SIAE-SYNC-MIB
AI MIB Summary
The SIAE-SYNC-MIB module manages timing source configuration and synchronization states for SIAE broadcast infrastructure equipment, monitoring critical metrics such as reference clock status, synchronization lock status, and time deviation values to ensure precise frame and data alignment.
Timing Source Management.
Main OID:
sync.1.3.6.1.4.1.3373.1103.28
73
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
syncTiming Source Management. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.28 |
syncMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.28.1 |
timingGeneratorTableTable with TimingGenerator records. SEQUENCE OF TimingGenerator .1.3.6.1.4.1.3373.1103.28.2 |
timingGeneratorRecordTimingGenerator record. TimingGenerator .1.3.6.1.4.1.3373.1103.28.2.1 |
timingGeneratorIdThis object is used as Index of the Timing Generator Table.ro Integer32 .1.3.6.1.4.1.3373.1103.28.2.1.1 |
timingGeneratorT4vsT0This object is used to set or reset the condition T4 equal T0.rw Enumeration .1.3.6.1.4.1.3373.1103.28.2.1.2 |
timingGeneratorHoldOffTimeHoldOff time in milliseconds (300..1800).rw INTEGER .1.3.6.1.4.1.3373.1103.28.2.1.3 |
timingGeneratorWtrTimeWait Time to Restore in minutes (0..12).rw INTEGER .1.3.6.1.4.1.3373.1103.28.2.1.4 |
timingGeneratorSinkLosSetWait time (seconds) before to set Los of reference signal.rw INTEGER .1.3.6.1.4.1.3373.1103.28.2.1.5 |
timingGeneratorSinkLosResetWait time (seconds) before to reset Los of reference signal.rw INTEGER .1.3.6.1.4.1.3373.1103.28.2.1.6 |
timingGeneratorT0SquelchAlarmT0 squelch Alarm (Probable cause = xxx) with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.2.1.7 |
timingGeneratorT4SquelchAlarmT4 squelch Alarm (Probable cause = xxx) with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.2.1.8 |
timingGeneratorFreeRunningStatusFree running status (Probable cause = xxx) with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.2.1.9 |
timingGeneratorHoldoverStatusHoldover status (Probable cause = xxx) with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.2.1.10 |
timingGeneratorActiveStatusActive status (Probable cause = xxx) with associated severity.ro Enumeration .1.3.6.1.4.1.3373.1103.28.2.1.11 |
timingGeneratorT0CurrentQualityCurrent quality on T0.ro Enumeration .1.3.6.1.4.1.3373.1103.28.2.1.12 |
timingGeneratorT4CurrentQualityCurrent quality on T4.ro Enumeration .1.3.6.1.4.1.3373.1103.28.2.1.13 |
timingGeneratorT4MinimumQualityIf the Quality Level of the signal used to derive T4 falls below timingGeneratorT4MinimumQuality then the output will be squelched. The value ql-DNU inhibits T4 squelch due to this minimum Quality Level. This feature is enabled by timingGeneratorT4Squelch when timingGeneratorQualityEnable is on(2).rw Enumeration .1.3.6.1.4.1.3373.1103.28.2.1.14 |
timingGeneratorT0PreferredSourceObject identifier of the leaf timingSinkGenId of the timingSink instance selected as preferential clock source of T0. If no preferential timing sink is selected, the value should be set to the OBJECT IDENTIFIER { 0 0 }.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3373.1103.28.2.1.15 |
timingGeneratorT4PreferredSourceObject identifier of the leaf timingSinkGenId of the timingSink instance selected as preferential clock source of T4. If no preferential timing sink is selected, the value should be set to the OBJECT IDENTIFIER { 0 0 }.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3373.1103.28.2.1.16 |
timingGeneratorRowStatusStatus of this row of timingGeneratorTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.28.2.1.17 |
timingGeneratorMaintTableTable with TimingGenerator records. SEQUENCE OF TimingGeneratorMaintRecord .1.3.6.1.4.1.3373.1103.28.3 |
timingGeneratorMaintRecordTimingGenerator record. TimingGeneratorMaintRecord .1.3.6.1.4.1.3373.1103.28.3.1 |
timingGeneratorT4SquelchThis object is used to enable/disable T4 squelch.rw Enumeration .1.3.6.1.4.1.3373.1103.28.3.1.1 |
timingGeneratorStatusControlClock generator operating mode control. This item is linked to a manual operation (ManOpRecord) instance.rw Enumeration .1.3.6.1.4.1.3373.1103.28.3.1.2 |
timingGeneratorT0ForcedSourceObject identifier of the leaf timingSinkGenId of the timingSink instance selected as forced clock source of T0. If no forced timing sink is selected, the value should be set to the OBJECT IDENTIFIER { 0 0 }.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3373.1103.28.3.1.3 |
timingGeneratorT4ForcedSourceObject identifier of the leaf timingSinkGenId of the timingSink instance selected as forced clock source of T4. If no forced timing sink is selected, the value should be set to the OBJECT IDENTIFIER { 0 0 }.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3373.1103.28.3.1.4 |
timingGeneratorWtrClearSourceObject identifier of the leaf timingSinkGenId of the timingSink instance selected to clear WTR time. On read, this object return alvays an OBJECT IDENTIFIER {0 0}.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3373.1103.28.3.1.5 |
timingSinkTableTable with TimingSink records. SEQUENCE OF TimingSink .1.3.6.1.4.1.3373.1103.28.4 |
timingSinkRecordTimingSink record. TimingSink .1.3.6.1.4.1.3373.1103.28.4.1 |
timingSinkGenIdThis object is used as Index of the timingGeneratorTable and defines in union with timingSinkType and timingSinkId the reference signal.ro Integer32 .1.3.6.1.4.1.3373.1103.28.4.1.1 |
timingSinkIdThis object is used as Index of the timingSinkTable and defines in union with timingSinkType and timingSinkGenId the reference signal.ro Integer32 .1.3.6.1.4.1.3373.1103.28.4.1.2 |
timingSinkTypeThis object is used as Index of the timingSinkTable and defines if the reference signal is used to generate T0 or T4 system clock.ro Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.3 |
timingSinkIfIndexThe ifIndex value the agent selected for this timingSink interface.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.3373.1103.28.4.1.4 |
timingSinkSelectorThis object is used to select one of the possible clock source connected to this timingSink. Valid values are listed in timingSinkSelectorTable: only values of timingSinkSelectorId related to this instance of timinkSinkRecord are accepted. Only the values corresponding to the index timingSinkSelectorId of timinkSinkSelectorTable related to this instance of timinkSinkRecord will be accepted.rw Integer32 .1.3.6.1.4.1.3373.1103.28.4.1.5 |
timingSinkPriorityThis object is used to set the priority of the reference signal (p1 is the highest priority).rw Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.6 |
timingSinkLabelASCII string used to describe the reference signal when a trap is sent.ro DisplayString .1.3.6.1.4.1.3373.1103.28.4.1.7 |
timingSinkLosAlarmLoss of reference signal (Probable cause = xxx) alarm with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.4.1.8 |
timingSinkDriftAlarmDrift of reference signal (Probable cause = xxx) alarm with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.4.1.9 |
timingSinkActiveStatusActive status (Probable cause = xxx) status for the reference signal.ro Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.10 |
timingSinkCurrentQualityCurrent quality on sink instance.ro Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.11 |
timingSinkOverwriteTxQualityForcing of Tx quality parameter.rw Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.12 |
timingSinkOverwriteRxQualityForcing of Rx quality parameter.rw Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.13 |
timingSinkSentQualityQuality level written in the S1 byte of the outgoing STM-n.ro Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.14 |
timingSinkE1SabitSpecifies the San synchronization status bit used to indicate the clock quality level. Meaningful when the Sink source is an E1rw INTEGER .1.3.6.1.4.1.3373.1103.28.4.1.15 |
timingSinkEthPortRoleThis item configures how to handle the role of a 1000BASE-T port when it is used as a source of timing: choosing 'static', the role is set according ethLanPhyTable settings, choosing 'dynamic', the role is set consistently with the timing direction over the 1000baseT link chosen by SSM protocol.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.28.4.1.16 |
timingSinkRowStatusStatus of this row of timingSinkTablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.28.4.1.17 |
timingGeneratorManualSwitchtimingGeneratorId of the forced timingGenerator instance. If no preferred timing generator is selected, the value should be set to 0.rw Integer32 .1.3.6.1.4.1.3373.1103.28.5 |
timingGeneratorForcedSwitchtimingGeneratorId of the forced timingGenerator instance. If no forced timing generator is selected, the value should be set to 0.rw Integer32 .1.3.6.1.4.1.3373.1103.28.6 |
timingGeneratorT0SquelchAlarmSeverityCodeDefines the severity associated to the TimingGeneratorT0SquelchAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.7 |
timingGeneratorT4SquelchAlarmSeverityCodeDefines the severity associated to the timingGeneratorT4SquelchAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.8 |
timingGeneratorFreeRunningStatusSeverityCodeDefines the severity associated to the timingGeneratorFreeRunningStatus and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.9 |
timingGeneratorHoldoverStatusSeverityCodeDefines the severity associated to the timingGeneratorHoldoverStatus and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.10 |
timingGeneratorActiveStatusSeverityCodeDefines the severity associated to the timingGeneratorActiveStatus and enables/disables the trap generation on status change event.rw Enumeration .1.3.6.1.4.1.3373.1103.28.11 |
timingGeneratorQualityEnableQuality policy enablerw Enumeration .1.3.6.1.4.1.3373.1103.28.12 |
timingSinkLosAlarmSeverityCodeDefines the severity associated to the TimingSinkLosAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.13 |
timingSinkDriftAlarmSeverityCodeDefines the severity associated to the TimingSinkDriftAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.28.14 |
timingSinkActiveStatusSeverityCodeDefines the severity associated to the timingSinkActiveStatus and enables/disables the trap generation on status change event.rw Enumeration .1.3.6.1.4.1.3373.1103.28.15 |
timingSinkSelectorTableTable with TimingSinkSelector records. SEQUENCE OF TimingSinkSelector .1.3.6.1.4.1.3373.1103.28.16 |
timingSinkSelectorRecordTimingSinkSelector entry. Several instances of this entry can be create for each instance of timingSinkTable. Each entry represents a possible source selected by a multiplexer outside the SETS for a specific timingSink. Only the values corresponding to the index timingSinkSelectorId can be set to timingSinkSelector. TimingSinkSelector .1.3.6.1.4.1.3373.1103.28.16.1 |
timingSinkSelectorIdThis object is used as Index of the timingSinkSelectorTable and defines in union with timingSinkGenId, timingSinkType and timingSinkId the selected source by a multiplexer outside the SETS.ro Integer32 .1.3.6.1.4.1.3373.1103.28.16.1.1 |
timingSinkSelectorLabelASCII string used to describe the selectable timing source.ro DisplayString .1.3.6.1.4.1.3373.1103.28.16.1.2 |
esmcTableTable with TimingSinkSelector records. SEQUENCE OF EsmcRecord .1.3.6.1.4.1.3373.1103.28.17 |
esmcRecordesmcTable entry. Every entries describes an ESMC channel of a TE interface. EsmcRecord .1.3.6.1.4.1.3373.1103.28.17.1 |
esmcSsmEnableThis object enables SSM messaging on this ifIndex.rw Enumeration .1.3.6.1.4.1.3373.1103.28.17.1.1 |
esmcQlRxThis object show quality received on ESMC-PDU this interface.ro Enumeration .1.3.6.1.4.1.3373.1103.28.17.1.2 |
esmcQlTxThis object show quality transmitted in ESMC-PDU on this interface.ro Enumeration .1.3.6.1.4.1.3373.1103.28.17.1.3 |
esmcPktsRxThis object contains the total number of received ESMC-PDU packets on this interface.ro Counter32 .1.3.6.1.4.1.3373.1103.28.17.1.4 |
esmcPktsTxThis object contains the total number of transmitted ESMC-PDU packets on this interface.ro Counter32 .1.3.6.1.4.1.3373.1103.28.17.1.5 |
esmcPktsRxDroppedThis object contains the total number of dropped ESMC-PDU packets on this interface.ro Counter32 .1.3.6.1.4.1.3373.1103.28.17.1.6 |
esmcPktsRxErroredThis object contains the total number of dropped ESMC-PDU packets whose processing(decoding) resulted into error.ro Counter32 .1.3.6.1.4.1.3373.1103.28.17.1.7 |
esmc1000BaseTRoleThis object allows to input the clock generator role of a 1000BaseT interface. This objects is applicable when the quality management is disabled (timingGeneratorQualityEnable set to off(1)) and to all interfaces not connected to any timingSink when the quality management is enabled.rw Enumeration .1.3.6.1.4.1.3373.1103.28.17.1.8 |
esmcRowStatusStatus of this row of esmcTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.28.17.1.9 |