SIAE-RADIO-SYSTEM-MIB
AI MIB Summary
The SIAE-RADIO-SYSTEM-MIB facilitates the monitoring and management of SIAE radio transmission infrastructure, specifically exposing performance metrics such as RF link status, signal strength, error rates, and system health indicators for broadcast and telecommunications equipment.
Radio System MIB.
Main OID:
radioSystem.1.3.6.1.4.1.3373.1103.80
363
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
363 total| Object Name |
|---|
radioPrxChangeThis event is generated when radioPrx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpSnmpAgentAddress - agent IP address 2) radioIndex - branch index 3) radioName - user assinged name 4) radioPrx - PRX value NOTIFICATION-TYPE .1.3.6.1.4.1.3373.1103.0.8001 |
radioPtxChangeThis event is generated when radioPtx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpSnmpAgentAddress - agent IP address 2) radioIndex - branch index 3) radioName - user assigned name 4) radioPtx - PTX value NOTIFICATION-TYPE .1.3.6.1.4.1.3373.1103.0.8002 |
radioSystemRadio System MIB. MODULE-IDENTITY .1.3.6.1.4.1.3373.1103.80 |
radioSystemMibVersionNumerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.ro INTEGER .1.3.6.1.4.1.3373.1103.80.1 |
radioTableA list of radio interface entries. This table is useful to show the manager all the available radio interfaces on the equipment. Moreover it is a reference for Performance Monitoring (PWR and G828). SEQUENCE OF RadioEntry .1.3.6.1.4.1.3373.1103.80.2 |
radioEntryAn entry containing management information applicable to a particular radio interface. RadioEntry .1.3.6.1.4.1.3373.1103.80.2.1 |
radioIndexA unique value, greater than zero, for each radio interface. It is recommended that values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.3373.1103.80.2.1.1 |
radioLabelA textual string containing information about the radio interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.ro DisplayString .1.3.6.1.4.1.3373.1103.80.2.1.2 |
radioTypeThe type of interface.ro Enumeration .1.3.6.1.4.1.3373.1103.80.2.1.3 |
radioIfIndexThis object defines a greater than zero value to identify an interface in ifTable or a zero value if ifTable is not supported.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.3373.1103.80.2.1.4 |
radioStorageTypeThe storage type of this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.2.1.5 |
xpicTableA list of xpic radio interface entries. If a manager wants to make an xpic link, it should only add a particular xpic radio interface to an xpic link. SEQUENCE OF XpicEntry .1.3.6.1.4.1.3373.1103.80.3 |
xpicEntryAn entry containing management information applicable to a particular xpic radio interface. XpicEntry .1.3.6.1.4.1.3373.1103.80.3.1 |
xpicIndexA unique value, greater than zero, for each xpic radio interface. It is recommended that values are assigned contiguously starting from 1.ro Integer32 .1.3.6.1.4.1.3373.1103.80.3.1.1 |
xpicRadioIdxIndex of xpic radio interface, corresponding to an available xpic radio interface in radioTable.rw Integer32 .1.3.6.1.4.1.3373.1103.80.3.1.2 |
xpicRowstatusStatus of this conceptual row in xpicTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.3.1.3 |
xpicChTableA list of xpic channel entries. This table maps each xpic radio in respective xpic radio interface. SEQUENCE OF XpicChEntry .1.3.6.1.4.1.3373.1103.80.4 |
xpicChEntryAn entry containing management information applicable to a particular xpic channel. It defines radio interface and polarization for a given xpic channel. XpicChEntry .1.3.6.1.4.1.3373.1103.80.4.1 |
xpicChPolIndexThis object identifies the xpic radio polarization.ro Integer32 .1.3.6.1.4.1.3373.1103.80.4.1.1 |
xpicChRadioIdxXpic radio interface, corresponding to a radio interface in radioTable, used to make up the given xpic radio interface.rw Integer32 .1.3.6.1.4.1.3373.1103.80.4.1.2 |
xpicChRowstatusStatus of this conceptual row in xpicChTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.4.1.3 |
linkAvailableIndexShows an index which is available for creation of a new link in the system. It shows the smallest available index. Any attempt to create a link with a different index results in a failure.ro Integer32 .1.3.6.1.4.1.3373.1103.80.5 |
linkTableA list of link entries. SEQUENCE OF LinkEntry .1.3.6.1.4.1.3373.1103.80.6 |
linkEntryAn entry containing management information applicable to a particular link. LinkEntry .1.3.6.1.4.1.3373.1103.80.6.1 |
linkIndexA unique value, greater than zero, for each link. Manager must use the first available index, suggested by linkAvailableIndex.ro Integer32 .1.3.6.1.4.1.3373.1103.80.6.1.1 |
linkTypeThis object identifies link type. Supported link types are: single link, 1+1 Hot Standby, 1+1 Frequency Diversity, 2+0 XPIC, 2+2 XPIC Hot Standby, 2+2 XPIC Frequency Diversity and N+1.rw Enumeration .1.3.6.1.4.1.3373.1103.80.6.1.2 |
linkLabelA textual string containing information about the link. This string should give more details about link specific parameters.rw DisplayString .1.3.6.1.4.1.3373.1103.80.6.1.3 |
linkIfIndexThis object defines a greater than zero value to identify a link in ifTable or a zero value if ifTable is not supported.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.3373.1103.80.6.1.4 |
linkRowstatusStatus of this row of linkTable. This object is used to manage the creation and deletion of conceptual rows in linkTable. To create a row in this table, a manager should set rowstatus to createAndWait(5) and choose a link type. Respective entries in linkSettingsTable, linkStatusTable and tdmSettingsTable will be created by agent.In case of protection links proper entries in linkProtectionTable will be also created. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of rowstatus is notReady(3). When there is sufficient information to (attempt to) make the conceptual row available for use by the managed device, then the rowstatus column turns into notInService(2); manager must set rowstatus to active(1) to make the conceptual row active. The contents of linkSettingsTable and radioSettingsTable can be changed only if this object is notInService(2).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.6.1.5 |
linkChTableA list of link channel entries. SEQUENCE OF LinkChEntry .1.3.6.1.4.1.3373.1103.80.7 |
linkChEntryAn entry containing management information applicable to a particular link channel. LinkChEntry .1.3.6.1.4.1.3373.1103.80.7.1 |
linkChIndexLink Channel Index.ro Integer32 .1.3.6.1.4.1.3373.1103.80.7.1.1 |
linkChRadioIdxRadio channel index that corresponds to an available radio interface in radioTable.rw Integer32 .1.3.6.1.4.1.3373.1103.80.7.1.2 |
linkChRadioSettingsIdxRadio Settings Index. This object is a foreign key for a corresponding radioSettingsTable entry, which is automatically created by agent.rw Integer32 .1.3.6.1.4.1.3373.1103.80.7.1.3 |
linkChRowstatusStatus of this row of linkChTable. This object is used to manage the creation and deletion of conceptual rows in linkChTable. To create a row in this table, a manager should set rowstatus to createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of rowstatus is notReady(3). When there is sufficient information to (attempt to) make the conceptual row available for use by the managed device, then the rowstatus column turns into notInService(2); manager must set rowstatus to active(1) to make the conceptual row active. The content of radioSettingsTable can be changed only if this object is notInService(2).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.7.1.4 |
linkSettingsTableTable with link settings entries. This table contains all parameters of a radio frequency link. The content of this table can be changed by a manager if linkRowStatus is notInService(2). SEQUENCE OF LinkSettingsEntry .1.3.6.1.4.1.3373.1103.80.8 |
linkSettingsEntryRadio link entry LinkSettingsEntry .1.3.6.1.4.1.3373.1103.80.8.1 |
linkBandwidthAndModulationLink Modulation and Bandwidth (channel spacing). The value of this object value is computed by: 65536*modulation+bandwidth where bandwidth selection is: 0 = 3.5Mhz 1 = 7MHz 2 = 14MHz 3 = 28MHz 4 = 56MHz 5 = 10MHz 6 = 20MHz 7 = 30MHz 8 = 40MHz 9 = 50MHz 10 = 112Mhz 11 = 250Mhz 12 = 500Mhz 13 = 750Mhz 14 = 1Ghz 15 = 60MHz 16 = 80MHz and modulation is in bit-per-symbol: 1 = BPSK 2 = 4QAM 3 = 8PSK 4 = 16QAM 5 = 32QAM 6 = 64QAM 7 = 128QAM 8 = 256QAM 9 = 512QAM 10 = 1024QAM 11 = 2048QAM. 12 = 4096QAM. Examples: 250Mhz-4QAM (131083), 500Mhz-4QAM (131084), 250Mhz-16QAM (262155), 500Mhz-64QAM (393228). Note: 0 bit-per-symbol is not possible, so value 0 is used for BandwidthAndModulation unassigned.rw Integer32 .1.3.6.1.4.1.3373.1103.80.8.1.1 |
linkAcmEngineEnableThis object is used to enable/disable the ACM enginerw Enumeration .1.3.6.1.4.1.3373.1103.80.8.1.2 |
linkTxUpperProfileThe object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled.rw INTEGER .1.3.6.1.4.1.3373.1103.80.8.1.3 |
linkTxLowerProfileThe object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled.rw INTEGER .1.3.6.1.4.1.3373.1103.80.8.1.4 |
linkIdLink Identification (value 0..255)rw INTEGER .1.3.6.1.4.1.3373.1103.80.8.1.5 |
linkTxPwrThreshThreshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set.rw INTEGER .1.3.6.1.4.1.3373.1103.80.8.1.6 |
linkRxPwrThreshThreshold (value -40 , -99 dBm) for RX power below wich the related alarm is set.rw INTEGER (-99..-40) .1.3.6.1.4.1.3373.1103.80.8.1.7 |
linkSynchSetupProtocolEnableSynchronization Setup Protocol (SSP) controlrw Enumeration .1.3.6.1.4.1.3373.1103.80.8.1.8 |
linkProfilesSetSelectionSelection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profiles high throughput. For radio systems that do not have more sets of profiles, this object becomes read only and its reading shows the only one set of profiles supported.rw Enumeration .1.3.6.1.4.1.3373.1103.80.8.1.9 |
linkXpicControlProcedureSet by manager to enable\disable XPIC alarm control procedure. Only for XPIC configurations.rw Enumeration .1.3.6.1.4.1.3373.1103.80.8.1.10 |
radioSettingsTableTable with radio settings entries. This table contains all parameters of a radio terminal. The content of this table can be changed only linkRowStatus is notInService(2) SEQUENCE OF RadioSettingsEntry .1.3.6.1.4.1.3373.1103.80.9 |
radioSettingsEntryRadio terminal entry RadioSettingsEntry .1.3.6.1.4.1.3373.1103.80.9.1 |
radioSettingsIndexRadio settings index.ro Integer32 .1.3.6.1.4.1.3373.1103.80.9.1.1 |
radioSettingsRowStatusStatus of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.9.1.2 |
radioSettingsLabelA textual string containing information about the radio interface.ro DisplayString .1.3.6.1.4.1.3373.1103.80.9.1.3 |
radioTxFrequencyTransmitted frequency in KHz. Null value means invalid frequency.rw INTEGER .1.3.6.1.4.1.3373.1103.80.9.1.4 |
radioDuplexFrequencyValue of duplex frequency in KHz. -2 means not set.rw INTEGER .1.3.6.1.4.1.3373.1103.80.9.1.5 |
radioTxAttenuationTransmitter attenuation relative to nominal power (dBm).rw INTEGER .1.3.6.1.4.1.3373.1103.80.9.1.6 |
radioAtpcManualEnables/disables Atpc Manual operation.rw Enumeration .1.3.6.1.4.1.3373.1103.80.9.1.7 |
radioAtpcPwrHighATPC Control - Local Rx Power High (dBm range -30 to -80) -.rw Integer32 .1.3.6.1.4.1.3373.1103.80.9.1.8 |
radioAtpcPwrLowATPC Control - Local Rx Power Low (dBm range -30 to -80) -.rw Integer32 .1.3.6.1.4.1.3373.1103.80.9.1.9 |
radioAtpcRangeDefines the range of the ATPC regulation (expressed in dB) with respect to the current value of maximum Tx output, that is intended as the upper limit of the range. A null value means no limit: the lower limit of the range is equal to minimum Ptx.rw Integer32 .1.3.6.1.4.1.3373.1103.80.9.1.10 |
radioFreqTableSelectionRadioFrequencyTable key (channel spacing & modulation) selection.rw ChannelSpacing .1.3.6.1.4.1.3373.1103.80.9.1.11 |
tdmSettingsTableTable with tdm settings entries. SEQUENCE OF TdmSettingsEntry .1.3.6.1.4.1.3373.1103.80.10 |
tdmSettingsEntryAn entry containing tdm parameters for a particular link. TdmSettingsEntry .1.3.6.1.4.1.3373.1103.80.10.1 |
tdmPolIndexPolarization index.ro Integer32 .1.3.6.1.4.1.3373.1103.80.10.1.1 |
tdmE1ChannelNumber of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s).rw Integer32 .1.3.6.1.4.1.3373.1103.80.10.1.2 |
tdmE1FramerThis object is used to attach the framer to a given E1.rw Enumeration .1.3.6.1.4.1.3373.1103.80.10.1.3 |
radioCapabilitiesTableTable with RadioCapabilities entries: there is an entry for each radioTable rows. SEQUENCE OF RadioCapabilitiesEntry .1.3.6.1.4.1.3373.1103.80.11 |
radioCapabilitiesEntryRadioCapabilities entry. RadioCapabilitiesEntry .1.3.6.1.4.1.3373.1103.80.11.1 |
radioCapabilitiesCapabilityBit map to describe the radio features.ro RadioCapability .1.3.6.1.4.1.3373.1103.80.11.1.1 |
radioCapabilitiesTxMinFrequencyMinimum of available channel frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.11.1.2 |
radioCapabilitiesTxMaxFrequencyMaximum of available channel frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.11.1.3 |
radioCapabilitiesStepFrequencyMinimum frequency step in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.11.1.4 |
radioCapabilitiesMinPtxNominalValueMinimum nominal Ptx in dBm.ro Integer32 .1.3.6.1.4.1.3373.1103.80.11.1.5 |
radioCapabilitiesMaxPtxNominalValueMaximum nominal Ptx in dBm.ro Integer32 .1.3.6.1.4.1.3373.1103.80.11.1.6 |
radioCapabilitiesExtendedMinPwrMinimum extended Ptx power for fade margin.ro Integer32 .1.3.6.1.4.1.3373.1103.80.11.1.7 |
radioStatusTableTable with RadioStatus records: one record for 1+0 configuration and two record for 1+1 configuration. SEQUENCE OF RadioStatusEntry .1.3.6.1.4.1.3373.1103.80.12 |
radioStatusEntryRadioStatus record. RadioStatusEntry .1.3.6.1.4.1.3373.1103.80.12.1 |
radioCurrentDuplexFrequencySpacing between transmitted and received frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.12.1.1 |
radioTxChannelSpacingHalf of transmitted signal channel spacing in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.12.1.2 |
radioPrxReceived power level (dBm).ro Integer32 .1.3.6.1.4.1.3373.1103.80.12.1.3 |
radioPtxTransmitted power level (dBm).ro Integer32 .1.3.6.1.4.1.3373.1103.80.12.1.4 |
radioNormalizedMseNormalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB stepsro Integer32 .1.3.6.1.4.1.3373.1103.80.12.1.5 |
radioRxActiveStatusReceiver Active status with associated Severity In 1+1 Hot Standby radio system, only one RX is active. RXs are active in other configurations of the radio system.ro Enumeration .1.3.6.1.4.1.3373.1103.80.12.1.6 |
radioTxActiveStatusTransmitter Active status with associated Severity. In 1+1 Hot Standby radio system, only one TX is active. TXs are active in other configurations of the radio system.ro Enumeration .1.3.6.1.4.1.3373.1103.80.12.1.7 |
radioCableOpenAlarmCable connnecting ODU is open: alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.8 |
radioCableShortAlarmCable connnecting ODU is in short-circuit: alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.9 |
radioInvalidFrequencyAlarmInvalid frequency alarm with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.10 |
radioBaseBandRxAlarmBase Band Rx alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.11 |
radioModulatorFailAlarmModulator Fail Alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.12 |
radioDemodulatorFailAlarmDemodulator Fail Alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.13 |
radioRxPowerLowAlarmReceiver power low alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.14 |
radioTxPowerLowAlarmTransmitter power low alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.15 |
radioRemDemodulatorFailAlarmRemote Demodulator Fail Alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.16 |
radioVcoFailAlarmRT VCO fail alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.17 |
radioRxIFAgcAlarmRT Rx IF AGC fail alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.18 |
radioTxIFAgcAlarmRT Tx IF AGC fail alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.19 |
radioIduOduCommunicationAlarmCommunication from IDU towards ODU is downro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.20 |
radioOduIduCommunicationAlarmCommunication from ODU towards IDU is downro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.21 |
radioLocalOduAlarmSynthesisLocal ODU alarm synthesis with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.22 |
radioRemoteOduAlarmSynthesisLocal ODU alarm synthesis alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.23 |
radioConfigMismatchAlarmConfig Mismatch alarm status with associated severity and related map.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.24 |
radioConfigAlarmReasonBit map to describe the Config Mismatch Alarmro ConfigMismatchReason .1.3.6.1.4.1.3373.1103.80.12.1.25 |
radioRxQualityLowAlarmHigh BER Alarm status with associated severity.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.26 |
radioRxQualityWarningAlarmThe RX signal is close to cause errors on payload.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.12.1.27 |
radioXpdCross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extimated value of the XPD performed by the cross-polarization interference canceller (XPIC). This means that the measure is reliable if: - XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5), or radio2p2XpicFD(6)) - Alarm radioDemodulatorFailAlarm is cleared. - XPD is not too high, since without cross-polar interference the canceller is not able to works well. Basically, in this condition, the extimated XPD is greater than the real one.ro Integer32 .1.3.6.1.4.1.3373.1103.80.12.1.28 |
radioMaintTableTable with Command for maintenance of radio branch. Objects in this table is not persistent. An Instance of this table is created on creation of radioBranchEntry SEQUENCE OF RadioMaintEntry .1.3.6.1.4.1.3373.1103.80.13 |
radioMaintEntryRadio branch Maintenance record. RadioMaintEntry .1.3.6.1.4.1.3373.1103.80.13.1 |
radioTxStatusTransmitter status control. The value transmitterOff(1) is related to a manual operation. The value permanentOff(3) is persistent across restart.rw Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.1 |
radioCarrierOnlyCarrier only transmission control.rw Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.2 |
radioLoopEnables/disables the Radio Branch loops.rw Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.3 |
radioRFLoopTestResultRadio branch RT loop test result.ro Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.4 |
radioRFLoopTestPercTimeRadio branch RT loop test time percentagero INTEGER .1.3.6.1.4.1.3373.1103.80.13.1.5 |
radioRtPsuOffIt switches on/off the Rt power supplyrw Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.6 |
radioLomIt is used to enable the IP packet forwarding towards Radio.rw Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.7 |
radioXpicEnable of the cross polarization interference cancellation of this radio. The value disable is tied to a manual operation (ManOpRecord). This object is applicable only if thiis radio belongs to a 2+0 XPIC or 2+2 XPIC link.rw Enumeration .1.3.6.1.4.1.3373.1103.80.13.1.8 |
radioFrequencyTableAvailables channels for selected channel spacing and modulation (see leaf radioFreqTableSelection). SEQUENCE OF RadioFreqEntry .1.3.6.1.4.1.3373.1103.80.14 |
radioFreqTabEntryRadioFreqTab record. RadioFreqEntry .1.3.6.1.4.1.3373.1103.80.14.1 |
radioFreqChannelIdIndex of the tablero Integer32 .1.3.6.1.4.1.3373.1103.80.14.1.1 |
radioFreqChannelNumAvailable channel number.ro Integer32 .1.3.6.1.4.1.3373.1103.80.14.1.2 |
radioFreqValueFrequency related to radioFreqChannelNum.ro Integer32 .1.3.6.1.4.1.3373.1103.80.14.1.3 |
radioDuplexFrequencyTableTable with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. SEQUENCE OF RadioDuplexFreqEntry .1.3.6.1.4.1.3373.1103.80.15 |
radioDuplexFreqEntryDuplex Frequency entry. There is an entry for each available duplex frequency. RadioDuplexFreqEntry .1.3.6.1.4.1.3373.1103.80.15.1 |
radioDuplexFreqIdIndex of the table.ro Integer32 .1.3.6.1.4.1.3373.1103.80.15.1.1 |
radioDuplexFreqValueDuplex frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.15.1.2 |
radioModulationTableList of modulations related to channel spacing. SEQUENCE OF RadioModulationEntry .1.3.6.1.4.1.3373.1103.80.16 |
radioModulationEntryradioModulation record. RadioModulationEntry .1.3.6.1.4.1.3373.1103.80.16.1 |
radioChannelSpacingThis object identifies the channel spacing.ro ChannelSpacing .1.3.6.1.4.1.3373.1103.80.16.1.1 |
radioModulationMapList of modulations in the radioChanSpacingro ModulationMap .1.3.6.1.4.1.3373.1103.80.16.1.2 |
radioRefModulationMapList of modulations that can be selected as reference in the radioChanSpacingIdro ModulationMap .1.3.6.1.4.1.3373.1103.80.16.1.3 |
linkStatusTableTable with LinkStatusEntry. SEQUENCE OF LinkStatusEntry .1.3.6.1.4.1.3373.1103.80.17 |
linkStatusEntryLink status entry LinkStatusEntry .1.3.6.1.4.1.3373.1103.80.17.1 |
linkPolIndexThis object identifies the radio polarization. In XPIC radio link identifies one of the polarizations.ro INTEGER .1.3.6.1.4.1.3373.1103.80.17.1.1 |
linkAcmRxProfileThis object reports the ACM profile number in use in the radio Rx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTablero Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.2 |
linkAcmTxProfileThis object reports the ACM profile number in use in the radio Tx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTablero Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.3 |
linkAcmRxProfileLabelASCII string used to describe current acm rx profilero DisplayString .1.3.6.1.4.1.3373.1103.80.17.1.4 |
linkAcmTxProfileLabelASCII string used to describe current acm tx profilero DisplayString .1.3.6.1.4.1.3373.1103.80.17.1.5 |
linkAcmRxModulationThis object is the type of modulation of the Rx profile in use.ro BitsPerSymbol .1.3.6.1.4.1.3373.1103.80.17.1.6 |
linkAcmTxModulationThis object is the type of modulation of the Tx profile in use.ro BitsPerSymbol .1.3.6.1.4.1.3373.1103.80.17.1.7 |
linkAcmRxCodeThis object is the type of codificator of the Rx profile in use.ro Enumeration .1.3.6.1.4.1.3373.1103.80.17.1.8 |
linkAcmTxCodeThis object is the type of codificator of the Tx profile in use.ro Enumeration .1.3.6.1.4.1.3373.1103.80.17.1.9 |
linkTxETHCapacityThis object reports (in Kbits/sec) the transmitted payload capacity used by the Ethernetro Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.10 |
linkRxETHCapacityThis object reports (in Kbits/sec) the received payload capacity used by the Ethernetro Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.11 |
linkTxTDMCapacityThis object reports the capacity in kbit/sec reserved to TDM tributaries in tx ACM profile.ro Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.12 |
linkRxTDMCapacityThis object reports the capacity in kbit/sec reserved to TDM tributaries in rx ACM profile.ro Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.13 |
linkRescueModulationThis object is the modulation used when the remote terminal is unreachable, ie traffic on radio link is down.ro BitsPerSymbol .1.3.6.1.4.1.3373.1103.80.17.1.14 |
linkReducedCapacityAlarmThe equipment works in reduced capacityro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.15 |
linkLinkTelemetryFailAlarmFail of link telemetry communication channel with associated Severityro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.16 |
linkIdMismatchAlarmLink Identification Alarm with associated Severityro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.17 |
linkRadioEocAlarmFail of Radio Eoc link communication channel with associated Severityro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.18 |
linkSetupMismatchAlarmThe local setup doesn't match the setup of remote terminalro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.19 |
linkRescueSetupAlarmThe equipment is using the setup relative to the rescue modulationro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.20 |
linkXpicProcedureBlockAlarmOnly for XPIC equipment configurations. Equipment Controller XPIC procedure Alarm control with associated Severityro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.21 |
linkXpicRemTxOffAlarmOnly for XPIC equipment configurations. Remote TX OFF command with associated Severityro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.22 |
linkRemoteIduAlarmSynthesisSynthesis of the remote IDU alarmsro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.23 |
linkNotMatchingRadiosAlarmRadios of the link does not have matched parameters.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.17.1.24 |
linkConfigurationInProgressThe link is being configured and the table linkSettingsTable is not available for modifying parameters.ro Enumeration .1.3.6.1.4.1.3373.1103.80.17.1.25 |
linkXpdCross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polarized signal. This object shows an extimated value of the XPD performed by the cross-polarization interference canceller (XPIC). This means that the measure is reliable if: - XPIC is on (linkType is radio2p0Xpic(4), or radio2p2XpicHS(5), or radio2p2XpicFD(6)) - Alarm radioDemodulatorFailAlarm is cleared. - XPD is not too high, since without cross-polar interference the canceller is not able to works well. Basically, in this condition, the extimated XPD is greater than the real one.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.17.1.26 |
linkTfcTableTransmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter switch. This table was deprecated and replaced by linkTfcV2Table. It is a view of the rows of the linkTfcV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managers.deprecated SEQUENCE OF LinkTfcEntry .1.3.6.1.4.1.3373.1103.80.18 |
linkTfcEntryRadio link TFC entry.deprecated LinkTfcEntry .1.3.6.1.4.1.3373.1103.80.18.1 |
linkTfcActionreset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.18.1.1 |
linkTfcControlIt enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system).rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.18.1.2 |
linkTfcWatchWindowWatch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rwdeprecated INTEGER .1.3.6.1.4.1.3373.1103.80.18.1.3 |
linkTfcAlarmThresholdAlarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rwdeprecated INTEGER .1.3.6.1.4.1.3373.1103.80.18.1.4 |
linkTfcAlarmTransmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rodeprecated AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.18.1.5 |
linkTfcRowStatusStatus of this conceptual row in linkTfcTable.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.18.1.6 |
linkMaintTableTable with commands for maintenance of radio link. Objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry SEQUENCE OF LinkMaintEntry .1.3.6.1.4.1.3373.1103.80.19 |
linkMaintEntryRadio link maintenance entry. LinkMaintEntry .1.3.6.1.4.1.3373.1103.80.19.1 |
linkBerStartStop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance.rw Enumeration .1.3.6.1.4.1.3373.1103.80.19.1.1 |
linkBaseBandLomIt is used to enable the IP packet forwarding towards modems. This item is linked to a manual operation (ManOpRecord) instance.rw Enumeration .1.3.6.1.4.1.3373.1103.80.19.1.2 |
linkFadeMarginMeasureSet by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. This object is deprecated and replaced by fadeMarginMeasure.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.19.1.3 |
linkXpicControlProcedureResetSet by manager to reset the XPIC control procedure after a blocking action.rw Enumeration .1.3.6.1.4.1.3373.1103.80.19.1.4 |
linkBerTableTable with Command to estimate BER of radio equipment. Every objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry SEQUENCE OF LinkBerEntry .1.3.6.1.4.1.3373.1103.80.20 |
linkBerEntryRadio equipment BER estimate record. LinkBerEntry .1.3.6.1.4.1.3373.1103.80.20.1 |
linkBerErrorCounterHHigh 32 bit part of the 64 bit error counter. Bit 32-63.ro Counter32 .1.3.6.1.4.1.3373.1103.80.20.1.1 |
linkBerErrorCounterLLow 32 bit part of the 64 bit error counter. Bit 0-31.ro Counter32 .1.3.6.1.4.1.3373.1103.80.20.1.2 |
linkBerDataCounterHHigh 32 bit part of the 64 bit data counter. Bit 32-63.ro Counter32 .1.3.6.1.4.1.3373.1103.80.20.1.3 |
linkBerDataCounterLLow 32 bit part of the 64 bit data counter. Bit 0-31.ro Counter32 .1.3.6.1.4.1.3373.1103.80.20.1.4 |
linkBerSyncLossAlarmBER sync loss alarm.ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.20.1.5 |
linkBerSyncLossAlarmCounterBER sync loss events counter.ro Integer32 .1.3.6.1.4.1.3373.1103.80.20.1.6 |
linkBerElapsedTimeBER measure elapsed time.ro Integer32 .1.3.6.1.4.1.3373.1103.80.20.1.7 |
linkAcmTableTable with link records. SEQUENCE OF LinkAcmEntry .1.3.6.1.4.1.3373.1103.80.21 |
linkAcmEntryACM entries. LinkAcmEntry .1.3.6.1.4.1.3373.1103.80.21.1 |
linkAcmProfileIdThis object identifies the profile number for the radio selected by the object linkAcmId.ro Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.1 |
linkAcmProfileModulationThis object is the modulation of the profile.ro BitsPerSymbol .1.3.6.1.4.1.3373.1103.80.21.1.2 |
linkAcmProfileCodeThis object is the type of codificator of the profile.ro Enumeration .1.3.6.1.4.1.3373.1103.80.21.1.3 |
linkAcmProfileCapacityThis object is used to contain total capacity of profile (in kbits/sec).ro Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.4 |
linkAcmProfileLabelASCII string used to assign a name to profile.rw DisplayString .1.3.6.1.4.1.3373.1103.80.21.1.5 |
linkAcmProfileEnableThe object is used to contain if the use of this profile is enabled or disabledro Enumeration .1.3.6.1.4.1.3373.1103.80.21.1.6 |
linkAcmMaxTDMCapacityThis object reports the maximum capacity that can be assigned to the TDM traffic. The capacity is specified in number of E1 (2Mbit/s). This object has been superseded by linkE1vsSTM1CapacityTable.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.7 |
linkAcmPowerScalingThis object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable. This object is deprecated: see combinedRadioPowerScalingTable.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.8 |
linkAcmDownshiftThresholdThe object is used to contain the downshift threshold in dB/10.ro Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.9 |
linkAcmUpshiftThresholdThe object is used to contain the upshift threshold in dB/10.ro Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.10 |
linkAcmActiveProfileThis object is used to contain the active status of this profile. The value of the object is related to linkAcmRxProfile and linkAcmTxProfile of the LinkStatusEntry.ro Enumeration .1.3.6.1.4.1.3373.1103.80.21.1.11 |
linkAcmTDMCapacityThis object reports current TDM capacity (in kbits/sec) of the profile.ro Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.12 |
linkAcmETHCapacityThis object reports current ETH capacity (in Kbits/sec) of the profile.ro Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.13 |
linkAcmAtpcRxPowerScalingThis object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation. This object is deprecated: see combinedRadioPowerScalingTable.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.14 |
linkAcmPowerRangeThis object contains (in dB) the current value of ATPC range. This object is deprecated: see combinedRadioPowerScalingTable.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.21.1.15 |
linkProTableA list of protection link entries. This table was deprecated and replaced by linkProV2Table. It is a view of the rows of the linkProV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managersdeprecated SEQUENCE OF LinkProEntry .1.3.6.1.4.1.3373.1103.80.22 |
linkProEntryAn entry containing management information applicable to a protected link.deprecated LinkProEntry .1.3.6.1.4.1.3373.1103.80.22.1 |
linkProProtectionTxChIdxThis object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set.rwdeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.22.1.1 |
linkProProtectionRxChIdxThis object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set.rwdeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.22.1.2 |
linkProTxWtrTimeIt defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set.rwdeprecated INTEGER .1.3.6.1.4.1.3373.1103.80.22.1.3 |
linkProRxWtrTimeIt defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set.rwdeprecated INTEGER .1.3.6.1.4.1.3373.1103.80.22.1.4 |
linkProTxSwitchedChIdxThis object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.22.1.5 |
linkProRxSwitchedChIdxThis object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.22.1.6 |
linkProTxRevertiveIt defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.22.1.7 |
linkProRxRevertiveIt defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.22.1.8 |
linkProExtraTrafficThis object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architectures different for N+1.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.22.1.9 |
linkProRowStatusStatus of this conceptual row in linkProTable.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.22.1.10 |
linkProMaintTableA list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProTable. This table was deprecated and replaced by linkProMaintV2Table. It is a view of the rows of the linkProMaintV2Table with the same linkIndex and linkPolIndex equal to 1, in order to ensure compatibility with old SNMP managersdeprecated SEQUENCE OF LinkProMaintEntry .1.3.6.1.4.1.3373.1103.80.23 |
linkProMaintEntryAn entry containing maintenance commands applicable to a protected link.deprecated LinkProMaintEntry .1.3.6.1.4.1.3373.1103.80.23.1 |
linkProMaintTxLockoutCommand to enable/disable tx lockout. This object is applicable only in case of N+1 protections.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.23.1.1 |
linkProMaintRxLockoutCommand to enable/disable rx lockout. This object is applicable only in case of N+1 protections.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.23.1.2 |
linkProMaintTxForcedCommand to force switch to a given transmission channel. Zero value means no switch.rwdeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.23.1.3 |
linkProMaintRxForcedCommand to force switch to a given receiving channel. Zero value means no switch.rwdeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.23.1.4 |
linkProMaintTxWtrResetClear wait time to restore making the revertive path immediately available.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.23.1.5 |
linkProMaintRxWtrResetClear wait time to restore making the revertive path immediately available.rwdeprecated Enumeration .1.3.6.1.4.1.3373.1103.80.23.1.6 |
linkCapabilitiesTableTable with RadioCapabilities entries: there is an entry for each linkTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the capabilities of each channel. As such, this table is declared deprecated and replaced by combinedRadioCapabilitiesTable.deprecated SEQUENCE OF LinkCapabilitiesEntry .1.3.6.1.4.1.3373.1103.80.24 |
linkCapabilitiesEntryLinkCapabilities entry.deprecated LinkCapabilitiesEntry .1.3.6.1.4.1.3373.1103.80.24.1 |
linkCapabilitiesCapabilityBit map to describe the radio features.rodeprecated RadioCapability .1.3.6.1.4.1.3373.1103.80.24.1.1 |
linkCapabilitiesTxMinFrequencyMinimum of available channel frequency in KHz.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.24.1.2 |
linkCapabilitiesTxMaxFrequencyMaximum of available channel frequency in KHz.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.24.1.3 |
linkCapabilitiesStepFrequencyMinimum frequency step in KHz.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.24.1.4 |
linkCapabilitiesMinPtxNominalValueMinimum nominal Ptx in dBm.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.24.1.5 |
linkCapabilitiesMaxPtxNominalValueMaximum nominal Ptx in dBm.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.24.1.6 |
linkCapabilitiesExtendedMinPwrMinimum extended Ptx power for fade margin.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.24.1.7 |
linkFrequencyTableAvailables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the allowable frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioFrequencyTable.deprecated SEQUENCE OF LinkFreqEntry .1.3.6.1.4.1.3373.1103.80.25 |
linkFreqTabEntryLinkFreqTab record.deprecated LinkFreqEntry .1.3.6.1.4.1.3373.1103.80.25.1 |
linkFreqChannelIdIndex of the tablerodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.25.1.1 |
linkFreqChannelNumAvailable channel number.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.25.1.2 |
linkFreqValueFrequency related to linkFreqChannelNum.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.25.1.3 |
linkDuplexFrequencyTableTable with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+1 FD radio link, managers have to know the allowable duplex frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioDuplexFrequencyTable.deprecated SEQUENCE OF LinkDuplexFreqEntry .1.3.6.1.4.1.3373.1103.80.26 |
linkDuplexFreqEntryDuplex Frequency entry. For each available duplex frequencydeprecated LinkDuplexFreqEntry .1.3.6.1.4.1.3373.1103.80.26.1 |
linkDuplexFreqIdIndex of the table.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.26.1.1 |
linkDuplexFreqValueDuplex frequency in KHz.rodeprecated Integer32 .1.3.6.1.4.1.3373.1103.80.26.1.2 |
linkModulationTableList of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. SEQUENCE OF LinkModulationEntry .1.3.6.1.4.1.3373.1103.80.27 |
linkModulationEntrylinkModulation record. LinkModulationEntry .1.3.6.1.4.1.3373.1103.80.27.1 |
linkChannelSpacingThis object identifies the channel spacing.ro ChannelSpacing .1.3.6.1.4.1.3373.1103.80.27.1.1 |
linkModulationMapList of modulation in the linkChanSpacingro ModulationMap .1.3.6.1.4.1.3373.1103.80.27.1.2 |
linkRefModulationMapList of modulations that can be selected as reference in the linkChanSpacingIdro ModulationMap .1.3.6.1.4.1.3373.1103.80.27.1.3 |
combinedRadioCapabilitiesTableTable with RadioCapabilities entries: there is an entry for each radioSettingTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios belonging to the link. In 1+1 FD radio link, managers have to know the allowable duplex frequencies of each channel. As such, this table is declared deprecated and replaced by combinedRadioCapabilitiesTable. SEQUENCE OF CombinedRadioCapabilitiesEntry .1.3.6.1.4.1.3373.1103.80.28 |
combinedRadioCapabilitiesEntrycombinedRadioCapabilities entry. CombinedRadioCapabilitiesEntry .1.3.6.1.4.1.3373.1103.80.28.1 |
combinedRadioCapabilitiesCapabilityBit map to describe the radio features.ro RadioCapability .1.3.6.1.4.1.3373.1103.80.28.1.1 |
combinedRadioCapabilitiesTxMinFrequencyMinimum of available channel frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.28.1.2 |
combinedRadioCapabilitiesTxMaxFrequencyMaximum of available channel frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.28.1.3 |
combinedRadioCapabilitiesStepFrequencyMinimum frequency step in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.28.1.4 |
combinedRadioCapabilitiesMinPtxNominalValueMinimum nominal Ptx in dBm.ro Integer32 .1.3.6.1.4.1.3373.1103.80.28.1.5 |
combinedRadioCapabilitiesMaxPtxNominalValueMaximum nominal Ptx in dBm.ro Integer32 .1.3.6.1.4.1.3373.1103.80.28.1.6 |
combinedRadioCapabilitiesExtendedMinPwrMinimum extended Ptx power for fade margin.ro Integer32 .1.3.6.1.4.1.3373.1103.80.28.1.7 |
combinedRadioFrequencyTableAvailables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. SEQUENCE OF CombinedRadioFreqEntry .1.3.6.1.4.1.3373.1103.80.29 |
combinedRadioFreqTabEntrycombinedRadioFreqTab record. CombinedRadioFreqEntry .1.3.6.1.4.1.3373.1103.80.29.1 |
combinedRadioFreqChannelIdIndex of the tablero Integer32 .1.3.6.1.4.1.3373.1103.80.29.1.1 |
combinedRadioFreqChannelNumAvailable channel number.ro Integer32 .1.3.6.1.4.1.3373.1103.80.29.1.2 |
combinedRadioFreqValueFrequency related to combinedRadioFreqChannelNum.ro Integer32 .1.3.6.1.4.1.3373.1103.80.29.1.3 |
combinedRadioDuplexFrequencyTableTable with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. SEQUENCE OF CombinedRadioDuplexFreqEntry .1.3.6.1.4.1.3373.1103.80.30 |
combinedRadioDuplexFreqEntryDuplex Frequency entry. There is an entry for each available duplex frequency. CombinedRadioDuplexFreqEntry .1.3.6.1.4.1.3373.1103.80.30.1 |
combinedRadioDuplexFreqIdIndex of the table.ro Integer32 .1.3.6.1.4.1.3373.1103.80.30.1.1 |
combinedRadioDuplexFreqValueDuplex frequency in KHz.ro Integer32 .1.3.6.1.4.1.3373.1103.80.30.1.2 |
combinedRadioPowerScalingTableList of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. SEQUENCE OF CombinedRadioPowerScalingEntry .1.3.6.1.4.1.3373.1103.80.31 |
combinedRadioPowerScalingEntryradioPowerScaling record. CombinedRadioPowerScalingEntry .1.3.6.1.4.1.3373.1103.80.31.1 |
combinedRadioPowerScalingThis object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power scaling value is achieved from the table linkPtxProfileTable.ro Integer32 .1.3.6.1.4.1.3373.1103.80.31.1.1 |
combinedRadioAtpcRxPowerScalingThis object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the upper modulation.ro Integer32 .1.3.6.1.4.1.3373.1103.80.31.1.2 |
combinedRadioPowerRangeThis object contains (in dB) the current value of ATPC range.ro Integer32 .1.3.6.1.4.1.3373.1103.80.31.1.3 |
stm1BulkMappingTableTable with entries containing stm-1 bulk transport parameters for a particular link. For each link are present as many rows as the STM-1 that the link can carry in bulk mode. SEQUENCE OF Stm1BulkMappingEntry .1.3.6.1.4.1.3373.1103.80.32 |
stm1BulkMappingEntryAn row in stm1BulkSettingsTable. Stm1BulkMappingEntry .1.3.6.1.4.1.3373.1103.80.32.1 |
stm1BulkPolIndexPolarization index.ro Integer32 .1.3.6.1.4.1.3373.1103.80.32.1.1 |
stm1BulkChanIndexSTM-1 channel index. The range of this object is from 1 to N, where N is the number of STM-1 that a link can carry in bulk mode.ro Integer32 .1.3.6.1.4.1.3373.1103.80.32.1.2 |
stm1BulkChannelIndex of the stm-1 in stm1Table. The SNMP agent will accept only index of a STM-1 present in stm1Table with stm1Structure set to opaque(4).rw Stm1IndexOrZero .1.3.6.1.4.1.3373.1103.80.32.1.3 |
linkE1vsSTM1CapacityTableTable with entries containing the E1 cpacity according to the tributaries STM-1 configured to be carried in bulk mode. SEQUENCE OF LinkE1vsSTM1CapacityEntry .1.3.6.1.4.1.3373.1103.80.33 |
linkE1vsSTM1CapacityEntryAn row in linkE1vsSTM1CapacityTable. LinkE1vsSTM1CapacityEntry .1.3.6.1.4.1.3373.1103.80.33.1 |
linkE1vsSTM1CapacityStm1Number of tributaries STM-1 configured to be transported in bulk mode. Integer32 .1.3.6.1.4.1.3373.1103.80.33.1.1 |
linkE1vsSTM1CapacityE1Number of E1 that can be carried by this profile according to the the tributaries STM-1 carried in bulk mode.ro Integer32 .1.3.6.1.4.1.3373.1103.80.33.1.2 |
linkTfcV2TableTransmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter switch. SEQUENCE OF LinkTfcV2Entry .1.3.6.1.4.1.3373.1103.80.34 |
linkTfcV2EntryRadio link TFC entry. LinkTfcV2Entry .1.3.6.1.4.1.3373.1103.80.34.1 |
linkTfcV2Actionreset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rw Enumeration .1.3.6.1.4.1.3373.1103.80.34.1.1 |
linkTfcV2ControlIt enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system).rw Enumeration .1.3.6.1.4.1.3373.1103.80.34.1.2 |
linkTfcV2WatchWindowWatch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rw INTEGER .1.3.6.1.4.1.3373.1103.80.34.1.3 |
linkTfcV2AlarmThresholdAlarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).rw INTEGER .1.3.6.1.4.1.3373.1103.80.34.1.4 |
linkTfcV2AlarmTransmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system).ro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.34.1.5 |
linkTfcV2RowStatusStatus of this conceptual row in linkTfcV2Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.34.1.6 |
linkProV2TableA list of protection link entries. SEQUENCE OF LinkProV2Entry .1.3.6.1.4.1.3373.1103.80.35 |
linkProV2EntryAn entry containing management information applicable to a protected link. LinkProV2Entry .1.3.6.1.4.1.3373.1103.80.35.1 |
linkProV2ProtectionTxChIdxThis object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set.rw Integer32 .1.3.6.1.4.1.3373.1103.80.35.1.1 |
linkProV2ProtectionRxChIdxThis object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value different from zero must be set.rw Integer32 .1.3.6.1.4.1.3373.1103.80.35.1.2 |
linkProV2TxWtrTimeIt defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set.rw INTEGER .1.3.6.1.4.1.3373.1103.80.35.1.3 |
linkProV2RxWtrTimeIt defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or protection is not revertive, a value different from zero cannot be set.rw INTEGER .1.3.6.1.4.1.3373.1103.80.35.1.4 |
linkProV2TxSwitchedChIdxThis object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema.ro Integer32 .1.3.6.1.4.1.3373.1103.80.35.1.5 |
linkProV2RxSwitchedChIdxThis object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema.ro Integer32 .1.3.6.1.4.1.3373.1103.80.35.1.6 |
linkProV2TxRevertiveIt defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.rw Enumeration .1.3.6.1.4.1.3373.1103.80.35.1.7 |
linkProV2RxRevertiveIt defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive.rw Enumeration .1.3.6.1.4.1.3373.1103.80.35.1.8 |
linkProV2ExtraTrafficThis object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architectures different for N+1.rw Enumeration .1.3.6.1.4.1.3373.1103.80.35.1.9 |
linkProV2RowStatusStatus of this conceptual row in linkProV2Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3373.1103.80.35.1.10 |
linkProMaintV2TableA list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProV2Table. SEQUENCE OF LinkProMaintV2Entry .1.3.6.1.4.1.3373.1103.80.36 |
linkProMaintV2EntryAn entry containing maintenance commands applicable to a protected link. LinkProMaintV2Entry .1.3.6.1.4.1.3373.1103.80.36.1 |
linkProMaintV2TxLockoutCommand to enable/disable tx lockout. This object is applicable only in case of N+1 protections.rw Enumeration .1.3.6.1.4.1.3373.1103.80.36.1.1 |
linkProMaintV2RxLockoutCommand to enable/disable rx lockout. This object is applicable only in case of N+1 protections.rw Enumeration .1.3.6.1.4.1.3373.1103.80.36.1.2 |
linkProMaintV2TxForcedCommand to force switch to a given transmission channel. Zero value means no switch.rw Integer32 .1.3.6.1.4.1.3373.1103.80.36.1.3 |
linkProMaintV2RxForcedCommand to force switch to a given receiving channel. Zero value means no switch.rw Integer32 .1.3.6.1.4.1.3373.1103.80.36.1.4 |
linkProMaintV2TxWtrResetClear wait time to restore making the revertive path immediately available.rw Enumeration .1.3.6.1.4.1.3373.1103.80.36.1.5 |
linkProMaintV2RxWtrResetClear wait time to restore making the revertive path immediately available.rw Enumeration .1.3.6.1.4.1.3373.1103.80.36.1.6 |
sspTableA list of operative and administrative set of parameters. This table holds three row for every link (and its polarizations) configured in the NE: 1) administative parameters of local NE 2) operative parameters of local NE 3) administative parameters of remote NE SEQUENCE OF SspEntry .1.3.6.1.4.1.3373.1103.80.37 |
sspEntryAn entry containing SSP relevant parameters. SspEntry .1.3.6.1.4.1.3373.1103.80.37.1 |
sspParameterTypeThis object identifies what parameters are for. Enumeration .1.3.6.1.4.1.3373.1103.80.37.1.1 |
sspLinkBandwidthLink Bandwidth (channel spacing).ro Enumeration .1.3.6.1.4.1.3373.1103.80.37.1.2 |
sspLinkModulationLink reference modulation.ro Enumeration .1.3.6.1.4.1.3373.1103.80.37.1.3 |
sspLinkAcmEngineEnableThis object is used to enable/disable the ACM engine.ro Enumeration .1.3.6.1.4.1.3373.1103.80.37.1.4 |
sspLinkTxUpperProfileThe object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled.ro INTEGER .1.3.6.1.4.1.3373.1103.80.37.1.5 |
sspLinkTxLowerProfileThe object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled.ro INTEGER .1.3.6.1.4.1.3373.1103.80.37.1.6 |
sspLinkSynchSetupProtocolEnableSynchronization Setup Protocol (SSP) control.ro Enumeration .1.3.6.1.4.1.3373.1103.80.37.1.7 |
sspLinkProfilesSetSelectionSelection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greater robustness against to the set of profiles high throughput. For radio systems that do not have more sets of profiles, this object becomes read only and its reading shows the only one set of profiles supported.ro Enumeration .1.3.6.1.4.1.3373.1103.80.37.1.8 |
sspTdmE1ChannelNumber of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mbit/s).ro Integer32 .1.3.6.1.4.1.3373.1103.80.37.1.9 |
sspTdmStm1ChannelNumber of STM-1 channels transported in bulk mode.ro Integer32 .1.3.6.1.4.1.3373.1103.80.37.1.10 |
radioLoopCapabilityTableThis table shows which group a radio loop belongs to. Radios with the same group number (identifier) close loop simultaneously. SEQUENCE OF RadioLoopCapabilityEntry .1.3.6.1.4.1.3373.1103.80.38 |
radioLoopCapabilityEntryAn entry containing a group identifier for each radio loop type. RadioLoopCapabilityEntry .1.3.6.1.4.1.3373.1103.80.38.1 |
radioLoopRfGroupThe group to which the radio RF loop belong to.ro Integer32 .1.3.6.1.4.1.3373.1103.80.38.1.1 |
radioLoopIqGroupThe group to which the radio IQ loop belong to.ro Integer32 .1.3.6.1.4.1.3373.1103.80.38.1.2 |
radioLoopBaseBandGroupThe group to which the radio base loop belong to.ro Integer32 .1.3.6.1.4.1.3373.1103.80.38.1.3 |
radioRxBerThresholdTableThis table shows the nominal and measured values of RX power at a bit error rate (BER) equal to 10e-6. SEQUENCE OF RadioRxBerThresholdEntry .1.3.6.1.4.1.3373.1103.80.39 |
radioRxBerThresholdEntryAn entry containing the RX power thresholds. RadioRxBerThresholdEntry .1.3.6.1.4.1.3373.1103.80.39.1 |
radioRxBerThresholdStatusThis object shows whether the following objects are significant.ro Enumeration .1.3.6.1.4.1.3373.1103.80.39.1.1 |
radioNominalRxBerThresholdThe nominal value of RX power @ BER equal to 10e-6ro Integer32 .1.3.6.1.4.1.3373.1103.80.39.1.2 |
radioMeasuredRxBerThresholdThe measured value of RX power @ BER equal to 10e-6.ro Integer32 .1.3.6.1.4.1.3373.1103.80.39.1.3 |
radioRemDemodulatorFailAlarmSeverityCodeDefines the severity associated to the radioRemDemodulatorFailAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.50 |
radioRxActiveStatusTrapNotificationEnable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for radioRxActivestatusrw Enumeration .1.3.6.1.4.1.3373.1103.80.51 |
radioTxActiveStatusTrapNotificationDefine the severity associated to the radioTxActivestatus and enable/disable the trap generation on status change event.rw Enumeration .1.3.6.1.4.1.3373.1103.80.52 |
radioCableOpenAlarmSeverityCodeDefines the severity associated to the radioCableOpen and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.53 |
radioCableShortAlarmSeverityCodeDefines the severity associated to the radioCableShort and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.54 |
radioInvalidFrequencyAlarmSeverityCodeDefines the severity associated to the radioInvalidFrequencyAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.55 |
radioBaseBandRxAlarmSeverityCodeDefines the severity associated to the radioBaseBandRxAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.56 |
radioModulatorFailAlarmSeverityCodeDefines the severity associated to the radioModulatorFailAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.57 |
radioDemodulatorFailAlarmSeverityCodeDefines the severity associated to the radioDemodulatorFailAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.58 |
radioRxPowerLowAlarmSeverityCodeDefines the severity associated to the radioRxPowerLowAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.59 |
radioTxPowerLowAlarmSeverityCodeDefines the severity associated to the radioTxPowerLowAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.60 |
radioVcoFailAlarmSeverityCodeDefines the severity associated to the radioVcoFailAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.61 |
radioRxIFAgcAlarmSeverityCodeDefines the severity associated to the radioRxIFAgcAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.62 |
radioTxIFAgcAlarmSeverityCodeDefines the severity associated to the radioTxIFAgcAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.63 |
radioIduOduCommunicationAlarmSeverityCodeDefine the severity associated to the radioIduOduCommunicationAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.64 |
radioOduIduCommunicationAlarmSeverityCodeDefine the severity associated to the radioOduIduCommunicationAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.65 |
radioLocalOduAlarmSynthesisSeverityCodeDefine the severity associated to the radioLocalOduAlarmSynthesis and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.66 |
radioRemoteOduAlarmSynthesisSeverityCodeDefine the severity associated to the radioRemoteOduAlarmSynthesis and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.67 |
radioConfigMismatchAlarmSeverityCodeDefines the severity associated to the radioConfigMismatchAlarm and enables/disables the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.68 |
radioPrxHysteresisValueDefines the delta value associated to the radioPrx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed.rw Integer32 .1.3.6.1.4.1.3373.1103.80.69 |
radioPtxHysteresisValueDefines the delta value associated to the radioPtx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed.rw Integer32 .1.3.6.1.4.1.3373.1103.80.70 |
radioPrxHysteresisValueTrapNotificationEnables/disables the Rx change trap generation on status change event.rw Enumeration .1.3.6.1.4.1.3373.1103.80.71 |
radioPtxHysteresisValueTrapNotificationEnables/disables the Tx change trap generation on status change event.rw Enumeration .1.3.6.1.4.1.3373.1103.80.72 |
radioRxQualityLowAlarmSeverityCodeDefine the severity associated to the radioRxQualityLowAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.73 |
radioRxQualityWarningAlarmSeverityCodeDefine the severity associated to the radioRxQualityWarningAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.74 |
linkReducedCapacityAlarmSeverityCodeDefine the severity associated to the linkReducedCapacityAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.75 |
linkLinkTelemetryFailAlarmSeverityCodeDefine the severity associated to the linkLinkTelemetryFailAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.76 |
linkIdMismatchAlarmSeverityCodeDefine the severity associated to the linkIdMismatchAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.77 |
linkRadioEocAlarmSeverityCodeDefine the severity associated to the linkRadioEocAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.78 |
linkSetupMismatchAlarmSeverityCodeDefine the severity associated to the linkSetupMismatchAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.79 |
linkRescueSetupAlarmSeverityCodeDefine the severity associated to the linkRescueSetupAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.80 |
linkXpicProcedureBlockAlarmSeverityCodeDefine the severity associated to the linkXpicProcedureBlockAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.81 |
linkXpicRemTxOffAlarmAlarmSeverityCodeDefine the severity associated to the linkXpicRemTxOffAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.82 |
linkLocalIduAlarmSynthesisSynthesis of the local IDU alarmsro AlarmStatus (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.83 |
linkLocalIduAlarmSynthesisSeverityCodeDefine the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.84 |
linkRemoteIduAlarmSynthesisSeverityCodeDefine the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.85 |
linkTfcAlarmSeverityCodeDefine the severity associated to the linkTfcV2Alarm (linkTfcAlarm) and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.86 |
linkBerSyncLossAlarmSeverityCodeDefine the severity associated to the linkBerSyncLossAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.87 |
linkNotMatchingRadiosAlarmSeverityCodeDefine the severity associated to the linkNotMatchingRadiosAlarm and enable/disable the trap generation on status change event.rw AlarmSeverityCode (SIAE-ALARM-MIB) .1.3.6.1.4.1.3373.1103.80.88 |
channelSpacingSelectionhis object selects which channel spacings the radio link has to support: - etsi: Compliant with European Telecommunication Standards Institute - fcc: Compliant with Federal Communications Commissionrw Bits .1.3.6.1.4.1.3373.1103.80.89 |
fadeMarginMeasureSet by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance.rw Enumeration .1.3.6.1.4.1.3373.1103.80.90 |
linkConfigurationInProgressTrapNotificationEnable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for linkConfigurationInProgressrw Enumeration .1.3.6.1.4.1.3373.1103.80.91 |