HM2-FILEMGMT-MIB
AI MIB Summary
The HM2-FILEMGMT-MIB module enables the monitoring and management of file system operations, including file creation, deletion, and modification, on Hirschmann (Belden) network switches. It exposes specific metrics for file system usage, directory structures, and file access events to facilitate storage administration and audit compliance.
Hirschmann File Management MIB. Copyright (C) 2011. All Rights Reserved.
Main OID:
hm2FileMgmtMib.1.3.6.1.4.1.248.11.21
71
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
hm2FileMgmtMibHirschmann File Management MIB. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.21 |
hm2FileMgmtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.0 |
hm2ConfigurationSavedTrapThis trap is sent after the configuration of the agent was successfully saved. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.21.0.1 |
hm2ConfigurationChangedTrapThis trap is sent if there is a change in the synchronization status between currently running and the saved configuration so that the value of hm2FMNvmState changes. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.21.0.2 |
hm2FileMgmtMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1 |
hm2FileMgmtProfileGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.1 |
hm2FMProfileTableA list of profiles stored in NV memory. SEQUENCE OF Hm2FMProfileEntry .1.3.6.1.4.1.248.11.21.1.1.1 |
hm2FMProfileEntryA profile entry. Hm2FMProfileEntry .1.3.6.1.4.1.248.11.21.1.1.1.1 |
hm2FMProfileStorageTypeType of storage of the profile entry.ro Enumeration .1.3.6.1.4.1.248.11.21.1.1.1.1.1 |
hm2FMProfileIndexIndex of the profile entry.ro Integer32 .1.3.6.1.4.1.248.11.21.1.1.1.1.2 |
hm2FMProfileNameName of the entry consisting of alphanumeric characters plus hyphen and underscore.ro DisplayString .1.3.6.1.4.1.248.11.21.1.1.1.1.3 |
hm2FMProfileDateTimeTime and date of last write access using the content of the variable hm2SystemTime.ro HmTimeSeconds1970 (HM2-TC-MIB) .1.3.6.1.4.1.248.11.21.1.1.1.1.4 |
hm2FMProfileActiveSetting the variable to active(1) enables the profile so that it will be used the next time the configuration is reloaded. Setting the value to inactive(2) is not allowed since there must be always at least one profile with the state set to active(1).rw Enumeration .1.3.6.1.4.1.248.11.21.1.1.1.1.5 |
hm2FMProfileActionAction to be performed on the profile entry. Setting the value to delete(2) erases the profile. It is not possible to delete the currently active profile.rw Enumeration .1.3.6.1.4.1.248.11.21.1.1.1.1.6 |
hm2FMProfileDeviceTypeManufacturer-defined product identifier (product family + product ID). Example: Object-ID 1.3.6.1.4.1.248.11.2.1.1 is the hm2ProductFamily EES and Object-ID 1.3.6.1.4.1.248.11.2.1.1.2 is the Product ID for ees25-0600ro OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.1.1.1.7 |
hm2FMProfileEncryptionActiveThe profile is encrypted if this variable is set to active(true). It is not encrypted in case of inactive(false).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.21.1.1.1.1.8 |
hm2FMProfileEncryptionVerifiedThis variable indicates true if an encrypted profile can be successfully decrypted by the device. In case of an encryption password mismatch, the verification fails the value is false. If the corresponding profile is not encrypted, this variable is set to true.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.21.1.1.1.1.9 |
hm2FMProfileSwMajorRelNumShows the major release number of the firmware, the profile was created on.ro Integer32 .1.3.6.1.4.1.248.11.21.1.1.1.1.10 |
hm2FMProfileSwMinorRelNumShows the minor release number of the firmware, the profile was created on.ro Integer32 .1.3.6.1.4.1.248.11.21.1.1.1.1.11 |
hm2FMProfileSwBugfixRelNumShows the bugfix release number of the firmware, the profile was created on.ro Integer32 .1.3.6.1.4.1.248.11.21.1.1.1.1.12 |
hm2FMProfileFingerprintHEX String representation of profile content fingerprint. Consists of characters (0..9A..F) to represent a hexadecimal number. It will contain the string invalid, if the corresponding file does not contain a correct formatted SHA1 hash as fingerprint.ro DisplayString .1.3.6.1.4.1.248.11.21.1.1.1.1.13 |
hm2FMProfileFingerprintVerifiedThis variable indicates true if the configuration profiles fingerprint matches the profile's configuration data. In case of a fingerprint, the variable is set to false.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.21.1.1.1.1.14 |
hm2FileMgmtActionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.2 |
hm2FMActionTableA list of profiles stored in NV memory. SEQUENCE OF Hm2FMActionEntry .1.3.6.1.4.1.248.11.21.1.2.1 |
hm2FMActionEntryA profile entry. Hm2FMActionEntry .1.3.6.1.4.1.248.11.21.1.2.1.1 |
hm2FMActionTypeType of the action to be performed. Enumeration .1.3.6.1.4.1.248.11.21.1.2.1.1.1 |
hm2FMActionItemTypeType of the item to be processed. Enumeration .1.3.6.1.4.1.248.11.21.1.2.1.1.2 |
hm2FMActionSourceTypeType of the source object to be processed. Enumeration .1.3.6.1.4.1.248.11.21.1.2.1.1.3 |
hm2FMActionDestinationTypeType of the destination object to be processed. Enumeration .1.3.6.1.4.1.248.11.21.1.2.1.1.4 |
hm2FMActionActivateIn case of a set operation: If the value to be written matches with the result of hm2FMActionActivateKey, the action is started. In case of a read operation, it will always reflect the key of the last successful operation.rw Integer32 .1.3.6.1.4.1.248.11.21.1.2.1.1.5 |
hm2FMActionSourceDataAdditional data for the source object. This could, for example, be a profile name or URLrw DisplayString .1.3.6.1.4.1.248.11.21.1.2.10 |
hm2FMActionDestinationDataAdditional data for the source object. This could be for example a profile name or URLrw DisplayString .1.3.6.1.4.1.248.11.21.1.2.11 |
hm2FMActionActivateResultEither returns ok(1) if the action is successfully started, param-error(2) if there is some problem with the given parameters or busy(3) if there is still an action in progress.ro Enumeration .1.3.6.1.4.1.248.11.21.1.2.12 |
hm2FMActionActivateResultTextText describing why the start of the operation has failed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.21.1.2.13 |
hm2FMActionStatusReturns the running status of the action.ro Enumeration .1.3.6.1.4.1.248.11.21.1.2.14 |
hm2FMActionPercentReadyEstimation of how many percent of the operation is done.ro Integer32 .1.3.6.1.4.1.248.11.21.1.2.15 |
hm2FMActionResultError status of the last action which has been performed.ro Enumeration .1.3.6.1.4.1.248.11.21.1.2.16 |
hm2FMActionResultTextEither OK or a descriptive text giving a reason why the last operation failedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.21.1.2.17 |
hm2FMActionActivateKeyAn advisory lock used to ensure that different management entities can not interfere with each others actions. The value read from this variable must be used to start the action by applying to the object hm2FMActionActivate.ro Integer32 .1.3.6.1.4.1.248.11.21.1.2.18 |
hm2FMActionContainerPassword.rw DisplayString .1.3.6.1.4.1.248.11.21.1.2.19 |
hm2FMActionParameterThis variable defines what acion to be done based on the value. By default it has value as none.rw Enumeration .1.3.6.1.4.1.248.11.21.1.2.20 |
hm2FMActionSourceInterfaceThis variable defines the interface from which the source IP address will be taken for the file transfer session. The frames will not necessarily be sent on this interface, only the IP address of the interface will be used as source. By default it has value 0.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.11.21.1.2.21 |
hm2FileMgmtStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.3 |
hm2FMNvmStateThis variable returns ok(1) if the contents of the currently used configuration is the same as that stored in NV memory or outOfsync(2) if there are any differences. The variable returns busy(3) if the process to determine a possible state change is currently running.ro Enumeration .1.3.6.1.4.1.248.11.21.1.3.1 |
hm2FMEnvmStateThis variable returns ok(1) if the contents of the currently used configuration on the active external non-volatile memory is the same than that stored in NV memory, outOfsync(2) if there are any differences. If the value is absent(3), then the external memory device is not connected.ro Enumeration .1.3.6.1.4.1.248.11.21.1.3.2 |
hm2FMBootParamStateReturns outOfSync(2) if the boot parameters that were applied during startup are not in sync with the currently stored boot parameters, otherwise ok(1).ro Enumeration .1.3.6.1.4.1.248.11.21.1.3.3 |
hm2FileMgmtConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.4 |
hm2FileMgmtConfigWatchdogControl OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.4.1 |
hm2ConfigWatchdogAdminStatusAdministrative status of the configuration watchdog. enable(1): start/trigger the watchdog timer disable(2): turn off the watchdog This feature provides recovery from situations where the device cannot be reached by the management station anymore. Whenever this variable is set to enable(1), the value of hm2ConfigWatchdogTimeInterval is loaded into the watchdog timer. This timer must be triggered before hm2ConfigWatchdogTimerValue reaches 0. If the watchdog timer expires, the last saved configuration of the device will be reapplied. The watchdog is triggered by MIB read and write accesses.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.21.1.4.1.1 |
hm2ConfigWatchdogOperStatusOperational status of the configuration watchdog. enable(1): watchdog up and running disable(2): watchdog inactivero HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.21.1.4.1.2 |
hm2ConfigWatchdogTimeIntervalPeriod of the watchdog timer in seconds.rw Integer32 .1.3.6.1.4.1.248.11.21.1.4.1.3 |
hm2ConfigWatchdogTimerValueCurrent countdown value of the watchdog timer in seconds.ro Integer32 .1.3.6.1.4.1.248.11.21.1.4.1.4 |
hm2ConfigWatchdogIPAddressTypeIP address type of station that triggers the watchdog.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.21.1.4.1.5 |
hm2ConfigWatchdogIPAddressIP address of station that currently triggers the watchdog.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.21.1.4.1.6 |
hm2FileMgmtServerAccessGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.4.2 |
hm2FMServerUserNameLogin name for the used file transport protocol.rw DisplayString .1.3.6.1.4.1.248.11.21.1.4.2.1 |
hm2FMServerPasswordPassword for the used file transport protocol.rw DisplayString .1.3.6.1.4.1.248.11.21.1.4.2.2 |
hm2FileMgmtSecurityGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.1.4.4 |
hm2FileMgmtConfigPasswordStatusReturns 'true' if a configuration password is set, otherwise 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.21.1.4.4.1 |
hm2FileMgmtConfigPasswordChangePassword to encrypt confidential information in the configuration file. Format: '[old password]|[new password]' set password: '|[new password]' change password: '[old password]|[new password]' remove password: '[old password]|' Valid password characters are any DisplayString characters except '|'. When this object is read, the zero-length (empty) string is returned. Setting the zero-length string has no effect.rw DisplayString .1.3.6.1.4.1.248.11.21.1.4.4.2 |
hm2FileMgmtGlobalSourceInterfaceThis variable defines the global source-interface used by file-transfers in case hm2FMActionSourceInterface is not configured by the user. The frames will not necessarily be sent on this interface, only the IP address of the interface will be used as source. By default it has value 0.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.11.21.1.4.9 |
hm2FileMgmtConfigCompatibilityModeSet 'hiosV1V2' only if a configuration file needs to be migrated to a device running HiOS 01.x.xx / 02.x.xx software. Otherwise for normal operation it is recommended to set the compatibility mode to the default 'disable'.rw Enumeration .1.3.6.1.4.1.248.11.21.1.4.10 |
hm2FileMgmtSNMPExtensionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3 |
hm2FileMgmtSESCfgActivateSuccessSetFailuresReturnIndicates a configuration profile was activated succesfully, but several config items failed to initialize. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.1 |
hm2FileMgmtSESCfgActivateErrorReturnIndicates a configuration profile could not be activated. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.2 |
hm2FileMgmtSESCfgActivateIncomlpeteReturnIndicates an incomlete activation of a configuration profile. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.3 |
hm2FileMgmtSESCfgMgrCopyCommandErrorReturnIndicates a failure of a COPY command given to the Config-Manager's command engine. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.4 |
hm2FileMgmtSESCfgMgrClearCommandErrorReturnIndicates a failure of a CLEAR command given to the Config-Manager's command engine. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.5 |
hm2FileMgmtSESCfgMgrSwapCommandErrorReturnIndicates a failure of a SWAP command given to the Config-Manager's command engine. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.6 |
hm2FileMgmtSESCfgErrorReturnIndicates a CFG test error. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.7 |
hm2FileMgmtSESCfgMgrCommandActivateErrorReturnIndicates a failure because other Config-Manager command is running. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.21.3.8 |