SIAE-SOFT-MIB
The SIAE-SOFT-MIB module enables SNMP-based monitoring and management of software release versions and maintenance states specifically on SIAE networking equipment. It provides visibility into the installed firmware or software image details to facilitate version control and integrity verification across the vendor's hardware infrastructure.
Imported Objects
Objects
22 total| Object Name |
|---|
softwareDownloadStatusTrapThis event is generated by ALFOHD-NE when the status of download is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) softwareDownloadStatus NOTIFICATION-TYPE .1.3.6.1.4.1.3373.1103.0.701 |
softwareMaintenance of software releases loaded on SIAE equiment. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.7 |
softwareMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.7.1 |
softwareEquipmentReleaseBench1ASCII string identifying the equipment release present in Bench1.ro DisplayString .1.3.6.1.4.1.3373.1103.7.2 |
softwareEquipmentReleaseBench1StatusStatus of the bench 1 software.ro Enumeration .1.3.6.1.4.1.3373.1103.7.3 |
softwareEquipmentReleaseBench2ASCII string identifying the equipment release present in Bench2.ro DisplayString .1.3.6.1.4.1.3373.1103.7.4 |
softwareEquipmentReleaseBench2StatusStatus of the bench 2 software.ro Enumeration .1.3.6.1.4.1.3373.1103.7.5 |
softwareIpAddressDwlServerIp address of the SNMP manager connected from which the Software is downloaded, if the leaf softwareRemoteIpAddressDwlServer is set '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.3373.1103.7.6 |
softwareGosipAddressDwlServerGOSIP address of the remote element from which the Software is downloaded.rw OCTET STRING .1.3.6.1.4.1.3373.1103.7.7 |
softwareDownloadfileCEM or LOM Directory and name of the descriptor file. The files with the SW code must be present in the same directory.rw DisplayString .1.3.6.1.4.1.3373.1103.7.8 |
softwareActionRequestThis Integer is a bit string with each bit when set has the following meaning: BIT 0 - Download request BIT 1 - Abort Download request BIT 2 - Bench switch request BIT 4 - Partial download BIT 5 - Forced Download BIT 6 - Implicit Activation BIT 7 - Delete bench not running BIT 8 - ODU FW download (whitout activation) BIT 9 - ODU FW activation BIT 10 - IDU FPGA download (whitout activation) BIT 11 - IDU FPGA activation The bit 4...6 enable/disable the different options on download request.rw Integer32 .1.3.6.1.4.1.3373.1103.7.9 |
softwareDownloadStatusStatus of SW download operation.ro Enumeration .1.3.6.1.4.1.3373.1103.7.10 |
softwareUnitTableTable with Software records concerning units within the equipment. SEQUENCE OF SoftwareUnitRecord .1.3.6.1.4.1.3373.1103.7.11 |
softwareUnitRecordSoftware record. SoftwareUnitRecord .1.3.6.1.4.1.3373.1103.7.11.1 |
softwareUnitIdThis object is used as Index of the softwareUnit Table and also identifies the unit in the equipment.ro Integer32 .1.3.6.1.4.1.3373.1103.7.11.1.1 |
softwareElementIdThis object is used as Index of the softwareUnit Table and also identifies the SW programmable element in the specified unit.ro Integer32 .1.3.6.1.4.1.3373.1103.7.11.1.2 |
softwareTypeFormat type.ro Enumeration .1.3.6.1.4.1.3373.1103.7.11.1.3 |
softwareUnitReleaseBench1ASCII string identifying the software release present in the programmable element of specified unit bench 1.ro DisplayString .1.3.6.1.4.1.3373.1103.7.11.1.4 |
softwareUnitReleaseBench2ASCII string identifying the software release present in the programmable element of specified unit bench 2.ro DisplayString .1.3.6.1.4.1.3373.1103.7.11.1.5 |
softwareUnitActualReleaseASCII string identifying the software release actually present in the programmable element of specified unit.ro DisplayString .1.3.6.1.4.1.3373.1103.7.11.1.6 |
softwareDownloadStatusTrapNotificationEnables/disables the trap generation on download status change.rw Enumeration .1.3.6.1.4.1.3373.1103.7.12 |
softwareRemoteIpAddressDwlServerIp address of the remote Server from which the Software is downloaded, different from SNMP manager connected IpAddress. It is used if different from '0.0.0.0'. After each download procedure the leaf is set to '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.3373.1103.7.13 |
More MIBs from SIAE MICROELETTRONICA spa
Browse all SIAE MICROELETTRONICA spaMIBs →The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
The SIAE-PTP-MIB module enables monitoring and management of SIAE hardware devices implementing the IEEE 1588-2008 Precision Time Protocol and ITU-T G.8275.1 telecom profile, specifically exposing metrics for clock synchronization states, grandmaster selection, and phase/time offset measurements.
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
The SIAE-ALARM-MIB module enables the monitoring of network element alarm state transitions and the retrieval of active alarm entries via SNMP for SIAE-managed infrastructure. It specifically tracks alarm severity, timestamp, and status changes to facilitate real-time fault detection and event logging.
The SIAE-SFP-MIB enables SNMP-based monitoring and alarm generation for SIAE Small Form-Factor Pluggable optical transceivers, exposing diagnostic parameters defined by SFF-8472 such as temperature, supply voltage, laser bias current, and optical transmit/receive power levels.
The SIAE-PMRXPWR-MIB module enables SNMP-based monitoring of received RF power levels within SIAE microwave radio systems, specifically tracking performance metrics such as instantaneous and average RX signal strength to assess link quality and detect signal degradation.