HM2-PLATFORM-SFLOW-MIB
The HM2-PLATFORM-SFLOW-MIB enables monitoring of sFlow sampling parameters, flow export configurations, and traffic statistics on Hirschmann (Belden) Platform2 managed switches. It facilitates the collection of real-time network traffic data for performance analysis and capacity planning via the sFlow protocol.
Imported Objects
Objects
3 total| Object Name |
|---|
hm2PlatformSflowThe Hirschmann Private Platform2 MIB for SFlow. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.12.59 |
hm2AgentFastPathSflowObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.59.1 |
hm2AgentSflowSourceInterfaceA source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates source-interface is un-configured.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.12.59.1.1 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.