HM2-LOGGING-MIB
Hirschmann Logging MIB. Copyright (C) 2012. All Rights Reserved.
Main OID:
hm2LoggingMib.1.3.6.1.4.1.248.11.23
98
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
hm2LoggingMibHirschmann Logging MIB. Copyright (C) 2012. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.23 |
hm2LoggingMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.0 |
hm2LogAuditStartNextSectorA notification shall be sent when the audit trail has filled one sector and starts a new one. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.23.0.1 |
hm2LogEmailSendFailedWhenever a mail sending to the SMTP server is failed, this trap is sent with a count of how many times the connection to the SMTP server is failed so far. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.23.0.2 |
hm2LoggingMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1 |
hm2LogSnmpLoggingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.1 |
hm2LogSnmpLogGetRequestEnable logging of SNMP GET requests.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.1.1 |
hm2LogSnmpLogSetRequestEnable logging of SNMP SET requests.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.1.2 |
hm2LogSnmpLogGetSeverityDefine the log severity for SNMP GET requests.rw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.1.3 |
hm2LogSnmpLogSetSeverityDefine the log severity for SNMP SET requests.rw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.1.4 |
hm2LogCliCommandsLoggingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.2 |
hm2LogCliCommandsAdminStatusAdministratively enable/disable the logging of the CLI commands.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.2.1 |
hm2LogConsoleLoggingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.3 |
hm2LogConsoleAdminStatusAdmin mode for console logsrw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.3.1 |
hm2LogConsoleSeverityFilterSeverity filter for console logsrw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.3.2 |
hm2LogBufferedLoggingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.4 |
hm2LogBufferdLogLevelThresholdSeverities at or below this threshold are logged in the buffered log and will not be overwritten by lower priority log messages.rw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.4.1 |
hm2LogSyslogGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.5 |
hm2LogSyslogAdminStatusEnable or disable syslog logging globally.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.5.1 |
hm2LogSyslogClientTlsVersionsThe TLS versions supported by the syslog client.rw Hm2TlsVersions (HM2-MGMTACCESS-MIB) .1.3.6.1.4.1.248.11.23.1.5.2 |
hm2LogSyslogClientTlsCipherSuitesThe cipher suite supported by the syslog client.rw Hm2TlsCipherSuites (HM2-MGMTACCESS-MIB) .1.3.6.1.4.1.248.11.23.1.5.3 |
hm2LogSyslogServerTableA list of syslog servers SEQUENCE OF Hm2LogSyslogServerEntry .1.3.6.1.4.1.248.11.23.1.5.10 |
hm2LogSyslogServerEntryAn entry of syslog servers Hm2LogSyslogServerEntry .1.3.6.1.4.1.248.11.23.1.5.10.1 |
hm2LogSyslogServerIndexAn index that uniquely identifies the entry in the table and so the syslog server.ro Integer32 .1.3.6.1.4.1.248.11.23.1.5.10.1.1 |
hm2LogSyslogServerIPAddrTypeAddress type for server IP address. Currently, only ipv4(1) and dns(16) are supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.23.1.5.10.1.2 |
hm2LogSyslogServerIPAddrIP address of syslog server for logging.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.23.1.5.10.1.3 |
hm2LogSyslogServerUdpPortTCP or UDP port used for syslog server transmission. If this value is zero then the default port 514 is used.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.23.1.5.10.1.4 |
hm2LogSyslogServerLevelUptoUp to log level to be sent to this syslog server.rw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.5.10.1.5 |
hm2LogSyslogServerLogTypeDefines the type of log messages to be sent to the syslog server. systemlog (1): Define the system event log entries as stored also in the system event log. audittrail (2): Define the audit trail log entries.rw Enumeration .1.3.6.1.4.1.248.11.23.1.5.10.1.6 |
hm2LogSyslogServerRowStatusSyslog server entry status. active(1) - This syslog server is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) - Accept row values and activate. createAndWait(5)- Accept row values and wait. destroy(6) - Set to this value to remove this syslog server entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.23.1.5.10.1.7 |
hm2LogSyslogServerTransportTypeThe transport type used to deliver the log messages to the syslog server. When set to udp(1) the syslog messages are sent over UDP on the configured port. When set to tls(2) the syslog messages are sent over TLS on configured TCP port (hm2LogSyslogServerUdpPort).rw Enumeration .1.3.6.1.4.1.248.11.23.1.5.10.1.8 |
hm2LogPersistentGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.6 |
hm2LogPersistAdminStatusEnable or disable persistent logging globally.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.6.1 |
hm2LogPersistMaxFileSizeMaximum persistent logfile size on non-volatile medium in Kbytes (0..4096). If this value is zero logging is disabled.rw Integer32 .1.3.6.1.4.1.248.11.23.1.6.2 |
hm2LogPersistFilesMaxMaximum number of persistent logfiles on non-volatile medium (0..25). If this value is zero logging and archiving is disabled.rw Integer32 .1.3.6.1.4.1.248.11.23.1.6.3 |
hm2LogPersistLevelUptoUp to log level to be sent to the persistent logrw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.6.4 |
hm2LogPersistentFileTableA list of persistent log files SEQUENCE OF Hm2LogPersistentFileEntry .1.3.6.1.4.1.248.11.23.1.6.5 |
hm2LogPersistentFileEntryAn entry of persistent log files Hm2LogPersistentFileEntry .1.3.6.1.4.1.248.11.23.1.6.5.1 |
hm2LogPersistentFileIndexThe index of the table. Integer32 .1.3.6.1.4.1.248.11.23.1.6.5.1.1 |
hm2LogPersistentFileNameThe name of the log file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.23.1.6.5.1.2 |
hm2LogPersistentFileSizeThe size of the file in bytes.ro Integer32 .1.3.6.1.4.1.248.11.23.1.6.5.1.3 |
hm2LogCounterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.7 |
hm2LogCounterOperatingHoursCumulated uptime of the device in seconds.ro Integer32 .1.3.6.1.4.1.248.11.23.1.7.1 |
hm2LogCounterFlashTableA list of log counter entries SEQUENCE OF Hm2LogCounterFlashEntry .1.3.6.1.4.1.248.11.23.1.7.10 |
hm2LogCounterFlashEntryAn entry of log counter entries Hm2LogCounterFlashEntry .1.3.6.1.4.1.248.11.23.1.7.10.1 |
hm2LogCounterFlashBlockThe name of the flash region. Enumeration .1.3.6.1.4.1.248.11.23.1.7.10.1.1 |
hm2LogCounterFlashDescriptionThe textual description of the group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.23.1.7.10.1.2 |
hm2LogCounterFlashCountThe number of flash sectors in this group.ro Integer32 .1.3.6.1.4.1.248.11.23.1.7.10.1.3 |
hm2LogCounterFlashValueThe number of sector erase operations performed for this group.ro Integer32 .1.3.6.1.4.1.248.11.23.1.7.10.1.4 |
hm2LogTemperatureGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.8 |
hm2LogTempMinimumMinimal temperature on the device in 10th of centigrade (Celsius).ro Integer32 .1.3.6.1.4.1.248.11.23.1.8.1 |
hm2LogTempMaximumMaximal temperature on the device in 10th of centigrade (Celsius).ro Integer32 .1.3.6.1.4.1.248.11.23.1.8.2 |
hm2LogTempVariationCountNumber of variations (up or down) by minimum 20 centigrade (Celsius) in maximum one hour period.ro Integer32 .1.3.6.1.4.1.248.11.23.1.8.3 |
hm2LogTempHistTableA list of temperature ranges and how many hours the device has been in these ranges (histogram). SEQUENCE OF Hm2LogTempHistEntry .1.3.6.1.4.1.248.11.23.1.8.10 |
hm2LogTempHistEntryAn entry of temperature ranges and how many hours the device has been in these ranges (histogram). Hm2LogTempHistEntry .1.3.6.1.4.1.248.11.23.1.8.10.1 |
hm2LogTempHistIndexIndex Integer32 .1.3.6.1.4.1.248.11.23.1.8.10.1.1 |
hm2LogTempHistRangeMinThe lower bound of the range in 10th of centigrade (Celsius).ro Integer32 .1.3.6.1.4.1.248.11.23.1.8.10.1.2 |
hm2LogTempHistRangeMaxThe upper bound of the range in 10th of centigrade (Celsius).ro Integer32 .1.3.6.1.4.1.248.11.23.1.8.10.1.3 |
hm2LogTempHistTimeThe time spent in this range in minutes.ro Integer32 .1.3.6.1.4.1.248.11.23.1.8.10.1.4 |
hm2LogAuditGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.9 |
hm2LogAuditTrailCommentEnter a Comment to begin or end a group of entries in the audit trail. Returns an empty string when read.rw DisplayString .1.3.6.1.4.1.248.11.23.1.9.1 |
hm2LogEmailAlertGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.23.1.10 |
hm2LogEmailAdminStatusAdmin mode for logging email-alert.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.10.1 |
hm2LogEmailFromAddressMail address from which the mail has be sent.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.2 |
hm2LogEmailLogDurationPeriodic timer (in minutes) to send an email-alert.rw Integer32 .1.3.6.1.4.1.248.11.23.1.10.3 |
hm2LogEmailUrgentSeverityLog Severity at/below which the email-alert to be sent immediately.rw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.10.4 |
hm2LogEmailNonUrgentSeverityLog Severity at/below which the log should be saved in a buffer and sent as an email-alert later(In case of log duration timeout / log buffer overflow ).rw HmAgentLogSeverity .1.3.6.1.4.1.248.11.23.1.10.5 |
hm2LogEmailNumEmailsSentNumber of email alerts that have been sent successfully.ro Counter32 .1.3.6.1.4.1.248.11.23.1.10.6 |
hm2LogEmailNumEmailFailuresNumber of email alerts that could not be sent.ro Counter32 .1.3.6.1.4.1.248.11.23.1.10.7 |
hm2LogEmailTimeOfLastMailSentLocal system time (hm2SystemLocalTime) when the last mail was sent.ro HmTimeSeconds1970 (HM2-TC-MIB) .1.3.6.1.4.1.248.11.23.1.10.8 |
hm2LogEmailActionAfter configuring all email alert settings, set this object to 'test' to sendt a test message to the configured address(es). Setting the object to 'non-urgent' will force the device to immediately sent all buffered logs to the configured email server(s)/address(es). When read the object is read it always returns 'other'. The object can't be set as 'other'.rw Enumeration .1.3.6.1.4.1.248.11.23.1.10.9 |
hm2LogEmailTestMessageTypeMessage type for testing email alert functionality.rw Enumeration .1.3.6.1.4.1.248.11.23.1.10.10 |
hm2LogEmailTestMessageBodyMessage body for testing email alert functionality.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.11 |
hm2LogEmailToAddressTableThe table listing the destination email address and the message type. SEQUENCE OF Hm2LogEmailToAddressEntry .1.3.6.1.4.1.248.11.23.1.10.15 |
hm2LogEmailToAddressEntryThe table entry listing the destination email address and the message type. Hm2LogEmailToAddressEntry .1.3.6.1.4.1.248.11.23.1.10.15.1 |
hm2LogEmailToAddrMessageIndexAn integer used only for indexing purposes. Generally monotonically increasing from 1 as new addresses are configured. Re-use of values for this index should be avoided. Integer32 .1.3.6.1.4.1.248.11.23.1.10.15.1.1 |
hm2LogEmailToAddrMessageTypeLog message type.rw Enumeration .1.3.6.1.4.1.248.11.23.1.10.15.1.2 |
hm2LogEmailToAddrAddressEmail address to which the email-alert to be sent.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.15.1.3 |
hm2LogEmailToAddrEntryStatusCreate, change or delete the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.23.1.10.15.1.4 |
hm2LogEmailSubjectTableList of subject of the email for particular message type. SEQUENCE OF Hm2LogEmailSubjectEntry .1.3.6.1.4.1.248.11.23.1.10.16 |
hm2LogEmailSubjectEntryThis entry shows what kind of subject to be used for the given message type. Hm2LogEmailSubjectEntry .1.3.6.1.4.1.248.11.23.1.10.16.1 |
hm2LogEmailSubjectMessageTypeLog message Type Enumeration .1.3.6.1.4.1.248.11.23.1.10.16.1.1 |
hm2LogEmailSubjectEmail subject for given message type.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.16.1.2 |
hm2LogEmailSubjectEntryStatusCreate, change or delete the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.23.1.10.16.1.3 |
hm2LogEmailMailServerTableThe (conceptual) table listing the mail servers. SEQUENCE OF Hm2LogEmailMailServerEntry .1.3.6.1.4.1.248.11.23.1.10.17 |
hm2LogEmailMailServerEntryThis entry shows the conmfiguration for the mail server(s). Hm2LogEmailMailServerEntry .1.3.6.1.4.1.248.11.23.1.10.17.1 |
hm2LogEmailSmtpAddrIndexAn integer used only for indexing purposes. Re-use of values for this index is allowed. Integer32 .1.3.6.1.4.1.248.11.23.1.10.17.1.1 |
hm2LogEmailSmtpAddrDescrThe description of the server configured.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.17.1.2 |
hm2LogEmailSmtpAddrTypeEmail SMTP address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.23.1.10.17.1.3 |
hm2LogEmailSmtpAddrSMTP server address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.23.1.10.17.1.4 |
hm2LogEmailSmtpPortSMTP port number. When this object is set to 0, it resets to factory default port number 25.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.23.1.10.17.1.5 |
hm2LogEmailSmtpSecurityThis is the authentication mechanism that should be used.rw Enumeration .1.3.6.1.4.1.248.11.23.1.10.17.1.6 |
hm2LogEmailSmtpLoginIDThis user id is used while the switch/router is being authenticated by the SMTP server, if the hm2LogEmailSmtpSecurity is configured to 'tlsv1'.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.17.1.7 |
hm2LogEmailSmtpPasswordThis password is used while the switch/router is being authenticated by the SMTP server, if the hm2LogEmailSmtpSecurity is configured to 'tlsv1'.rw SnmpAdminString .1.3.6.1.4.1.248.11.23.1.10.17.1.8 |
hm2LogEmailSmtpEntryStatusCreate, change or delete the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.23.1.10.17.1.9 |
hm2LogEmailSmtpTimeoutTime out duration (in seconds) before packets are retransmitted.rw Unsigned32 .1.3.6.1.4.1.248.11.23.1.10.17.1.10 |
hm2LogEmailClientTlsVersionsThe TLS version supported by the email-alert logging client.rw Hm2TlsVersions (HM2-MGMTACCESS-MIB) .1.3.6.1.4.1.248.11.23.1.10.18 |
hm2LogEmailClientTlsCipherSuitesThe cipher suite supported by the email-alert logging client.rw Hm2TlsCipherSuites (HM2-MGMTACCESS-MIB) .1.3.6.1.4.1.248.11.23.1.10.19 |