HIRSCHMANN-DISCOVERY-MGMT-MIB
The HIRSCHMANN-DISCOVERY-MGMT-MIB enables SNMP-based discovery and management of Hirschmann network devices, specifically monitoring device presence, topology relationships, and discovery session states within the Hirschmann management infrastructure.
Imported Objects
Objects
17 total| Object Name |
|---|
hmMgmtDiscoveryGroupThe Hirschmann generic discovery SNMP MIB. Copyright (C) 2014. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.16.100 |
hmMgmtDiscoveryStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.100.1 |
hmMgmtDiscModeOperational mode of the protocol.ro Enumeration .1.3.6.1.4.1.248.16.100.1.1 |
hmMgmtDiscMacAddrPhysical base address (MAC address) of the agent. This is the burned in MAC address from the production.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.16.100.1.2 |
hmMgmtDiscIpIntfTypeThe interface which reports the ip settings.ro Enumeration .1.3.6.1.4.1.248.16.100.1.3 |
hmMgmtDiscSwVersionVersion of the currently running firmware.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.248.16.100.1.4 |
hmMgmtDiscProductDescrManufacturer-defined product description.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.248.16.100.1.5 |
hmMgmtDiscoveryCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.16.100.2 |
hmMgmtDiscCfgUUIDThe UUID of the device used for the discovery protocol.rw OCTET STRING .1.3.6.1.4.1.248.16.100.2.1 |
hmMgmtDiscCfgProtoThe switch's network configuration protocol. The default value is dependent of the device type.rw Enumeration .1.3.6.1.4.1.248.16.100.2.2 |
hmMgmtDiscCfgIPAddrTypeLocal IP address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.16.100.2.3 |
hmMgmtDiscCfgIPAddrIP address of the management agent board. Changing this value will take effect after activating with hmMgmtDiscCfgAction.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.16.100.2.4 |
hmMgmtDiscCfgPrefLenThe length of the IP netmask.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.16.100.2.5 |
hmMgmtDiscCfgGwIPAddrTypeDefault gateway IP address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.16.100.2.6 |
hmMgmtDiscCfgGwIPAddrIP address of the default gateway. Changing this value will take effect after activating with hmMgmtDiscCfgAction.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.16.100.2.7 |
hmMgmtDiscCfgActionThis object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack.rw Enumeration .1.3.6.1.4.1.248.16.100.2.8 |
hmMgmtDiscCfgBlinkingEnables/disables the HiDiscovery blinking sequence on this device. This object will not be saved.rw Enumeration .1.3.6.1.4.1.248.16.100.2.9 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.