HM2-PLATFORM-RADIUS-MIB
AI MIB Summary
The HM2-PLATFORM-RADIUS-MIB enables monitoring and management of RADIUS authentication and accounting sessions on Hirschmann Private Platform2 network devices. It exposes specific metrics for tracking active user sessions, authentication success/failure counts, and accounting record generation events to facilitate access control auditing.
The Hirschmann Private Platform2 MIB for Client Radius Authentication and Accounting. Copyright (C) 2011-2013. All Rights Reserved.
Main OID:
hm2PlatformRadius.1.3.6.1.4.1.248.12.8
48
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
hm2PlatformRadiusThe Hirschmann Private Platform2 MIB for Client Radius Authentication and Accounting. Copyright (C) 2011-2013. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.12.8 |
hm2AgentRadiusConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.8.1 |
hm2AgentRadiusMaxTransmitMaximum number of retransmissions of a RADIUS request packetrw Unsigned32 .1.3.6.1.4.1.248.12.8.1.1 |
hm2AgentRadiusTimeoutTime out duration (in seconds) before packets are retransmitted.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.2 |
hm2AgentRadiusAccountingModeIdentifies if RADIUS accounting has been enabled or not.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.8.1.3 |
hm2AgentRadiusStatsClearWhen set to enable(1), all RADIUS statistics will be reset.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.8.1.4 |
hm2AgentRadiusAccountingIndexNextValidIndicates the next valid index into the hm2AgentRadiusAccountingConfigTable for creation. If no additional entries are allowed, this will be 0.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.248.12.8.1.5 |
hm2AgentRadiusAccountingConfigTableTable with information about RADIUS accounting server IP addresses, port numbers and shared secrets. Only one entry is supported at this time. SEQUENCE OF Hm2AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.248.12.8.1.6 |
hm2AgentRadiusAccountingConfigEntryEntry consisting of configuration data for a RADIUS accounting server. Hm2AgentRadiusAccountingConfigEntry .1.3.6.1.4.1.248.12.8.1.6.1 |
hm2AgentRadiusAccountingServerIndexUnique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by hm2AgentRadiusAccountingIndexNextValid. Integer32 .1.3.6.1.4.1.248.12.8.1.6.1.1 |
hm2AgentRadiusAccountingServerAddressThis object is deprecated in favour of hm2AgentRadiusAccountingServerAddr. IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.rwdeprecated InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.6.1.2 |
hm2AgentRadiusAccountingServerAddressTypeThis object is deprecated in favour of hm2AgentRadiusAccountingServerAddrType. IP Address Type of the configured RADIUS accounting server. This object cannot be changed after creation.rwdeprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.6.1.3 |
hm2AgentRadiusAccountingPortPort number for the RADIUS accounting server.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.6.1.4 |
hm2AgentRadiusAccountingSecretConfigured shared sercret for the RADIUS accounting server.rw DisplayString .1.3.6.1.4.1.248.12.8.1.6.1.5 |
hm2AgentRadiusAccountingStatusCreates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the hm2AgentRadiusAccountingIndexNextValid object. Rows creation using a different value for hm2AgentRadiusAccountingServerIndex will fail. active(1) - This entry is active. notInService(2) - This entry is administratively disabled. notReady(3) - DNS resolution of host name has failed. createAndGo(4) - Creates a new entry. createAndWait(5)- Creates a new entry. destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.8.1.6.1.6 |
hm2AgentRadiusAccountingServerNameConfigured identification name for the RADIUS accounting server.rw DisplayString .1.3.6.1.4.1.248.12.8.1.6.1.7 |
hm2AgentRadiusAccountingServerAddrTypeInet address type of the configured RADIUS accounting server. This object cannot be changed after creation.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.6.1.248 |
hm2AgentRadiusAccountingServerAddrInet address of the configured RADIUS accounting server. This object cannot be changed after creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.6.1.249 |
hm2AgentRadiusServerIndexNextValidIndicates the next valid index into the hm2AgentRadiusServerConfigTable for creation. If no additional entries are allowed, this will be 0.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.248.12.8.1.7 |
hm2AgentRadiusServerConfigTableTable with information about RADIUS authentication server IP addresses, port numbers and shared secrets. SEQUENCE OF Hm2AgentRadiusServerConfigEntry .1.3.6.1.4.1.248.12.8.1.8 |
hm2AgentRadiusServerConfigEntryEntry consisting of configuration data for a RADIUS authentication server. Hm2AgentRadiusServerConfigEntry .1.3.6.1.4.1.248.12.8.1.8.1 |
hm2AgentRadiusServerIndexUnique index of the configured RADIUS server Integer32 .1.3.6.1.4.1.248.12.8.1.8.1.1 |
hm2AgentRadiusServerAddressTypeThis object is deprecated in favour of hm2AgentRadiusServerInetAddrType. IP Address Type of the configured RADIUS server. This object cannot be changed after creation.rwdeprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.8.1.3 |
hm2AgentRadiusServerPortPort number for the RADIUS server.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.8.1.4 |
hm2AgentRadiusServerSecretConfigured shared sercret for the RADIUS server.rw DisplayString .1.3.6.1.4.1.248.12.8.1.8.1.5 |
hm2AgentRadiusServerPrimaryModeConfigure the RADIUS server to be the primary server. If there is any other server that is configured to be primary, that server is set to be a seconday server and this entry is set primary.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.8.1.8.1.6 |
hm2AgentRadiusServerCurrentModeIndicate if the RADIUS server is the current server in use for authentication.ro Enumeration .1.3.6.1.4.1.248.12.8.1.8.1.7 |
hm2AgentRadiusServerMsgAuthEnable or disable the message authenticator attribute for this RADIUS server.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.8.1.8.1.8 |
hm2AgentRadiusServerRowStatusCreates or destroys a RADIUS authentication server entry. During creation, the next available index is specified by the hm2AgentRadiusServerIndexNextValid object. Rows creation using a different value for hm2AgentRadiusServerIndex will fail. active(1) - This entry is active. notInService(2) - This entry is administratively disabled. notReady(3) - DNS resolution of host name has failed. createAndGo(4) - Creates a new entry. createAndWait(5)- Creates a new entry. destroy(6) - Deletes an entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.8.1.8.1.9 |
hm2AgentRadiusServerNameConfigured identification name for the RADIUS server.rw DisplayString .1.3.6.1.4.1.248.12.8.1.8.1.10 |
hm2AgentRadiusServerInetAddressThis object is deprecated in favour of hm2AgentRadiusServerInetAddr. IP Address of the configured RADIUS server. This object cannot be changed after creation.rwdeprecated InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.8.1.11 |
hm2AgentRadiusServerTimeoutTime out duration (in seconds) before packets are retransmitted. Note that hm2AgentRadiusTimeout will override this MIB object: - During row creation, hm2AgentRadiusTimeout specifies the default value. - Writing to hm2AgentRadiusTimeout will also update the value of this MIB object for all existing rows.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.8.1.12 |
hm2AgentRadiusServerRetransmitMaximum number of retransmissions of a RADIUS request packet Note that hm2AgentRadiusMaxTransmit will override this MIB object: - During row creation, hm2AgentRadiusMaxTransmit specifies the default value. - Writing to hm2AgentRadiusMaxTransmit will also update the value of this MIB object for all existing rows.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.8.1.13 |
hm2AgentRadiusServerDeadtimeLength of time (in minutes) for which a RADIUS server is skipped over by transaction requests. Note that hm2AgentRadiusDeadTime will override this MIB object: - During row creation, hm2AgentRadiusDeadTime specifies the default value. - Writing to hm2AgentRadiusDeadTime will also update the value of this MIB object for all existing rows.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.8.1.14 |
hm2AgentRadiusServerSourceIPAddrSource IP address that will be used for the communication with RADIUS servers. Note that hm2AgentRadiusSourceIPAddr will override this MIB object: - During row creation, hm2AgentRadiusSourceIPAddr specifies the default value. - Writing to hm2AgentRadiusSourceIPAddr will also update the value of this MIB object for all existing rows.rw IpAddress .1.3.6.1.4.1.248.12.8.1.8.1.15 |
hm2AgentRadiusServerPriorityPriority specifies the order in which the servers will be used, where 0 is the highest priority in radius server config mode.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.8.1.16 |
hm2AgentRadiusServerUsageTypeSpecify the usage type of the server.rw Enumeration .1.3.6.1.4.1.248.12.8.1.8.1.17 |
hm2AgentRadiusServerInetAddrTypeInet address type of the configured RADIUS server. This object cannot be changed after creation.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.8.1.248 |
hm2AgentRadiusServerInetAddrInet address of the configured RADIUS server. This object cannot be changed after creation.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.8.1.8.1.249 |
hm2AgentRadiusAuthenticationServersNumber of RADIUS authentication servers that have been configured.ro Unsigned32 .1.3.6.1.4.1.248.12.8.1.9 |
hm2AgentRadiusAccountingServersNumber of RADIUS accounting servers that have been configured.ro Unsigned32 .1.3.6.1.4.1.248.12.8.1.10 |
hm2AgentRadiusNamedAuthenticationServerGroupsNumber of configured RADIUS named authentication server groups.ro Unsigned32 .1.3.6.1.4.1.248.12.8.1.11 |
hm2AgentRadiusNamedAccountingServerGroupsNumber of configured RADIUS named accounting server groups.ro Unsigned32 .1.3.6.1.4.1.248.12.8.1.12 |
hm2AgentRadiusDeadTimeLength of time (in minutes) for which a RADIUS server is skipped over by transaction requests.rw Unsigned32 .1.3.6.1.4.1.248.12.8.1.13 |
hm2AgentRadiusSourceIPAddrSource IP address that will be used for the communication with RADIUS servers.rw IpAddress .1.3.6.1.4.1.248.12.8.1.15 |
hm2AgentRadiusNasIpAddressUsed to set the NAS-IP address for the radius server.rw IpAddress .1.3.6.1.4.1.248.12.8.1.16 |
hm2AgentAuthorizationNetworkRadiusModeUsed to enable/disable VLAN assignment mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.8.1.17 |
hm2AgentRadiusSourceInterfaceA source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface). A non-zero value indicates ifIndex for the corresponding interface entry in the ifTable is selected. A zero value indicates the source-interface un-selection. The frames will not necessarily be sent on this interface, only the IP address of the interface will be used as source.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.12.8.1.18 |