexAn integer index for ccDhcp1OptionTable.ro INTEGER .1.3.6.1.4.1.388.6.2.23.17.1.1 |
ccDhcp1OptionNameThe DHCP Option name.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.17.1.2 |
ccDhcp1OptionCodeThe DHCP Option Code.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.17.1.3 |
ccDhcp1OptionTypeThe DHCP Option type.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.17.1.4 |
ccDhcp1OptionValueThe DHCP option value.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.17.1.5 |
ccDhcp1AddOptionObjAdd a DHCP option. This is a write-only object.
Data input syntax:
option_name, option_code, value_type, value
value_type = ip-address | textrw OCTET STRING .1.3.6.1.4.1.388.6.2.23.18 |
ccDhcp1RemOptionObjRemove a DHCP option.
This is a write-only object. Data input syntax:
option_name.rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.19 |
ccDhcp1LeasesTableA table of DHCP Leases for Ethernet 1. SEQUENCE OF CcDhcp1LeasesEntry .1.3.6.1.4.1.388.6.2.23.20 |
ccDhcp1LeasesEntryA DHCP lease entry. CcDhcp1LeasesEntry .1.3.6.1.4.1.388.6.2.23.20.1 |
ccDhcp1LeaseIndexAn integer index for ccDhcpLeaseTable1.ro INTEGER .1.3.6.1.4.1.388.6.2.23.20.1.1 |
ccDhcp1LeaseIPThe DHCP lease IP address assigned to MU.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.20.1.2 |
ccDhcp1LeaseMacThe DHCP lease MAC address for MU.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.20.1.3 |
ccDhcp1LeaseStartTimeThe DHCP lease start time.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.20.1.4 |
ccDhcp1LeaseEndTimeThe DHCP lease expiration time.ro OCTET STRING .1.3.6.1.4.1.388.6.2.23.20.1.5 |
ccDhcp1RemLeaseObjRemove a DHCP lease.
This is a write-only object. Data input syntax:
ip_address.rw OCTET STRING .1.3.6.1.4.1.388.6.2.23.21 |
ccDhcp1RemStaticHostRemove a DHCP statically assigned Host name.
Data input syntax: Host name.
A get operation on ccDhcp1RemStaticHost displays
all the available StaticHost's.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.23.22 |
ccDhcpSrvNIC2 OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.2.24 |
ccDhcp2SrvEnable(1)/Disable(2) DHCP Server on Ethernet 2.
Note:DHCP Server can be enabled only on single
interface at a time.
Note:This Feature is VPN dependent feature hence
if vpnsupport is not enabled then the walk over
ccDhcpSrvNIC2 will not return anything and the set
operation over any OID under this table will return
an error message- No creation.rw INTEGER .1.3.6.1.4.1.388.6.2.24.1 |
ccDhcp2SubnetThe subnet on Ethernet port 2 that the
DHCP Server serves IP address for.ro IpAddress .1.3.6.1.4.1.388.6.2.24.2 |
ccDhcp2NetmaskThe netmask address for the Ethernet port 2
that the DHCP Server serves IP addresses for.ro IpAddress .1.3.6.1.4.1.388.6.2.24.3 |
ccDhcp2BcastIPThe broadcast IP address for the subnet the
DHCP Server serves on Ethernet Port 2.ro IpAddress .1.3.6.1.4.1.388.6.2.24.4 |
ccDhcp2RouterIPThe default Router/Gateway IP address for the subnet
the DHCP Server serves on Ethernet Port 2. To remove
the router option set SNMP Set Value to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.388.6.2.24.5 |
ccDhcp2PriDNSIPThe Primary DNS IP address for the subnet
the DHCP Server serves on Ethernet Port 2. To
remove domain-name-servers option, set SNMP Set
Value to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.388.6.2.24.6 |
ccDhcp2SecDNSIPThe Secondary DNS IP address for the subnet
the DHCP Server serves on Ethernet Port 2. To
remove Secondary DNS IP, set SNMP Set Value
to 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.388.6.2.24.7 |
ccDhcp2DomainNameThe Domain Name for the subnet the DHCP Server
serves on Ethernet Port 2. To remove domain-name
option, set SNMP Set Value to 0.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.8 |
ccDhcp2DefLeaseThe Default lease time of the IP address for
the subnet the DHCP Server serves on
Ethernet Port 2. To set to default-lease-time option,
set SNMP Set Value to 0 it automatically sets it to
21600(default value).rw Integer32 .1.3.6.1.4.1.388.6.2.24.9 |
ccDhcp2MaxLeaseThe Maximum lease time of the IP address for
the subnet the DHCP Server serves on
Ethernet Port 2. To set to max-lease-time option,
set SNMP Set Value to 0 it automatically sets it to
21600(default value).rw Integer32 .1.3.6.1.4.1.388.6.2.24.10 |
ccDhcp2IPRangeTableA table of DHCP IP Ranges for Ethernet 2. SEQUENCE OF CcDhcp2IPRangeEntry .1.3.6.1.4.1.388.6.2.24.11 |
ccDhcp2IPRangeEntryA DHCP IP Range entry. CcDhcp2IPRangeEntry .1.3.6.1.4.1.388.6.2.24.11.1 |
ccDhcp2RangeIndexAn integer index for ccDhcp1IPRangeTable.ro INTEGER .1.3.6.1.4.1.388.6.2.24.11.1.1 |
ccDhcp2RangeStartIPThe DHCP IP Range Start IP Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.11.1.2 |
ccDhcp2RangeEndIPThe DHCP IP Range End IP Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.11.1.3 |
ccDhcp2AddIPRangeObjAdd a DHCP dynamically assignable IP address range.
This is a write-only object. Data input syntax:
start_ip[, end_ip].rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.12 |
ccDhcp2RemIPRangeObjRemove a dynamically assignable DHCP IP address range.
This is a write-only object. Data input syntax:
start_ip[, end_ip].rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.13 |
ccDhcp2StaticIPTableA table of DHCP Static Entries for Ethernet 2. SEQUENCE OF CcDhcp2StaticIPEntry .1.3.6.1.4.1.388.6.2.24.14 |
ccDhcp2StaticIPEntryA DHCP Static IP entry. CcDhcp2StaticIPEntry .1.3.6.1.4.1.388.6.2.24.14.1 |
ccDhcp2StaticIPIndexAn integer index for ccDhcp2StaticIPTable.ro INTEGER .1.3.6.1.4.1.388.6.2.24.14.1.1 |
ccDhcp2StaticIPThe DHCP Static Entry IP Address.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.14.1.2 |
ccDhcp2StaticMacThe DHCP Static Entry MAC Address.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.14.1.3 |
ccDhcp2StaticHostThe DHCP Static Entry host name.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.14.1.4 |
ccDhcp2AddStaticIPObjAdd a DHCP statically assigned IP address.
This is a write-only object. Data input syntax:
ip_address, mac_address, host_name.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.15 |
ccDhcp2RemStaticIPObjRemove a DHCP statically assigned IP address.
This is a write-only object. Data input syntax:
ip_address.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.16 |
ccDhcp2OptionTableA table of DHCP Options for Ethernet 2. SEQUENCE OF CcDhcp2OptionEntry .1.3.6.1.4.1.388.6.2.24.17 |
ccDhcp2OptionEntryA DHCP Option entry. CcDhcp2OptionEntry .1.3.6.1.4.1.388.6.2.24.17.1 |
ccDhcp2OptionIndexAn integer index for ccDhcp2OptionTable.ro INTEGER .1.3.6.1.4.1.388.6.2.24.17.1.1 |
ccDhcp2OptionNameThe DHCP Option name.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.17.1.2 |
ccDhcp2OptionCodeThe DHCP Option Code.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.17.1.3 |
ccDhcp2OptionTypeThe DHCP Option type.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.17.1.4 |
ccDhcp2OptionValueThe DHCP option value.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.17.1.5 |
ccDhcp2AddOptionObjAdd a DHCP option. This is a write-only object.
Data input syntax:
option_name, option_code, value_type, value
value_type = ip-address | textrw OCTET STRING .1.3.6.1.4.1.388.6.2.24.18 |
ccDhcp2RemOptionObjRemove a DHCP option.
This is a write-only object. Data input syntax:
option_name.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.19 |
ccDhcp2LeasesTableA table of DHCP Leases for Ethernet 2. SEQUENCE OF CcDhcp2LeasesEntry .1.3.6.1.4.1.388.6.2.24.20 |
ccDhcp2LeasesEntryA DHCP lease entry. CcDhcp2LeasesEntry .1.3.6.1.4.1.388.6.2.24.20.1 |
ccDhcp2LeaseIndexAn integer index for ccDhcp2LeaseTable.rw INTEGER .1.3.6.1.4.1.388.6.2.24.20.1.1 |
ccDhcp2LeaseIPThe DHCP lease IP address assigned to MU.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.20.1.2 |
ccDhcp2LeaseMacThe DHCP lease MAC address for MU.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.20.1.3 |
ccDhcp2LeaseStartTimeThe DHCP lease start time.ro OCTET STRING .1.3.6.1.4.1.388.6.2.24.20.1.4 |
ccDhcp2LeaseEndTimeThe DHCP lease expiration time.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.20.1.5 |
ccDhcp2RemLeaseObjRemove a DHCP lease.
This is a write-only object. Data input syntax:
ip_address.rw OCTET STRING .1.3.6.1.4.1.388.6.2.24.21 |
ccDhcp2RemStaticHostRemove a DHCP statically assigned Host name.
Data input syntax: Host name.
A get operation on ccDhcp2RemStaticHost displays
all the available StaticHost'srw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.2.24.22 |
symbolCCMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3 |
ccWLANAddObjAdd one WLAN Object into the WLAN Table. The Maximum length of the WLAN
Name can be 50 characters, Note that the following characters cannot be part
of WLAN Name field, double quotes,',.,\,& and #.rw DisplayString .1.3.6.1.4.1.388.6.3.1 |
ccWLANRemObjRemove one WLAN Object from the WLAN Table.The maximum number of
characters allowed is 50, and the following characters cannot be
part of the input string - ',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.2 |
ccUserAddObjAdd a user to the User Table. The Maximum length of the User name
can be 20 characters. Note that the following characters cannot be part
of User Name field - ',&,#,\,space, and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.3 |
ccUserRemObjRemove a user from the User Table.rw DisplayString .1.3.6.1.4.1.388.6.3.4 |
ccGraphAddObjAdd a Graph object to the Graph table.rw DisplayString .1.3.6.1.4.1.388.6.3.5 |
ccGraphRemObjRemove a Graph object from the Graph table.rw DisplayString .1.3.6.1.4.1.388.6.3.6 |
ccSecAddObjAdd a security object into the table.rw DisplayString .1.3.6.1.4.1.388.6.3.11 |
ccSecRemObjRemove a security object from the table.rw DisplayString .1.3.6.1.4.1.388.6.3.12 |
ccACLAddObjAdd an ACL object into the table.rw DisplayString .1.3.6.1.4.1.388.6.3.13 |
ccACLRemObjRemove an ACL object from the table.rw DisplayString .1.3.6.1.4.1.388.6.3.14 |
ccUserTableUser information table entries. SEQUENCE OF CcUserEntry .1.3.6.1.4.1.388.6.3.21 |
ccUserEntryUser Information entries. CcUserEntry .1.3.6.1.4.1.388.6.3.21.1 |
ccUserIDThe user name. Cannot
change the user id, but can achieve the same
goal through removing and recreating a new
user with a different name.ro DisplayString .1.3.6.1.4.1.388.6.3.21.1.1 |
ccUserFullNameThe full name of the user. The Maximum length of the User name
can be 20 characters. Note that the following characters cannot be part
of User Name field - ',&,#,space and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.21.1.2 |
ccUserPwdThe user login password to access Wireless Switch services.
The Maximum length of the Password is 20 characters.
Note that the following characters cannot be part of the password field - ',&,#,\,space and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.21.1.3 |
ccUserAdminRightSetting this object to the value <true(1)> gives the user admin
rights, <false(2)> takes away the admin rights from the user.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.21.1.4 |
ccUserProfileMgmtRightSetting this object to the value <true(1)> gives the user
Profile Management rights,
<false(2)> takes away the Profile Management rights from the user.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.21.1.5 |
ccUserSysAdminRightSetting this object to the value <true(1)> gives the user Sys-Admin
rights, <false(2)> takes away the Sys-Admin rights from the user.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.21.1.6 |
ccUserSNMPAdminRightSetting this object to the value <true(1)> gives the user SNMP-
Admin rights, <false(2)> takes away the SNMP-Admin rights from the
user.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.21.1.7 |
ccUserSecurityAdminRightSetting this object to the value <true(1)> gives the user Security-
Admin rights, <false(2)> takes away the Security-Admin rights from
the user.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.21.1.8 |
ccUserIndexThe index of the user table. INTEGER .1.3.6.1.4.1.388.6.3.21.1.10 |
ccWLANTableA list of WLAN Object entries. SEQUENCE OF CcWLANEntry .1.3.6.1.4.1.388.6.3.22 |
ccWLANEntryA WLAN Object entry. CcWLANEntry .1.3.6.1.4.1.388.6.3.22.1 |
ccWLANIndexThe index for this WLAN object.ro INTEGER .1.3.6.1.4.1.388.6.3.22.1.1 |
ccWLANNameThe WLAN object name. The Maximum length of the WLAN Name can be 50
characters. Note that the following characters cannot be part of WLAN
Name field - ',.,\,&,# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.2 |
ccESSIDThe ESSID for the interface.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.3 |
ccSecurityA security Policy to be used by this WLAN.
If your Network Manager/MIB Browser displays
an error message, it is likely that the security policy
being added is invalid. To find out what the problem could be
with this particular security policy, query the OID 'ccSecCheckValidity'
under ccSecurityTable, and make appropriate changes.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.4 |
ccACLEnabledEnable or Disable ACL feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.22.1.5 |
ccMaxMusThe maximum number of MUs supported by this WLAN.rw INTEGER .1.3.6.1.4.1.388.6.3.22.1.14 |
ccKerberosAuthNameThe name used for authenticating to a Kerberos Server.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.15 |
ccKerberosAuthPassThe password for authenticating to a Kerberos Server. The
minimum length of a password to 6 characters.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.16 |
ccWLANACLThe ACL used by this WLAN.
For removing the ACL from this WLAN,
just input an empty string.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.17 |
ccWLANIsAuthenticatedTells whether the WLAN is authenticated
or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.22.1.18 |
ccWLANMUTrafficChanges the results of an MU to MU commmunication.
0 indicates that MU to MU traffic is allowed,
1 indicates that it is not allowed
and 2 indicates that all MU to MU traffic is dropped.rw INTEGER .1.3.6.1.4.1.388.6.3.22.1.19 |
ccWLANSecuredBeacon'true' indicates that beacons need to be secured,
while 'false' allows them to be unsecured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.22.1.20 |
ccWLANCurrentMUThe current number of MUs on this WLANro INTEGER .1.3.6.1.4.1.388.6.3.22.1.21 |
ccWLANNetMaskThe Network Mask for the subnet.rw IpAddress .1.3.6.1.4.1.388.6.3.22.1.22 |
ccWLANDefaultRouteThe IP Address of the default route.rw IpAddress .1.3.6.1.4.1.388.6.3.22.1.23 |
ccWLANBCMC11AWLAN broadcast/multicast encryption type on 802.11a radios.ro EncrType .1.3.6.1.4.1.388.6.3.22.1.24 |
ccWLANBCMC11BWLAN broadcast/multicast encryption type on 802.11b radios.ro EncrType .1.3.6.1.4.1.388.6.3.22.1.25 |
ccWLANBCMCFHWLAN broadcast/multicast encryption type on FH radios.ro EncrType .1.3.6.1.4.1.388.6.3.22.1.26 |
ccBroadcastEssEnable (true)/Disable (false) Broadcast ESS feature for the WLAN.
Broadcast ESS feature implies that a probe request containing a zero length
SSID will be allowed to associate to the particular SSID that is
designated as the broadcast ESS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.22.1.27 |
ccWLANDescThe description of the WLAN. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be
part of description - ',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.22.1.28 |
ccWlanWMEEnableDescription.
Enable/Disable of WME for WLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.22.1.29 |
ccWlanWMEProfileDescription.
WME Profile for WLanrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.22.1.30 |
ccKnownCCTableA table of Known Wireless Switch entries SEQUENCE OF CcKnownCCEntry .1.3.6.1.4.1.388.6.3.23 |
ccKnownCCEntryThe entries of information about the known Wireless Switch. CcKnownCCEntry .1.3.6.1.4.1.388.6.3.23.1 |
ccKnownCCIndexAn index of the table.ro INTEGER .1.3.6.1.4.1.388.6.3.23.1.1 |
ccKnownCCNameA known Wireless Switch name.ro DisplayString .1.3.6.1.4.1.388.6.3.23.1.2 |
ccKnownCCMacA known Wireless Switch mac address.ro DisplayString .1.3.6.1.4.1.388.6.3.23.1.3 |
ccKnownAPTableA table of Known Access-Point entries. SEQUENCE OF CcKnownAPEntry .1.3.6.1.4.1.388.6.3.24 |
ccKnownAPEntryEntries of information about Known APs. CcKnownAPEntry .1.3.6.1.4.1.388.6.3.24.1 |
ccKnownAPIndexA index of the table.ro INTEGER .1.3.6.1.4.1.388.6.3.24.1.1 |
ccKnownAPMacA known AP mac address.ro DisplayString .1.3.6.1.4.1.388.6.3.24.1.2 |
ccKnownAPVerA known AP version.ro INTEGER .1.3.6.1.4.1.388.6.3.24.1.3 |
ccKnownAPIPA known AP IP address.ro IpAddress .1.3.6.1.4.1.388.6.3.24.1.4 |
ccKnownAPPriorityPriority for the known AP.ro INTEGER .1.3.6.1.4.1.388.6.3.24.1.5 |
ccKnownAPMusThe number of MUs associated with the known AP.ro INTEGER .1.3.6.1.4.1.388.6.3.24.1.6 |
ccKnownAPTypeThe known AP type .ro INTEGER .1.3.6.1.4.1.388.6.3.24.1.7 |
ccKnownAPAPVerThe known AP version.ro INTEGER .1.3.6.1.4.1.388.6.3.24.1.8 |
ccKnownAPEssidA known AP ESSID.ro DisplayString .1.3.6.1.4.1.388.6.3.24.1.9 |
ccGraphTableA list of Graph entries. SEQUENCE OF CcGraphEntry .1.3.6.1.4.1.388.6.3.25 |
ccGraphEntryGraph Object entries. CcGraphEntry .1.3.6.1.4.1.388.6.3.25.1 |
ccGraphIndexThe index of the graph.ro INTEGER .1.3.6.1.4.1.388.6.3.25.1.1 |
ccGraphNameThe name of the graph.rw DisplayString .1.3.6.1.4.1.388.6.3.25.1.2 |
ccGraphWlanIdA WLAN ID attached to this Graph.rw DisplayString .1.3.6.1.4.1.388.6.3.25.1.7 |
ccVLANTableA list of VLAN Object entries. SEQUENCE OF CcVLANEntry .1.3.6.1.4.1.388.6.3.26 |
ccVLANEntryA VLAN Object entry. CcVLANEntry .1.3.6.1.4.1.388.6.3.26.1 |
ccVLANIndexThe index for this VLAN object.ro INTEGER .1.3.6.1.4.1.388.6.3.26.1.1 |
ccVLANNameThe Name of the VLAN.ro DisplayString .1.3.6.1.4.1.388.6.3.26.1.2 |
ccVLANDescA description of the VLAN. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be part
of description ',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.26.1.3 |
ccVLANVidAn id for this VLAN.ro INTEGER .1.3.6.1.4.1.388.6.3.26.1.4 |
ccVLANPriorityThe priority for this VLAN.
The valid values for priority for VLAN is
between 0-7.rw INTEGER .1.3.6.1.4.1.388.6.3.26.1.5 |
ccVLANPortsThe ports for this VLAN. 1 means etherport1, 2 means etherport2 and 0 means both etherports.rw INTEGER .1.3.6.1.4.1.388.6.3.26.1.6 |
ccVLANEtherPolicyThe parent etherpolicy of this VLAN.ro DisplayString .1.3.6.1.4.1.388.6.3.26.1.7 |
ccVLANWlanThe number of WLANs attached to this VLAN object.ro INTEGER .1.3.6.1.4.1.388.6.3.26.1.8 |
ccVLANWlanListA list of WLANs attatched to this VLAN.ro DisplayString .1.3.6.1.4.1.388.6.3.26.1.9 |
ccVLANAddWlanAdd a WLAN object into this VLAN.rw DisplayString .1.3.6.1.4.1.388.6.3.26.1.10 |
ccVLANRemWlanRemove a VLAN object from the VLAN.rw DisplayString .1.3.6.1.4.1.388.6.3.26.1.11 |
ccSecurityTableA table of Security entries. SEQUENCE OF CcSecurityEntry .1.3.6.1.4.1.388.6.3.28 |
ccSecurityEntryA Security Object entry. CcSecurityEntry .1.3.6.1.4.1.388.6.3.28.1 |
ccSecIndexThe index for this security object.ro INTEGER .1.3.6.1.4.1.388.6.3.28.1.1 |
ccSecNameThe name of the security policy. The Maximum length of the Policy Name
can be 50 characters. Note that the following characters cannot be part
of Policy Name field - ',.,\,&,# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.2 |
ccSecDescThe description of this security policy. The Maximum length of the description
can be 128 characters. Note that the following characters cannot be part
of description ',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.3 |
ccSecBeaconEssidEnable/Disable the beacon Essid for this security policy. The default is TRUE.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.4 |
ccSecPreSharedAuthEnabledEnable(true)/Disable(false) pre-shared WEP keys
and/or WPA-PSK. Note that enabling this automatically disables
Open Encryptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.5 |
ccSecWEPEnabledEnable(true)/Disable(false) WEP.
Note that enabling this automatically disables Open Encryptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.6 |
ccSecWEPKeyBitSizeWEP Key size in bits - 40 or 104.
Note that if you are planning to use Kerberos
as the authentication mechanism, you cannot choose the
WEP key size as 40 bits, because Kerberos authentication
results in 104 bit keys.
Also note that TKIP cannot be used along with 40 bit WEP encryption.
If TKIP has to be used along with WEP, the WEP key size must be
104 bits.
Further, if Keyguard has to be used along with WEP, then also
the WEP key size must be 104 bits.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.7 |
ccSecWEPKeyThis value is used to derive an encryption key which could be 40 bit or 128 bit in size. It will be needed if Shared Key
is enabled and encryption type is WEP40 or WEP128. Here's how to enter the values:
If you want to input the keys yourself, the format is <<number,key>>, where number could be anyone of
0,1,2, or 3, depending on which key you want to input. If the WEP key bit size is 40, the valid keylength
is 10 characters, and if the WEP key bit size is 104, the valid keylength is 26 characters.
If you want the Switch to generate and set all the keys for you,the format is <<'switchgenerate',string>>.
The string length should be between 4 and 32.
'switchgenerate' is a keyword here, and should be entered as such (without the single quote).
As a further option, you could enter an ASCII string and the agent would convert the ASCII to a hex key.
The format for entering this string is <<'agentgenerate',number,string>>. 'agentgenerate' is a keyword here.
number is anyone of 0,1,2 or 3 depending on which WEP Key you want to set.
The string length should be 5 characters if the hex key has to be 40 bit, and 13 characters if the hex
key has to be 104 bit.
Note that for all the three formats listed above, '<<' and '>>' are grammar delimiter and are not a part
of the input.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.8 |
ccSecWEPKeyUseValue of 0 to 3.
ex. 0
1
2
3rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.9 |
ccSecKerberosEnabledEnable(1)/Disable(2) Kerberos Authentication.
Note that if you choose WEP as the encryption algorithm,
you cannot choose the WEP key size to be 40 bits, since Kerberos
authentication results in 104 bit WEP keys.
Also note that TKIP as the encryption algorithm is currently not supported
with Kerberos authentication.
Enabling this automatically disables
Open Encryptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.10 |
ccSecKerberosRealmA Kerberos Realm Name. Needed if Kerberos enabled.
ex. APFW.SYMBOL.COM.
Note that the following characters are not allowed for realm:
` @ # $ & ( ) = | \ ; double-quote ' < > / sprw DisplayString .1.3.6.1.4.1.388.6.3.28.1.11 |
ccSecKerberosServer11st Kerberos server name or dotted-decimal IP address.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.12 |
ccSecKerberosServer22nd Kerberos server name or dotted-decimal IP address.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.13 |
ccSecKerberosServer33rd Kerberos server name or dotted-decimal IP address.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.14 |
ccSecKerberosPort11st Kerberos Server port numberrw INTEGER .1.3.6.1.4.1.388.6.3.28.1.15 |
ccSecKerberosPort22nd Kerberos Server port numberrw INTEGER .1.3.6.1.4.1.388.6.3.28.1.16 |
ccSecKerberosPort33rd Kerberos Server port numberrw INTEGER .1.3.6.1.4.1.388.6.3.28.1.17 |
ccSecRadiusServer11st RADIUS Server Name/IP or dotted-decimal IP address.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.18 |
ccSecRadiusPort11st RADIUS Server port numberrw INTEGER .1.3.6.1.4.1.388.6.3.28.1.19 |
ccSecRadiusSecret11st RADIUS server shared secret.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.20 |
ccSecRadiusServer22nd RADIUS Server Name/IP or dotted-decimal IP address.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.21 |
ccSecRadiusPort22nd RADIUS Server port numberrw INTEGER .1.3.6.1.4.1.388.6.3.28.1.22 |
ccSecRadiusSecret22nd RADIUS server shared secret.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.23 |
ccSecRadiusHostnameHostname to use with RADIUS server.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.24 |
ccSecEapEnabledEnable(1)/Disable(2) EAP Authentication.
Note that enabling this automatically disables
Open Encryptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.25 |
ccSecEapQuietPeriodEAP quiet period in seconds. Valid values lie
between 1 and 99.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.26 |
ccSecEapTxPeriodEAP transmit period in seconds.
Valid values are from 1 to 99 secondsrw INTEGER .1.3.6.1.4.1.388.6.3.28.1.27 |
ccSecEapReauthEnable(1)/Disable(2) forced EAP Re-Authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.28 |
ccSecEapReauthPeriodEAP Reauthentication period in seconds.
Valid values are any value between 30
and 65535.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.29 |
ccSecEapReauthMaxRetriesMax retries for EAP re-authentication.
Valid values are from 1 to 99.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.30 |
ccSecEapSupplTimeoutEAP supplicant timeout in seconds.
Valid values are from 1 to 99 seconds.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.31 |
ccSecEapMaxreqRetriesMaximum retries for EAP requests.
Valid values are from 1 to 10.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.32 |
ccSecGroupRekeyPeriodGroup key update period in seconds.
Valid values are from 30 to 65535 seconds.rw INTEGER .1.3.6.1.4.1.388.6.3.28.1.33 |
ccSecPreSharedKeyMaterialPreshared Key data, either 8-63 ASCII characters
or 64 hex characters.rw DisplayString .1.3.6.1.4.1.388.6.3.28.1.34 |
ccSecOpenEncryptEnabledEnable(true)/Disable(false) open encryption.
Note that enabling open encryption also enables
open authentication.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.35 |
ccSecKeyGuardEnabledEnable(true)/Disable(false) KeyGuard encryption.
Note that Keyguard doesn't work along with WEP encryption,
if the WEP Key size is 40 bits. The WEP key size must be 104
bits for Keyguard to work along with it.
Also note that enabling this automatically disables
Open Encryptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.36 |
ccSecTKIPEnabledEnable(true)/Disable(false) TKIP encryption.
Note that in the current implementation, TKIP cannot
co-exist with Kerberos.
Also note that TKIP cannot co-exist with WEP key encryption,
if the WEP key size is 40 bits. The WEP key size must be 104
bits for it to work with TKIP.
Note that enabling this automatically disables
Open Encryptionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.37 |
ccSecBCMCEncrTypeThe encryption type of broadcast/multicast.rodeprecated EncrType .1.3.6.1.4.1.388.6.3.28.1.38 |
ccSecCheckValidityThis OID can be used to find out
whether this security policy is valid or not.
If it is valid, an OK is returned in the response.
If not, you get a description as to what the error is.
Please note that unless the security policy is valid,
it cannot be used anywhere, i.e it cannot be applied to a
WLAN.ro DisplayString .1.3.6.1.4.1.388.6.3.28.1.39 |
ccSecCCMPEnabledEnable(true)/Disable(false)AES CCMP encryption.
This OID is read-only for Default security policy.
For all other instances, it is read-write.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.40 |
ccSecPreAuthenticationEnable(true)/Disable(false)Pre-Authentication.
This OID is read-only for 'Default' instance.(ie 'Default' Security policy)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.41 |
ccSecPMKCachingEnable(true)/Disable(false)Opportunistic PMK Caching.
This OID is read-only for 'Default' instance.(ie 'Default' security policy)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.42 |
ccSecVPNEnabledEnable(true)/Disable(false) VPN Authentication.
This OID is read-only for 'Default' instance.
(ie 'Default' security policy).This OID can be
enabled for only one security policy(ie only one
instance).
Note: If you need to enable this oid for a particular
security policy, make sure it is disabled for all
other security policies.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.28.1.43 |
ccACLTableA table for ACL entries. SEQUENCE OF CcACLEntry .1.3.6.1.4.1.388.6.3.29 |
ccACLEntryAn ACL object entry. CcACLEntry .1.3.6.1.4.1.388.6.3.29.1 |
ccACLIndexThe index of this ACL object. INTEGER .1.3.6.1.4.1.388.6.3.29.1.1 |
ccACLNameThe name of the ACL. The Maximum length of the ACL Name can be 50
characters. Note that the following characters cannot be part of ACL
Name field - ',.,\,&,# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.29.1.2 |
ccACLDefaultActionThe default action for this ACL.
Is either 'allow' or 'deny'.rw DisplayString .1.3.6.1.4.1.388.6.3.29.1.3 |
ccACLActionSET only.
Setting a new action for an already existing MAC address.
Syntax is
< allow/deny>,<new-MAC Address>,<old start MAC Address>
or
<allow/deny>,<new start MAC Address>-<new end MAC Address>,<old start MAC Address>.rw DisplayString .1.3.6.1.4.1.388.6.3.29.1.4 |
ccACLGetItemCountThe number of items in the ACL.ro INTEGER .1.3.6.1.4.1.388.6.3.29.1.5 |
ccACLGetItemShow the one item in the ACL list. Here's the format in which
the reply is received: < MAC Addr,allow/deny >.rodeprecated DisplayString .1.3.6.1.4.1.388.6.3.29.1.6 |
ccACLAddItemSET only.
Adding a new rule into the list.
Rules have to be added in the format <allow/deny,single MAC address>
Or <allow/deny,Start MAC,End MAC>. The former is to be used for configuring
access for a single MAC address, while the latter configures a range of
MAC addresses.
Note: AddItem with 0 or 1.0 or x.0 is invalid index number.
The index number has to be great than 0.rw DisplayString .1.3.6.1.4.1.388.6.3.29.1.7 |
ccACLRemItemSET only.
Removing a rule from the ACL.
You need to give only the MAC address to remove the rule
from the ACL. For rules which involve more than one
MAC Addresses, just give the starting MAC Address.rw DisplayString .1.3.6.1.4.1.388.6.3.29.1.8 |
ccNPolicyMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.30 |
ccNumNPRecThe total number of NP records in the NP table.ro INTEGER .1.3.6.1.4.1.388.6.3.30.1 |
ccNumPORecThe total number of Policy Objects in the Policy table.ro INTEGER .1.3.6.1.4.1.388.6.3.30.2 |
ccNumCGRecThe total number of Classification Groups in the CG table.ro INTEGER .1.3.6.1.4.1.388.6.3.30.3 |
ccNumCFRecThe total number of Classifiers in the CF table.ro INTEGER .1.3.6.1.4.1.388.6.3.30.4 |
ccCFAddObjAdd one new Classifier object into the table.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.5 |
ccCFRemObjRemove one Classifier object from the table.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.6 |
ccCGAddObjAdd one Classification Group Object into the ccCGTable.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.7 |
ccCGRemObjRemove one Classification Group Object from the ccCGTable.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.8 |
ccPOAddObjAdd one Policy Object into the ccPOTable.
The 'type' of the Policy Object needs to be specified
while adding. Here's the syntax:
<PolicyObjectName, Type>. Type is an integer to be chosen according to
the list below:
1) 5 - Outbound AccessPort
2) 6 - Inbound AccessPort
3) 9 - Outbound NIC
4) 10 - Inbound NIC
5) 17 - Outbound Bluetooth
6) 18 - Inbound Bluetooth
Only the first two are supported in the current version of the
Wireless Switch. Attempts to set other types of Policy Objects will
result in an error.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.9 |
ccPORemObjRemove one Policy Object from the ccPOTable.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.10 |
ccNPAddObjAdd one network policy object into the ccNPTable.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.11 |
ccNPRemObjRemove one network policy object from the ccNPTable.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.12 |
ccNPTableA list of Network Policy entries. SEQUENCE OF CcNPEntry .1.3.6.1.4.1.388.6.3.30.13 |
ccNPEntryA Network policy table entry. CcNPEntry .1.3.6.1.4.1.388.6.3.30.13.1 |
ccNPIndexA Network policy index.ro INTEGER .1.3.6.1.4.1.388.6.3.30.13.1.1 |
ccNPNameThe network policy name.
The Maximum length of the input string can be 50 characters.
Note that the following characters cannot be part of the input string-
',.,\,&, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.13.1.2 |
ccNPDescThe description of the network policy name.
The Maximum length of the description can be 128 characters.
Note that the following characters cannot be part of the input string-
',# and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.13.1.3 |
ccNPInNameThe Input network policy name.The Maximum length of the input string can be 50 characters.
Note that the following characters cannot be part of the input string-
',.,\,&, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.13.1.4 |
ccNPOutNameThe Output network policy name.The Maximum length of the input string can be 50 characters.
Note that the following characters cannot be part of the input string-
',.,\,&, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.13.1.5 |
ccPOTableA list of Policy Object entries. SEQUENCE OF CcPOEntry .1.3.6.1.4.1.388.6.3.30.14 |
ccPOEntryA policy table entry. CcPOEntry .1.3.6.1.4.1.388.6.3.30.14.1 |
ccPOIndexA Network policy index. INTEGER .1.3.6.1.4.1.388.6.3.30.14.1.1 |
ccPONameThe network policy name.
The Maximum length of the input string can be 50 characters.
Note that the following characters cannot be part of the input string-
',.,\,&, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.14.1.2 |
ccPODescA description of the network policy.
The Maximum length of the description can be 128 characters.
Note that the following characters cannot be part of the input string-
',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.14.1.3 |
ccPOCgCountThe count of CGs in the Policy object.ro INTEGER .1.3.6.1.4.1.388.6.3.30.14.1.4 |
ccPOAddCgAdd a classification group to the policy.rw DisplayString .1.3.6.1.4.1.388.6.3.30.14.1.11 |
ccPORemCgRemove a classification group from the policy.rw DisplayString .1.3.6.1.4.1.388.6.3.30.14.1.12 |
ccPOTypeThe type of the Policy Object. The returned value denotes one of the following:
1) 5 - Outbound AccessPort
2) 6 - Inbound AccessPort
3) 9 - Outbound NIC
4) 10 - Inbound NIC
5) 17 - Outbound Bluetooth
6) 18 - Inbound Bluetooth
Only the first two are supported in the current version of the
Wireless Switch.ro INTEGER .1.3.6.1.4.1.388.6.3.30.14.1.13 |
ccPOPacketModifierDenotes which of 'TOS','Priority', and 'IP-Redirect' are
being used for modifying the packets.rodeprecated DisplayString .1.3.6.1.4.1.388.6.3.30.14.1.14 |
ccCGTableA table of Classification Group entries. SEQUENCE OF CcCGEntry .1.3.6.1.4.1.388.6.3.30.15 |
ccCGEntryA network classificaton group table entry. CcCGEntry .1.3.6.1.4.1.388.6.3.30.15.1 |
ccCGIndexThe index for the traffic classification group entry. INTEGER .1.3.6.1.4.1.388.6.3.30.15.1.1 |
ccCGNameA Classification Group name.
The Maximum length of the input string can be 50 characters.
Note that the following characters cannot be part of the input string-
',.,\,&, # and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.15.1.2 |
ccCGDescA description of the CG.
The Maximum length of the description can be 128 characters.
Note that the following characters cannot be part of description -
',# and double quotesrw DisplayString .1.3.6.1.4.1.388.6.3.30.15.1.3 |
ccCGCfCountThe number of Classifier included in the Classification Group.ro INTEGER .1.3.6.1.4.1.388.6.3.30.15.1.4 |
ccCGAddCfAdd a new classifier to the classification group.rw DisplayString .1.3.6.1.4.1.388.6.3.30.15.1.7 |
ccCGRemCfRemove a classifier from the classification group.rw DisplayString .1.3.6.1.4.1.388.6.3.30.15.1.8 |
ccCFTableA table of Classifier entries. SEQUENCE OF CcCFEntry .1.3.6.1.4.1.388.6.3.30.16 |
ccCFEntryA network traffic classifier table entry. CcCFEntry .1.3.6.1.4.1.388.6.3.30.16.1 |
ccCFIndexThe index of Network Traffic classifier. INTEGER .1.3.6.1.4.1.388.6.3.30.16.1.1 |
ccCFNameThe name of the classifier.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.16.1.2 |
ccCFDescThe description of a classifier entry.
The maximum number of characters allowed is 128, and the following
characters cannot be part of the input string -
',# and double quotes.rw DisplayString .1.3.6.1.4.1.388.6.3.30.16.1.3 |
ccCFMcCountThe number of Matching Criterion for the classifier.ro INTEGER .1.3.6.1.4.1.388.6.3.30.16.1.4 |
ccCFAddMcAdd one Matching Criteria to the Classifier.
Choose from the following list of offsets:
srcMacAddr(0),
desMacAddr(1),
etherType(2),
vlanID(3),
userPriority(4),
protocol(5),
tos(6),
srcIPAddr(7),
desIPAddr(8),
srcPort(9),
desPort(10),
multicastMask(11)
Note:
This object is SET-only.rw MCValueOffset .1.3.6.1.4.1.388.6.3.30.16.1.10 |
ccCFRemMcRemove one Matching Criteria from the Classifier.
Choose from the following list of offsets:
srcMacAddr(0),
desMacAddr(1),
etherType(2),
vlanID(3),
userPriority(4),
protocol(5),
tos(6),
srcIPAddr(7),
desIPAddr(8),
srcPort(9),
desPort(10),
multicastMask(11)
Note:
This object is SET-only.rw MCValueOffset .1.3.6.1.4.1.388.6.3.30.16.1.11 |
ccPOObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.30.17 |
ccPOCGTableA list of per Policy Object, per Classificatin Group entries. SEQUENCE OF CcPOCGEntry .1.3.6.1.4.1.388.6.3.30.17.2 |
ccPOCGEntryAn entry of Policy Objects, per Classification Group. CcPOCGEntry .1.3.6.1.4.1.388.6.3.30.17.2.1 |
ccPOCGIndexThe index of this Classification Group, per Policy Object INTEGER .1.3.6.1.4.1.388.6.3.30.17.2.1.1 |
ccPOCGNameThe classification group name which belong to the policy object.ro DisplayString .1.3.6.1.4.1.388.6.3.30.17.2.1.2 |
ccPOCGNewIPThe new IP address used by the CG in the Policy Object
for IP-Redirect. Valid only for Input Policy Objects.
For disabling the use of IP-Redirect,use the string
'disable' as input for this OID.Any valid IP address as
the input automatically enables its usage.rw DisplayString .1.3.6.1.4.1.388.6.3.30.17.2.1.3 |
ccPOCGVlanPriorityThe priority of the VLAN in the CG governed by the Policy Object.
0 to 7 only. Valid only for Input Policy Objects (Trying to
SET for an Output Policy results in an error).
For disabling the use of Vlan Priority, use the string 'disable'.
Any value from 0 through 7 automatically enables its usage.rw DisplayString .1.3.6.1.4.1.388.6.3.30.17.2.1.4 |
ccPOCGTosThe Type of Service in the Policy Object.
This is specific to the enterprise in which
the Wireless Switch is deployed.The user has to input
a bit pattern of six bits.Valid for both Input and Output
Policies.For disabling the TOS, use 'disable' as the
input for this OID. Any valid 6-bit sequence automatically
enables its usage.rw DisplayString .1.3.6.1.4.1.388.6.3.30.17.2.1.5 |
ccPOCGBwThe Bandwidth in the CG of the Policy Object.
Valid only for Output Policy (Trying to
SET for an Input Policy results in an error). A '-1' in the reply
implies that the policy being queried was an Input Policy.rw INTEGER .1.3.6.1.4.1.388.6.3.30.17.2.1.6 |
ccPOCGTxProfileThe TxProfile of the Policy Object.
This controls how the AccessPort treats
a packet. Valid only for an Output policy (Trying to
SET for an Input Policy results in an error).
Values are 0 & 2.
0 is Data
2 is Voice
-1 in reply implies that the policy being queried was an Input Policy.rw INTEGER .1.3.6.1.4.1.388.6.3.30.17.2.1.7 |
ccPOCGPacketModifierDenotes which of 'TOS','Priority', and 'IP-Redirect' are
being used for modifying the packets.ro DisplayString .1.3.6.1.4.1.388.6.3.30.17.2.1.8 |
ccCGObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.30.18 |
ccCGCFTableA table of Classier Entries, per Classification Group. SEQUENCE OF CcCGCFEntry .1.3.6.1.4.1.388.6.3.30.18.2 |
ccCGCFEntryA Classifier entry, per Classification Group CcCGCFEntry .1.3.6.1.4.1.388.6.3.30.18.2.1 |
ccCGCFIndexThe index of this classifier, per Classification Group INTEGER .1.3.6.1.4.1.388.6.3.30.18.2.1.1 |
ccCGCFActionIndicates the allow/deny action for this Classifier belonging to this Classification Group.rw DisplayString .1.3.6.1.4.1.388.6.3.30.18.2.1.2 |
ccCGCFNameThe name of the classifier in this CG.ro DisplayString .1.3.6.1.4.1.388.6.3.30.18.2.1.3 |
ccCFObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.30.19 |
ccCFMcTableA table of Matching Criteria per Classifier. SEQUENCE OF CcCFMcEntry .1.3.6.1.4.1.388.6.3.30.19.2 |
ccCFMcEntryA Matching Criteria table entry (per Classifier). CcCFMcEntry .1.3.6.1.4.1.388.6.3.30.19.2.1 |
ccCFMCIndexThe index of this Matching Criteria INTEGER .1.3.6.1.4.1.388.6.3.30.19.2.1.1 |
ccCFMCOffsetThe offset of the Matching Criterion.
The offsets are:
srcMacAddr(0),
desMacAddr(1),
etherType(2),
vlanID(3),
userPriority(4),
protocol(5),
tos(6),
srcIPAddr(7),
desIPAddr(8),
srcPort(9),
desPort(10),
multicastMask(11)
A '-1' in the reply indicates no offset available.ro MCValueOffset .1.3.6.1.4.1.388.6.3.30.19.2.1.2 |
ccCFMCValueCountThe number of values in this Matching Criterion.ro INTEGER .1.3.6.1.4.1.388.6.3.30.19.2.1.3 |
ccCFAddMCValueAdd one value to the Matching Criteria.
For Source and Destination IP,
Use syntax : <IPAddress:Net Mask>.
<IPAddress-IPAddress>.
<IPAddress>/<CIDR bits>.
For Protocol, choose the number from the list:
Protocol
Number Keyword Protocol References
-
0 HOPOPT IPv6 Hop-by-Hop Option [RFC1883]
1 ICMP Internet Control Message [RFC792]
2 IGMP Internet Group Management [RFC1112]
3 GGP Gateway-to-Gateway [RFC823]
4 IP IP in IP (encapsulation) [RFC2003]
5 ST Stream [RFC1190,RFC1819]
6 TCP Transmission Control [RFC793]
7 CBT CBT [Ballardie]
8 EGP Exterior Gateway Protocol [RFC888,DLM1]
9 IGP any private interior gateway [IANA]
(used by Cisco for their IGRP)
10 BBN-RCC-MON BBN RCC Monitoring [SGC]
11 NVP-II Network Voice Protocol [RFC741,SC3]
12 PUP PUP [PUP,XEROX]
13 ARGUS ARGUS [RWS4]
14 EMCON EMCON [BN7]
15 XNET Cross Net Debugger [IEN158,JFH2]
16 CHAOS Chaos [NC3]
17 UDP User Datagram [RFC768,JBP]
18 MUX Multiplexing [IEN90,JBP]
19 DCN-MEAS DCN Measurement Subsystems [DLM1]
20 HMP Host Monitoring [RFC869,RH6]
21 PRM Packet Radio Measurement [ZSU]
22 XNS-IDP XEROX NS IDP [ETHERNET,XEROX]
23 TRUNK-1 Trunk-1 [BWB6]
24 TRUNK-2 Trunk-2 [BWB6]
25 LEAF-1 Leaf-1 [BWB6]
26 LEAF-2 Leaf-2 [BWB6]
27 RDP Reliable Data Protocol [RFC908,RH6]
28 IRTP Internet Reliable Transaction [RFC938,TXM]
29 ISO-TP4 ISO Transport Protocol Class 4 [RFC905,RC77]
30 NETBLT Bulk Data Transfer Protocol [RFC969,DDC1]
31 MFE-NSP MFE Network Services Protocol [MFENET,BCH2]
32 MERIT-INP MERIT Internodal Protocol [HWB]
33 SEP Sequential Exchange Protocol [JC120]
34 3PC Third Party Connect Protocol [SAF3]
35 IDPR Inter-Domain Policy Routing Protocol [MXS1]
36 XTP XTP [GXC]
37 DDP Datagram Delivery Protocol [WXC]
38 IDPR-CMTP IDPR Control Message Transport Proto [MXS1]
39 TP++ TP++ Transport Protocol [DXF]
40 IL IL Transport Protocol [Presotto]
41 IPv6 Ipv6 [Deering]
42 SDRP Source Demand Routing Protocol [DXE1]
43 IPv6-Route Routing Header for IPv6 [Deering]
44 IPv6-Frag Fragment Header for IPv6 [Deering]
45 IDRP Inter-Domain Routing Protocol [Sue Hares]
46 RSVP Reservation Protocol [Bob Braden]
47 GRE General Routing Encapsulation [Tony Li]
48 MHRP Mobile Host Routing Protocol[David Johnson]
49 BNA BNA [Gary Salamon]
50 ESP Encapsulating Security Payload [RFC1827]
51 AH Authentication Header [RFC1826]
52 I-NLSP Integrated Net Layer Security TUBA [GLENN]
53 SWIPE IP with Encryption [JI6]
54 NARP NBMA Address Resolution Protocol [RFC1735]
55 MOBILE IP Mobility [Perkins]
56 TLSP Transport Layer Security Protocol [Oberg]
using Kryptonet key management
57 SKIP SKIP [Markson]
58 IPv6-ICMP ICMP for IPv6 [RFC1883]
59 IPv6-NoNxt No Next Header for IPv6 [RFC1883]
60 IPv6-Opts Destination Options for IPv6 [RFC1883]
61 any host internal protocol [IANA]
62 CFTP CFTP [CFTP,HCF2]
63 any local network [IANA]
64 SAT-EXPAK SATNET and Backroom EXPAK [SHB]
65 KRYPTOLAN Kryptolan [PXL1]
66 RVD MIT Remote Virtual Disk Protocol [MBG]
67 IPPC Internet Pluribus Packet Core [SHB]
68 any distributed file system [IANA]
69 SAT-MON SATNET Monitoring [SHB]
70 VISA VISA Protocol [GXT1]
71 IPCV Internet Packet Core Utility [SHB]
72 CPNX Computer Protocol Network Executive [DXM2]
73 CPHB Computer Protocol Heart Beat [DXM2]
74 WSN Wang Span Network [VXD]
75 PVP Packet Video Protocol [SC3]
76 BR-SAT-MON Backroom SATNET Monitoring [SHB]
77 SUN-ND SUN ND PROTOCOL-Temporary [WM3]
78 WB-MON WIDEBAND Monitoring [SHB]
79 WB-EXPAK WIDEBAND EXPAK [SHB]
80 ISO-IP ISO Internet Protocol [MTR]
81 VMTP VMTP [DRC3]
82 SECURE-VMTP SECURE-VMTP [DRC3]
83 VINES VINES [BXH]
84 TTP TTP [JXS]
85 NSFNET-IGP NSFNET-IGP [HWB]
86 DGP Dissimilar Gateway Protocol [DGP,ML109]
87 TCF TCF [GAL5]
88 EIGRP EIGRP [CISCO,GXS]
89 OSPFIGP OSPFIGP [RFC1583,JTM4]
90 Sprite-RPC Sprite RPC Protocol [SPRITE,BXW]
91 LARP Locus Address Resolution Protocol [BXH]
92 MTP Multicast Transport Protocol [SXA]
93 AX.25 AX.25 Frames [BK29]
94 IPIP IP-within-IP Encapsulation Protocol [JI6]
95 MICP Mobile Internetworking Control Pro. [JI6]
96 SCC-SP Semaphore Communications Sec. Pro. [HXH]
97 ETHERIP Ethernet-within-IP Encapsulation [RDH1]
98 ENCAP Encapsulation Header [RFC1241,RXB3]
99 any private encryption scheme [IANA]
100 GMTP GMTP [RXB5]
101 IFMP Ipsilon Flow Management Protocol [Hinden]
102 PNNI PNNI over IP [Callon]
103 PIM Protocol Independent Multicast [Farinacci]
104 ARIS ARIS [Feldman]
105 SCPS SCPS [Durst]
106 QNX QNX [Hunter]
107 A/N Active Networks [Braden]
108 IPComp IP Payload Compression Protocol [RFC2393]
109 SNP Sitara Networks Protocol [Sridhar]
110 Compaq-Peer Compaq Peer Protocol [Volpe]
111 IPX-in-IP IPX in IP [Lee]
112 VRRP Virtual Router Redundancy Protocol [Hinden]
113 PGM PGM Reliable Transport Protocol [Speakman]
114 any 0-hop protocol [IANA]
115 L2TP Layer Two Tunneling Protocol [Aboba]
116 DDX D-II Data Exchange (DDX) [Worley]
117 IATP Interactive Agent Transfer Protocol [Murphy]
118 STP Schedule Transfer Protocol [JMP]
119 SRP SpectraLink Radio Protocol [Hamilton]
120 UTI UTI [Lothberg]
121 SMP Simple Message Protocol [Ekblad]
122 SM SM [Crowcroft]
123 PTP Performance Transparency Protocol [Welzl]
124 ISIS over IPv4 [Przygienda]
125 FIRE [Partridge]
126 CRTP Combat Radio Transport Protocol [Sautter]
127 CRUDP Combat Radio User Datagram [Sautter]
128 SSCOPMCE [Waber]
129 IPLT [Hollbach]
130 SPS Secure Packet Shield [McIntosh]
131 PIPE Private IP Encapsulation within IP [Petri]
132 SCTP Stream Control Transmission Protocol [Stewart]
133 FC Fibre Channel [Rajagopal]
134 RSVP-E2E-IGNORE [RFC3175]
135-254 Unassigned [IANA]
255 Reserved [IANA]
This is Write onlyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.30.19.2.1.4 |
ccCFRemMCValueRemove one value from the Matching Criteria.
The maximum number of characters allowed is 50, and the following
characters cannot be part of the input string -
',.,\,&, # and double quotes.
This is Write-only.rw DisplayString .1.3.6.1.4.1.388.6.3.30.19.2.1.5 |
ccCFMcValTableA table of the values per Matching Criterion. SEQUENCE OF CcCFMcValEntry .1.3.6.1.4.1.388.6.3.30.19.3 |
ccCFMcValEntryAn entry of Matching Criteria values (per Classifier, per Matching Criteria). CcCFMcValEntry .1.3.6.1.4.1.388.6.3.30.19.3.1 |
ccCFMcValIndexThe index of this value in the Matching Criteria. INTEGER .1.3.6.1.4.1.388.6.3.30.19.3.1.1 |
ccCFMCValueThe value of the Matching Criterion.
For Source and Destination IP,
the returned value is of the format:
<IPAddress:Net Mask>
<IPAddress-IPAddress>
<IPAddress>/<CIDR bits>ro DisplayString .1.3.6.1.4.1.388.6.3.30.19.3.1.2 |
ccHSBConfigure OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.31 |
ccHsbEnabledSetting ccHsbEnabled to <true(1)> enables the Standby Management feature,
Setting ccHsbEnabled to <false(2)> disables the Standby Management feature
Mower: default value is FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.31.1 |
ccHsbModeStandby Mode of the wireless switch, Primary or Standbyrw DisplayString .1.3.6.1.4.1.388.6.3.31.2 |
ccHsbMacAddress1MAC address for establishing the heartbeat
When the MAC address is set to 00:00:00:00:00:00
it sets the option to Auto discovery Enabled
Note:Disable ccHsbEnabled first to set this OIDrw DisplayString .1.3.6.1.4.1.388.6.3.31.3 |
ccHsbMacAddress2Second Mac address for establishing the heartbeat
When the MAC address is set to 00:00:00:00:00:00
it sets the option to Auto discovery Enabled
Note:Disable ccHsbEnabled first to set this OIDrw DisplayString .1.3.6.1.4.1.388.6.3.31.4 |
ccHsbHeartbeatEnabledOnInterface1Setting to <true(1)> enables the heartbeat on interface 1,
Setting to <false(2)> enables the heartbeat on interface 1
Mower: default value is TRUE.
Note:Disable ccHsbEnabled first to set this OIDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.31.5 |
ccHsbHeartbeatEnabledOnInterface2Setting to <true(1)> enables the heartbeat on interface 2,
Setting to <false(2)> enables the heartbeat on interface 2
Mower: default value is FALSE.
Note:Disable ccHsbEnabled first to set this OIDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.31.6 |
ccHsbConnectivityFlagTells the user if connectivity (heartbeat) between the Primary and
Standby is established
Mower: default value is FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.31.7 |
ccHsbFailoverStateThis is the state of the Wireless switch. Here are the states
1: Startup
2: Find Standby
3: Waiting for Connectivity
4: Connected
5: Halted
6: Monitoring
7: Acting as Primary
8: Trying to Reconnect
9: Re-Connected
10: Auto-Revertingro HsbState .1.3.6.1.4.1.388.6.3.31.8 |
ccHsbFailoverReasonThis parameter tells the reason for failover.ro DisplayString .1.3.6.1.4.1.388.6.3.31.9 |
ccHsbResetCodeThis is a number set by the Wireless switch when it reboots.ro INTEGER .1.3.6.1.4.1.388.6.3.31.10 |
ccHsbRevertThis is a Boolean variable. When the manager sets this variable to true
the standby-active will revert to standby and disabled-primary will revert
to primary. Reading this value results in a -1 being returned.
Mower: default value is FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.31.11 |
ccHsbautorevertState of the Auto Revert Function (Enabled/Disabled)
Note:Disable ccHsbEnabled first to set this OIDrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.31.12 |
ccHsbautorevertdelayNumber of Minutes to delay after re-connecting before autoreverting
Note:Disable ccHsbEnabled first to set this OIDrw INTEGER .1.3.6.1.4.1.388.6.3.31.13 |
ccMUInfoTableA table for MU Information entries. SEQUENCE OF CcMUInfoEntry .1.3.6.1.4.1.388.6.3.32 |
ccMUInfoEntryAn MU information object entry. CcMUInfoEntry .1.3.6.1.4.1.388.6.3.32.1 |
ccMUInfoIndexThe index of MU Information Table.ro Integer32 .1.3.6.1.4.1.388.6.3.32.1.1 |
ccMUInfoTypeIndicates the device type of this Mobile Unit.
0 = Data
1 = Voice
2 = Wireless AP.ro MUDeviceType .1.3.6.1.4.1.388.6.3.32.1.2 |
ccMUInfoMacMAC address for this MU.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.3 |
ccMUInfoIPIP address for this MU.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.4 |
ccMUInfoWlanWLAN name that the MU is on currently.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.5 |
ccMUInfoEssidESSID currently selected by this MU.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.6 |
ccMUInfoAPDisplays the AP name this MU is associated with.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.32.1.7 |
ccMUInfoAPStateIndicates the association status of the AccessPort.
Association Status:
0 = Away
1 = Associatedro APStatus .1.3.6.1.4.1.388.6.3.32.1.8 |
ccMUInfoSecStateThe security status for this MU.
0 = No Encryption
1 = WEP (per MU Key)
2 = WEP (Shared Key)
3 = TKIP (Per MU Key)
4 = TKIP (Shared Key)ro MUSecurityStatus .1.3.6.1.4.1.388.6.3.32.1.9 |
ccMUInfoCurRateIndicates the current communication rate on the MU.
0 = 1 Mbps
1 = 2 Mbps
2 = 5.5 Mbps
3 = 6 Mbps
4 = 9 Mbps
5 = 11 Mbps
6 = 12 Mbps
7 = 18 Mbps
8 = 22 Mbps
9 = 24 Mbps
10 = 36 Mbps
11 = 48 Mbps
12 = 54 Mbpsro CurrentRate .1.3.6.1.4.1.388.6.3.32.1.10 |
ccMUInfoSupRatesIndicates the current supported rates.
This object meaning can be explained as the following:
1_Mbps(1)
2_Mbps(2)
1_2_Mbps(3)
5.5_Mbps(4)
1_5.5_Mbps(5)
2_5.5_Mbps(6)
1_2_5.5_Mbps(7)
11_Mbps(8)
1_11_Mbps(9)
2_11_Mbps(10)
1_2_11_Mbps(11)
5.5_11_Mbps(12)
1_5.5_11_Mbps(13)
2_5.5_11_Mbps(14)
1_2_5.5_11_Mbps(15)ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.11 |
ccMUInfoRssiReceive signal strength indicator (RSSI) of this MU.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.12 |
ccMUInfoPspIndicates the current power mode setting on this MU.
In PSP mode the radio receiver is configured to conserve battery life.
0 = Continuous Access Mode (CAM) mode
1 = Power Save Polling Mode(PSP) modero PSPowerMode .1.3.6.1.4.1.388.6.3.32.1.13 |
ccMUInfoIntfThe interface type displayed on the associated AP GUI.
Like: 'RF'.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.14 |
ccMUInfoAsscUptimeThe number of seconds since the MU last associated.
Value is zero if the MU is not associated and was
aged-out.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.15 |
ccMUInfoTktExpThe number of seconds before the security ticket expiration.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.16 |
ccMUInfoUserNameUser name this MU may have for loging processing, if available.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.17 |
ccMUInfoPktTxThis is sum of all good packets sent from different transmit
speed.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.18 |
ccMUInfoPktRxThis is sum of all good packets received from different transmit speed.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.19 |
ccMUInfoBytesTxNumber of bytes sent out.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.20 |
ccMUInfoBytesRxNumber of bytes received.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.21 |
ccMUInfoLastActNumber of seconds since the last MU activity.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.22 |
ccMUInfoVlanValue of 0, if not in used. Otherwise it's the VLAN ID.ro DisplayString .1.3.6.1.4.1.388.6.3.32.1.23 |
ccMUInfoAuthStateInforms whether the MU is authenticated or notro AuthState .1.3.6.1.4.1.388.6.3.32.1.24 |
ccMUInfoAuthMethodThe authentication method being used by the MU.ro AuthMethod .1.3.6.1.4.1.388.6.3.32.1.25 |
ccMUInfoEncrMethodThe Unicast encryption type being used by the MU.ro EncrType .1.3.6.1.4.1.388.6.3.32.1.26 |
ccMUInfoBCMCEncrTypeThe BroadCast encryption type being used by the MU.ro EncrType .1.3.6.1.4.1.388.6.3.32.1.27 |
ccMUInfoRoamCountDescription.ro Integer32 .1.3.6.1.4.1.388.6.3.32.1.28 |
ccACLObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.33 |
ccACLItemsTableA table for individual entries per ACL SEQUENCE OF CcACLItemsEntry .1.3.6.1.4.1.388.6.3.33.2 |
ccACLItemsEntryAn ACL Item object entry.
The instances in this table are the individual
ACL entries within each ACL object CcACLItemsEntry .1.3.6.1.4.1.388.6.3.33.2.1 |
ccACLItemIndexThe index of this specific entry per ACL INTEGER .1.3.6.1.4.1.388.6.3.33.2.1.1 |
ccACLItemThe individual ACL entry. The
format of the string returned is <MAC Addr,allow/deny>ro DisplayString .1.3.6.1.4.1.388.6.3.33.2.1.2 |
ccWVPNConfigure OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34 |
wvpnGeneralSettings OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.1 |
wvpnServerEnableThis is a Boolean variable. If set to true,
the WVPN server will be enabled. This is a
WRITE-ONLY value. To enable the WVPN
server, use a MIB instance of 0 and write a
dummy value of 1 to write to this variable.
Use 'wvpnStatus' to query the current state.
Note:If vpnsupport is not enabled then the walk over
this table will not return anything and the set
operation over any OID under ccWVPNConfigure will return an error
message- No creation.rw DoActionNow .1.3.6.1.4.1.388.6.3.34.1.1 |
wvpnServerDisableThis is a Boolean variable. If set to true,
the WVPN server will be disabled. This is a
WRITE-ONLY value. To disable the WVPN
server, use a MIB instance of 0 and write a
dummy value of 1 to write to this variable.
Use 'wvpnStatus' to query the current state.rw DoActionNow .1.3.6.1.4.1.388.6.3.34.1.2 |
wvpnServerRestartThis is a Boolean variable. If set to true,
the WVPN server will be re-started. Setting
to true is the only option allowed. This is
a WRITE-ONLY value. To restart the WVPN
server, use a MIB instance of 0 and write a
dummy value of 1 to write to this variable.
Use 'wvpnStatus' to query the current state.rw DoActionNow .1.3.6.1.4.1.388.6.3.34.1.3 |
wvpnIpAddressThe IP address of the WVPN server.ro DisplayString .1.3.6.1.4.1.388.6.3.34.1.4 |
wvpnPortThe port number of the WVPN server.
Default value is 9102.rw INTEGER .1.3.6.1.4.1.388.6.3.34.1.5 |
wvpnUnusedTimeoutThe timeout value (seconds) for any idle
WVPN session.rw Integer32 .1.3.6.1.4.1.388.6.3.34.1.6 |
wvpnStatusThe current status of the WVPN server.ro DisplayString .1.3.6.1.4.1.388.6.3.34.1.7 |
dosEnableThis is a Boolean variable to allow use of
tiny reliable UDP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.1.8 |
dosPortThe reliable UDP port number. Default value
is 9103.rw INTEGER .1.3.6.1.4.1.388.6.3.34.1.9 |
clientKeepAliveThis parameter controls the keep alive
functionality that sends echo requests each
period when no data has passed through the
session. If the WVPN server does not receive
any answers on two, subsequently sent, echos,
the client socket will be torn down. However,
the actual session is still there and is
controlled by the wvpnUnusedTimeout parameter.
Output is in Hour:Minute:Second format.
Valid input values are: 1 to 65535 (in seconds)rw DisplayString .1.3.6.1.4.1.388.6.3.34.1.10 |
vpnLicenseMaxThe maximum number of VPN sessions allowed
with the current licensing.ro INTEGER .1.3.6.1.4.1.388.6.3.34.1.11 |
vpnLicenseInUseThe current number of VPN sessions actually
in use.ro INTEGER .1.3.6.1.4.1.388.6.3.34.1.12 |
wvpnWtlsSettings OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.2 |
maxClientRsaKeySizeThe maximum number of bits that the client
certificate's public key is allowed to be. If
the server receives a client certificate and
this condition is not true, the client's socket
will be closed.
Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360.
Note that the MAX value cannot be less than the MIN value
which is defined by minClientRsaKeySize.rw INTEGER .1.3.6.1.4.1.388.6.3.34.2.1 |
minClientRsaKeySizeThe minimum number of bits that the client
certificate's public key is allowed to be. If
the server receives a client certificate and
this condition is not true, the client's socket
will be closed.
Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360.
Note that the MIN value cannot be greater than the MAX value
which is defined by maxClientRsaKeySize.rw INTEGER .1.3.6.1.4.1.388.6.3.34.2.2 |
maxRsaKeySizeThe maximum number of bits that the server
certificate's key is allowed to be. If a server
certificate is used that does not fulfill this
condition, the server is unusable.
Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360.
Note that the MAX value cannot be less than the MIN value
which is defined by minRsaKeySize.rw INTEGER .1.3.6.1.4.1.388.6.3.34.2.3 |
minRsaKeySizeThe minimum number of bits that the server
certificate's key is allowed to be. If a server
certificate is used that does not fulfill this
condition, the server is unusable.
Valid values are: 512,768,1024,1536,2048,3072,4096,7680,15360.
Note that the MIN value cannot be greater than the MAX value
which is defined by maxRsaKeySize.rw INTEGER .1.3.6.1.4.1.388.6.3.34.2.4 |
cipherA cipher for encrypting messages sent over the
VPN channel.
Can be one of the following values:
AES256, AES192, AES128, 3DES, DES56.
Default value is AES128.rw DisplayString .1.3.6.1.4.1.388.6.3.34.2.5 |
macA Message Authentication Code (MAC) algorithm
for verifying integrity of the messages sent over
the VPN.
Can be one of the following values:
MD5_128, MD5_80, MD5_40, SHA_512, SHA_384,
SHA_256, SHA_160, SHA_80, SHA_40, NO_MAC.
Default value is SHA_256.rw DisplayString .1.3.6.1.4.1.388.6.3.34.2.6 |
requireClientCertificateThis is a Boolean variable. WVPN server will
request client to present a certificate if the
value is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.2.7 |
keyRefreshWTLS key refresh rate. The parties will refresh
the session key after each 2^N (2 to the Nth
power) exchanged packets, where N is the key
refresh rate value.
If N is 0, the key is refreshed after each packetrw INTEGER .1.3.6.1.4.1.388.6.3.34.2.8 |
wantedFipsModeIf set to true, only FIPS 140-2 compliant
cryptographic algorithms are used to establish
a VPN session.ro DisplayString .1.3.6.1.4.1.388.6.3.34.2.9 |
securityModeThe current securityMode. Value can be
customSecurity or defaultSecurity.
Default security mode is defaultSecurity.rw DisplayString .1.3.6.1.4.1.388.6.3.34.2.10 |
serverNumberA server number must be between 1 and 15.
This number is only relevant if there is a
cluster of servers.rw INTEGER .1.3.6.1.4.1.388.6.3.34.2.11 |
handshakeTimeoutThe number of seconds that the WVPN server
allows a client to perform the whole WTLS
handshake. If it times out, the client socket
will be closed. Default value is 90 seconds.
The valid range of Hand shake timeout is 1 to
10000 (in seconds).rw DisplayString .1.3.6.1.4.1.388.6.3.34.2.12 |
allowSessionResumeThis is a Boolean variable. If set to true,
the WVPN server allows a client to do a session
resume (i.e., a secure abbreviated handshake).
If set to false, then only full handshakes are
allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.2.13 |
wvpnAuthServerSettings OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.3 |
useSimpleAuthenticationSpecify whether Simple Authentication is used
or not. Value could be true(1) or false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.3.1 |
useRadiusAuthenticationThis is a Boolean variable. If set to true,
RADIUS Authentication will be enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.3.2 |
useLdapAuthenticationThis is a Boolean variable. If set to true,
LDAP Authentication will be enabled. This
feature is not implemented.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.3.3 |
useLocalDatabaseAuthenticationThis is a Boolean variable. If set to true,
Local Database Authentication will be enabled.
This feature is not implemented.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.3.4 |
simpleAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.3.5 |
simpleAuthUserNameThe Simple Authentication user name.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.5.1 |
simpleAuthPasswordThe Simple Authentication user password.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.5.2 |
simpleAuthDomainThe Simple Authentication domain.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.5.3 |
wvpnRadiusAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.3.6 |
radiusAuthPrimaryServer OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.3.6.1 |
radiusAuthPrimaryHostThe host name or IP address of the primary RADIUS server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.6.1.1 |
radiusAuthPrimaryPortThe UDP port the client is using to send requests to the
primary RADIUS server.rw Integer32 .1.3.6.1.4.1.388.6.3.34.3.6.1.2 |
radiusAuthPrimaryMaxRetriesThe maximum number of times a client is allowed to try
authenticating with the primary RADIUS server.
Valid input values are from 1 to 10.rw Integer32 .1.3.6.1.4.1.388.6.3.34.3.6.1.3 |
radiusAuthPrimaryTimeOutThe number of seconds in between retries to the
primary RADIUS server.
Valid input values are from 5 to 20.rw Integer32 .1.3.6.1.4.1.388.6.3.34.3.6.1.4 |
radiusAuthPrimaryUserPasswordSome RADIUS servers require a user password
to be set even though no password is required.
If set, the WVPN server will send this password
to the RADIUS server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.6.1.5 |
radiusAuthPrimarySecretThe value used to encrypt RADIUS traffic to and
from the RADIUS server. A secret shared between
the RADIUS server and the WVPN server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.6.1.6 |
radiusAuthSecondaryServer OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.3.6.2 |
radiusAuthSecondaryHostThe host name or IP address of the secondary RADIUS server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.6.2.1 |
radiusAuthSecondaryPortThe UDP port the client is using to send requests to the
secondary RADIUS server.rw Integer32 .1.3.6.1.4.1.388.6.3.34.3.6.2.2 |
radiusAuthSecondaryMaxRetriesThe maximum number of times a client is allowed to try
authenticating with the secondary RADIUS server.
Valid input values are from 1 to 10.rw Integer32 .1.3.6.1.4.1.388.6.3.34.3.6.2.3 |
radiusAuthSecondaryTimeOutThe number of seconds in between retries to the
secondary RADIUS server.
Valid input values are from 5 to 20rw Integer32 .1.3.6.1.4.1.388.6.3.34.3.6.2.4 |
radiusAuthSecondaryUserPasswordSome RADIUS servers require a user password
to be set even though no password is required.
If set, the WVPN server will send this password
to the RADIUS server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.6.2.5 |
radiusAuthSecondarySecretThe value used to encrypt RADIUS traffic to and
from the RADIUS server. A secret shared between
the RADIUS server and the WVPN server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.3.6.2.6 |
wvpnIpPoolsSettings OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.4 |
wvpnAddIpPoolObjAdd an IP Pool object to the wvpnIpPoolsTable.
Input string format: <pool_name,begin_ip,end_ip>.
Max length of pool_name is 32 bytes, and begin_ip
and end_ip are IP Addresses.
Characters not allowed in the pool_name:
` @ # $ & ( ) | = \ ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.4.1 |
wvpnRemIpPoolObjRemove an IP Pool object from wvpnIpPoolsTable.
Input string format: <pool_name>.
Max length of pool_name is 32 bytes.
Characters not allowed in the IPpool_name:
` @ # $ & ( ) | = \ ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.4.2 |
wvpnAddIpPoolRangeAdd an IP address range to an IP Pool object
in the wvpnIpPoolsTable.
Input string format: <pool_name,begin_ip,end_ip>.
Max length of pool_name is 32 bytes, and begin_ip
and end_ip are IP Addresses.
Characters not allowed in the IPpool_name:
` @ # $ & ( ) | = \ ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.4.3 |
wvpnRemIpPoolRangeRemove an IP address range from an IP Pool object
in the wvpnIpPoolsTable.
Input string format: <pool_name,begin_ip,end_ip>.
Max length of pool_name is 32 bytes, and begin_ip
and end_ip are IP Addresses.
Characters not allowed in the IPpool_name:
` @ # $ & ( ) | = \ ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.4.4 |
useDhcpGatewayThis is a Boolean variable. If set to true,
DHCP is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.4.5 |
wvpnIpPoolsTableThe IP Pools Table SEQUENCE OF WvpnIpPoolsEntry .1.3.6.1.4.1.388.6.3.34.4.6 |
wvpnIpPoolsEntryAn IP Pool object. WvpnIpPoolsEntry .1.3.6.1.4.1.388.6.3.34.4.6.1 |
wvpnIpPoolIndexAn integer index for the wvpnIpPoolsTable to
access an IP Pool object.ro Integer32 .1.3.6.1.4.1.388.6.3.34.4.6.1.1 |
clientIpPoolNameThis is the client's IP Pool name.
Max length of pool name is 32 bytes.
Characters not allowed in the pool name:
` @ # $ & ( ) | = \ ; double-quote ' < > / sprw DisplayString .1.3.6.1.4.1.388.6.3.34.4.6.1.2 |
clientNetMaskclientNetMaskrw IpAddress .1.3.6.1.4.1.388.6.3.34.4.6.1.3 |
clientDhcpServerAddressThis is the client's DHCP server IP address.rw IpAddress .1.3.6.1.4.1.388.6.3.34.4.6.1.4 |
clientDefaultGatewayAddressThis is the client's default gateway address.rw IpAddress .1.3.6.1.4.1.388.6.3.34.4.6.1.5 |
clientDnsAddressThis is the client's DNS server IP address.rw IpAddress .1.3.6.1.4.1.388.6.3.34.4.6.1.6 |
clientWinsAddressThis is the client's WINS address.rw IpAddress .1.3.6.1.4.1.388.6.3.34.4.6.1.7 |
clientDomainNameThis is the client's domain name.rw DisplayString .1.3.6.1.4.1.388.6.3.34.4.6.1.8 |
clientNetBiosNodeTypeThis is the client's Net Bios Node type.rw DisplayString .1.3.6.1.4.1.388.6.3.34.4.6.1.9 |
clientDhcpLeaseTimeThis is currently not supported in this version.ro DisplayString .1.3.6.1.4.1.388.6.3.34.4.6.1.10 |
reuseAddrTimeWhen client's IP returns to DHCP IP pool, this
is the amount of time required before IP can be
reused. Input required in seconds. Output also is
in seconds.rw Integer32 .1.3.6.1.4.1.388.6.3.34.4.6.1.11 |
ipRangeCountThe total number of IP address ranges that
exist for a particular IP pool object.ro Integer32 .1.3.6.1.4.1.388.6.3.34.4.6.1.12 |
clientIpRangesList of client's IP address ranges. Ranges are
separated by a comma, and the start and end of
each range is separated by a hyphen.ro DisplayString .1.3.6.1.4.1.388.6.3.34.4.6.1.13 |
wvpnIpPoolsCountTotal size of the IP Pool object list.ro Integer32 .1.3.6.1.4.1.388.6.3.34.4.7 |
wvpnIpPoolsNamesComma-separated list of client IP Pool names.ro DisplayString .1.3.6.1.4.1.388.6.3.34.4.8 |
wvpnCertificateSettings OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.5 |
wvpnServerCertificateTableDescription. SEQUENCE OF WvpnServerCertificateEntry .1.3.6.1.4.1.388.6.3.34.5.1 |
wvpnServerCertificateEntryDescription. WvpnServerCertificateEntry .1.3.6.1.4.1.388.6.3.34.5.1.1 |
wvpnCertIndexAn integer index for wvpnServerCertificateTable
to access a certificate.ro Integer32 .1.3.6.1.4.1.388.6.3.34.5.1.1.1 |
userNameThe name that identifies the certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.2 |
serialNumberThe serial number of the certificate.rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.3 |
subjectThe subject of the certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.4 |
versionThe version of the certificate format.rw INTEGER .1.3.6.1.4.1.388.6.3.34.5.1.1.5 |
issuerThe issuer of the certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.6 |
keyLengthThe key length of the certificate.ro INTEGER .1.3.6.1.4.1.388.6.3.34.5.1.1.7 |
validFromThe start validity date of the certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.8 |
validToThe expiry date of the certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.9 |
certificateServer certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.10 |
binaryThe certificate in hex binary notation.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.11 |
fingerPrintA hash over the entire certificate that is
statistically unique. The hash algorithm is
SHA-1, and the binary hash is converted to hex
encoded representation.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.12 |
authFingerPrintThis is not supported in the current version.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.1.1.13 |
serverCertCountThe total number of end users in the
wvpnServerCertificateTable.
The value is either 0 or 1.ro INTEGER .1.3.6.1.4.1.388.6.3.34.5.2 |
serverCertUserNamesA list of certificate user names.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.3 |
wvpnCaCertificateTableA table of WVPN CA certificates. SEQUENCE OF WvpnCaCertificateEntry .1.3.6.1.4.1.388.6.3.34.5.4 |
wvpnCaCertificateEntryDescription. WvpnCaCertificateEntry .1.3.6.1.4.1.388.6.3.34.5.4.1 |
wvpnCaCertIndexAn integer index for wvpnCaCertificateTable
to access a CA certificate.rw INTEGER .1.3.6.1.4.1.388.6.3.34.5.4.1.1 |
wvpnCaSerialNumberThe serial number of the CA certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.2 |
wvpnCaSubjectThe subject of the CA certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.3 |
wvpnCaVersionThe version of the CA certificate format.ro INTEGER .1.3.6.1.4.1.388.6.3.34.5.4.1.4 |
wvpnCaIssuerThe issuer of the CA certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.5 |
wvpnCaKeyLengthThe key length of the CA certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.6 |
wvpnCaValidFromThe start validity date of the CA certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.7 |
wvpnCaValidToThe expiry date of the CA certificate.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.8 |
wvpnCaBinaryThe CA certificate in Hex binary notation.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.9 |
wvpnCaFingerPrintA hash over the entire certificate that is
statistically unique. The hash algorithm is
SHA-1, and the binary hash is converted to hex
encoded representation.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.10 |
wvpnCaAuthFingerPrintThis is not supported in the current version.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.4.1.11 |
caCertCountThe total number of certificate serial numbers
in the wvpnCaCertificateTable.ro INTEGER .1.3.6.1.4.1.388.6.3.34.5.5 |
certSerialNumbersA list of certificate serial numbers.
Serial numbers are comma delimited.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.6 |
importServerCertImport a server certificate that is already
residing on the local machine.
Input String format:
<serverCertFile,password,certFileName>
serverCertFile must be an absolute path to
the file. Furthermore, the certificate file must be
specified if the serverCertFile does not have
an embedded certificate. certFileName is
optional, but if specified, it must be an absolute
path to the file.
Characters not allowed in both serverCertFile
and certFileName:
` @ # $ & | = ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.7 |
removeServerCertRemove a server certificate from the
wvpnServerCertificateTable.
Input string format: <UserName>
Characters not allowed in UserName:
` @ # $ & | = ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.8 |
importCaCertImport a CA certificate that is already
residing on the local machine.
Input String format: <caCertFile>
caCertFile must be an absolute path to the file.
Characters not allowed in caCertFile:
` @ # $ & | = ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.9 |
removeCaCertRemove a CA certificate at a given index
from the wvpnCaCertificateTable. This is a
WRITE-ONLY value.rw INTEGER .1.3.6.1.4.1.388.6.3.34.5.10 |
importTftpServerCertImport a server certificate from a remote machine
via TFTP.
Input String format:
<hostIPaddr,serverCertFile,password,certFileName>
certFileName is optional, but if specified,
it must be an absolute path to the file.
serverCertFile must be an absolute path to the
file. The certificate file must be specified if
the serverCertFile does not have an embedded
certificate.
Characters not allowed in both serverCertFile
and certFileName:
` @ # $ & | = ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.11 |
importTftpCaCertImport a CA certificate from a remote machine
via TFTP.
Input String format: <hostIPaddr,caCertFile>
caCertFile must be an absolute path to the file.
Characters not allowed in caCertFile:
` @ # $ & | = ; double-quote ' < > / sp
This is a WRITE-ONLY value.rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.12 |
dirCertDumps a list of certificate files. This
diagnostic tool lists the certificate files
left over from upload operations - it does
not display or affect certificates installed
in the WVPN server. The files are given in
a comma-separated list.
The 'dumpCert' object can be used to examine
any of the listed certificate files in further
detail.
This is a READ-ONLY value.ro DisplayString .1.3.6.1.4.1.388.6.3.34.5.13 |
dumpCertDumps the contents of a certificate
file. This diagnostic tool dumps the
certificate files left over from upload
operations - it does not dump or affect
certificates installed in the WVPN server.
Using this variable is a two-step
process: first a SET request must be
used to feed in the name of the
certificate file to be decoded, then
a GET request will retrieve the decoded
contents of the certificate file.
The input for the SET command is the
relative path of a file containing a
certificate.
Example: wtls_ca.cer
The certificate file must be in the
internal upload directory (/upload/wvpn).rw DisplayString .1.3.6.1.4.1.388.6.3.34.5.14 |
wvpnDDNSSettings OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.6 |
clearClientDNSRemove all client IP addresses registered in
the DNS server by the WVPN server. This is a
WRITE-ONLY value. To set it, use a MIB
instance value of 0.rw DoActionNow .1.3.6.1.4.1.388.6.3.34.6.1 |
updateClientDNSRe-register in the DNS server all client IP
addresses owned by the WVPN server. This is a
WRITE-ONLY value. To set it, use a MIB
instance value of 0.rw DoActionNow .1.3.6.1.4.1.388.6.3.34.6.2 |
addDNSAddrAdd a DNS server IP address. This is a
WRITE-ONLY value. To set it, use a MIB
instance value of 0.rw IpAddress .1.3.6.1.4.1.388.6.3.34.6.3 |
deleteDNSAddrRemove a DNS server IP address. This is a
WRITE-ONLY value. To set it, use a MIB
instance value of 0.rw IpAddress .1.3.6.1.4.1.388.6.3.34.6.4 |
enableEnable or disable DDNS service, or query the
DDNS status. To get or set it, use a MIB
instance value of 0.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.3.34.6.5 |
ttlThe time-to-live (ttl) value for a resource
record stored in the DNS server. TTL is
expressed as a percentage of the unused session
timeout. To set it, use a MIB instance value
of 0.rw INTEGER .1.3.6.1.4.1.388.6.3.34.6.6 |
forwardZoneThe forward zone name of the DNS server. To
set it, use a MIB instance value of 0.rw DisplayString .1.3.6.1.4.1.388.6.3.34.6.7 |
reverseZoneThe reverse zone name of the DNS server. To
set it, use a MIB instance value of 0.rw DisplayString .1.3.6.1.4.1.388.6.3.34.6.8 |
clientNameStringA format string used by the WVPN server to
construct client FQDN. To set it, use a MIB
instance value of 0.rw DisplayString .1.3.6.1.4.1.388.6.3.34.6.9 |
wvpnDDNSAddressTableA table of DDNS IP addresses. SEQUENCE OF WvpnDDNSAddressEntry .1.3.6.1.4.1.388.6.3.34.6.10 |
wvpnDDNSAddressEntryDescription. WvpnDDNSAddressEntry .1.3.6.1.4.1.388.6.3.34.6.10.1 |
wvpnDDNSAddressIndexAn integer index for the wvpnDDNSAddressTable
to access a DNS server IP address.ro INTEGER .1.3.6.1.4.1.388.6.3.34.6.10.1.1 |
wvpnDDNSipAddressThe IP address of the DNS server.rw IpAddress .1.3.6.1.4.1.388.6.3.34.6.10.1.2 |
cleanupTimeoutDuration of cleanup timeout in sec.rw INTEGER .1.3.6.1.4.1.388.6.3.34.6.11 |
reverseZoneListList reverse zones of the DNS server.ro DisplayString .1.3.6.1.4.1.388.6.3.34.6.12 |
reverseZoneAddAdd new reverse zones for the DNS server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.6.13 |
reverseZoneDelDelete a reverse zone from a list of
reverse zones of the DNS Server.rw DisplayString .1.3.6.1.4.1.388.6.3.34.6.14 |
wvpnRuntimeStats OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.3.34.7 |
wvpnSessionTableDescription. SEQUENCE OF WvpnSessionEntry .1.3.6.1.4.1.388.6.3.34.7.1 |
wvpnSessionEntryDescription. WvpnSessionEntry .1.3.6.1.4.1.388.6.3.34.7.1.1 |
wvpnSessionIndexAn integer index for wvpnSessionTable to access
a VPN sessionro Integer32 .1.3.6.1.4.1.388.6.3.34.7.1.1.1 |
wvpnSessionIdThe internal ID number by which the WVPN
server identifies the session.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.2 |
wvpnVpnIpThe private IP address assigned to the VPN
client.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.3 |
wvpnRealIpThe public IP address of the client prior
to connecting to the VPN server.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.4 |
wvpnLoginTimeThe login time of the clientro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.5 |
wvpnRoamTimeDescription.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.6 |
wvpnLastActiveThe last time that the client was active.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.7 |
wvpnPoolNameThe IP Pool from which the client got its' VPN
IP address.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.8 |
wvpnMacAddrThe MAC address of the client.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.1.1.9 |
wvpnSessionCountThe number of VPN sessions.
This is a READ-ONLY value.ro Integer32 .1.3.6.1.4.1.388.6.3.34.7.2 |
wvpnRefreshSessionRefreshes the VPN session info. Returns a blank string
This is a READ-ONLY value.ro DisplayString .1.3.6.1.4.1.388.6.3.34.7.3 |
wvpnKillSessionKills the VPN session specified by the written
index number. For Example: setting this value to
4 would kill the fourth VPN session in the current
list.
This is a WRITE-ONLY value. Reading it will
always return 0.rw INTEGER .1.3.6.1.4.1.388.6.3.34.7.4 |
symbolCCPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.4 |
symbolCCFault OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.5 |
ccTargetObjects OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.5.1 |
ccTargetTrapStringString that varies based on the trap that is being sent.ro DisplayString .1.3.6.1.4.1.388.6.5.1.1 |
ccTargetAddrTableA table of transport addresses to be used in the generation
of SNMP messages.
Note: After make changes for this table objects, in order to
make those modifications effective immediately, there are two
operations which should be performed in the following order:
1. SET ccSnmpOpers object to 3 (Update Configuration).
2. SET ccSNMPFlag object to 'true'.
Both ccSnmpOpers and ccSNMPFlag objects are under
ccSysCfg tree. SEQUENCE OF CcTargetAddrEntry .1.3.6.1.4.1.388.6.5.1.2 |
ccTargetAddrEntryA transport address to be used in the generation
of SNMP operations.
Entries in the ccTargetAddrTable are created and
deleted using the ccTargetAddrRowStatus object. CcTargetAddrEntry .1.3.6.1.4.1.388.6.5.1.2.1 |
ccTargetAddrNameThe locally arbitrary, but unique identifier associated
with this ccTargetAddrEntry. Integer32 .1.3.6.1.4.1.388.6.5.1.2.1.1 |
ccTargetAddrSecNameThis object contains a target(such as a snmp manager) secName.rw DisplayString .1.3.6.1.4.1.388.6.5.1.2.1.2 |
ccTargetAddrHostThis object contains a target(such as a snmp manager) ip address.rw DisplayString .1.3.6.1.4.1.388.6.5.1.2.1.3 |
ccTargetAddrCommunityThis object contains a community name.rw DisplayString .1.3.6.1.4.1.388.6.5.1.2.1.4 |
ccTargetAddrPortThis object specifies a port number for remote manager receiving the trap.rw Integer32 .1.3.6.1.4.1.388.6.5.1.2.1.5 |
ccTargetAddrStorageTypeThe storage type for this conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.1.2.1.6 |
ccTargetAddrRowStatusThe status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the ccTargetAddrRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding instances of
ccTargetAddrTDomain, ccTargetAddrTAddress, and
ccTargetAddrParams have all been set.
The following objects may not be modified while the
value of this object is active(1):
- ccTargetAddrTDomain
- ccTargetAddrTAddress
An attempt to set these objects while the value of
ccTargetAddrRowStatus is active(1) will result in
an inconsistentValue error.
Note:While destroying a row set the manager's
re-transmission value as zero as the agent is
re-started and there is no response from agent
fot this request and the manager keeps on
re-transmitting resulting into multiple row
deletion depending on the value of re-transmission.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.1.2.1.7 |
ccTargetAddrOptionThe write option for this conceptual row.
com2sec(0), for setting up remote manager address.
trap2sink(1), for setting up V2c trap target address.
trapsink(2), for setting up V1 trap target address.
com2secAndtrap2sink(3), write the row record to both <com2sec>,
and <trap2sink> section in snmpd.conf.
all(4)rw TargetOptions .1.3.6.1.4.1.388.6.5.1.2.1.8 |
ccTrapInfos OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.5.2 |
ccTrapInfoEnableTrap(true) implies that the traps subsystem is enabled.
(false) implies that the traps subsystem is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.1 |
ccTrapInfoMaxNumSendOneTrapThe maximum number of times for sending one trap
over the interval specified in ccTrapInfoInterval.rw INTEGER .1.3.6.1.4.1.388.6.5.2.2 |
ccTrapInfoIntervalNo more than ccTrapInfoMaxNumSendOneTrap traps of
same kind may be sent within this interval(in seconds).rw INTEGER .1.3.6.1.4.1.388.6.5.2.3 |
ccTrapInfoAclViolationEnable(true)/Disable(false) this trap.
MU assoc failed [ACL violation]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.4 |
ccTrapInfoDenyAdoptionEnable(true)/Disable(false) this trap.
AP adopt failure [general]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.5 |
ccTrapInfoAPMUMaxExceedEnable(true)/Disable(false) this trap.
AP max MU count reachedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.6 |
ccTrapInfoWLANMUMaxExceedEnable(true)/Disable(false) this trap.
WLAN max MU count reachedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.7 |
ccTrapInfoApDetectedEnable(true)/Disable(false) this trap.
AP detectedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.8 |
ccTrapInfoApAdoptedEnable(true)/Disable(false) this trap.
AP status [adopted]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.9 |
ccTrapInfoApResetEnable(true)/Disable(false) this trap.
AP status [reset]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.10 |
ccTrapInfoApUnavailableEnable(true)/Disable(false) this trap.
AP status [offline]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.11 |
ccTrapInfoKDCUserAuthFailEnable(true)/Disable(false) this trap.
MU Kerberos auth failedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.13 |
ccTrapInfoRadiusAuthFailEnable(true)/Disable(false) this trap.
Mgt user auth failed [radius]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.14 |
ccTrapInfoLowFlashSpaceEnable(true)/Disable(false) this trap.
Low flash space on switchrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.16 |
ccTrapInfoNicDroppingEnable(true)/Disable(false) this trap.
Ether port disconnectedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.17 |
ccTrapInfoApAlertEnable(true)/Disable(false) this trap.
AP status [alert]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.19 |
ccTrapInfoUserAuthFailEnable(true)/Disable(false) this trap.
Mgt user auth rejectedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.20 |
ccTrapInfoHsbPrimaryNoHeartbeatEnable(true)/Disable(false) this trap.
Primary lost heartbeatrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.21 |
ccTrapInfoHsbStandbyEntersFailoverEnable(true)/Disable(false) this trap.
Standby activerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.22 |
ccTrapInfoPrimaryFailedResettingEnable(true)/Disable(false) this trap.
Primary internal failure [reset]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.23 |
ccTrapInfoKDCPropagationFailEnable(true)/Disable(false) this trap.
KDC propagation failurerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.25 |
ccTrapInfoHighDecryptFailEnable(true)/Disable(false) this trap.
MU TKIP [decrypt failure]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.26 |
ccTrapInfoHighReplyFailEnable(true)/Disable(false) this trap.
MU TKIP [replay failure]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.27 |
ccTrapInfoTKIPMICFailEnable(true)/Disable(false) this trap.
MU TKIP [MIC error]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.28 |
ccTrapInfoWPACounterMeasureStartEnable(true)/Disable(false) this trap.
WPA counter-measures [active]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.29 |
licenseChangedControlEnable(true)/Disable(false) this trap.
License number changerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.31 |
clockChangedControlEnable(true)/Disable(false) this trap.
Clock changerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.32 |
pktDiscWrongNICControlEnable(true)/Disable(false) this trap.
Packet discard [wrong NIC]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.33 |
pktDiscWrongVLANControlEnable(true)/Disable(false) this trap.
Packet discard [wrong VLAN]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.34 |
apAdoptFailPolControlEnable(true)/Disable(false) this trap.
AP adopt failure [policy disallow]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.35 |
apAdoptFailACLControlEnable(true)/Disable(false) this trap.
AP adopt failure [acl disallow]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.36 |
apAdoptFailLimitControlEnable(true)/Disable(false) this trap.
AP adopt failure [limit exceeded]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.37 |
apAdoptFailLicControlEnable(true)/Disable(false) this trap.
AP adopt failure [license disallow]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.38 |
apAdoptFailNoImgControlEnable(true)/Disable(false) this trap.
AP adopt failure [no image]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.39 |
apCfgFailESSControlEnable(true)/Disable(false) this trap.
AP config failed [wrong ESS]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.40 |
devDropInfoMsgControlEnable(true)/Disable(false) this trap.
Device msg dropped [info]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.41 |
devdropLoadmeMsgControlEnable(true)/Disable(false) this trap.
Device msg dropped [loadme]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.42 |
etherConnectControlEnable(true)/Disable(false) this trap.
Ether port connectedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.43 |
muAssocFailControlEnable(true)/Disable(false) this trap.
MU assoc failedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.44 |
muAssocOKControlEnable(true)/Disable(false) this trap.
MU status [associated]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.45 |
muRoamedControlEnable(true)/Disable(false) this trap.
MU status [roamed]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.46 |
muDisassocControlEnable(true)/Disable(false) this trap.
MU status [disassociated]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.47 |
muEAPAuthFailControlEnable(true)/Disable(false) this trap.
MU EAP auth failedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.48 |
muEAPAuthOKControlEnable(true)/Disable(false) this trap.
MU EAP auth successrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.49 |
muKDCAuthOKControlEnable(true)/Disable(false) this trap.
MU Kerberos auth successrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.50 |
wlanAuthOKControlEnable(true)/Disable(false) this trap.
WLAN auth successrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.51 |
wlanAuthFailControlEnable(true)/Disable(false) this trap.
WLAN auth failedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.52 |
userAuthOKControlEnable(true)/Disable(false) this trap.
Mgt user auth success [radius]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.53 |
radiusSrvTimeoutControlEnable(true)/Disable(false) this trap.
Radius server timeoutrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.54 |
kdcPrincAddControlEnable(true)/Disable(false) this trap.
KDC user [added]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.55 |
kdcPrincChgdControlEnable(true)/Disable(false) this trap.
KDC user [changed]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.56 |
kdcPrincDelControlEnable(true)/Disable(false) this trap.
KDC user [deleted]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.57 |
kdcDBReplacedControlEnable(true)/Disable(false) this trap.
KDC DB replacedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.58 |
hsbStdbyAutoRevControlEnable(true)/Disable(false) this trap.
Standy auto-revertrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.59 |
hsbPrimAutoRevControlEnable(true)/Disable(false) this trap.
Primary auto-revertrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.60 |
acsErrorControlEnable(true)/Disable(false) this trap.
Auto channel select errorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.61 |
eopActiveControlEnable(true)/Disable(false) this trap.
Emergency Policy [active]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.62 |
eopInactiveControlEnable(true)/Disable(false) this trap.
Emergency Policy [deactivated]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.63 |
debugEventControlThis trap is read only.
Miscellaneous debug eventsro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.64 |
hsbStartUpControlEnable(true)/Disable(false) this trap.
HSB Starts Uprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.65 |
hsbPeerConnectControlEnable(true)/Disable(false) this trap.
HSB Peer Connectrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.66 |
ccFanAndTempControlEnable(true)/Disable(false) this trap.
Fan and Temp Notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.67 |
ccAccessChangedControlEnable(true)/Disable(false) this trap.
Access Changed Notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.68 |
tpcPowerReducedControlEnable(true)/Disable(false) this trap.
Radio power is reduced [TPC]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.69 |
dfsRadarDetectControlEnable(true)/Disable(false) this trap.
Radar is detected [DFS]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.70 |
dfsChannelSelectControlEnable(true)/Disable(false) this trap.
Channel selected to avoid radar [DFS]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.71 |
dfsChannelSwitchControlEnable(true)/Disable(false) this trap.
Switch to new channel [DFS]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.72 |
dfsChannelRevertControlEnable(true)/Disable(false) this trap.
Revert back to original channel [DFS]rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.73 |
radioSuspendControlEnable(true)/Disable(false) this trap.
Radio is suspended - no available channelsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.74 |
radioResumeControlEnable(true)/Disable(false) this trap.
Radio is resumedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.75 |
radioRandomChannelControlEnable(true)/Disable(false) this trap.
Radio is moved to random channelrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.76 |
ccRapNewRogueApControlDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.77 |
ccRapNewApprovedApControlDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.78 |
ccTrapInfoWVPNAlertEnable(1)/Disable(2) this trap.
This trap is sent when there are any
anomalies with the client/server certificates.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.79 |
ccTrapInfoWVPNInfoEnable(1)/Disable(2) this trap.
This trap is sent when there are any client/server
configuration changes or connection establishments.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.80 |
ccTrapInfoRadiusAcctEnable(1)/Disable(2) the trap for Radius Accounting Log.
This trap is not supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.81 |
ccInfoRadiusServerControlEnable(1)/Disable(2) this trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.82 |
configChangeUpdateControlEnable(1)/Disable(2) this trap.
This trap is sent whenever there is a configuration
change in the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.83 |
tunnelStatusChangedControlEnable(1)/Disable(2) this trap.
This trap is sent whenever there is a Tuneel Status Changerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.84 |
tunnelUnknownProtocolControlEnable(1)/Disable(2) this trap.
This trap is sent whenever there is a non Ip packet received on Tunnelrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.85 |
ccSumStatsApControlDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.86 |
ccSumStatsMuControlDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.87 |
ccSumStatsWlanControlDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.88 |
ccSumStatsSwitchControlDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.89 |
sensorConvertControlEnable(1)/Disable(2) this trap.
This trap is sent when
AP is converted to sensorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.90 |
sensorRevertControlEnable(1)/Disable(2) this trap.
This trap is sent when Sensor is reverted back to APrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.91 |
sensorFailureControlEnable(1)/Disable(2) this trap.
This trap is sent when Failed to communicate to a sensorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.92 |
sensorOfflineControlEnable(1)/Disable(2) this trap.
This trap is sent when Sensor is no longer responding to pingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.5.2.93 |
symbolCCTraps OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.5.3 |
ccTrapLowFlashSpaceLow flash space on switch
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
sysLowFlashSpace NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.1 |
ccTrapNicDroppingEther port disconnected
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
etherDisconnect NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.3 |
ccTrapAPMUMaxExceedAP max MU count reached
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apMaxMU NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.6 |
ccTrapWLANMUMaxExceedWLAN max MU count reached
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
wlanMaxMUCount NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.7 |
ccTrapAPDetectedAP detected
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apDetected NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.8 |
ccTrapAPAdoptedAP status [adopted]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apAdopted NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.9 |
ccTrapAPResetAP status [reset]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apReset NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.10 |
ccTrapAPUnavailableAP status [offline]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apOffline NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.11 |
ccTrapAPAlertAP status [alert]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apAlert NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.12 |
ccTrapUserAuthFailMgt user auth rejected
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
userAuthRejected NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.13 |
ccTrapRadiusAuthFailMgt user auth failed [radius]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
userAuthFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.14 |
ccTrapACLViolationMU assoc failed [ACL violation]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
muAssocFailACL NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.16 |
ccTrapDenyAPAdoptionAP adopt failure [general]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
apAdoptFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.18 |
ccTrapHsbPrimaryNoHeartbeatPrimary lost heartbeat
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
hsbPrimHBLoss NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.20 |
ccTrapHsbStandbyEntersFailoverStandby active
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
hsbFailover NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.21 |
ccTrapHsbPrimaryFailedResettingPrimary internal failure [reset]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
hsbPrimFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.22 |
ccTrapHsbStandbyFailedResettingStandby internal failure [reset]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
hsbStdbyFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.23 |
ccTrapKDCUserAuthFailMU Kerberos auth failed
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
muKDCAuthFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.24 |
ccTrapKDCPropagationFailKDC propagation failure
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
kdcPropFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.25 |
ccTrapHighDecryptFailMU TKIP [decrypt failure]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
muTKIPDecyptFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.26 |
ccTrapHighReplyFailMU TKIP [replay failure]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
muTKIPReplayFail NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.27 |
ccTrapTKIPMICFailMU TKIP [MIC error]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
muTKIPMicError NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.28 |
ccTrapWPACounterMeasureStartWPA counter-measures [active]
This is a 1.1.4.30SP1 trap and corresponds to the 1.2 event -
wpaCntrMsrAct NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.29 |
licenseChangedLicense number change NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.31 |
clockChangedClock change NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.32 |
pktDiscWrongNICPacket discard [wrong NIC] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.33 |
pktDiscWrongVLANPacket discard [wrong VLAN] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.34 |
apAdoptFailPolAP adopt failure [policy disallow] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.35 |
apAdoptFailACLAP adopt failure [acl disallow] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.36 |
apAdoptFailLimitAP adopt failure [limit exceeded] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.37 |
apAdoptFailLicAP adopt failure [license disallow] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.38 |
apAdoptFailNoImgAP adopt failure [no image] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.39 |
apCfgFailESSAP config failed [wrong ESS] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.40 |
devDropInfoMsgDevice msg dropped [info] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.41 |
devdropLoadmeMsgDevice msg dropped [loadme] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.42 |
etherConnectEther port connected NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.43 |
muAssocFailMU assoc failed NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.44 |
muAssocOKMU status [associated] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.45 |
muRoamedMU status [roamed] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.46 |
muDisassocMU status [disassociated] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.47 |
muEAPAuthFailMU EAP auth failed NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.48 |
muEAPAuthOKMU EAP auth success NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.49 |
muKDCAuthOKMU Kerberos auth success NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.50 |
wlanAuthOKWLAN auth success NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.51 |
wlanAuthFailWLAN auth failed NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.52 |
userAuthOKMgt user auth success [radius] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.53 |
radiusSrvTimeoutRadius server timeout NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.54 |
kdcPrincAddKDC user [added] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.55 |
kdcPrincChgdKDC user [changed] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.56 |
kdcPrincDelKDC user [deleted] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.57 |
kdcDBReplacedKDC DB replaced NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.58 |
hsbStdbyAutoRevStandy auto-revert NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.59 |
hsbPrimAutoRevPrimary auto-revert NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.60 |
acsErrorAuto channel select error NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.61 |
eopActiveEmergency Policy [active] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.62 |
eopInactiveEmergency Policy [deactivated] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.63 |
debugEventMiscellaneous debug events NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.64 |
hsbStartUpHSB Starts Up NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.65 |
hsbPeerConnectHSB Peer Connect NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.66 |
ccFanAndTempNotificationNotification sent if the given threshold has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.67 |
ccAccessChangedNotificationThis notification is sent if the permitted methods of
access has changed. Note that each change to the access
methods permitted generates a separate notification. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.68 |
tpcPowerReducedRadio power is reduced [TPC] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.69 |
dfsRadarDetectRadar is detected [DFS] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.70 |
dfsChannelSelectChannel selected to avoid radar [DFS] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.71 |
dfsChannelSwitchSwitch to new channel [DFS] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.72 |
dfsChannelRevertRevert back to original channel [DFS] NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.73 |
radioSuspendRadio is suspended - no available channels NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.74 |
radioResumeRadio is resumed NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.75 |
radioRandomChannelRadio is moved to random channel NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.76 |
ccRapNewRogueApA new AP has been heard that was NOT authorized. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.77 |
ccRapNewApprovedApA new AP has been heard that was in some manner
authorized. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.78 |
ccTrapWVPNAlertccTrapWVPNAlert trap.
This trap is sent when there are any anomalies with
the client/server certificates. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.79 |
ccTrapWVPNInfoccTrapWVPNInfo Trap.
This trap is sent when there are any client/server
configuration changes or connection establishments. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.80 |
ccTrapInfoRadiusAcctInfoccTrapInfoRadiusAcct: This trap is not supported. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.81 |
ccInfoRadiusServerThis trap is sent when ccRadiusServer
is enabled/disabled or it's configuration
changes are saved. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.82 |
configChangeUpdateA trap for every configuration change happening
in the switch. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.83 |
tunnelStatusChangedThis trap is sent whenever there is a Tuneel Status Change NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.84 |
tunnelUnknownProtocolThis trap is sent whenever there is a non Ip packet received on Tunnel NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.85 |
ccSumStatsApA summary statistic has crossed the prescribed threshold
by a Portal.
Example:
Threshold #%s1 of value %s2 (units:%s3) has been crossed
by Portal index=%s4 with MAC=%s5. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.86 |
ccSumStatsMuA summary statistic has crossed the prescribed threshold
by an MU.
Example:
Threshold '%s1' of value %s2 (units:%s3) has been crossed
by MU MAC=%s4 with IP-addr=%s5. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.87 |
ccSumStatsWlanA summary statistic has crossed the prescribed threshold
by a WLAN.
Example:
Threshold #%s1 of value %s2 (units:%s3) has been crossed
by WLAN index=%s4 with name=%s5. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.88 |
ccSumStatsSwitchA summary statistic has crossed the prescribed threshold
by the entire Switch.
Example:
Threshold %s1 of value %s2 (units:%s3) has been crossed
by the entire switch. NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.89 |
sensorConvertEnable(1)/Disable(2) this trap.
This trap is sent when AP is converted to sensor NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.90 |
sensorRevertEnable(1)/Disable(2) this trap.
This trap is sent when Sensor is reverted back to AP NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.91 |
sensorFailureEnable(1)/Disable(2) this trap.
This trap is sent when Failed to communicate to a sensor NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.92 |
sensorOfflineEnable(1)/Disable(2) this trap.
This trap is sent when Sensor is no longer responding to ping NOTIFICATION-TYPE .1.3.6.1.4.1.388.6.5.3.93 |
symbolCCNewInV1dot2dot5 OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.6 |
ccIdentfication OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.6.1 |
ccIdHwVersionThe same text that follows 'HW=' in sysDescr, EXCLUDING the
'HW='.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.1 |
ccIdFwVersionThe same text that follows 'FW=' in sysDescr, EXCLUDING the
'FW='. (The bootcode version).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.2 |
ccIdSwVersionThe same text that follows 'SW=' in sysDescr, EXCLUDING the
'SW='.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.3 |
ccIdMibVersionThe same text that follows 'MIB=' in sysDescr, EXCLUDING the
'MIB='.
The MIB version is identified by a two-digit number and a
single letter. For example, '07a'.
The number is incremented when the MIB changes in any
substantive way; (any way that a person with a MIB browser
could tell a device implementing one version from another
device at a different MIB level). The letter is incremented
when only undetectable changes are made, such as changes to
comments or descriptions.
A given version of network management software will accurately
manage all device versions that have the same numeric MIB
version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.4 |
ccIdCliVersionThe same text that follows 'CLI=' in sysDescr, EXCLUDING the
'CLI='.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.5 |
ccIdXmlVersionVersion of XML template implemented on this switch. (Much
like MIB version - read details there).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.6 |
ccIdSerialNumberThe serial number of the switch. This value is unique for each
instance of a given switch type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.7 |
ccIdSwBuildDateThe date & time the software was built; (corresponding to
'ccIdSwVersion' - there is no corresponding value for
'ccIdFwVersion').
The format of this data is not specified, (and so net mgmt
software cannot assume how to parse date, month, year, hour,
etc).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.8 |
ccIdSwBuildInfoAdditional information about the particular build of the
software running on the switch; (corresponding to
'ccIdSwVersion' - there is no corresponding value for
'ccIdFwVersion').
(No format for the characters in this DisplayString is
specified).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.9 |
ccIdProductFamilyDescribes the product family.
For all Butterfly implementations, this will be 'WS5000'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.10 |
ccIdProductModelDescribes the product model.
For Butterfly, this will be '5000' or '5100'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.1.11 |
ccHwSensors OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.6.2 |
ccHwSensorsResetSet to TRUE to reset the max values seen so far.rw DoActionNow .1.3.6.1.4.1.388.6.6.2.1 |
ccHwSensorsTableA table of fan and temp sensors for this switch.
(A table was used rather than a collection of scalars, so
that one table could describe numerous different
configurations of different numbers/types of fan and temp
sensors on different types of switches). SEQUENCE OF CcHwSensorsEntry .1.3.6.1.4.1.388.6.6.2.2 |
ccHwSensorsEntry CcHwSensorsEntry .1.3.6.1.4.1.388.6.6.2.2.1 |
ccHwSensorsIndexSimple index.ro INTEGER .1.3.6.1.4.1.388.6.6.2.2.1.1 |
ccHwSensorsTypeTells the type of the fan or temp sensor, and the
corresponding units for the readings.
Note that any given temp sensors appears in this table only
once; (NOT twice - once for deg-F and once for deg-C).
The choice of implementing a temp sensor as deg-F or deg-C
is left to the convenience of the switch developer.ro Enumeration .1.3.6.1.4.1.388.6.6.2.2.1.2 |
ccHwSensorsDescrA short, text description of the sensor.
For example:
'system fan'
'CPU fan/blower'
'CPU temperature'
'ambient temperature - near CPU'
'ambient temperature - system'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.2.2.1.3 |
ccHwSensorsCurrentReadingThe current, live reading for that sensor.
For sensors of type onOffFanInDutyCycle, this value will be
0 if the fan is currently not running, and 1 if the fan is
running.ro Integer32 .1.3.6.1.4.1.388.6.6.2.2.1.4 |
ccHwSensorsMinimumThe minimum reading observed since system reboot, (or since
the fan/temp readings were reset).
For sensors of type onOffFanInDutyCycle, this value will be
the minimum 'duty' cycle of the fan, (ranging 0..100). The
time interval over which the duty cycle is calculated is up
to the switch, but shall be long enough as to provide a
meaningful result.ro Gauge32 .1.3.6.1.4.1.388.6.6.2.2.1.5 |
ccHwSensorsMaximumThe maximum observed since system reboot, (or since
the fan/temp readings were reset).
For sensors of type onOffFanInDutyCycle, this value will be
the maximum 'duty' cycle of the fan, (ranging 0..100). The
time interval over which the duty cycle is calculated is up
to the switch, but shall be long enough as to provide a
meaningful result.ro Gauge32 .1.3.6.1.4.1.388.6.6.2.2.1.6 |
ccHwSensorsNotifyIfAboveWhen the given sensor's reading exceeds this threshold, a
notification is generated.
If no notifications are desired for this sensor, set this
threshold to 0.
(No corresponding _NotifyIfBelow has been provided, as such
a function is not anticipated to be useful. We don't
forsee low temps or infrequently/slowly operating fans to
be interesting events to send notifications on).
(Note that the corresponding notification is NOT defined
here since such notifications are defined in the ccFault
group).
The WS5100 switch does NOT support any thresholds on fans.
(It is retained here in expectation that other platforms
will allow such thresholds). If this value is SET on a
WS5000, (for a row that represents a fan), a SET-FAILED,
(bad value) will be returned.rw Integer32 .1.3.6.1.4.1.388.6.6.2.2.1.7 |
ccSsh OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.6.3 |
ccSshEnabledSet to TRUE to enable SSH access to switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.6.3.1 |
ccSshProtocolVersionThe version of SSH to use in communicating with the
switch.rw Enumeration .1.3.6.1.4.1.388.6.6.3.2 |
ccSshPortPort number to use in talking SSH to the switch.
Factory-default value is 22.The valid ranges are
1025-65535, 22.rw Integer32 .1.3.6.1.4.1.388.6.6.3.3 |
ccSshAuthenticationTimeoutIf the SSH user has not been re-authenticated
within this period of time, the connection will be
dropped.rodeprecated Integer32 UNITS "seconds" .1.3.6.1.4.1.388.6.6.3.4 |
ccSshInactivityTimeoutIf there has been no activity on the connection for
this period of time, the connection will be dropped.
Factory-default value is 5min.rodeprecated Integer32 UNITS "minutes" .1.3.6.1.4.1.388.6.6.3.5 |
ccAccessMethods OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.6.4 |
ccAccessMethodsPermittedA BITs value that indicates which management methods are
currently permitted to the switch.rwdeprecated Bits .1.3.6.1.4.1.388.6.6.4.1 |
ccV1dot2dot5Groups OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.6.1000 |
ccModuleIdDescription. MODULE-IDENTITY .1.3.6.1.4.1.388.6.6.1000.1 |
ccRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9 |
ccRadius OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.1 |
ccRadiusDataSourceDescription.rw Enumeration .1.3.6.1.4.1.388.6.9.1.1 |
ccRadiusDefaultEapTypeDescription.
Deafult EAP type advertised by the radius server.rw Enumeration .1.3.6.1.4.1.388.6.9.1.2 |
ccRadiusAuthTypePeapDescription.
Type of EAP type within PEAPrw Enumeration .1.3.6.1.4.1.388.6.9.1.3 |
ccRadiusAuthTypeTtlsDescription.
Type of EAP type within TTLSrw Enumeration .1.3.6.1.4.1.388.6.9.1.4 |
ccRadiusServerCertificateThis OID is used to import the server certificate
syntax:- /image/<server certificate file name>
or
<file path>/<server certificate file name>
Note:- user can copy the certificates from a ftp server
using ccFtp OID in ccImageDload Table which copies
the downloaded file in /image directory
Before importing server certificate user has to set
the Private key password (OID;- ccRadiusEapPasswd)
which was given while genrating the server certificate
If no password is used to genrate the certificate then no
need to set the Private key passwordrw DisplayString .1.3.6.1.4.1.388.6.9.1.5 |
ccRadiusCACertificateThis OID is used to import the CA certificate
syntax:- /image/<CA certificate file name>
or
<file path>/<CA certificate file name>
Note:- user can copy the certificates from a ftp server
using ccFtp OID in ccImageDload Table which copies
the downloaded file in /image directoryrw DisplayString .1.3.6.1.4.1.388.6.9.1.6 |
ccRadiusClientAuthTableDescription. SEQUENCE OF CcRadiusClientAuthEntry .1.3.6.1.4.1.388.6.9.1.7 |
ccRadiusClientAuthEntryDescription. CcRadiusClientAuthEntry .1.3.6.1.4.1.388.6.9.1.7.1 |
ccRadiusClientAuthIndexThis table(ccRadiusClientAuthTable) is indexed by the
radius client name.Therefore this OID contains the Client Name.
When this table is created, the client name has to be specified
here.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.9.1.7.1.1 |
ccRadiusClientAuthIpAddrThe client IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.9.1.7.1.2 |
ccRadiusClientAuthMaskMask of the client's IP addressrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.9.1.7.1.3 |
ccRadiusClientAuthSharedSecretShared secret between the client and the radius serverrw DisplayString .1.3.6.1.4.1.388.6.9.1.7.1.4 |
ccRadiusClientAuthRowStatusCreate/destroy a Rowrw AbbrevRowStatus .1.3.6.1.4.1.388.6.9.1.7.1.5 |
ccRadiusServerEnableEnable(1) or disable(2) the radius server.
Note:Before enabling or disabling radius server
save the radius server status to make
effect of the modifications done
Enabling the radius server may fail
if certificates are not imported or
Private key password set does not match
certificates or no radius client is
added. Use ccRadiusEapPasswd to set
Private key passwordrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.9.1.8 |
ccRadiusSaveStatusSave the configuration info for the radius server.
You can only enable (1) this OID.
Disable(2) is not a valid input.This OID is SET only.rw INTEGER .1.3.6.1.4.1.388.6.9.1.9 |
ccRadiusEapPasswdEnter the Private Key Password for Eap which was used to
generate the certificates.rw OCTET STRING .1.3.6.1.4.1.388.6.9.1.10 |
ccRadiusProxy OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.2 |
ccRadiusProxyRetryCountDescription.
Number of retries for sending messages to a proxyrw INTEGER .1.3.6.1.4.1.388.6.9.2.1 |
ccRadiusProxyTimeoutDescription.
Timeout in seconds before retrying to a proxyrw INTEGER .1.3.6.1.4.1.388.6.9.2.2 |
ccRadiusProxyServerTableDescription. SEQUENCE OF CcRadiusProxyServerEntry .1.3.6.1.4.1.388.6.9.2.3 |
ccRadiusProxyServerEntryDescription. CcRadiusProxyServerEntry .1.3.6.1.4.1.388.6.9.2.3.1 |
ccRadiusProxyServerIndexDescription.
A get operation on this OID displays the Proxy
Server Name.
This table is indexed by this name hence user
has to give the Proxy server name as input to
this OID.rw DisplayString .1.3.6.1.4.1.388.6.9.2.3.1.1 |
ccRadiusProxyServerPrefixOrSuffixDescription.
Prefix of suffix used for proxying radius request to a
proxy server
Note:The value of this OID has to be unique
among existing proxy server.If the row creation gives
commit fail while creation of a row then the suffix
given as input for new row creation may be existing
in some other row also.rw DisplayString .1.3.6.1.4.1.388.6.9.2.3.1.2 |
ccRadiusProxyServerIpDescription.
IP address of the proxy serverrw IpAddress .1.3.6.1.4.1.388.6.9.2.3.1.3 |
ccRadiusProxyServerPortDescription.
Port of proxy serverrw Integer32 .1.3.6.1.4.1.388.6.9.2.3.1.4 |
ccRadiusProxyServerSharedSecretDescription.
Shared secret between radius server and proxy serverrw DisplayString .1.3.6.1.4.1.388.6.9.2.3.1.5 |
ccRadiusProxyServerRowStatusDescription.
statusrw AbbrevRowStatus .1.3.6.1.4.1.388.6.9.2.3.1.6 |
ccRadiusLdap OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.3 |
ccRadiusLdap1Server OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.3.1 |
ccRadiusLdap1ServerIpIP address of the LDAP serverrw IpAddress .1.3.6.1.4.1.388.6.9.3.1.1 |
ccRadiusLdap1ServerPortPort of the LDAP serverrw INTEGER .1.3.6.1.4.1.388.6.9.3.1.2 |
ccRadiusLdap1LoginAttributeName of the login attribute used by LDAP for
authenticating the user.rw DisplayString .1.3.6.1.4.1.388.6.9.3.1.3 |
ccRadiusLdap1PasswordAttributePassword attribute used by LDAP for authenticating the user.
The maximum length for the password is 64 chars.rw Password .1.3.6.1.4.1.388.6.9.3.1.4 |
ccRadiusLdap1BindDistinguishedNameBind DN used the LDAP client on the WS5000 to connect to
a LDAP serverrw DisplayString .1.3.6.1.4.1.388.6.9.3.1.5 |
ccRadiusLdap1BindDistinguishedPasswordBind password used the LDAP client on the WS5000
to connect to a LDAP server.
The maximum length for the password is 32 chars.rw Password .1.3.6.1.4.1.388.6.9.3.1.6 |
ccRadiusLdap1BaseDistinguishedNameLDAP1 Distinguished Name.rw DisplayString .1.3.6.1.4.1.388.6.9.3.1.7 |
ccRadiusLdap1GroupAttributeName of the group attribute used by LDAP for
retrieving the group associated with a user.rw DisplayString .1.3.6.1.4.1.388.6.9.3.1.8 |
ccRadiusLdap1GroupFilterFilter specification used by the LDAP client to retrieve
the groups associated with a user.The maximum of 256
characters can be in the input for GroupFilter.rw DisplayString .1.3.6.1.4.1.388.6.9.3.1.9 |
ccRadiusLdap1GroupMembershipAttributeName of the attribute in the user schema
which specifies groups associated with
the user. This is used if the group filter
specified by ccRadiusGroupFilter return
an error.rw DisplayString .1.3.6.1.4.1.388.6.9.3.1.10 |
ccRadiusLdap2Server OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.3.2 |
ccRadiusLdap2ServerIpLDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.9.3.2.1 |
ccRadiusLdap2ServerPortPort of the LDAP server2.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw INTEGER .1.3.6.1.4.1.388.6.9.3.2.2 |
ccRadiusLdap2LoginAttributeName of the login attribute used by LDAP for
authenticating the user.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString .1.3.6.1.4.1.388.6.9.3.2.3 |
ccRadiusLdap2PasswordATtributeName of the login attribute used by LDAP for
authenticating the user.
The maximum length for the password is 64.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw Password .1.3.6.1.4.1.388.6.9.3.2.4 |
ccRadiusLdap2BindDistinguishedNameBind DN used the LDAP client on the WS5000
to connect to a LDAP server.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString .1.3.6.1.4.1.388.6.9.3.2.5 |
ccRadiusLdap2BindDistinguishedPasswordBind password used the LDAP client on the
WS5000 to connect to a LDAP server.
The maximum length for the password is 32.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw Password .1.3.6.1.4.1.388.6.9.3.2.6 |
ccRadiusLdap2BaseDistinguishedNameLDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString .1.3.6.1.4.1.388.6.9.3.2.7 |
ccRadiusLdap2GroupAttributeName of the group attribute used by LDAP for retrieving the
group associated with a user.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString .1.3.6.1.4.1.388.6.9.3.2.8 |
ccRadiusLdap2GroupFilterFilter specification used by the LDAP client to retrieve
the groups associated with a user.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString .1.3.6.1.4.1.388.6.9.3.2.9 |
ccRadiusLdap2GroupMembershipAttributeName of the attribute in the user schema
which specifies groups associated with
the user. This is used if the group
filter specified by ccRadiusGroupFilter
return an error.
LDAP2 is not supported at present.Hence this OID
will not support any fuctionality.rw DisplayString .1.3.6.1.4.1.388.6.9.3.2.10 |
ccRadiusUsers OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.4 |
ccRadiusGroupsTableDescription. SEQUENCE OF CcRadiusGroupsEntry .1.3.6.1.4.1.388.6.9.4.1 |
ccRadiusGroupsEntryDescription. CcRadiusGroupsEntry .1.3.6.1.4.1.388.6.9.4.1.1 |
ccRadiusGroupDescription.
Name of the grouprw DisplayString .1.3.6.1.4.1.388.6.9.4.1.1.1 |
ccRadiusGroupRowStatusRow status shows the existence of the particular group.
The valid input is 4 for Row creation and 6 for deletion
of an existing row.rw AbbrevRowStatus .1.3.6.1.4.1.388.6.9.4.1.1.2 |
ccRadiusUsersTableDescription. SEQUENCE OF CcRadiusUsersEntry .1.3.6.1.4.1.388.6.9.4.2 |
ccRadiusUsersEntryDescription. CcRadiusUsersEntry .1.3.6.1.4.1.388.6.9.4.2.1 |
ccRadiusUsersIdThis OID is used to add a user. The user name can not be
greater 64 charactersrw DisplayString .1.3.6.1.4.1.388.6.9.4.2.1.1 |
ccRadiusUsersPasswordSet the password for the created UserID
Note:User can also reset the password after the
creation of the UserID.rw Password .1.3.6.1.4.1.388.6.9.4.2.1.2 |
ccRadiusUsersGroupsrw Bits .1.3.6.1.4.1.388.6.9.4.2.1.3 |
ccRadiusUsersRowStatusDescription.rw AbbrevRowStatus .1.3.6.1.4.1.388.6.9.4.2.1.4 |
ccRadiusAccess OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.5 |
ccRadiusAccessTableDescription. SEQUENCE OF CcRadiusAccessEntry .1.3.6.1.4.1.388.6.9.5.1 |
ccRadiusAccessEntryDescription. CcRadiusAccessEntry .1.3.6.1.4.1.388.6.9.5.1.1 |
ccRadiusAccessGroupIdDisplays the GroupId for which coressponding
WLAN mapping is being dispalyed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.9.5.1.1.1 |
ccRadiusAccessWlanPtrsrw Bits .1.3.6.1.4.1.388.6.9.5.1.1.2 |
ccRadiusAcct OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.6 |
ccRadiusAcctIPAddressDescription.rw IpAddress .1.3.6.1.4.1.388.6.9.6.1 |
ccRadiusAcctPortDescription.rw INTEGER .1.3.6.1.4.1.388.6.9.6.2 |
ccRadiusAcctTimeoutDescription.rw INTEGER .1.3.6.1.4.1.388.6.9.6.3 |
ccRadiusAcctMaxRetryDescription.rw Integer32 .1.3.6.1.4.1.388.6.9.6.4 |
ccRadiusAcctSharedSecretDescription.rw OCTET STRING .1.3.6.1.4.1.388.6.9.6.5 |
ccRadiusTimeRestriction OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.9.8 |
ccRadiusTimeRestrictionTableA table for Radius Time Restrictions. SEQUENCE OF CcRadiusTimeRestrictionEntry .1.3.6.1.4.1.388.6.9.8.1 |
ccRadiusTimeRestrictionEntryDescription. CcRadiusTimeRestrictionEntry .1.3.6.1.4.1.388.6.9.8.1.1 |
ccRadiusTimeRestrictionStartRadius Time Restriction's Start timerw DisplayString .1.3.6.1.4.1.388.6.9.8.1.1.1 |
ccRadiusTimeRestrictionEndRadius Time Restriction's End timerw DisplayString .1.3.6.1.4.1.388.6.9.8.1.1.2 |
ccRadiusTimeRestrictionDaysRadius Time Restriction in Days.
Valid values are:
Sa, Su, Mo, Tu, We, Th, Fr, All, Wk(weekdays).
These values are Case sensitive.rw DisplayString .1.3.6.1.4.1.388.6.9.8.1.1.3 |
ccRap OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10 |
ccRapControl OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.1 |
ccRapControlPollSymbolMus OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.1.1 |
ccRapPollSymbolMusEnableDescription.
Enable/disable polling MUs for their lists of known
APs.
The state of this variable persists across reboots.
The factory-default state is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.1.1.1 |
ccRapPollSymbolMusIntervalDescription.
Amount of time to wait before polling the same MU
for its known AP list again.
Assuming the MU is disrupted for 3sec when it is
polled, a value of 5min or more would interrupt MUs
less than 1% of the time.
The state of this variable persists across reboots.
The factory-default state is 20 (minutes).rw Integer32 UNITS "minutes" .1.3.6.1.4.1.388.6.10.1.1.2 |
ccRapControlOnChannel OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.1.2 |
ccRapOnChannelEnableEnable/disable polling MUs for their lists of known
APs.
The state of this variable persists across reboots.
The factory-default state is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.1.2.1 |
ccRapOnChannelIntervalDescription.
Amount of time to wait before polling the same MU
for its known AP list again.
Assuming the MU is disrupted for 3sec when it is
polled, a value of 5min or more would interrupt MUs
less than 1% of the time.
The state of this variable persists across reboots.
The factory-default state is 40 (minutes).rw Integer32 UNITS "minutes" .1.3.6.1.4.1.388.6.10.1.2.2 |
ccRapControlDetectors OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.1.3 |
ccRapDetectorsEnableEnable/disable the entire 'detector' sub-system.
On the true-to-false transition, any portals
previously claimed as listeners will be released
and reset. Once reset, they will appear to the
switch as if just newly installed, (and thus
may or may not be adopted depending on settings
in the switch).
The state of this variable persists across reboots.
The factory-default state is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.1.3.1 |
ccRapDetectorsIntervalDescription.
Amount of time to wait before polling the same MU
for its known AP list again.
Assuming the MU is disrupted for 3sec when it is
polled, a value of 5min or more would interrupt MUs
less than 1% of the time.
The state of this variable persists across reboots.
The factory-default state is 60 (minutes).rw Integer32 UNITS "minutes" .1.3.6.1.4.1.388.6.10.1.3.2 |
ccRapAuth OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.2 |
ccRapAuthList OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.2.1 |
ccRapAuthAllSymbolMacDescription.
If TRUE, any newly-discovered AP that has a MAC address
with a Symbol vendor prefix is authorized, regardless
of the ESSID.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.2.1.1 |
ccRapAuthTableDescription. SEQUENCE OF CcRapAuthEntry .1.3.6.1.4.1.388.6.10.2.1.2 |
ccRapAuthEntryDescription. CcRapAuthEntry .1.3.6.1.4.1.388.6.10.2.1.2.1 |
ccRapAuthIndexDescription.
Indexro Unsigned32 .1.3.6.1.4.1.388.6.10.2.1.2.1.1 |
ccRapAuthMacFilterDescription.
MAC address of AP to consider 'authorized'.
To specify the entire MAC address as a wildcard,
(match any MAC address), use FF:FF:FF:FF:FF:FF.
(While it had been considered, it is NOT possible to
wildcard just the vendor portion of the MAC).
An individual SET is not supported. Created only thru'
a row create.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.2.1.2.1.2 |
ccRapAuthEssidFilterDescription.
ESSID of AP to consider 'authorized'.
Set to 33 '*' characters for wildcard, (to match
any ESSID). (ESSIDs must be 32ch or less).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.2.1.2.1.3 |
ccRapAuthRowExistsDescription.
A kludge to avoid RowStatus and save development
time.
Set this value to true when creating the row. Set
this value to false to destroy the row.
??- better name.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.2.1.2.1.4 |
ccRapAuthEraseSetting this value to TRUE erases all AuthTable entries.rw DoActionNow .1.3.6.1.4.1.388.6.10.2.1.3 |
ccRapAuthCopyAllApprovedCauses all ccRapResultsApprovedTable entries to be
immediately copied to the ccRapAuthTable.rw DoActionNow .1.3.6.1.4.1.388.6.10.2.1.4 |
ccRapAuthCopyAllRogueDescription.rw DoActionNow .1.3.6.1.4.1.388.6.10.2.1.5 |
ccRapResults OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.3 |
ccRapResultsApproved OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.3.1 |
ccRapResultsApprovedAgeOutDescription.
If an entry in the _ResultsApproved table is not heard
by any means for this number of minutes, is elligable
to be removed from the table by the switch; (the
switch, however, might not remove the entry until
it gets around to it).
A value of 0 indicates that entries will never be
'aged-out' of the table.
The state of this variable persists across reboots.
The factory-default state is 1 week, (10080 min).rw Integer32 UNITS "minutes" .1.3.6.1.4.1.388.6.10.3.1.1 |
ccRapResultsApprovedTableDescription. SEQUENCE OF CcRapResultsApprovedEntry .1.3.6.1.4.1.388.6.10.3.1.2 |
ccRapResultsApprovedEntryDescription. CcRapResultsApprovedEntry .1.3.6.1.4.1.388.6.10.3.1.2.1 |
ccRapResultsApprovedIndexDescription.ro Unsigned32 .1.3.6.1.4.1.388.6.10.3.1.2.1.1 |
ccRapResultsApprovedApMacDescription.
MAC address of the heard AP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.1.2.1.2 |
ccRapResultsApprovedEssidDescription.
ESSID of the heard APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.1.2.1.3 |
ccRapResultsApprovedCopyToAuthTableDescription.
When set to TRUE, this entry is copied to the RuleTable.rw DoActionNow .1.3.6.1.4.1.388.6.10.3.1.2.1.4 |
ccRapResultsApprovedFirstHeardDescription.
Snapshot of sysUpTime the first time this AP
MAC/ESSID combination was heard by any Symbol MU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.1.2.1.5 |
ccRapResultsApprovedLastHeardDescription.
Snapshot of sysUpTime the most recent time this AP
MAC/ESSID combination was heard by any Symbol MU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.1.2.1.6 |
ccRapResultsApprovedPortalPtrDescription.
A mask of Portal table entries. Those Portal
entries indicated by a '1' in this mask were at one
time the servicing Portal for an MU that reported
hearing this AP.
For a rogue of limited range in the parking lot on
the north side of a store, it would be expected that
only the Portals located in the north end of the
store would be indicated by this mask, thus giving
a rough indication of general direction of the
rogue.
This is currently not-supported.ro MultiPointer255 .1.3.6.1.4.1.388.6.10.3.1.2.1.7 |
ccRapResultsApprovedHowFoundDescription.
Describes the status of this AP.
??- I don't think we would report adoptedAp on the
results table, so don't need this enum value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.1.2.1.8 |
ccRapResultsApprovedHowAuthDescription.
Describes how this AP was authorized, (or not).
The order in which the various methods of authorizing APs
is attempted is exactly the numerical order of the enums.
??- I deleted adoptedAp, since it seems to me that there
is no good reason to report APs that this switch has
adopted.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.1.2.1.9 |
ccRapResultsApprovedRowEraseSet this to 1 to erase this row. In Idle state it returns 2.rw DoActionNow .1.3.6.1.4.1.388.6.10.3.1.2.1.10 |
ccRapResultsApprovedEraseDescription.
Setting this value to TRUE erases all Results entries.
Any APs heard after that event will be treated as newly
heard; (which means they will also generate notifications,
if enabled).
??- need 2nd scalar.rw DoActionNow .1.3.6.1.4.1.388.6.10.3.1.3 |
ccRapResultsRogue OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.10.3.2 |
ccRapResultsRogueAgeOutDescription.
If an entry in the _ResultsRogue table is not heard
by any means for this number of minutes, is elligable
to be removed from the table by the switch; (the
switch, however, might not remove the entry until
it gets around to it).
A value of 0 indicates that entries will never be
'aged-out' of the table.
The state of this variable persists across reboots.
The factory-default state is 1 week, (10080 min).rw Integer32 UNITS "minutes" .1.3.6.1.4.1.388.6.10.3.2.1 |
ccRapResultsRogueTableDescription. SEQUENCE OF CcRapResultsRogueEntry .1.3.6.1.4.1.388.6.10.3.2.2 |
ccRapResultsRogueEntryDescription. CcRapResultsRogueEntry .1.3.6.1.4.1.388.6.10.3.2.2.1 |
ccRapResultsRogueIndexDescription.ro Unsigned32 .1.3.6.1.4.1.388.6.10.3.2.2.1.1 |
ccRapResultsRogueApMacDescription.
MAC address of the heard APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.2.2.1.2 |
ccRapResultsRogueEssidDescription.
ESSID of the heard APro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.2.2.1.3 |
ccRapResultsRogueCopyToAuthTableDescription.
When set to TRUE, this entry is copied to the RuleTable.rw DoActionNow .1.3.6.1.4.1.388.6.10.3.2.2.1.4 |
ccRapResultsRogueFirstHeardDescription.
Snapshot of sysUpTime the first time this AP
MAC/ESSID combination was heard by any Symbol MU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.2.2.1.5 |
ccRapResultsRogueLastHeardDescription.
Snapshot of sysUpTime the most recent time this AP
MAC/ESSID combination was heard by any Symbol MU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.2.2.1.6 |
ccRapResultsRoguePortalPtrDescription.
A mask of Portal table entries. Those Portal
entries indicated by a '1' in this mask were at one
time the servicing Portal for an MU that reported
hearing this AP.
For a rogue of limited range in the parking lot on
the north side of a store, it would be expected that
only the Portals located in the north end of the
store would be indicated by this mask, thus giving
a rough indication of general direction of the
rogue.
This is currently not supported.ro MultiPointer255 .1.3.6.1.4.1.388.6.10.3.2.2.1.7 |
ccRapResultsRogueHowFoundDescription.
Describes the status of this AP.
??- I don't think we would report adoptedAp on the
results table, so don't need this enum value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.2.2.1.8 |
ccRapResultsRogueClosestPortalPtrA pointer to closest reporting Portal to the Rogue AP,
(where 'closest' is defined as greatest RSSI value
among all Portals reporting this AP).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.10.3.2.2.1.9 |
ccRapResultsRogueClosestPortalRssiDescription.
RSSI reported by the closest Portal.ro Integer32 .1.3.6.1.4.1.388.6.10.3.2.2.1.10 |
ccRapResultsRogueEraseDescription.
Setting this value to TRUE erases all Results entries.
Any APs heard after that event will be treated as newly
heard; (which means they will also generate notifications,
if enabled).
??- need 2nd scalar.rw DoActionNow .1.3.6.1.4.1.388.6.10.3.2.3 |
ccImageDload OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.11 |
ccRestoreRestore a new system image, a new configuration or a standby configuration on the switch.
The syntax is :
<system/config/standby>,<filename>
system: Restore system image. The corresponding <filename> should be a image file.
config: Restore a new configuration. the corresponding <filename> should be a .cfg file.
standby: Restore a standby configuration.
A GET on this oid will give the current status of the SET operation.
The restore operation may take upto 10 minutes and hence the manager may not
be able to contact the switch during this process.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.11.1 |
ccFtpFTP an image file, configuration file to the switch from an external server
on a SET operation.
The files will be transferred to the default directory in the switch ie /image.
Syntax:
<FtpServer IPAddr>,<username>,<password>,<directory path>,<filename>
The time taken to finish the file transfer will depend on the
size of the file.
A GET on this OID will show the previous status for this operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.11.2 |
ccTftpTransfer files thru' tftp on a SET operation.
TFTP a image file, configuration file to the switch from an external server.
The files will be transferred to the default directory in the switch ie /image.
Syntax:
<TftpServer IPAddr>,<filename>
Files will be picked-up from the default /tftpboot directory or
from the directory configured by the tftp server.
A GET will show the previous status of this operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.11.3 |
ccListFilesDo a GET to list all the files present in the /image directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.11.4 |
ccDeleteFilesA SET will delete files in the /image directory.
Syntax: <filename>
See ccListFiles to see a list of files in /image directory.
A GET will return the status of the previous operation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.11.5 |
ccRFStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.16 |
ccAp OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.16.1 |
ccApTableDescription. SEQUENCE OF CcApEntry .1.3.6.1.4.1.388.6.16.1.1 |
ccApEntryDescription. CcApEntry .1.3.6.1.4.1.388.6.16.1.1.1 |
ccApIndexSmall, arbitrary integer indexro Integer32 .1.3.6.1.4.1.388.6.16.1.1.1.1 |
ccApNicMacMAC Address of this Access Portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.2 |
ccApModelNumberModel number of Access Portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.3 |
ccApSerialNumberSerial Number of this Access Portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.4 |
ccApPcbRevisionRevision of the printed circuit board for this Access Portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.5 |
ccApBootLoaderRevRevision of the boot loader code in this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.6 |
ccApWispVersionVersion of the WISP (AP-Switch) protocol implemented by this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.7 |
ccApRuntimeFwVersionVersion of run-time code on this Access Port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.1.1.1.8 |
ccApNumPortalsThe number of Portals implemented on this Access Port.ro Unsigned32 .1.3.6.1.4.1.388.6.16.1.1.1.9 |
ccApPointersToPortalsIf bit <n> of this value is set, this ApTable entry 'points' to entry <n> in the Portal Table.
Such a reference conveys that the Portal entry pointed-to represents a Portal contained in the Access Port
represented by this entry.
Note that since one Access Port can implement 1, 2, (and in the future possibly more), Portals,
this 'pointer' field had to be a bit-mask.ro MultiPointer255 .1.3.6.1.4.1.388.6.16.1.1.1.10 |
ccPortal OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.16.2 |
ccPortalTableThis Table gives general information about the Radio. SEQUENCE OF CcPortalEntry .1.3.6.1.4.1.388.6.16.2.1 |
ccPortalEntryDescription. CcPortalEntry .1.3.6.1.4.1.388.6.16.2.1.1 |
ccPortalIndexSmall, arbitrary integer index.ro INTEGER .1.3.6.1.4.1.388.6.16.2.1.1.1 |
ccPortalPointerToApThis value is the index in the ApTable for the
entry representing the Access Port that contains
this Radio
Since each Portal has one and only one Access Port
as 'Parent', this value is a simple integer, not a bit-mask.ro SinglePointer .1.3.6.1.4.1.388.6.16.2.1.1.2 |
ccPortalPointersToWlans(Reserved for future implementation).ro MultiPointer63 .1.3.6.1.4.1.388.6.16.2.1.1.3 |
ccPortalNameName of this Radio, as assigned by the Web UI
or CLI.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.2.1.1.4 |
ccPortalLocationLocation string for this Radio, as assigned by
the Web UI or CLIro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.2.1.1.5 |
ccPortalOptionsThis value describes the presence/absence of
internal and/or external primary and/or secondary antennas.ro Bits .1.3.6.1.4.1.388.6.16.2.1.1.6 |
ccPortalMacMAC address of the Radio.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.2.1.1.7 |
ccPortalNumberofEssThe number of ESSs implemented by this Radioro Integer32 .1.3.6.1.4.1.388.6.16.2.1.1.8 |
ccPortalNumberOfBssThe number of BSSs implemented by this Radioro Integer32 .1.3.6.1.4.1.388.6.16.2.1.1.9 |
ccPortalAssociatedMusThe number of MUs currently associated to this Radioro Integer32 .1.3.6.1.4.1.388.6.16.2.1.1.10 |
ccPortalRadioTypeRadio type of the Radioro RadioType .1.3.6.1.4.1.388.6.16.2.1.1.11 |
ccPortalChannelThe value describes the channel the Radio is currently operating on.ro Enumeration .1.3.6.1.4.1.388.6.16.2.1.1.12 |
ccPortalTxPowerLevelOutput power level for the Radioro Integer32 .1.3.6.1.4.1.388.6.16.2.1.1.13 |
ccPortalLastAdoptionA snapshot of the WS5000's sysUpTime when this Radio was last adopted.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.2.1.1.14 |
ccPortalStateThis value describes the state of the Radio
A healthy Portal would power-on, and quickly advance from
portalUpAndWaitingForConfig and then on to
portalReceivingConfig and then on to
portalUpAndAdopted.
A Portal that is denied adoption due to ACLs would show:
portalDeniedAdoptionDueToAcl.
A Portal that does not 'handshake' with the switch properly
would be found in state:
portalBroken.ro Enumeration .1.3.6.1.4.1.388.6.16.2.1.1.15 |
ccPortalBackgroundNoiseNumSamplesTotal packets received via the Radio included in
all the other countries reported in this row.ro Counter32 .1.3.6.1.4.1.388.6.16.2.1.1.16 |
ccPortalBackgroundNoiseBestThe best Signal value seen from the Radio so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value is initialized to 500dBm.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.1.1.17 |
ccPortalBackgroundNoiseWorstThe worst Signal value seen from the Radio so far.
(Remember that a -80dBm Signal is worse than -60dBm).
This value is initialized to -500dBm.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.1.1.18 |
ccPortalBackgroundNoiseSumA running sum of all Signal values calculated by the
switch (using reported RSSI values), for packets received
via this Radio.
Note that this value is normally a negative value
ranging from -10dBm to -80dBm. It is possible for this
value to be positive, but that would be rare, and would
signal an exceptionally strong signal.
(This value divided by ccPortalRxRssiNumPkts yields the average
Signal value for all packets received from this Radio).ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.1.1.19 |
ccPortalBackgroundNoiseSumSquaresA sum of the squares of each Signal value calculated
for packets received via this Radio
Unlike _SignalSum, this value is never negative, since the square
of a negative number is a positive.
(This value can be used to calculate the standard
deviation for Signal values calculated for packets
from this Radio).ro Counter64 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.1.1.20 |
ccPortalLastMacThis scalar records the MAC address of the most
recent Radio to be Adopted, UnAdopted, or Denied.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.2.2 |
ccPortalLastReasonThis value notes the reason for the most-recent
Radio UnAdoption or Denial.ro Enumeration .1.3.6.1.4.1.388.6.16.2.3 |
ccPortalSystemStatsTableThe table contains information about various management packets.
Transmitted/Receieved by a Radio SEQUENCE OF CcPortalSystemStatsEntry .1.3.6.1.4.1.388.6.16.2.5 |
ccPortalSystemStatsEntryDescription. CcPortalSystemStatsEntry .1.3.6.1.4.1.388.6.16.2.5.1 |
ccPortalSystemStatsBeaconTxThe number of Beacons sent.ro Integer32 .1.3.6.1.4.1.388.6.16.2.5.1.1 |
ccPortalSystemStatsBeaconsTxOctetsThe number of octets sent in Beacons.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.2 |
ccPortalSystemStatsProbeReqRxThe number of Probe Request packets received.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.3 |
ccPortalSystemStatsProbeReqRxOctetsThe number of octets received in Probe Request packets.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.4 |
ccPortalSystemStatsProbeRespRetriesNoneThe number of Probe Response packets sent with no retries.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.5 |
ccPortalSystemStatsProbeRespRetries1The number of Probe Response packets sent with exactly
1 retryro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.6 |
ccPortalSystemStatsProbeRespRetries2The number of Probe Response packets sent with exactly
2 retries.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.7 |
ccPortalSystemStatsProbeRespRetries3OrMoreThe number of Probe Response packets sent with exactly
3 retries or more retries.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.8 |
ccPortalSystemStatsProbeRespRetriesFailedThe number of Probe Response packets that were never
successfully transmitted because the max retry count was
reached.ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.9 |
ccPortalSystemStatsProbeRespTxOctetsThe number of octets successfully transmitted in Probe
Response packets. (For example, the octets in a Probe
Response that is transmitted twice - one retry - only counts
once in this sum).ro Unsigned32 .1.3.6.1.4.1.388.6.16.2.5.1.10 |
ccPortalRfSum OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.16.2.6 |
ccPortalStatsTableThis table describes general statistics about
packets sent/recieved via each Portal on the switch. SEQUENCE OF CcPortalStatsEntry .1.3.6.1.4.1.388.6.16.2.6.1 |
ccPortalStatsEntry CcPortalStatsEntry .1.3.6.1.4.1.388.6.16.2.6.1.1 |
ccPortalTxPktsUcastCount of unicast packets sent via the Radioro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.1 |
ccPortalRxPktsUcastCount of unicast packets received via the Radio.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.2 |
ccPortalRxPktsNUcastCount of non-unicast (broadcast & multicast)
packets received via the Radioro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.3 |
ccPortalTxOctetsUcastCount of unicast octets sent via the Radioro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.4 |
ccPortalRxOctetsUcastCount of unicast octets received via the Radioro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.5 |
ccPortalRxOctetsNUcastCount of non-unicast (broadcast & multicast)
octets received via the Radioro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.6 |
ccPortalRxUndecryptablePktsCount of packets received via the Radio that could
not be decrypted.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.1.1.7 |
ccPortalLastActivityA snapshot of the switch's sysUpTime at the time
of the last activity (packet sent or received)
via the Radioro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.2.6.1.1.8 |
ccPortalRxPktsTableFor each MU serviced by the switch, this table
describes counts of packets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). SEQUENCE OF CcPortalRxPktsEntry .1.3.6.1.4.1.388.6.16.2.6.2 |
ccPortalRxPktsEntry CcPortalRxPktsEntry .1.3.6.1.4.1.388.6.16.2.6.2.1 |
ccPortalRxPktsAt1MbNumber of pkts received via this Radio at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.1 |
ccPortalRxPktsAt2MbNumber of pkts received via this Radio at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.2 |
ccPortalRxPktsAt5pt5MbNumber of pkts received via this Radio at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.3 |
ccPortalRxPktsAt6MbNumber of pkts received via this Radio at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.4 |
ccPortalRxPktsAt9MbNumber of pkts received via this Portal at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.5 |
ccPortalRxPktsAt11MbNumber of pkts received via this Radio at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.6 |
ccPortalRxPktsAt12MbNumber of pkts received via this Radio at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.7 |
ccPortalRxPktsAt18MbNumber of pkts received via this Radio at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.8 |
ccPortalRxPktsAt22MbNumber of pkts received via this Radio at 22 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.9 |
ccPortalRxPktsAt24MbNumber of pkts received via this Radio at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.10 |
ccPortalRxPktsAt36MbNumber of pkts received via this Radio at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.11 |
ccPortalRxPktsAt48MbNumber of pkts received via this Radio at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.12 |
ccPortalRxPktsAt54MbNumber of pkts received via this Radio at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.2.1.13 |
ccPortalTxPktsTableFor each MU serviced by the switch, this table
describes counts of packets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). SEQUENCE OF CcPortalTxPktsEntry .1.3.6.1.4.1.388.6.16.2.6.3 |
ccPortalTxPktsEntry CcPortalTxPktsEntry .1.3.6.1.4.1.388.6.16.2.6.3.1 |
ccPortalTxPktsAt1MbNumber of pkts transmitted via this Radio at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.1 |
ccPortalTxPktsAt2MbNumber of pkts transmitted via this Radio at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.2 |
ccPortalTxPktsAt5pt5MbNumber of pkts transmitted via this Radio at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.3 |
ccPortalTxPktsAt6MbNumber of pkts transmitted via this Radio at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.4 |
ccPortalTxPktsAt9MbNumber of pkts transmitted via this Radio at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.5 |
ccPortalTxPktsAt11MbNumber of pkts transmitted via this Radio at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.6 |
ccPortalTxPktsAt12MbNumber of pkts transmitted via this Radio at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.7 |
ccPortalTxPktsAt18MbNumber of pkts transmitted via this Radio at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.8 |
ccPortalTxPktsAt22MbNumber of pkts transmitted via this Radio at 22 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.9 |
ccPortalTxPktsAt24MbNumber of pkts transmitted via this Radio at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.10 |
ccPortalTxPktsAt36MbNumber of pkts transmitted via this Radio at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.11 |
ccPortalTxPktsAt48MbNumber of pkts transmitted via this Radio at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.12 |
ccPortalTxPktsAt54MbNumber of pkts transmitted via this Radio at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.3.1.13 |
ccPortalRxOctetsTableFor each Portal on this switch, this table
describes counts of octets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). SEQUENCE OF CcPortalRxOctetsEntry .1.3.6.1.4.1.388.6.16.2.6.4 |
ccPortalRxOctetsEntry CcPortalRxOctetsEntry .1.3.6.1.4.1.388.6.16.2.6.4.1 |
ccPortalRxOctetsAt1MbNumber of octets received via this Radio at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.1 |
ccPortalRxOctetsAt2MbNumber of octets received via this Radio at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.2 |
ccPortalRxOctetsAt5pt5MbNumber of octets received via this Radio at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.3 |
ccPortalRxOctetsAt6MbNumber of octets received via this Radio at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.4 |
ccPortalRxOctetsAt9MbNumber of octets received via this Radio at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.5 |
ccPortalRxOctetsAt11MbNumber of octets received via this Radio at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.6 |
ccPortalRxOctetsAt12MbNumber of octets received via this Radio at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.7 |
ccPortalRxOctetsAt18MbNumber of octets received via this Radio at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.8 |
ccPortalRxOctetsAt22MbNumber of octets received via this Radio at 22 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.9 |
ccPortalRxOctetsAt24MbNumber of octets received via this Radio at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.10 |
ccPortalRxOctetsAt36MbNumber of octets received via this Radio at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.11 |
ccPortalRxOctetsAt48MbNumber of octets received via this Radio at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.12 |
ccPortalRxOctetsAt54MbNumber of octets received via this Radio at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.4.1.13 |
ccPortalTxOctetsTableFor each Portal on this switch, this table
describes counts of octets received at each
possible speed, (1Mb, 2Mb, 5.5Mb, 6Mb...). SEQUENCE OF CcPortalTxOctetsEntry .1.3.6.1.4.1.388.6.16.2.6.5 |
ccPortalTxOctetsEntry CcPortalTxOctetsEntry .1.3.6.1.4.1.388.6.16.2.6.5.1 |
ccPortalTxOctetsAt1MbNumber octets transmitted via this Radio at 1 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.1 |
ccPortalTxOctetsAt2MbNumber octets transmitted via this Radio at 2 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.2 |
ccPortalTxOctetsAt5pt5MbNumber octets transmitted via this Radio at 5.5 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.3 |
ccPortalTxOctetsAt6MbNumber octets transmitted via this Radio at 6 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.4 |
ccPortalTxOctetsAt9MbNumber octets transmitted via this Radio at 9 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.5 |
ccPortalTxOctetsAt11MbNumber octets transmitted via this Radio at 11 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.6 |
ccPortalTxOctetsAt12MbNumber octets transmitted via this Radio at 12 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.7 |
ccPortalTxOctetsAt18MbNumber octets transmitted via this Radio at 18 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.8 |
ccPortalTxOctetsAt22MbNumber octets transmitted via this Radio at 22 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.9 |
ccPortalTxOctetsAt24MbNumber octets transmitted via this Radio at 24 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.10 |
ccPortalTxOctetsAt36MbNumber octets transmitted via this Radio at 36 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.11 |
ccPortalTxOctetsAt48MbNumber octets transmitted via this Radio at 48 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.12 |
ccPortalTxOctetsAt54MbNumber octets transmitted via this Radio at 54 Mbps.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.5.1.13 |
ccPortalTxRetriesPktsTableFor each Portal on the switch, this table describes
counts of the number of octets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up). SEQUENCE OF CcPortalTxRetriesPktsEntry .1.3.6.1.4.1.388.6.16.2.6.6 |
ccPortalTxRetriesPktsEntry CcPortalTxRetriesPktsEntry .1.3.6.1.4.1.388.6.16.2.6.6.1 |
ccPortalTxRetriesPktsNoneNumber of pkts successfully transmitted via this
Radio with no retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.1 |
ccPortalTxRetriesPkts01Number of pkts successfully transmitted via this
Radio with exactly 1 retry.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.2 |
ccPortalTxRetriesPkts02Number of pkts successfully transmitted via this
Radio with exactly 2 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.3 |
ccPortalTxRetriesPkts03Number of pkts successfully transmitted via this
Radio with exactly 3 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.4 |
ccPortalTxRetriesPkts04Number of pkts successfully transmitted via this
Radio with exactly 4 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.5 |
ccPortalTxRetriesPkts05Number of pkts successfully transmitted via this
Radio with exactly 5 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.6 |
ccPortalTxRetriesPkts06Number of pkts successfully transmitted via this
Radio with exactly 6 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.7 |
ccPortalTxRetriesPkts07Number of pkts successfully transmitted via this
Radio with exactly 7 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.8 |
ccPortalTxRetriesPkts08Number of pkts successfully transmitted via this
Radio with exactly 8 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.9 |
ccPortalTxRetriesPkts09Number of pkts successfully transmitted via this
Radio with exactly 9 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.10 |
ccPortalTxRetriesPkts10Number of pkts successfully transmitted via this
Radio with exactly 10 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.11 |
ccPortalTxRetriesPkts11Number of pkts successfully transmitted via this
Radio with exactly 11 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.12 |
ccPortalTxRetriesPkts12Number of pkts successfully transmitted via this
Radio with exactly 12 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.13 |
ccPortalTxRetriesPkts13Number of pkts successfully transmitted via this
Radio with exactly 13 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.14 |
ccPortalTxRetriesPkts14Number of pkts successfully transmitted via this
Radio with exactly 14 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.15 |
ccPortalTxRetriesPkts15Number of pkts successfully transmitted via this
Radio with exactly 15 retries.rodeprecated Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.16 |
ccPortalTxRetriesPktsFailedNumber of pkts that never were successfully
transmitted to via this Portal because the max retry
count was exceeded.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.6.1.17 |
ccPortalTxRetriesOctetsTableFor each Portal on the switch, this table describes
counts of the number of octets affected by transmit
retries, (no retries, 1 retry, 2 retries,... gave-up). SEQUENCE OF CcPortalTxRetriesOctetsEntry .1.3.6.1.4.1.388.6.16.2.6.7 |
ccPortalTxRetriesOctetsEntry CcPortalTxRetriesOctetsEntry .1.3.6.1.4.1.388.6.16.2.6.7.1 |
ccPortalTxRetriesOctetsNoneNumber of octets successfully transmitted via this
Radio with no retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.1 |
ccPortalTxRetriesOctets01Number of octets successfully transmitted via this
Radio with exactly 1 retry.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.2 |
ccPortalTxRetriesOctets02Number of octets successfully transmitted via this
Radio with exactly 2 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.3 |
ccPortalTxRetriesOctets03Number of octets successfully transmitted via this
Radio with exactly 3 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.4 |
ccPortalTxRetriesOctets04Number of octets successfully transmitted via this
Radio with exactly 4 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.5 |
ccPortalTxRetriesOctets05Number of octets successfully transmitted via this
Radio with exactly 5 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.6 |
ccPortalTxRetriesOctets06Number of octets successfully transmitted via this
Radio with exactly 6 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.7 |
ccPortalTxRetriesOctets07Number of octets successfully transmitted via this
Radio with exactly 7 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.8 |
ccPortalTxRetriesOctets08Number of octets successfully transmitted via this
Radio with exactly 8 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.9 |
ccPortalTxRetriesOctets09Number of octets successfully transmitted via this
Radio with exactly 9 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.10 |
ccPortalTxRetriesOctets10Number of octets successfully transmitted via this
Radio with exactly 10 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.11 |
ccPortalTxRetriesOctets11Number of octets successfully transmitted via this
Radio with exactly 11 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.12 |
ccPortalTxRetriesOctets12Number of octets successfully transmitted via this
Radio with exactly 12 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.13 |
ccPortalTxRetriesOctets13Number of octets successfully transmitted via this
Radio with exactly 13 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.14 |
ccPortalTxRetriesOctets14Number of octets successfully transmitted via this
Radio with exactly 14 retries.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.15 |
ccPortalTxRetriesOctets15Number of octets successfully transmitted via this
Radio with exactly 15 retries.rodeprecated Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.16 |
ccPortalTxRetriesOctetsFailedNumber of octets that never were successfully
transmitted to via this Portal because the max retry
count was exceeded.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.7.1.17 |
ccPortalSigStatsTableThis table describes statistics about RSSI, Signal, Noise,
and SNR for packets recieved via each Portal on the switch. SEQUENCE OF CcPortalSigStatsEntry .1.3.6.1.4.1.388.6.16.2.6.8 |
ccPortalSigStatsEntry CcPortalSigStatsEntry .1.3.6.1.4.1.388.6.16.2.6.8.1 |
ccPortalSigStatsNumPktsTotal packets received via the Radio included in
all the other counters reported in this row.ro Counter32 .1.3.6.1.4.1.388.6.16.2.6.8.1.1 |
ccPortalSigStatsSignalBestThe best Signal value seen from the Radio so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value is initialized to -500dBm.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.2 |
ccPortalSigStatsSignalWorstThe worst Signal value seen from the Radio so far.
(Remember that a -80dBm Signal is worse than -60dBm).
This value is initialized to 500dBm.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.3 |
ccPortalSigStatsSignalSumA running sum of all Signal values calculated by the
switch (using reported RSSI values), for packets
received via this Radio
Note that this value is normally a negative value
ranging from -10dBm to -80dBm. It is possible for this
value to be positive, but that would be rare, and would
signal an exceptionally strong signal.
(This value divided by ccPortalSigStatsNumPkts yields
the average Signal value for all packets received
from this MU).ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.4 |
ccPortalSigStatsSignalSumSquaresA sum of the squares of each Signal value calculated
for packets received via this Radio
Unlike _SignalSum, this value is never negative, since
the square of a negative number is a positive.
(This value can be used to calculate the standard
deviation for Signal values calculated for packets
from this Portal).ro Counter64 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.5 |
ccPortalSigStatsSignalMostRecentThe best Signal value seen from the Radio so far.
(Remember that a -20dBm Signal is better than -60dBm).
This value does not make sense when ccPortalSigStatsNumPkts
equals to 0.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.6 |
ccPortalSigStatsNoiseBestThe best Noise value seen from the Radio so far.
(Remember that -80dBm Noise is better than -70dBm).
This value is initialized to 500dBm.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.7 |
ccPortalSigStatsNoiseWorstThe worst Noise value seen from the Radio so far.
(Remember that -50dBm Noise is worse than -60dBm).
This value is initialized to -500dBm.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.8 |
ccPortalSigStatsNoiseSumA running sum of all Noise values calculated by the
switch (using reported RSSI values), for packets
received via this Radio
Like _SignalSum, this value is normally a negative value.
(This value divided by ccPortalSigStatsNumPkts yields
the average Noise value for all packets received
from this MU).ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.9 |
ccPortalSigStatsNoiseSumSquaresA sum of the squares of each Noise value calculated
for packets received via this Radio
As with _SignalSumSquares, this value is never negative.
(This value can be used to calculate the standard
deviation for Noise values calculated for packets
from this Portal).ro Counter64 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.10 |
ccPortalSigStatsNoiseMostRecentThe best Noise value seen from the Radio so far.
(Remember that -80dBm Noise is better than -70dBm).
This value does not make sense when ccPortalSigStatsNumPkts
equals to 0.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.8.1.11 |
ccPortalSigStatsSnrBestThe best SNR value seen from the Radio so far.
(Remember that +30dBm SNR is better than +20dBm).
This value is initialized to -500dB.ro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.8.1.12 |
ccPortalSigStatsSnrWorstThe worst SNR value seen from the Radio so far.
(Remember that +10dBm SNR is worse than +20dBm).
This value is initialized to 500dB.ro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.8.1.13 |
ccPortalSigStatsSnrSumA running sum of all SNR values calculated by the
switch (using reported RSSI values), for packets
received via this Radio
Unlike _Signal and _Noise, this value is never negative.
(This value divided by ccPortalSigStatsNumPkts yields
the average SNR value for all packets received
from this MU).ro Counter64 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.8.1.14 |
ccPortalSigStatsSnrSumSquaresA sum of the squares of each SNR value calculated
for packets received via this Radio
This value is never negative.
(This value can be used to calculate the standard
deviation for SNR values calculated for packets
from this Portal).ro Counter64 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.8.1.15 |
ccPortalSigStatsSnrMostRecentThe best SNR value seen from the Radio so far.
(Remember that +30dBm SNR is better than +20dBm).
This value does not make sense when ccPortalSigStatsNumPkts
equals to 0.ro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.8.1.16 |
ccPortalSumStatsShortTableAverages and rates calculated over the SHORT window for
each Portal. SEQUENCE OF CcPortalSumStatsShortEntry .1.3.6.1.4.1.388.6.16.2.6.9 |
ccPortalSumStatsShortEntry CcPortalSumStatsShortEntry .1.3.6.1.4.1.388.6.16.2.6.9.1 |
ccPortalSumStatsShortTimestampSnapshot of sysUpTime as of the END of the 'window' of
time that this entry of values represents.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.2.6.9.1.1 |
ccPortalSumStatsShortNumPktsThe number of packets used to calculate the statistics in
this window.ro Unsigned32 UNITS "packets" .1.3.6.1.4.1.388.6.16.2.6.9.1.2 |
ccPortalSumStatsShortPktsPerSec100Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.2.6.9.1.3 |
ccPortalSumStatsShortPktsPerSecTx100Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.2.6.9.1.4 |
ccPortalSumStatsShortPktsPerSecRx100Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.2.6.9.1.5 |
ccPortalSumStatsShortThroughputActual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.9.1.6 |
ccPortalSumStatsShortThroughputTxActual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.9.1.7 |
ccPortalSumStatsShortThroughputRxActual number of bits RX over the window,
divided by the number of seconds in the window.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.9.1.8 |
ccPortalSumStatsShortAvgBitSpeedAn octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/received.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.9.1.9 |
ccPortalSumStatsShortAvgMuSignalThe average of all signal values over the window.
NOTE: dBm are normally negative. Here the NEGATIVE values
are reported as POSITIVE values. POro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.9.1.10 |
ccPortalSumStatsShortAvgMuNoiseThe average of all noise values over the window.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.9.1.11 |
ccPortalSumStatsShortAvgMuSnrThe average of all SNR values over the window.ro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.9.1.12 |
ccPortalSumStatsShortPp10kNUcastPktsRatio of packets that were NOT unicast.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.9.1.13 |
ccPortalSumStatsShortPp10kTxWithRetriesRatio of TX packets that experienced one or more retries.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.9.1.14 |
ccPortalSumStatsShortPp10kTxMaxRetriesRatio of TX packets that were dropped due to excessive.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.9.1.15 |
ccPortalSumStatsShortTxAvgRetries100For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00).ro ScaleBy100 UNITS "average x100" .1.3.6.1.4.1.388.6.16.2.6.9.1.16 |
ccPortalSumStatsShortPp10kRxUndecryptRatio of RX packets that were undecryptable.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.9.1.17 |
ccPortalSumStatsShortTotalMusThe total number of MUs associated to the given Radioro Unsigned32 .1.3.6.1.4.1.388.6.16.2.6.9.1.18 |
ccPortalSumStatsShortPp10kRfUtilThe approximate utilization of the Portal's RF port.
Calculated as Throughput divided by AvgBitSpeed.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.9.1.19 |
ccPortalSumStatsShortPp10kDroppedPackets dropped divided by packets sent. Dropped here
means dropped intentionally due to the appropriate QoS
queue being full. Other reasons for dropped packets are
not counted in this ratio.
Calculated as an average for all WLANs implemented on
this Portal.
Expressed as parts-per-10000.ro PartsPer10k .1.3.6.1.4.1.388.6.16.2.6.9.1.20 |
ccPortalSumStatsLongTableAverages and rates calculated over the LONG window for
each Portal.
(Refer to ccPortalSumStatsShortTable for descriptions). SEQUENCE OF CcPortalSumStatsLongEntry .1.3.6.1.4.1.388.6.16.2.6.10 |
ccPortalSumStatsLongEntry CcPortalSumStatsLongEntry .1.3.6.1.4.1.388.6.16.2.6.10.1 |
ccPortalSumStatsLongTimestampSnapshot of sysUpTime as of the END of the 'window' of
time that this entry of values represents.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.2.6.10.1.1 |
ccPortalSumStatsLongNumPktsThe number of packets used to calculate the statistics in
this windowro Unsigned32 UNITS "packets" .1.3.6.1.4.1.388.6.16.2.6.10.1.2 |
ccPortalSumStatsLongPktsPerSec100Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.2.6.10.1.3 |
ccPortalSumStatsLongPktsPerSecTx100Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.2.6.10.1.4 |
ccPortalSumStatsLongPktsPerSecRx100Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.2.6.10.1.5 |
ccPortalSumStatsLongThroughputActual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries)ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.10.1.6 |
ccPortalSumStatsLongThroughputTxActual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.10.1.7 |
ccPortalSumStatsLongThroughputRxActual number of bits RX over the window,
divided by the number of seconds in the window.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.10.1.8 |
ccPortalSumStatsLongAvgBitSpeedAn octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/received.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.2.6.10.1.9 |
ccPortalSumStatsLongAvgMuSignalThe average of all signal values over the window.
NOTE: dBm are normally negative. Here the NEGATIVE values
are reported as POSITIVE values. POro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.10.1.10 |
ccPortalSumStatsLongAvgMuNoiseThe average of all noise values over the window.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.2.6.10.1.11 |
ccPortalSumStatsLongAvgMuSnrThe average of all SNR values over the window.ro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.2.6.10.1.12 |
ccPortalSumStatsLongPp10kNUcastPktsRatio of packets that were NOT unicast.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.10.1.13 |
ccPortalSumStatsLongPp10kTxWithRetriesRatio of TX packets that experienced one or more retries.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.10.1.14 |
ccPortalSumStatsLongPp10kTxMaxRetriesRatio of TX packets that were dropped due to excessive.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.10.1.15 |
ccPortalSumStatsLongTxAvgRetries100For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00)ro ScaleBy100 UNITS "average x100" .1.3.6.1.4.1.388.6.16.2.6.10.1.16 |
ccPortalSumStatsLongPp10kRxUndecryptRatio of RX packets that were undecryptable.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.10.1.17 |
ccPortalSumStatsLongTotalMusThe total number of MUs associated to the given Radioro Unsigned32 .1.3.6.1.4.1.388.6.16.2.6.10.1.18 |
ccPortalSumStatsLongPp10kRfUtilThe approximate utilization of the Portal's RF port.
Calculated as Throughput divided by AvgBitSpeed.
Expressed as parts-per-10000.ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.2.6.10.1.19 |
ccPortalSumStatsLongPp10kDroppedPackets dropped divided by packets sent. Dropped here
means dropped intentionally due to the appropriate QoS
queue being full. Other reasons for dropped packets are
not counted in this ratio.
Calculated as an average for all WLANs implemented on
this Portal.
Expressed as parts-per-10000.ro PartsPer10k .1.3.6.1.4.1.388.6.16.2.6.10.1.20 |
ccMus OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.16.3 |
ccMuInfoTableThis table describes general information about
each MU serviced by the switch. SEQUENCE OF CcMuInfoEntry .1.3.6.1.4.1.388.6.16.3.1 |
ccMuInfoEntry CcMuInfoEntry .1.3.6.1.4.1.388.6.16.3.1.1 |
ccMuMacMAC address of the MU.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.1.1.1 |
ccMuWlanIndex(Reserved for future implementation).ro Integer32 .1.3.6.1.4.1.388.6.16.3.1.1.2 |
ccMuWlanNameThe name of the WLAN this MU is associated to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.1.1.3 |
ccMuIsDataReadyThis value is true if the WS5000 is ready to
forward/switch packets to/from this MU,
(internally called the 'data ready' state).
Otherwise this value is false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.1.1.4 |
ccMuPortalIndexThe index of the entry in the PortalTable to
which this MU is associated.ro Integer32 .1.3.6.1.4.1.388.6.16.3.1.1.5 |
ccMuPortalMacThe MAC address of the Portal to which this MU is
associated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.1.1.6 |
ccMuSymbolRogueApEnaIf true, this MU supports Symbol's Rogue AP
detection assist algorithm.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.1.1.7 |
ccMuIpAddrIP address of the MU.ro IpAddress .1.3.6.1.4.1.388.6.16.3.1.1.8 |
ccMuTypeType of the MU.ro Enumeration .1.3.6.1.4.1.388.6.16.3.1.1.9 |
ccMuRadioTypeRadio type of the MU.ro RadioType .1.3.6.1.4.1.388.6.16.3.1.1.10 |
ccMuSupportedRatesA bit-mask of rates supported by this MU.ro Bits .1.3.6.1.4.1.388.6.16.3.1.1.11 |
ccMuPowerModePower-mode implemented by the MU.
A MU's status will constantly switch between PSP and
CAM mode when it is in PSP mode.ro Enumeration .1.3.6.1.4.1.388.6.16.3.1.1.12 |
ccMuAuthenticationMethodAuthentication method implemented by the MU.ro Enumeration .1.3.6.1.4.1.388.6.16.3.1.1.13 |
ccMuEncryptionMethodEncryption method implemented by the MU.ro Enumeration .1.3.6.1.4.1.388.6.16.3.1.1.14 |
ccMuVlanIdThe VLAN that this MU is assigned to.ro Unsigned32 .1.3.6.1.4.1.388.6.16.3.1.1.15 |
ccMuStatsTable SEQUENCE OF CcMuStatsEntry .1.3.6.1.4.1.388.6.16.3.2 |
ccMuStatsEntry CcMuStatsEntry .1.3.6.1.4.1.388.6.16.3.2.1 |
ccMuTxPktsUcastThe number of Unicast packets transmitted to the MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.1 |
ccMuRxPktsUcastThe number of Unicast packets received from the MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.2 |
ccMuRxPktsNUcastThe number of Non unicast packets received from a MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.3 |
ccMuTxOctetsUcastThe number of unicast bytes transmitted to the MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.4 |
ccMuRxOctetsUcastThe number of unicast bytes received from an MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.5 |
ccMuRxOctetsNUcastThe number of Non Unicast Bytes received from an MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.6 |
ccMuRxUndecryptablePktsThe number of undecryptable packets received from an MUro Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.7 |
ccMuRxRssiNumPktsThe number of packets received from an MU for which all the signal related claculations in this table are donero Counter32 .1.3.6.1.4.1.388.6.16.3.2.1.8 |
ccMuRxRssiSumThe sum of Signal strength values of all the packets received from this MUro Integer32 .1.3.6.1.4.1.388.6.16.3.2.1.9 |
ccMuRxRssiSumSquaresThe sumsq of Signal strength of all the packets received from this MUro Counter64 .1.3.6.1.4.1.388.6.16.3.2.1.10 |
ccMuRxRssiMostRecentThe most recent value of the signal strength received from this MUro INTEGER .1.3.6.1.4.1.388.6.16.3.2.1.11 |
ccMuLastActivityThe time stamp at which the last activity was seen fromn this MUro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.3.2.1.12 |
ccMuRxPktsTableThe Number of Packets received at various rates from the Moblie Unit SEQUENCE OF CcMuRxPktsEntry .1.3.6.1.4.1.388.6.16.3.3 |
ccMuRxPktsEntry CcMuRxPktsEntry .1.3.6.1.4.1.388.6.16.3.3.1 |
ccMuRxPktsAt1MbThe number of packets received from the Mobile Unit at 1 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.1 |
ccMuRxPktsAt2MbThe number of packets received from the Mobile Unit at 2 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.2 |
ccMuRxPktsAt5pt5MbThe number of packets received from the Mobile Unit at 5.5 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.3 |
ccMuRxPktsAt6MbThe number of packets received from the Mobile Unit at 6 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.4 |
ccMuRxPktsAt9MbThe number of packets received from the Mobile Unit at 9 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.5 |
ccMuRxPktsAt11MbThe number of packets received from the Mobile Unit at 11 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.6 |
ccMuRxPktsAt12MbThe number of packets received from the Mobile Unit at 12 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.7 |
ccMuRxPktsAt18MbThe number of packets received from the Mobile Unit at 18 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.8 |
ccMuRxPktsAt22MbThe number of packets received from the Mobile Unit at 22 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.9 |
ccMuRxPktsAt24MbThe number of packets received from the Mobile Unit at 24 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.10 |
ccMuRxPktsAt36MbThe number of packets received from the Mobile Unit at 36 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.11 |
ccMuRxPktsAt48MbThe number of packets received from the Mobile Unit at 48 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.12 |
ccMuRxPktsAt54MbThe number of packets received from the Mobile Unit at 54 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.3.1.13 |
ccMuTxPktsTableThe Number of Packets transmitted to the Moblie Unit at various rates SEQUENCE OF CcMuTxPktsEntry .1.3.6.1.4.1.388.6.16.3.4 |
ccMuTxPktsEntry CcMuTxPktsEntry .1.3.6.1.4.1.388.6.16.3.4.1 |
ccMuTxPktsAt1MbThe number of packets transmitted to the Mobile Unit at 1 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.1 |
ccMuTxPktsAt2MbThe number of packets transmitted to the Mobile Unit at 2 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.2 |
ccMuTxPktsAt5pt5MbThe number of packets transmitted to the Mobile Unit at 5.5 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.3 |
ccMuTxPktsAt6MbThe number of packets transmitted to the Mobile Unit at 6 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.4 |
ccMuTxPktsAt9MbThe number of packets transmitted to the Mobile Unit at 9 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.5 |
ccMuTxPktsAt11MbThe number of packets transmitted to the Mobile Unit at 11 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.6 |
ccMuTxPktsAt12MbThe number of packets transmitted to the Mobile Unit at 12 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.7 |
ccMuTxPktsAt18MbThe number of packets transmitted to the Mobile Unit at 18 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.8 |
ccMuTxPktsAt22MbThe number of packets transmitted to the Mobile Unit at 22 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.9 |
ccMuTxPktsAt24MbThe number of packets transmitted to the Mobile Unit at 24 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.10 |
ccMuTxPktsAt36MbThe number of packets transmitted to the Mobile Unit at 36 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.11 |
ccMuTxPktsAt48MbThe number of packets transmitted to the Mobile Unit at 48 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.12 |
ccMuTxPktsAt54MbThe number of packets transmitted to the Mobile Unit at 54 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.4.1.13 |
ccMuRxOctetsTableThe number of Bytes received from the mU at various rates SEQUENCE OF CcMuRxOctetsEntry .1.3.6.1.4.1.388.6.16.3.5 |
ccMuRxOctetsEntry CcMuRxOctetsEntry .1.3.6.1.4.1.388.6.16.3.5.1 |
ccMuRxOctetsAt1MbThe number of bytes received from the Mobile Unit at 1 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.1 |
ccMuRxOctetsAt2MbThe number of bytes received from the Mobile Unit at 2 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.2 |
ccMuRxOctetsAt5pt5MbThe number of bytes received from the Mobile Unit at 5.5 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.3 |
ccMuRxOctetsAt6MbThe number of bytes received from the Mobile Unit at 6 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.4 |
ccMuRxOctetsAt9MbThe number of bytes received from the Mobile Unit at 9 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.5 |
ccMuRxOctetsAt11MbThe number of bytes received from the Mobile Unit at 11 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.6 |
ccMuRxOctetsAt12MbThe number of bytes received from the Mobile Unit at 12 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.7 |
ccMuRxOctetsAt18MbThe number of bytes received from the Mobile Unit at 18 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.8 |
ccMuRxOctetsAt22MbThe number of bytes received from the Mobile Unit at 22 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.9 |
ccMuRxOctetsAt24MbThe number of bytes received from the Mobile Unit at 24 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.10 |
ccMuRxOctetsAt36MbThe number of bytes received from the Mobile Unit at 36 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.11 |
ccMuRxOctetsAt48MbThe number of bytes received from the Mobile Unit at 48 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.12 |
ccMuRxOctetsAt54MbThe number of bytes received from the Mobile Unit at 54 Mbpsro Counter32 .1.3.6.1.4.1.388.6.16.3.5.1.13 |
ccMuTxOctetsTableThe number of bytes transmitted to the MU at various rate SEQUENCE OF CcMuTxOctetsEntry .1.3.6.1.4.1.388.6.16.3.6 |
ccMuTxOctetsEntry CcMuTxOctetsEntry .1.3.6.1.4.1.388.6.16.3.6.1 |
ccMuTxOctetsAt1MbThe number of bytes transmitted to the Mobile Unit at 1 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.1 |
ccMuTxOctetsAt2MbThe number of bytes transmitted to the Mobile Unit at 2 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.2 |
ccMuTxOctetsAt5pt5MbThe number of bytes transmitted to the Mobile Unit at 5.5 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.3 |
ccMuTxOctetsAt6MbThe number of bytes transmitted to the Mobile Unit at 6 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.4 |
ccMuTxOctetsAt9MbThe number of bytes transmitted to the Mobile Unit at 9 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.5 |
ccMuTxOctetsAt11MbThe number of bytes transmitted to the Mobile Unit at 11 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.6 |
ccMuTxOctetsAt12MbThe number of bytes transmitted to the Mobile Unit at 12 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.7 |
ccMuTxOctetsAt18MbThe number of bytes transmitted to the Mobile Unit at 18 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.8 |
ccMuTxOctetsAt22MbThe number of bytes transmitted to the Mobile Unit at 22 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.9 |
ccMuTxOctetsAt24MbThe number of bytes transmitted to the Mobile Unit at 24 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.10 |
ccMuTxOctetsAt36MbThe number of bytes transmitted to the Mobile Unit at 36 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.11 |
ccMuTxOctetsAt48MbThe number of bytes transmitted to the Mobile Unit at 48 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.12 |
ccMuTxOctetsAt54MbThe number of bytes transmitted to the Mobile Unit at 54 Mbps (does not include
re-tries)ro Counter32 .1.3.6.1.4.1.388.6.16.3.6.1.13 |
ccMuTxRetriesTableThe number of packets transmitted to the MU at various retries SEQUENCE OF CcMuTxRetriesEntry .1.3.6.1.4.1.388.6.16.3.7 |
ccMuTxRetriesEntry CcMuTxRetriesEntry .1.3.6.1.4.1.388.6.16.3.7.1 |
ccMuTxRetriesNoneThe number of bytes transmitted to the Mobile Unit with no retryro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.1 |
ccMuTxRetries01The number of bytes transmitted to the Mobile Unit with 1 retryro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.2 |
ccMuTxRetries02The number of bytes transmitted to the Mobile Unit with 2 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.3 |
ccMuTxRetries03The number of bytes transmitted to the Mobile Unit with 3 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.4 |
ccMuTxRetries04The number of bytes transmitted to the Mobile Unit with 4 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.5 |
ccMuTxRetries05The number of bytes transmitted to the Mobile Unit with 5 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.6 |
ccMuTxRetries06The number of bytes transmitted to the Mobile Unit with 6 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.7 |
ccMuTxRetries07The number of bytes transmitted to the Mobile Unit with 7 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.8 |
ccMuTxRetries08The number of bytes transmitted to the Mobile Unit with 8 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.9 |
ccMuTxRetries09The number of bytes transmitted to the Mobile Unit with 9 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.10 |
ccMuTxRetries10The number of bytes transmitted to the Mobile Unit with 10 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.11 |
ccMuTxRetries11The number of bytes transmitted to the Mobile Unit with 11 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.12 |
ccMuTxRetries12The number of bytes transmitted to the Mobile Unit with 12 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.13 |
ccMuTxRetries13The number of bytes transmitted to the Mobile Unit with 13 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.14 |
ccMuTxRetries14The number of bytes transmitted to the Mobile Unit with 14 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.15 |
ccMuTxRetries15The number of bytes transmitted to the Mobile Unit with 15 retriesrodeprecated Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.16 |
ccMuTxRetriesFailedThe number of bytes that were not sent due to excess retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.17 |
ccMuTxRetriesTotalA total sum of all retries across all packets sent
to this MU.
For example, if 4 packets have been sent, with the
following number of retires: 2, 0, 5, gave-up,
this value would be 2+0+5+16 = 23.ro Counter32 .1.3.6.1.4.1.388.6.16.3.7.1.18 |
ccMuTxRetriesMostRecentThe number of retries of the most recent transmissionro INTEGER .1.3.6.1.4.1.388.6.16.3.7.1.19 |
ccMuLastMacThis scalar records the MAC address of the most
recent MU to be Adopted, UnAdopted, or Denied.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.8 |
ccMuLastReasonThis value notes the reason for the most-recent
MU UnAdoption or Denial.
Enum item associationFailed indicates that a key
association field was missing, or a mismatch of
supported rates, etc.ro Enumeration .1.3.6.1.4.1.388.6.16.3.9 |
ccMuLastPortalThis value notes the reason for the most-recent
MU UnAdoption or Denial.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.16.3.10 |
ccMuRfSum OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.16.3.100 |
ccMuTxRetriesOctetsTableThe number of packets transmitted from the MU at various retries SEQUENCE OF CcMuTxRetriesOctetsEntry .1.3.6.1.4.1.388.6.16.3.100.1 |
ccMuTxRetriesOctetsEntry CcMuTxRetriesOctetsEntry .1.3.6.1.4.1.388.6.16.3.100.1.1 |
ccMuTxRetriesOctetsNoneThe number of packets transmitted to the Mobile Unit with no retryro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.1 |
ccMuTxRetriesOctets01The number of packets transmitted to the Mobile Unit with 1 retryro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.2 |
ccMuTxRetriesOctets02The number of packets transmitted to the Mobile Unit with 2 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.3 |
ccMuTxRetriesOctets03The number of packets transmitted to the Mobile Unit with 3 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.4 |
ccMuTxRetriesOctets04The number of packets transmitted to the Mobile Unit with 4 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.5 |
ccMuTxRetriesOctets05The number of packets transmitted to the Mobile Unit with 5 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.6 |
ccMuTxRetriesOctets06The number of packets transmitted to the Mobile Unit with 6 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.7 |
ccMuTxRetriesOctets07The number of packets transmitted to the Mobile Unit with 7 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.8 |
ccMuTxRetriesOctets08The number of packets transmitted to the Mobile Unit with 8 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.9 |
ccMuTxRetriesOctets09The number of packets transmitted to the Mobile Unit with 9 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.10 |
ccMuTxRetriesOctets10The number of packets transmitted to the Mobile Unit with 10 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.11 |
ccMuTxRetriesOctets11The number of packets transmitted to the Mobile Unit with 11 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.12 |
ccMuTxRetriesOctets12The number of packets transmitted to the Mobile Unit with 12 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.13 |
ccMuTxRetriesOctets13The number of packets transmitted to the Mobile Unit with 13 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.14 |
ccMuTxRetriesOctets14The number of packets transmitted to the Mobile Unit with 14 retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.15 |
ccMuTxRetriesOctets15The number of packets transmitted to the Mobile Unit with 15 retriesrodeprecated Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.16 |
ccMuTxRetriesOctetsFailedThe number of packets that were not sent due to excess retriesro Counter32 .1.3.6.1.4.1.388.6.16.3.100.1.1.17 |
ccMuSigStatsTableThe various signal strength information for this MU SEQUENCE OF CcMuSigStatsEntry .1.3.6.1.4.1.388.6.16.3.100.2 |
ccMuSigStatsEntry CcMuSigStatsEntry .1.3.6.1.4.1.388.6.16.3.100.2.1 |
ccMuSigStatsNumPktsThe Number of Packets from the MU fro which the signal strength calculations shown in this table are donero Counter32 .1.3.6.1.4.1.388.6.16.3.100.2.1.1 |
ccMuSigStatsSignalBestThe best value of the signal strength in Dbmro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.2 |
ccMuSigStatsSignalWorstThe worst value of signal strength in dBmro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.3 |
ccMuSigStatsSignalSumThe sum of signal strength of all the packets received from the MUro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.4 |
ccMuSigStatsSignalSumSquaresThe sum square of all the packets received from the MUro Counter64 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.5 |
ccMuSigStatsSignalMostRecentThe most recent signal strength value received from the MUro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.6 |
ccMuSigStatsNoiseBestThe best noise value heard by the Radio to which this MU is associated.
Here Best value of Noise implies the the least noise value.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.7 |
ccMuSigStatsNoiseWorstThe worst value of the noise strength as received by the radio to which the MU is associatedro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.8 |
ccMuSigStatsNoiseSumThe sum of all noise samples received from the Radio t which the MU is associsatedro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.9 |
ccMuSigStatsNoiseSumSquaresThe sumsq of all the noise samples received from the radio to which this MU is associatedro Counter64 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.10 |
ccMuSigStatsNoiseMostRecentThe strength of the most recent noise value heard from the radio
to which this MU is associatedro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.2.1.11 |
ccMuSigStatsSnrBestThe best value of snr calculated for this MUro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.2.1.12 |
ccMuSigStatsSnrWorstThe worst value of snr calculated for this MUro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.2.1.13 |
ccMuSigStatsSnrSumThe sum of all the SNR values calculated for this MUro Counter64 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.2.1.14 |
ccMuSigStatsSnrSumSquaresThe sum squqre of all the SNR values calculated for this MUro Counter64 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.2.1.15 |
ccMuSigStatsSnrMostRecentThe most recent value of the SNR calculated for this MUro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.2.1.16 |
ccMuSumStatsShortTable SEQUENCE OF CcMuSumStatsShortEntry .1.3.6.1.4.1.388.6.16.3.100.3 |
ccMuSumStatsShortEntry CcMuSumStatsShortEntry .1.3.6.1.4.1.388.6.16.3.100.3.1 |
ccMuSumStatsShortTimestampSnapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.3.100.3.1.1 |
ccMuSumStatsShortNumPktsThe number of packets used to calculate the statistics in
this windowro Unsigned32 UNITS "packets" .1.3.6.1.4.1.388.6.16.3.100.3.1.2 |
ccMuSumStatsShortPktsPerSec100Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.3.100.3.1.3 |
ccMuSumStatsShortPktsPerSecTx100Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.3.100.3.1.4 |
ccMuSumStatsShortPktsPerSecRx100Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.3.100.3.1.5 |
ccMuSumStatsShortThroughputActual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries)ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.3.1.6 |
ccMuSumStatsShortThroughputTxActual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.3.1.7 |
ccMuSumStatsShortThroughputRxActual number of bits RX over the window,
divided by the number of seconds in the windowro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.3.1.8 |
ccMuSumStatsShortAvgBitSpeedAn octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/receivedro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.3.1.9 |
ccMuSumStatsShortAvgMuSignalThe average of all signal values over the window.
NOTE: dBm are normally negative.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.3.1.10 |
ccMuSumStatsShortAvgMuNoiseThe average of all noise values over the windowro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.3.1.11 |
ccMuSumStatsShortAvgMuSnrThe average of all SNR values over the windowro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.3.1.12 |
ccMuSumStatsShortPp10kNUcastPktsRatio of packets that were NOT unicast to the total number of packets sent/received.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.3.1.13 |
ccMuSumStatsShortPp10kTxWithRetriesRatio of TX packets that experienced one or more retries to the total number of packets sent or received.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.3.1.14 |
ccMuSumStatsShortPp10kDroppedRatio of TX packets that were dropped due to excessive retries.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.3.1.15 |
ccMuSumStatsShortTxAvgRetries100For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00).ro ScaleBy100 UNITS "average x100" .1.3.6.1.4.1.388.6.16.3.100.3.1.16 |
ccMuSumStatsShortPp10kRxUndecryptRatio of RX packets that were undecryptable to the total number of packets received.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.3.1.17 |
ccMuSumStatsLongTable SEQUENCE OF CcMuSumStatsLongEntry .1.3.6.1.4.1.388.6.16.3.100.4 |
ccMuSumStatsLongEntry CcMuSumStatsLongEntry .1.3.6.1.4.1.388.6.16.3.100.4.1 |
ccMuSumStatsLongTimestampSnapshot of sysUpTime as of the END of the 'window' of time that this entry of values represents.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.388.6.16.3.100.4.1.1 |
ccMuSumStatsLongNumPktsThe number of packets used to calculate the statistics in
this windowro Unsigned32 UNITS "packets" .1.3.6.1.4.1.388.6.16.3.100.4.1.2 |
ccMuSumStatsLongPktsPerSec100Packets per second as averaged over the 'window'.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.3.100.4.1.3 |
ccMuSumStatsLongPktsPerSecTx100Packets per second TX as averaged over the 'window'.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).
Since SNMP does not convey decimal values, the result
is multiplied by 100.ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.3.100.4.1.4 |
ccMuSumStatsLongPktsPerSecRx100Packets per second RX as averaged over the 'window'.
Since SNMP does not convey decimal values, the result
is multiplied by 100ro ScaleBy100 UNITS "pkts per sec x100" .1.3.6.1.4.1.388.6.16.3.100.4.1.5 |
ccMuSumStatsLongThroughputActual number of bits sent and received over the window,
divided by the number of seconds in the window.
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries)ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.4.1.6 |
ccMuSumStatsLongThroughputTxActual number of bits TX over the window,
divided by the number of seconds in the window.
Each packet sucessfully sent counts as 1, (not N, where N
is the number of retries).ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.4.1.7 |
ccMuSumStatsLongThroughputRxActual number of bits RX over the window,
divided by the number of seconds in the windowro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.4.1.8 |
ccMuSumStatsLongAvgBitSpeedAn octet-weighted average of the speeds of all packets
sent/received. (For each possible speed, multiply the
number of octets sent/received by that speed; divide the
sum by the total number of octets; multiply by 8).
For transmitted packets, each packet sucessfully sent
counts as 1, (not N, where N is the number of retries).
This can be said in more plain english as: the average
bit-speed at which packets were sent/receivedro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.388.6.16.3.100.4.1.9 |
ccMuSumStatsLongAvgMuSignalThe average of all signal values over the window.
NOTE: dBm are normally negative.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.4.1.10 |
ccMuSumStatsLongAvgMuNoiseThe average of all noise values over the windowro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.16.3.100.4.1.11 |
ccMuSumStatsLongAvgMuSnrThe average of all SNR values over the windowro Integer32 UNITS "dB" .1.3.6.1.4.1.388.6.16.3.100.4.1.12 |
ccMuSumStatsLongPp10kNUcastPktsRatio of packets that were NOT unicast to the total number of packets sent/received.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.4.1.13 |
ccMuSumStatsLongPp10kTxWithRetriesRatio of TX packets that experienced one or more retries to the total number of packets sent or received.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.4.1.14 |
ccMuSumStatsLongPp10kDroppedRatio of TX packets that were dropped due to excessive retries.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.4.1.15 |
ccMuSumStatsLongTxAvgRetries100For all transmit packets (those that experienced some
retries, those that were successfully transmitted with
only 1 transmission, and those that attempted max times
and gave-up), the average number of RE-transmission
attempts.
Said another (though identical) way: the sum of all
tranmission attempts divided by the number of unique
packets attempted to be sent.
Since SNMP does not convey decimal values, the result
above is multiplied by 100.
If there were no RE-transmissions, this value would be 0.
If every single packet required exactly two tranmissions,
this value would be 100, (representing 1.00).ro ScaleBy100 UNITS "average x100" .1.3.6.1.4.1.388.6.16.3.100.4.1.16 |
ccMuSumStatsLongPp10kRxUndecryptRatio of RX packets that were undecryptable to the total number of packets received.
Expressed as parts-per-10000ro PartsPer10k UNITS "parts-per-10000" .1.3.6.1.4.1.388.6.16.3.100.4.1.17 |
ccWME OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.18 |
ccWMEprofileTableDescription.
Table for WME Profiles. SEQUENCE OF CcWMEprofileEntry .1.3.6.1.4.1.388.6.18.5 |
ccWMEprofileEntryDescription. CcWMEprofileEntry .1.3.6.1.4.1.388.6.18.5.1 |
ccWMEprofileIndexDescription.
Simple Index 1...10ro Integer32 .1.3.6.1.4.1.388.6.18.5.1.1 |
ccWMEprofilenameDescription.
WME Profile Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.18.5.1.2 |
ccWMEprofileDescDescription.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.18.5.1.3 |
ccWMEprofileAc1VoEcwminDescription.
WME Voice Access Category CWMin value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.4 |
ccWMEprofileAc1VoEcwmaxDescription.
WME Voice Access Category CWMax value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.5 |
ccWMEprofileAc1VoTxopLimitDescription.
WME Voice Access Category Txopstime value.(B)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.6 |
ccWMEprofileAc1VoAgTxopLimitDescription.
WME Voice Access Category Txopstime value.(A/G)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.7 |
ccWMEprofileAc1VoAifsnDescription.
WME Voice Access Category Aifsn value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.8 |
ccWMEprofileAc2ViEcwminDescription.
WME Video Access Category CWMin value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.9 |
ccWMEprofileAc2ViEcwmaxDescription.
WME Video Access Category CWMax value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.10 |
ccWMEprofileAc2ViTxopLimitDescription.
WME Video Access Category Txopstime value.(B)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.11 |
ccWMEprofileAc2ViAgTxopLimitDescription.
WME Video Access Category Txopstime value.(A/G)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.12 |
ccWMEprofileAc2ViAifsnDescription.
WME Video Access Category Aifsn value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.13 |
ccWMEprofileAc3BeEcwminDescription.
WME Best Effort Access Category CWMin valuerw Integer32 .1.3.6.1.4.1.388.6.18.5.1.14 |
ccWMEprofileAc3BeEcwmaxDescription.
WME Best Effort Access Category CWMax value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.15 |
ccWMEprofileAc3BeTxopLimitDescription.
WME Best Effort Access Category Txopstime value. (B)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.16 |
ccWMEprofileAc3BeAgTxopLimitDescription.
WME Best Effort Access Category Txopstime value.(A/G)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.17 |
ccWMEprofileAc3BeAifsnDescription.
WME Best Effort Access Category Aifsn value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.18 |
ccWMEprofileAc4BkEcwminDescription.
WME Background Access Category CWMin value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.19 |
ccWMEprofileAc4BkEcwmaxDescription.
WME Background Access Category CWMax value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.20 |
ccWMEprofileAc4BkTxopLimitDescription.
WME Background Access Category Txopstime value.(B)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.21 |
ccWMEprofileAc4BkAgTxopLimitDescription.
WME Background Access Category Txopstime value.(A/G)rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.22 |
ccWMEprofileAc4BkAifsnDescription.
WME Background Access Category Aifsn value.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.23 |
ccWMEprofileQosParamDescription.
WME profile QosParam
This is Read Only.rw Integer32 .1.3.6.1.4.1.388.6.18.5.1.24 |
ccWMEprofileRowStatusDescription.
Used for row creation/deletion.rw AbbrevRowStatus .1.3.6.1.4.1.388.6.18.5.1.25 |
ccPortalBeacon OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.19 |
ccPortalBeaconRptTableDescription.
This table describes the signal values (in dBm) of
beacons heard from other Portals
Note that the 'neighbor' Portals reported may not be the
geographically closest Portal, since other Portals which
are nearer may not be on the same channel.
This table is useful for determining if RF conditions
between Portals have radically changed over time SEQUENCE OF CcPortalBeaconRptEntry .1.3.6.1.4.1.388.6.19.5 |
ccPortalBeaconRptEntryDescription. CcPortalBeaconRptEntry .1.3.6.1.4.1.388.6.19.5.1 |
ccPortalBeaconRptPortalIndexDescription.
The ccPortalTable:ccPortalIndex of the neighbor Portal
that has been heard.ro INTEGER .1.3.6.1.4.1.388.6.19.5.1.1 |
ccPortalBeaconRptNumBeaconsHeardDescription.
Number of beacons reported in this entryro Integer32 .1.3.6.1.4.1.388.6.19.5.1.2 |
ccPortalBeaconRptBestDescription.
The strongest beacon signal strength heard since bootro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.19.5.1.3 |
ccPortalBeaconRptWorstDescription.
The weakest beacon signal strength heard since bootro Integer32 UNITS "dBm" .1.3.6.1.4.1.388.6.19.5.1.4 |
ccPortalBeaconRptSumDescription.
The sum of all signal values heardro Integer32 .1.3.6.1.4.1.388.6.19.5.1.5 |
ccPortalBeaconRptSumSquaresDescription.
The sum of each signal value heard, squared before
summingro Integer32 .1.3.6.1.4.1.388.6.19.5.1.6 |
ccPortalBeaconRptMostRecentDescription.
The most-recent value of signal heard for a beaconro Integer32 .1.3.6.1.4.1.388.6.19.5.1.7 |
ccPortalBeaconRptLastHeardDescription.
Snapshot of sysUpTime at the time the prior item(s) in
this entry were last updated.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.19.5.1.8 |
ccPortalBeaconRpFinderMacDescription.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.19.5.1.9 |
ccPortalBeaconRpFoundMacDescription.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.19.5.1.10 |
ccMuProbeRptTableDescription.
This table reports the signal strength of ProbeRequest
packets heard from each MU by each Portal that heard them SEQUENCE OF CcMuProbeRptEntry .1.3.6.1.4.1.388.6.19.6 |
ccMuProbeRptEntryDescription. CcMuProbeRptEntry .1.3.6.1.4.1.388.6.19.6.1 |
ccMuProbeRptSignalMostRecentDescription.
The signal strength, (in dBm), of the most-recently
heard ProbeRequest from the given MU, (specified by the
primary index: ccMuMac), from the given Portal,
(specified by the secondary index: ccPortalIndex).
In the event that the given Portal hears more than one
ProbeRequest from the MU in a short period of time,
(say, around 1-3sec), only the strongest value is
reported. (Such a case can occur when an MU is
performing an active scan, and the Portal hears the
ProbeRequests from the MU sent on on adjacent channels).ro Integer32 UNITS "dbm" .1.3.6.1.4.1.388.6.19.6.1.1 |
ccMuProbeRptLastHeardDescription.
Snapshot of sysUpTime at the time the prior item(s) in
this entry were last updatedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.19.6.1.2 |
ccMuProbeRptFinderMacDescription.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.19.6.1.3 |
ccMuProbeRptFoundMacDescription.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.19.6.1.4 |
ccSensor OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.20 |
ccSensorListList of Mac Address of all discovered sensorsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.1 |
ccApListList of AP300sro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.2 |
ccSensorRevertsyntax : <Mac - Address>
Mac address of AP300 of a sensor to revertrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.3 |
ccSensorConvertsyntax : <Mac - Address>
Mac address of AP300 that is to
be converted to a sensorrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.4 |
ccSensorEnablesyntax : Enable(1)/Disable(0)
Enable/Disable Sensorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.5 |
ccApSensorTableDescription. SEQUENCE OF CcApSensorEntry .1.3.6.1.4.1.388.6.20.6 |
ccApSensorEntryDescription. CcApSensorEntry .1.3.6.1.4.1.388.6.20.6.1 |
ccApSensorIndexDescription.ro INTEGER .1.3.6.1.4.1.388.6.20.6.1.1 |
ccApSensorMasksyntax : <Subnet Mask >
Subnet mask of the sensorrw IpAddress .1.3.6.1.4.1.388.6.20.6.1.2 |
ccApSensorGateWaysyntax : <Gate Way>
Gate Way of the sensorrw IpAddress .1.3.6.1.4.1.388.6.20.6.1.3 |
ccApSensorPrimarysyntax : <Primary Server Ip>
Primary Server of the sensorrw IpAddress .1.3.6.1.4.1.388.6.20.6.1.4 |
ccApSensorSecondarysyntax : <Secondary Server Ip>
Secondary Server of the sensorrw IpAddress .1.3.6.1.4.1.388.6.20.6.1.5 |
ccApSensorDhcpsyntax : Enable(1)/Disable(0)
Enable/Disable dhcprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.6.1.6 |
ccApSensorIpaddresssyntax : < Ip Address>
Ip Address of the sensorrw IpAddress .1.3.6.1.4.1.388.6.20.6.1.7 |
ccApSensorMacMac of the Sensor .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.6.20.6.1.8 |
ccV2dot0Groups OBJECT IDENTIFIER .1.3.6.1.4.1.388.6.1000 |