HM2-PLATFORM-LOOPBACK-MIB
The HM2-PLATFORM-LOOPBACK-MIB enables monitoring and management of loopback interface states, status, and statistics on Hirschmann (Belden) Platform2 network devices via SNMP. This module specifically tracks loopback interface operational status, administrative state, and associated traffic counters to facilitate connectivity verification and fault isolation.
Imported Objects
Objects
9 total| Object Name |
|---|
hm2PlatformLoopbackThe Hirschmann Platform2 MIB for Loopback Interfaces. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.12.22 |
hm2AgentLoopbackGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.22.1 |
hm2AgentLoopbackTableA summary table of the Loopback instances SEQUENCE OF Hm2AgentLoopbackEntry .1.3.6.1.4.1.248.12.22.1.1 |
hm2AgentLoopbackEntry. Hm2AgentLoopbackEntry .1.3.6.1.4.1.248.12.22.1.1.1 |
hm2AgentLoopbackIDThe Loopback ID is associated with Internal Interface number which will be generated when we create a loopback. Integer32 .1.3.6.1.4.1.248.12.22.1.1.1.1 |
hm2AgentLoopbackIfIndexThe Loopback ID is associated with an Internal Interface number which will be generated when we create a loopback.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.248.12.22.1.1.1.2 |
hm2AgentLoopbackIPAddressThe IP Address configured for the respective loopbackrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.22.1.1.1.3 |
hm2AgentLoopbackIPSubnetThe Subnet mask configured for the respective loopbackrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.22.1.1.1.4 |
hm2AgentLoopbackStatusStatus of this instance. The rows can be added/deleted in the table by setting createAndGo/createAndWait/destroy respectively active(1) - this loopback instance is active createAndGo(4) - set to this value to create an instance createAndWait(5) - set to this value to create an instance destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.22.1.1.1.5 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.