HM2-L2FORWARDING-MIB
The HM2-L2FORWARDING-MIB enables monitoring and configuration of Layer 2 forwarding tables, MAC address tables, and VLAN parameters on Hirschmann (Belden) managed Ethernet switches. This module provides access to critical switching metrics including MAC learning counts, aging timers, and port-based forwarding states to facilitate troubleshooting of broadcast domains and loop prevention mechanisms.
Imported Objects
Objects
15 total| Object Name |
|---|
hm2L2ForwardingMibHirschmann L2 Forwarding MIB. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.30 |
hm2L2ForwardingMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.30.0 |
hm2L2ForwardingMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.30.1 |
hm2L2ForwGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.30.1.1 |
hm2L2VlanUnawareModeAdminStatusEnables or disables VLAN unaware mode for the switch unit.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.30.1.1.1 |
hm2L2VlanUnawareModeOperStatusShows if VLAN unaware mode for the switch unit is enables or disables.ro HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.30.1.1.2 |
hm2L2ForwClassOfServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.30.1.2 |
hm2TrafficClassTableA table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)). SEQUENCE OF Hm2TrafficClassEntry .1.3.6.1.4.1.248.11.30.1.2.1 |
hm2TrafficClassEntryUser Priority to Traffic Class mapping. Hm2TrafficClassEntry .1.3.6.1.4.1.248.11.30.1.2.1.1 |
hm2TrafficClassPriorityThe Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. Integer32 .1.3.6.1.4.1.248.11.30.1.2.1.1.1 |
hm2TrafficClassThe Traffic Class the received frame is mapped to.rw Integer32 .1.3.6.1.4.1.248.11.30.1.2.1.1.2 |
hm2CosMapIpDscpTableA table mapping evaluated IP DSCP to Traffic Class for a specific physical port. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)). SEQUENCE OF Hm2CosMapIpDscpEntry .1.3.6.1.4.1.248.11.30.1.2.2 |
hm2CosMapIpDscpEntryIP DSCP to Traffic Class mapping for a port. Hm2CosMapIpDscpEntry .1.3.6.1.4.1.248.11.30.1.2.2.1 |
hm2CosMapIpDscpValueThe IP DSCP value contained in the received frame. This value is only indicated in IP packets, but is independent of both media-type and frame tagging. Non-IP packets are handled in accordance with the dot1dPortDefaultUserPriority value of the ingress port. Unsigned32 .1.3.6.1.4.1.248.11.30.1.2.2.1.1 |
hm2CosMapIpDscpTrafficClassTraffic class priority queue the received frame is mapped to.rw Unsigned32 .1.3.6.1.4.1.248.11.30.1.2.2.1.2 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.