HIRSCHMANN-GENERIC-ERROR-MIB
Standard SNMP MIB module defining data structures for HIRSCHMANN-GENERIC-ERROR-MIB.
Imported Objects
Objects
25 total| Object Name |
|---|
hirschmann OBJECT IDENTIFIER .1.3.6.1.4.1.248 |
hmMgmtSEEErrorIDGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2 |
hmRedundancyConflictConflict Redundancy Protocols: Cannot enable {0} because of enabled {1}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.1 |
hmRedundancyConflictPortConflict Redundancy Protocols: Cannot enable {0} because of enabled {1} on Ring Port {2}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.2 |
hmMaxNumExceededMax. number exceeded for {0}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.3 |
hmAlreadyCreatedInstance already created. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.4 |
hmRedundancyConflictFpgaPortConflict Redundancy Protocols: Cannot enable {0} on configured ports. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.5 |
hmVlanUnawareConflictCannot enable {0} because {1} is enabled. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.6 |
hmRedundancyConflictPortShortCannot enable {0} on configured ports. Reason: {1} OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.7 |
hmTableFullError{0} table is full. Maximum allowed: {1}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.8 |
hmFunctionNotUsableWithInterfaceThis function cannot be used with this interface. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.9 |
hmGeneralConflict{0} conflicts with {1}. {2}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.10 |
hmGeneralExceededRangeThe {0} is exceeding the range. Maximum permissable range is {1}..{2}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.11 |
hmRmonAlarmTableFullErrorReturnAlarm table full. Only {0} entries are allowed. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.100 |
hmMgmtUdpPortInUseGiven UDP port is already in use. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.200 |
hmMgmtTcpPortInUseGiven TCP port is already in use. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.201 |
hmMgmtIPAddressConflictWithMgmtIPGiven IP address/netmask {0}/{1} conflicts with the management IP address/netmask. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.202 |
hmMgmtIPAddressConflictWithOobIPGiven IP address/netmask {0}/{1} conflicts with the out-of-band management IP address/netmask. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.203 |
hmMgmtIPAddressConflictWithRouterIPGiven IP address/netmask {0}/{1} conflicts with a routing interface IP address/netmask. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.204 |
hm2NetIPAddrInvalidThe {0} IP address is not valid. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.300 |
hm2NetIPAddrAndGatewayManagement IP address and gateway are not on the same subnet. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.301 |
hm2NetIPAddrAndSubnetThe {0} IP address and subnet mask combination is not valid. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.302 |
hm2NetPrefixLengthInvalidSubnet mask must have contiguous ones and be no longer than 30 bits. OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.2.303 |
hmMgmtSEInfoIDGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.3 |
hmMgmtSEInfoValueChangedNote: Value changed from {0} to {1} OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.3.1 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.