HMLLDP-MIB
The Hirschmann Private LLDP MIB definitions for Platform devices.
Main OID:
hmLLDP.1.3.6.1.4.1.248.14.7
20
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
hmLLDPThe Hirschmann Private LLDP MIB definitions for Platform devices. MODULE-IDENTITY .1.3.6.1.4.1.248.14.7 |
hmLLDPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.248.14.7.1 |
hmLLDPAdminStatusDURABLE:
Enables/disables the IEEE802.1AB functionality
on this device.
If disabled(2), the LLDP protocol is inactive,
but the LLDP MIBs can be accessed.rw Enumeration .1.3.6.1.4.1.248.14.7.1.1 |
hmLLDPInterfaceTableThis table contains variables for each interface of
the switch. SEQUENCE OF HmLLDPIfEntry .1.3.6.1.4.1.248.14.7.1.2 |
hmLLDPIfEntryThe entry of the hmLLDPInterfaceTable. HmLLDPIfEntry .1.3.6.1.4.1.248.14.7.1.2.1 |
hmLLDPIfaceGroupIDindex to identify an interface card. This value is never
greater than hmSysGroupCapacity.ro Integer32 .1.3.6.1.4.1.248.14.7.1.2.1.1 |
hmLLDPIfaceIDindex to identify an interface within an interface card.ro Integer32 .1.3.6.1.4.1.248.14.7.1.2.1.2 |
hmLLDPIfaceHirmaModeConfigure Hirschmann LLDP on this physical port.
If an IEEE802.1AB capable device not manufactured by Hirschmann
is connected to a port,
hmLLDPIfaceHirmaMode should be set to disabled (4) for this port.rw Enumeration .1.3.6.1.4.1.248.14.7.1.2.1.3 |
hmLLDPIfaceFDBModeIf configured to lldpOnly(1), only received LLDP messages
will be used to populate the LLDP-MIB's remTable.
If configured to macOnly(2), learned mac addresses out of the switch's forwarding database (FDB)
will be used to populate the LLDP-MIB's remTable.
If configured to both(3), both received LLDP messages
and learned mac addresses out of the switch's forwarding database (FDB)
will be used to populate the LLDP-MIB's remTable.
If configured to autoDetect(4) and LLDP messages are received on this port,
this mode will behave like lldpOnly(1), otherwise it will behave like macOnly(2).rw Enumeration .1.3.6.1.4.1.248.14.7.1.2.1.4 |
hmLLDPIfaceMaxNeighborsConfigure Hirschmann LLDP on this physical port.
This value limits the number of entries in the remTable for this port.rw Integer32 .1.3.6.1.4.1.248.14.7.1.2.1.5 |
hmLLDPStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.248.14.7.2 |
hmLLDPStatsIfTableThis table contains variables for each interface of
the switch. SEQUENCE OF HmLLDPStatsIfEntry .1.3.6.1.4.1.248.14.7.2.1 |
hmLLDPStatsIfEntryThe entry of the hmLLDPStatsIfTable. HmLLDPStatsIfEntry .1.3.6.1.4.1.248.14.7.2.1.1 |
hmLLDPStatsIfaceGroupIDindex to identify an interface card. This value is never
greater than hmSysGroupCapacity.ro Integer32 .1.3.6.1.4.1.248.14.7.2.1.1.1 |
hmLLDPStatsIfaceIDindex to identify an interface within an interface card.ro Integer32 .1.3.6.1.4.1.248.14.7.2.1.1.2 |
hmLLDPStatsIfaceTotalFDBEntryCountThe total number of learned entries in the forwarding database (FDB) for this port.ro Counter32 .1.3.6.1.4.1.248.14.7.2.1.1.3 |
hmLLDPStatsIfaceTotalEntryCountThe total number of remote connections in the LLDP MIB's remTable for this port.ro Counter32 .1.3.6.1.4.1.248.14.7.2.1.1.4 |
hmLLDPStatsIfaceIEEEEntryCountThe number of remote connections in the LLDP MIB's remTable for this port
that were detected because an LLDP message from an IEEE source was received.ro Counter32 .1.3.6.1.4.1.248.14.7.2.1.1.5 |
hmLLDPStatsIfaceHirmaEntryCountThe number of remote connections in the LLDP MIB's remTable for this port
that were detected because an LLDP message from an Hirschmann source was received.ro Counter32 .1.3.6.1.4.1.248.14.7.2.1.1.6 |
hmLLDPStatsIfaceFDBEntryCountThe number of remote connections in the LLDP MIB's remTable for this port
that were detected in the forwarding database (FDB) for this port.ro Counter32 .1.3.6.1.4.1.248.14.7.2.1.1.7 |