HM2-L2REDUNDANCY-DLR-MIB
AI MIB Summary
The HM2-L2REDUNDANCY-DLR-MIB enables monitoring and management of Hirschmann Layer 2 Redundancy (DLR) protocol states, ring topology health, and redundancy transition events on supported industrial Ethernet switches. This module provides specific counters and status indicators for DLR ring membership, master/slave roles, and fault detection mechanisms to ensure continuous network availability.
Hirschmann Layer 2 Redundancy DLR MIB. Copyright (C) 2014. All Rights Reserved.
Main OID:
hm2DlrMibGroup.1.3.6.1.4.1.248.11.40.1.5
67
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
67 total| Object Name |
|---|
hm2DlrMibGroupHirschmann Layer 2 Redundancy DLR MIB. Copyright (C) 2014. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.40.1.5 |
hm2DlrMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.40.1.5.0 |
hm2DlrRingStatusTrapThis trap is sent when the network status changes. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.40.1.5.0.1 |
hm2DlrMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.40.1.5.1 |
hm2DlrConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.40.1.5.1.1 |
hm2DlrGlobalAdminStateEnable or disable DLR globally.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.1 |
hm2DlrConfigTableDLR configuration parameters table. SEQUENCE OF Hm2DlrConfigEntry .1.3.6.1.4.1.248.11.40.1.5.1.1.10 |
hm2DlrConfigEntryEntry for DLR configuration parameters. Hm2DlrConfigEntry .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1 |
hm2DlrRingIndexDLR ring index.ro Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.1 |
hm2DlrRingNameA logical name for the DLR ring to ease the management of DLR rings.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.2 |
hm2DlrRingport1IfIndexInterface index of the ringport 1 in the DLR ring. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.3 |
hm2DlrRingport2IfIndexInterface index of the ringport 2 in the DLR ring. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.4 |
hm2DlrRingport1OperStatusOperational status of ringport 1.ro Hm2DlrPortStatusType .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.5 |
hm2DlrRingport2OperStatusOperational status of ringport 2.ro Hm2DlrPortStatusType .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.6 |
hm2DlrSupervisorAdminStateEnable or disable the supervisor function. enable(1) indicates the device is configured as a ring supervisor. disable(2) indicates the device is configured as a normal ring node.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.7 |
hm2DlrSupervisorPrecedencePrecedence of the ring supervisor. Numerically higher value indicates higher precedence.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.8 |
hm2DlrBeaconIntervalBeacon interval time in microseconds.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.9 |
hm2DlrBeaconTimeoutBeacon timeout in microseconds. The Beacon Timeout shall be at least two times the Beacon Interval value.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10 |
hm2DlrVLANIDVLAN ID to use in the DLR protocol messages.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.11 |
hm2DlrServiceDLR specific services. noService(0) will be returned when reading this attribute. verifyFaultLocation(1) causes the supervisor to verify fault location. clearRapidFaults(2) clears the Rapid Fault condition in the supervisor, allowing the supervisor to return to normal operation. restartSignOn(3) restarts the Sign On process and refreshes the participants list. clearGatewayPartialFault(4) clears the partial network fault condition in the gateway, allowing the gateway to return to normal operation. clearGatewayPartialFault(4) is only supported if device is capable of the gateway.rw Enumeration .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.12 |
hm2DlrConfigRowStatusDescribes the status of a row in the table. Supports creation, deletion and activation of rows. A row must not be active(1) in order to be modified. A row can be taken out of service by setting the value notInService(2).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.15 |
hm2DlrGatewayConfigTableGateway settings table. SEQUENCE OF Hm2DlrGatewayConfigEntry .1.3.6.1.4.1.248.11.40.1.5.1.1.11 |
hm2DlrGatewayConfigEntryEntry with DLR gateway settings for the indexed ring. Hm2DlrGatewayConfigEntry .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1 |
hm2DlrGatewayIndexDLR gateway index.ro Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.1 |
hm2DlrGatewayNameA logical name for the DLR gateway to ease the management of DLR gateways.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.2 |
hm2DlrGatewayConfigLearningUpdateEnable or disable DLR gateway learning update. enable(1) indicates all DLR nodes will send Learning_Update frame after gateway switchover. disable(2) indicates DLR nodes will not send Learning_Update frame after gateway switchover.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.3 |
hm2DlrGatewayConfigPrecedencePrecedence of the DLR gateway.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.4 |
hm2DlrGatewayConfigAdvertiseIntervalGateway advertise interval time in microseconds.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.5 |
hm2DlrGatewayConfigAdvertiseTimeoutGateway advertise timeout in microseconds.rw Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.6 |
hm2DlrGatewayConfigUplinkPort1IfIndexInterface index of the uplink port 1 of the DLR gateway. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.7 |
hm2DlrGatewayConfigUplinkPort2IfIndexInterface index of the uplink port 2 of the DLR gateway. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.8 |
hm2DlrGatewayUplinkPort1OperStatusOperational status of the gateway uplink port 1.ro Hm2DlrPortStatusType .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.9 |
hm2DlrGatewayUplinkPort2OperStatusOperational status of the gateway uplink port 2.ro Hm2DlrPortStatusType .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.10 |
hm2DlrGatewayConfigRowStatusDescribes the status of a row in the table. Supports creation, deletion and activation of rows. A row must not be active(1) in order to be modified. A row can be taken out of service by setting the value notInService(2).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.15 |
hm2DlrStatus OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.40.1.5.1.2 |
hm2DlrStatusTableDLR runtime status table. SEQUENCE OF Hm2DlrStatusEntry .1.3.6.1.4.1.248.11.40.1.5.1.2.1 |
hm2DlrStatusEntryDLR runtime status entry. Hm2DlrStatusEntry .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1 |
hm2DlrCapabilityFlagsDLR device capabilities.ro Bits .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.1 |
hm2DlrDeviceOperStatusOperational status of the device in the DLR ring.ro Hm2DlrRingDeviceStatusType .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.2 |
hm2DlrNetworkTopologyCurrent network topology mode.ro Hm2DlrNetworkTopologyType .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.3 |
hm2DlrNetworkStatusCurrent network status.ro Hm2DlrNetworkStatusType .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.4 |
hm2DlrLastNetworkStatusChangeThe time in seconds since the network status has changed at last.ro Hm2DlrTimeInterval UNITS "seconds" .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.5 |
hm2DlrRingParticipantsCountNumber of devices in the ring protocol participiants list.ro Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.6 |
hm2DlrActiveSupervisorIpAddressTypeAddress type of hm2DlrActiveSupervisorIpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.7 |
hm2DlrActiveSupervisorIpAddressIP address of the active ring supervisor.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.8 |
hm2DlrActiveSupervisorMacAddressMAC address of the active ring supervisor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.9 |
hm2DlrActiveSupervisorPrecedencePrecedence value of the active ring supervisor.ro Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.10 |
hm2DlrRingFaultsCountNumber of times since the supervisor has started, that the device has detected a ring fault, as either active or backup supervisor.ro Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.11 |
hm2DlrLastActiveNodePort1IpAddressTypeAddress type of hm2DlrLastActiveNodePort1IpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.12 |
hm2DlrLastActiveNodePort1IpAddressIP address of last active node on port 1.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.13 |
hm2DlrLastActiveNodePort1MacAddressMAC address of last active node on port 1.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.14 |
hm2DlrLastActiveNodePort2IpAddressTypeAddress type of hm2DlrLastActiveNodePort2IpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.15 |
hm2DlrLastActiveNodePort2IpAddressIP address of last active node on port 2.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.16 |
hm2DlrLastActiveNodePort2MacAddressMAC address of last active node on port 2.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.17 |
hm2DlrRingParticipantsTableDLR ring participants table. SEQUENCE OF Hm2DlrRingParticipantsEntry .1.3.6.1.4.1.248.11.40.1.5.1.2.2 |
hm2DlrRingParticipantsEntryList of devices participating in the ring protocol. Hm2DlrRingParticipantsEntry .1.3.6.1.4.1.248.11.40.1.5.1.2.2.1 |
hm2DlrRingParticipantsIndexIndex for the ring participants table. Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.1 |
hm2DlrRingParticipantsIpAddressTypeAddress type of hm2DlrRingParticipantsIpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.2 |
hm2DlrRingParticipantsIpAddressIP address of the participant node.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.3 |
hm2DlrRingParticipantsMacAddressMAC address of the participant node.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.4 |
hm2DlrGatewayStatusTableDLR gateway status table. SEQUENCE OF Hm2DlrGatewayStatusEntry .1.3.6.1.4.1.248.11.40.1.5.1.2.3 |
hm2DlrGatewayStatusEntryDLR gateway status information entry. Hm2DlrGatewayStatusEntry .1.3.6.1.4.1.248.11.40.1.5.1.2.3.1 |
hm2DlrGatewayStatusGateway status.ro Hm2DlrGatewayStatusType .1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.1 |
hm2DlrGatewayStatusPrecedencePrecedence value of the active gateway.ro Unsigned32 .1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.2 |
hm2DlrGatewayStatusIpAddressTypeAddress type of hm2DlrGatewayStatusIpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.3 |
hm2DlrGatewayStatusIpAddressIP address of the active gateway.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.4 |
hm2DlrGatewayStatusMacAddressMAC address of the active gateway.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.11.40.1.5.1.2.3.1.5 |