HM2-INDUSTRIAL-PROTOCOLS-MIB
AI MIB Summary
The HM2-INDUSTRIAL-PROTOCOLS-MIB enables monitoring and management of Hirschmann industrial network devices, specifically exposing metrics for proprietary industrial protocol sessions, link status, and device health parameters. This module facilitates the tracking of protocol-specific events and operational states required for maintaining reliability in industrial automation environments.
Hirschmann Industrial Protocols MIB. Copyright (C) 2013. All Rights Reserved.
Main OID:
hm2IndustrialProtocolsMib.1.3.6.1.4.1.248.11.101
84
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
84 total| Object Name |
|---|
hm2IndustrialProtocolsMibHirschmann Industrial Protocols MIB. Copyright (C) 2013. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.101 |
hm2IndustrialProtocolsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.0 |
hm2IndustrialProtocolsMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1 |
hm2Iec61850Group OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.1 |
hm2Iec61850ConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.1.1 |
hm2Iec61850MmsServerAdminStatusEnables/disables the IEC61850 MMS server functionality on this device. If disabled(2), the IEC61850 MMS Server is deactivated, but the IEC61850 MIBs can be accessed. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.1.1.1 |
hm2Iec61850MmsServerWriteAccessStatusEnables/disables the read/write capability of the IEC61850 MMS. If disabled(2), the IEC61850 MMS Server is accessible read-only, if enabled(1) the device configuration can be changed using the IEC61850 MMS protocol. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.1.1.2 |
hm2Iec61850MmsServerPortNumberThe port number of the IEC61850 MMS server. Setting the port to zero is not allowed.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.101.1.1.1.3 |
hm2Iec61850MmsServerMaxSessionsCountMax number of IEC61850 MMS sessions permitted on this switch.rw Integer32 .1.3.6.1.4.1.248.11.101.1.1.1.4 |
hm2Iec61850MmsServerTechnicalKeyThe IEC61850 MMS server technical key setting corresponds to the IEC61850 IED name. This name is used to identify the device via a IEC61850 MMS client. The size is restricted to 32 characters. According to IEC61850-7-2 Ed. the TechnicalKey represents an IEC61850 VisibleString. Thus the following characters are allowed: VisibleString ( FROM ('A'|'a'|'B'|'b'|'C'|'c'|'D'|'d'|'E'|'e'|'F'|'f'| 'G'|'g'|'H'|'h'|'I'|'i'|'J'|'j'|'K'|'k'|'L'|'l'| 'M'|'m'|'N'|'n'|'O'|'o'|'P'|'p'|'Q'|'q'|'R'|'r'| 'S'|'s'|'T'|'t'|'U'|'u'|'V'|'v'|'W'|'w'|'X'|'x'| 'Y'|'y'|'Z'|'z'|'_'|'0'|'1'|'2'|'3'|'4'|'5'|'6'| '7'|'8'|'9') )rw SnmpAdminString .1.3.6.1.4.1.248.11.101.1.1.1.5 |
hm2Iec61850MmsTlsServerAdminStatusEnables/disables the IEC61850 MMS over TLS server functionality on this device. If disabled(2), the IEC61850 MMS over TLS Server is deactivated, but the IEC61850 MIBs can be accessed. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.1.1.10 |
hm2Iec61850MmsTlsServerWriteAccessStatusEnables/disables the read/write capability of the IEC61850 MMS. If disabled(2), the IEC61850 MMS over TLS Server is accessible read-only, if enabled(1) the device configuration can be changed using the IEC61850 MMS over TLS protocol. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.1.1.11 |
hm2Iec61850MmsTlsServerPortNumberThe port number of the IEC61850 MMS over TLS server. Setting the port to zero is not allowed.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.101.1.1.1.12 |
hm2Iec61850MmsTlsServerMaxSessionsCountMax number of IEC61850 MMS over TLS sessions permitted on this switch.rw Integer32 .1.3.6.1.4.1.248.11.101.1.1.1.13 |
hm2Iec61850MmsTlsServerKeysPresentIndicates what key files are present on the device, if any.ro Enumeration .1.3.6.1.4.1.248.11.101.1.1.1.20 |
hm2Iec61850MmsTlsServerKeyOperStatusIndicates what key files are currently being generated or deleted, if any.ro Enumeration .1.3.6.1.4.1.248.11.101.1.1.1.21 |
hm2Iec61850MmsTlsServerRSAKeyControlControls RSA key generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.248.11.101.1.1.1.22 |
hm2Iec61850MmsTlsServerDSAKeyControlControls DSA key generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.248.11.101.1.1.1.23 |
hm2Iec61850MmsTlsServerFingerPrintDSAThe local DSA fingerprint for IEC61850 MMS over TLS connections.ro DisplayString .1.3.6.1.4.1.248.11.101.1.1.1.24 |
hm2Iec61850MmsTlsServerFingerPrintRSAThe local RSA fingerprint for IEC61850 MMS over TLS connections.ro DisplayString .1.3.6.1.4.1.248.11.101.1.1.1.25 |
hm2Iec61850MmsServerStatusReturns current MMS server status. As the MMS server takes a long time to start or to stop, this will return the actual server state, not just if it is enabled or disabled. If the value is unavailable(1) then the feature is not available on the device.ro Enumeration .1.3.6.1.4.1.248.11.101.1.1.1.26 |
hm2Iec61850StatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.1.2 |
hm2Iec61850MmsServerSessionsCountCurrent number of active IEC61850 MMS sessions on this switch.ro Integer32 .1.3.6.1.4.1.248.11.101.1.1.2.1 |
hm2Iec61850MmsTlsServerSessionsCountCurrent number of active IEC61850 MMS over TLS sessions on this switch.ro Integer32 .1.3.6.1.4.1.248.11.101.1.1.2.10 |
hm2ProfinetIOGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.2 |
hm2ProfinetIOConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.2.1 |
hm2PNIOAdminStatusEnables/disables the ProfinetIO functionality on this device. If disabled(2), the ProfinetIO protocol is inactive, but the ProfinetIO MIBs can be accessed. The default value is disabled.rw Enumeration .1.3.6.1.4.1.248.11.101.1.2.1.1 |
hm2PNIODeviceIDIdentifier of the device family. Values 1 .. 65635 are valid device IDs.ro Integer32 .1.3.6.1.4.1.248.11.101.1.2.1.2 |
hm2PNIOModuleIdentNumberIdentifier ID of the device of port or module.ro Integer32 .1.3.6.1.4.1.248.11.101.1.2.1.3 |
hm2PNIOOrderIDProduct (switch) order ID. The size is restricted to 64 characters.ro DisplayString .1.3.6.1.4.1.248.11.101.1.2.1.4 |
hm2PNIODeviceTypeDetailsSwitch device type details, for example: 4 Port Rail Switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.101.1.2.1.5 |
hm2PNIOSoftwareReleaseThis value is a string that contains Version number of software in profinetio format, for example: 01.0.03.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.101.1.2.1.6 |
hm2PNIOHardwareReleaseVersion number of switch hardware in profinetio format.ro Integer32 .1.3.6.1.4.1.248.11.101.1.2.1.7 |
hm2PNIOOrderID9thProduct (switch) order ID. The size is restricted to 32 characters (In the form of the 9-th numbers).ro DisplayString .1.3.6.1.4.1.248.11.101.1.2.1.8 |
hm2PNIONameOfStationDevice name. The size is restricted to 240 characters. It must be conform to the restrictions as decribed in PNIO protocol specification.rw DisplayString .1.3.6.1.4.1.248.11.101.1.2.1.9 |
hm2PNIONumActiveApplicationRelationsReturns the number of active application relations.ro Unsigned32 .1.3.6.1.4.1.248.11.101.1.2.1.10 |
hm2PNIOClearIpParameterClears the IP parameters if set to true and PNIO is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.101.1.2.1.11 |
hm2PNIODcpModeTableTable of DCP mode entries SEQUENCE OF Hm2PNIODcpModeEntry .1.3.6.1.4.1.248.11.101.1.2.1.20 |
hm2PNIODcpModeEntryDCP mode entry Hm2PNIODcpModeEntry .1.3.6.1.4.1.248.11.101.1.2.1.20.1 |
hm2PNIODcpModePortIDPort ID for the DCP mode table entry Integer32 .1.3.6.1.4.1.248.11.101.1.2.1.20.1.1 |
hm2PNIODcpModeDCP mode for one port. Allowed values none(0), ingress(1), egress(2) or both(3) which is default.rw Enumeration .1.3.6.1.4.1.248.11.101.1.2.1.20.1.2 |
hm2ProfinetIOStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.2.2 |
hm2EthernetIPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.3 |
hm2EthernetIPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.3.1 |
hm2EtherNetIPAdminStatusEnables/disables the EtherNet/IP(TM) operation on this device. If disabled, the EtherNet/IP protocol is deactivated, but the EtherNet/IP MIBs can be accessed. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.3.1.1 |
hm2EtherNetIPErrorCodeRead the error code within EtherNet/IP(TM) action.ro Integer32 .1.3.6.1.4.1.248.11.101.1.3.1.2 |
hm2EtherNetIPProductCodeRead the Product Code as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 65635 are valid product codes.ro Integer32 .1.3.6.1.4.1.248.11.101.1.3.1.3 |
hm2EtherNetIPMajorRevisionRead the major revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions.ro Integer32 .1.3.6.1.4.1.248.11.101.1.3.1.4 |
hm2EtherNetIPMinorRevisionRead the minor revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions.ro Integer32 .1.3.6.1.4.1.248.11.101.1.3.1.5 |
hm2EtherNetIPProductNameRead the product name as shown in the Identity Object of EtherNet/IP(TM). The size is restricted to 32 Characters.ro SnmpAdminString .1.3.6.1.4.1.248.11.101.1.3.1.6 |
hm2EtherNetIPCatalogNameRead the catolog name as provided in the EDS file for EtherNet/IP(TM). The size is restricted to 255 Characters.ro SnmpAdminString .1.3.6.1.4.1.248.11.101.1.3.1.7 |
hm2EtherNetIPWriteAccessStatusEnables/disables the read/write capability of the EtherNet/IP protocol. If disabled(2), the EtherNet/IP protocol is accessible the get requests only, if enabled(1), the EtherNet/IP protocol is accessible the set/get requests, The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.3.1.8 |
hm2EthernetIPStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.3.2 |
hm2EtherNetIPConnEstablishedStatistics: number of connections that have been established within EtherNet/IP.ro Unsigned32 .1.3.6.1.4.1.248.11.101.1.3.2.1 |
hm2EtherNetIPConnTimeoutsStatistics: number of connection timeouts that have been occurred within EtherNet/IP.ro Unsigned32 .1.3.6.1.4.1.248.11.101.1.3.2.2 |
hm2EtherNetIPVendorObjRequestsStatistics: number of requests to the vendor specific objects within EtherNet/IP.ro Unsigned32 .1.3.6.1.4.1.248.11.101.1.3.2.3 |
hm2EthernetIPTCPIPObjectGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.3.3 |
hm2EtherNetIPMcastTTLValueTime-to-Live value for IP multicast packets.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.3.1 |
hm2EtherNetIPMcastAllocControlControls how the device shall allocate IP multicast addresses. A value of 0 means multicast addresses shall be generated using the default allocation algorithm. A value of 1 means multicast addresses shall be allocated according to the values specified in Num Mcast and Mcast Start Addr. The value 2 is reserved.rw Enumeration .1.3.6.1.4.1.248.11.101.1.3.3.2 |
hm2EtherNetIPMcastCountThe maximum number of IP multicast addresses to be allocated.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.3.3 |
hm2EtherNetIPMcastStartAddressThe starting multicast address from which Num Mcast addresses are allocated.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.101.1.3.3.4 |
hm2EtherNetIPLastConflictDetectedACDActivityThe ARP Response PDU (a copy of the ARP message that caused the address conflict) in binary format. Can only be written to a value of zero.rw OCTET STRING .1.3.6.1.4.1.248.11.101.1.3.3.5 |
hm2EtherNetIPSelectACDStatusSets the status of the ip address conflict detection mechanism on this device. The new value of this element is applied after the device executes a restart.rw Enumeration .1.3.6.1.4.1.248.11.101.1.3.3.6 |
hm2EthernetIPQoSObjectGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.3.4 |
hm2EtherNetIPQosDscpUrgentValueDSCP value for CIP transport Urgent priority messages.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.4.1 |
hm2EtherNetIPQosDscpScheduledValueDSCP value for CIP transport Scheduled priority messages.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.4.2 |
hm2EtherNetIPQosDscpHighValueDSCP value for CIP transport High priority messages.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.4.3 |
hm2EtherNetIPQosDscpLowValueDSCP value for CIP transport Low priority messages.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.4.4 |
hm2EtherNetIPQosDscpExplicitValueDSCP value for CIP transport Explicit priority messages.rw Integer32 .1.3.6.1.4.1.248.11.101.1.3.4.5 |
hm2EtherNetIPQosValueThis object indicates a changes which be applied after the device executes a restart.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.101.1.3.4.6 |
hm2ModbusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.4 |
hm2ModbusConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.4.1 |
hm2ModbusTcpServerAdminStatusEnables/disables the Modbus TCP server functionality on this device. If disabled(2), the Modbus TCP Server is deactivated, but the Modbus MIBs can be accessed. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.4.1.1 |
hm2ModbusTcpServerWriteAccessStatusEnables/disables the read/write capability of the Modbus TCP server. If disabled(2), the Modbus TCP Server is accessible read-only, if enabled(1) the device configuration can be changed using the Modbus TCP protocol. The default value is disabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.101.1.4.1.2 |
hm2ModbusTcpServerPortNumberThe port number of the Modbus TCP server. Setting the port to zero is not allowed.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.101.1.4.1.3 |
hm2ModbusTcpServerMaxSessionsCountMaximum number of concurrent sessions allowed by the Modbus TCP server.rw Integer32 .1.3.6.1.4.1.248.11.101.1.4.1.4 |
hm2ModbusStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.1.4.2 |
hm2ModbusTcpServerSessionsCountCurrent number of active sessions to the Modbus TCP server.ro Integer32 .1.3.6.1.4.1.248.11.101.1.4.2.1 |
hm2IndustrialProtocolsMibSNMPExtensionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.3 |
hm2Iec61850SESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.3.1 |
hm2ProfinetIOSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.3.2 |
hm2ProfinetIOInvalidStationNameInvalid station name. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.3.2.1 |
hm2EthernetIPSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.3.3 |
hm2ModbusSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.101.3.4 |