HIRSCHMANN-SNMP-RETURN-SET-MIB
The HIRSCHMANN-SNMP-RETURN-SET-MIB provides vendor-specific extensions for monitoring and configuring return set parameters on Hirschmann network switches, specifically managing the configuration of SNMP trap destinations and return set policies for event notification routing.
Imported Objects
Objects
19 total| Object Name |
|---|
hirschmann OBJECT IDENTIFIER .1.3.6.1.4.1.248 |
hmMgmtSNMPExtensionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1 |
hmMgmtSEReturnSetGroupThe Hirschmann Private SNMP extension MIB. Copyright (C) 2010. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.16.1.1 |
hmMgmtSESReturnsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1.1.1 |
hmMgmtSESOkReturnIndicates no error. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1.1.1.1 |
hmMgmtSESPendingReturnIndicates that the Operation is still pending. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1.1.1.2 |
hmMgmtSESFailureReturnIndicates a generic error. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1.1.1.3 |
hmMgmtSESTestReturnIndicates an error on a write to the attribute hmMgmtSETestVar. Two parameters are expected. The fist parameter is the length of the value, the second parameter is the value itself. The parameter length is {0}. The parameter is {1}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1.1.1.100 |
hmMgmtSESpinLockAn advisory lock which is used as an generator to get a unique Identifier for a SET-PDU. This allows the Agent to write additional Information of the Status of the SET-PDU.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.4.1.248.16.1.1.2 |
hmMgmtSEReturnTableThe table of additional Information (enterprise specific Errors or pending) of a SET-PDU. SEQUENCE OF HmMgmtSEReturnEntry .1.3.6.1.4.1.248.16.1.1.3 |
hmMgmtSEReturnEntryAn entry in the HmMgmtSEReturnTable. HmMgmtSEReturnEntry .1.3.6.1.4.1.248.16.1.1.3.1 |
hmMgmtSeReturnKeyContains the Value of hmMgmtSESpinLock of the corresponding SET-PDU which are responsible for this table entry. Integer32 .1.3.6.1.4.1.248.16.1.1.3.1.1 |
hmMgmtSeReturnCodeContains an additional Information to the SET-PDU. Can contain the ObjectIdentity under hmMgmtSESReturns or any other ObjectIdentity in enterprise specific MIBs.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.248.16.1.1.3.1.2 |
hmMgmtSEParameterTableThe table of additional Parameter the HmMgmtSEReturnTable for the specific message. SEQUENCE OF HmMgmtSEParameterEntry .1.3.6.1.4.1.248.16.1.1.4 |
hmMgmtSEParameterEntryA Entry in the hmMgmtSEParameterTable. HmMgmtSEParameterEntry .1.3.6.1.4.1.248.16.1.1.4.1 |
hmMgmtSEParameterIDA unique identifier (with hmMgmtSeReturnKey) for this entry. Integer32 .1.3.6.1.4.1.248.16.1.1.4.1.1 |
hmMgmtSEParameterValueThe Information for the Wildcard for the corresponding message. Link between these two tables is hmMgmtSeReturnKey. The hmMgmtSEParameterID denotes the wildcard position.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.16.1.1.4.1.2 |
hmMgmtSETestGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.1.1.100 |
hmMgmtSETestVarTest variable to check the functionality of extended error handling. Setting a value to this attribute MUST return hmMgmtSESTestReturn with specific parameter.rw OCTET STRING .1.3.6.1.4.1.248.16.1.1.100.1 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.