HM2-TRAFFICMGMT-MIB
AI MIB Summary
The HM2-TRAFFICMGMT-MIB module enables SNMP-based monitoring and configuration of traffic management policies, including Quality of Service (QoS) parameters, bandwidth allocation, and queue management states on Hirschmann (Belden) network switches. It exposes specific counters and gauges for packet classification, shaping rates, and policy enforcement metrics to facilitate granular traffic control analysis.
Hirschmann Traffic Management MIB. Copyright (C) 2011. All Rights Reserved.
Main OID:
hm2TrafficMgmtMib.1.3.6.1.4.1.248.11.31
17
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
hm2TrafficMgmtMibHirschmann Traffic Management MIB. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.31 |
hm2TrafficMgmtMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.31.0 |
hm2TrafficMgmtMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.31.1 |
hm2TrafficMgmtIfTableA list of management objects for traffic control per interface. SEQUENCE OF Hm2TrafficMgmtIfEntry .1.3.6.1.4.1.248.11.31.1.1 |
hm2TrafficMgmtIfEntryTraffic Mgmt table entry. Hm2TrafficMgmtIfEntry .1.3.6.1.4.1.248.11.31.1.1.1 |
hm2TrafficMgmtIfFlowControlEnables or disables flow control per portrw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.31.1.1.1.1 |
hm2TrafficMgmtIfEgressShapingRateMaximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is either specified in terms of percentage of overall link speed for the port in 1% increments or absolute in kbps. A value of 0 means there is no maximum bandwidth limit in effect. The default value is 0. Valid value ranges depend on the value returned by object hm2TrafficMgmtIfEgressShapingRateUnit. If that object returns percent(1), hm2TrafficMgmtIfEgressShapingRate accepts values 0..100. If that object returns kbps(2), hm2TrafficMgmtIfEgressShapingRate accepts values 0,64..4294967295.rw Unsigned32 .1.3.6.1.4.1.248.11.31.1.1.1.2 |
hm2TrafficMgmtIfEgressShapingRateUnitThe unit of the interface shaping value. Can be either percentage of port speed or kilobits per second (kbps).ro Enumeration .1.3.6.1.4.1.248.11.31.1.1.1.3 |
hm2TrafficMgmtIfIngressStormCtlThresholdUnitConfigures the units of the threshold value(s) to percentage of port speed or absolute packets per second.rw Enumeration .1.3.6.1.4.1.248.11.31.1.1.1.4 |
hm2TrafficMgmtIfIngressStormCtlBcastModeIf enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.31.1.1.1.5 |
hm2TrafficMgmtIfIngressStormCtlBcastThresholdConfigures the broadcast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate. This threshold is also valid for multicasts or unknown unicasts, when the device does not support a separate limiter per storm type. (A separate limiter per storm-type is supported when hm2TrafficMgmtIngressStormBucketType has the value 'multi-bucket')rw Unsigned32 .1.3.6.1.4.1.248.11.31.1.1.1.6 |
hm2TrafficMgmtIfIngressStormCtlMcastModeIf enabled, multicast storm recovery will function on this port. When you specify Enable for multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.31.1.1.1.7 |
hm2TrafficMgmtIfIngressStormCtlMcastThresholdConfigures the multicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate.rw Unsigned32 .1.3.6.1.4.1.248.11.31.1.1.1.8 |
hm2TrafficMgmtIfIngressStormCtlUcastModeIf enabled, unknown unicast storm recovery will function on this port. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.31.1.1.1.9 |
hm2TrafficMgmtIfIngressStormCtlUcastThresholdConfigures the unicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate.rw Unsigned32 .1.3.6.1.4.1.248.11.31.1.1.1.10 |
hm2TrafficMgmtFlowControlEnables or disables flow control for the switch unit.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.31.1.2 |
hm2TrafficMgmtIngressStormBucketTypeEnables or disables ingress storm admin state.ro Enumeration .1.3.6.1.4.1.248.11.31.1.3 |