HMTRACKING-SNMP-MIB
AI MIB Summary
The HMTRACKING-SNMP-MIB module provides SNMP management definitions for Hirschmann (Belden) Platform devices to monitor private tracking sessions and associated state metrics. It enables the collection of specific tracking data, such as active session counts and tracking object statuses, for network visibility and fault detection on these industrial networking platforms.
The Hirschmann Private Tracking MIB definitions for Platform devices.
Main OID:
hmTracking.1.3.6.1.4.1.248.14.15
32
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
hmTrackingThe Hirschmann Private Tracking MIB definitions for Platform devices. MODULE-IDENTITY .1.3.6.1.4.1.248.14.15 |
hmTrackingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.14.15.1 |
hmTrackEventThe events of hmTrackEvent. OBJECT IDENTIFIER .1.3.6.1.4.1.248.14.15.1.0 |
hmTrackStatusChangeEventSent when the state of a tracking instance changes between up and down. NOTIFICATION-TYPE .1.3.6.1.4.1.248.14.15.1.0.1 |
hmTrackingTableThis table contains variables to define
an entry in the Hirschmann Tracking database. SEQUENCE OF HmTrackingEntry .1.3.6.1.4.1.248.14.15.1.1 |
hmTrackingEntryThe entry of the hmTrackingTable. HmTrackingEntry .1.3.6.1.4.1.248.14.15.1.1.1 |
hmTrackIdThe id of an object being tracked.ro Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.1 |
hmTrackRowStatusDefines the status of the Tracking database entry.
Set to createAndWait(5) to create a new row.
Set to destroy(6) to delete an entry.
Set to notInService(2) to change an entry.
Reads as active(1) if the tracked object exists and is trackable,
notReady(3) otherwise.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.14.15.1.1.1.2 |
hmTrackTypeThe kind of an object being tracked.rw Enumeration .1.3.6.1.4.1.248.14.15.1.1.1.3 |
hmTrackStateShows if the tracked object is currently UP or DOWN.ro Enumeration .1.3.6.1.4.1.248.14.15.1.1.1.4 |
hmTrackNumberOfChangesThe number of state changes after an object being
tracked, entered its operational state.
If the current state was entered prior to the last
re-initialization of the local network management
subsystem, then this object contains a zero
value.ro Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.5 |
hmTrackTimeSinceLastChangeThe time difference to the last state change of an object being
tracked (in hundredths of a second).
If the current state was entered prior to the last
re-initialization of the local network management
subsystem, then this object contains a zero
value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.248.14.15.1.1.1.6 |
hmTrackIfNumberThe number of the interface being tracked.
The number of the interface to send ping
packets. For ping objects the value 65535
is used to show that no valid interface
number has been set. It cannot be written.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.14.15.1.1.1.7 |
hmTrackIfLinkUpDelayIf a link-up recovers within this delay,
the tracked object is not considered as up.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.8 |
hmTrackIfLinkDownDelayIf a link-down recovers within this delay,
the tracked object is not considered as down.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.9 |
hmTrackPingIpAddressThe IP address of the router being monitored.rw IpAddress .1.3.6.1.4.1.248.14.15.1.1.1.10 |
hmTrackPingIntervalThe number of seconds between the pings to the
target IP address.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.11 |
hmTrackPingMissThis specifies the number of consecutive ping
misses until the tracked object is considered
to be down.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.12 |
hmTrackPingSuccessThis specifies the number of consecutive ping
successes until the tracked object is considered
to be up.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.13 |
hmTrackPingTimeoutThis specifies the timeout in milliseconds for
a ping reply. After the timeout the ping reply
is considered as lost.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.14 |
hmTrackPingTTLThis specifies the time to live for a ping request
packet.rw Integer32 .1.3.6.1.4.1.248.14.15.1.1.1.15 |
hmTrackPingBestRouteIfNumberThis shows the number of the interface which
belongs to the best route. The interface number
is zero if the best route is not used to send
ping packets.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.14.15.1.1.1.16 |
hmTrackLogicalOperatorDefines the logical operation performed on the instancesrw Enumeration .1.3.6.1.4.1.248.14.15.1.1.1.17 |
hmTrackSendStateChangeTrapEnables or disables the sending of a trap when hmTrackState changesrw Enumeration .1.3.6.1.4.1.248.14.15.1.1.1.18 |
hmTrackingApplicationTableThis table contains information about registered
applications, for each object being tracked. SEQUENCE OF HmTrackingApplicationEntry .1.3.6.1.4.1.248.14.15.1.2 |
hmTrackingApplicationEntryThe entry of the hmTrackingApplicationTable. HmTrackingApplicationEntry .1.3.6.1.4.1.248.14.15.1.2.1 |
hmTrackAppIdThe id of an application which tracks an object. Integer32 .1.3.6.1.4.1.248.14.15.1.2.1.2 |
hmTrackAppNameThe name of the registered application.ro DisplayString .1.3.6.1.4.1.248.14.15.1.2.1.3 |
hmTrackLogicalInstanceTableThis table contains information the tracking
instances that are combined into a logical
tracking instance. SEQUENCE OF HmTrackLogicalInstanceEntry .1.3.6.1.4.1.248.14.15.1.3 |
hmTrackLogicalInstanceEntryThe entry of the hmTrackLogicalInstanceTable. HmTrackLogicalInstanceEntry .1.3.6.1.4.1.248.14.15.1.3.1 |
hmTrackLogicalInstanceIdThe id of an object that is a member of the logical tracking object. Integer32 .1.3.6.1.4.1.248.14.15.1.3.1.2 |
hmTrackLogicInstRowStatusDefines the status of the Logic Tracking member entry.
Set to createAndGo(4) to create a new row.
Set to destroy(6) to delete an entry.
Reads as active(1) if the row exists.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.14.15.1.3.1.3 |