HM2-LLDP-MIB
Imported Objects
Objects
8 total| Object Name |
|---|
hm2LLDPMibHirschmann LLDP MIB. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.34 |
hm2LLDPMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.34.1 |
hm2LLDPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.34.1.1 |
hm2LLDPAdminStatusEnable/Disable LLDP operation. A (1) enables, a (2) disables.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.34.1.1.1 |
hm2LLDPIfTableThis table contains variables for each interface of the switch. SEQUENCE OF Hm2LLDPIfEntry .1.3.6.1.4.1.248.11.34.1.1.2 |
hm2LLDPIfEntryThe entry of the hmLLDPInterfaceTable. Hm2LLDPIfEntry .1.3.6.1.4.1.248.11.34.1.1.2.1 |
hm2LLDPIfMaxNeighborsConfigure Hirschmann LLDP on this physical port. This value limits the number of entries in the remTable for this port.rw Integer32 .1.3.6.1.4.1.248.11.34.1.1.2.1.1 |
hm2LLDPIfFDBModeIf configured to lldpOnly(1), only received LLDP messages will be used to populate the LLDP-MIB's remTable. If configured to macOnly(2), a learned mac addresses out of the switch's forwarding database (FDB) will be used to populate the LLDP-MIB's remTable. A learned mac address will only be used when exactly one mac address entry is present in the FDB for the interface. If configured to both(3), both received LLDP messages and a learned mac addresses out of the switch's FDB will be used to populate the LLDP-MIB's remTable. If configured to autoDetect(4) and LLDP messages are received on this port, this mode will behave like lldpOnly(1), otherwise it will behave like macOnly(2).rw Enumeration .1.3.6.1.4.1.248.11.34.1.1.2.1.2 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.