CISCOSB-DOT1X-MIB
AI MIB Summary
The CISCOSB-DOT1X-MIB module enables monitoring and management of IEEE 802.1X port-based network access control parameters, including authentication states, session counts, and failure counters, specifically on Cisco Secure Border (CISCOSB) hardware platforms.
This private MIB module defines dot1x private MIBs.
Main OID:
rldot1x.1.3.6.1.4.1.9.6.1.101.95
101
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
101 total| Object Name |
|---|
rldot1xThis private MIB module defines dot1x private MIBs. MODULE-IDENTITY .1.3.6.1.4.1.9.6.1.101.95 |
CISCOSB-MIBThis private MIB module defines dot1x private MIBs. Unknown .1.3.6.1.4.1.9.6.1.101.95 |
rldot1xMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.1 |
rldot1xExtAuthSessionStatsTableA table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF Rldot1xExtAuthSessionStatsEntry .1.3.6.1.4.1.9.6.1.101.95.2 |
rldot1xExtAuthSessionStatsEntryThe session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active. Rldot1xExtAuthSessionStatsEntry .1.3.6.1.4.1.9.6.1.101.95.2.1 |
rlDot1xAuthSessionAuthenticMethodThe authentication method used to establish the
session.ro Enumeration .1.3.6.1.4.1.9.6.1.101.95.2.1.1 |
rldot1xGuestVlanSupportedindicate if guest vlan is supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.3 |
rldot1xGuestVlanVIDspecify the guest vlan tag , 0 for non exiting.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.9.6.1.101.95.4 |
rldot1xGuestVlanPortsthe ports that can be members in the guest vlanrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.9.6.1.101.95.5 |
rldot1xUnAuthenticatedVlanSupportedindicate if unauthenticated Vlan is supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.6 |
rldot1xUnAuthenticatedVlanTableport belong to vlan in all port authenticated state except force unauthenticated table SEQUENCE OF Rldot1xUnAuthenticatedVlanEntry .1.3.6.1.4.1.9.6.1.101.95.7 |
rldot1xUnAuthenticatedVlanEntryport belong to vlan in all port authenticated state except force unauthenticated entry Rldot1xUnAuthenticatedVlanEntry .1.3.6.1.4.1.9.6.1.101.95.7.1 |
rldot1xUnAuthenticatedVlanStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.7.1.1 |
rldot1xUserBasedVlanSupportedindicate if user based Vlan is supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.8 |
rldot1xUserBasedVlanPortsthe ports that can be members in the user based vlanrw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.9.6.1.101.95.9 |
rldot1xAuthenticationPortTableA table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system. SEQUENCE OF Rldot1xAuthenticationPortEntry .1.3.6.1.4.1.9.6.1.101.95.10 |
rldot1xAuthenticationPortEntryThe Port number and mac method Rldot1xAuthenticationPortEntry .1.3.6.1.4.1.9.6.1.101.95.10.1 |
rldot1xAuthenticationPortMethodThe value of the 802.1x-based, mac-based and web-based authentication.rw Enumeration .1.3.6.1.4.1.9.6.1.101.95.10.1.1 |
rldot1xRadiusAttrVlanIdEnabledDefines if treat VLAN ID that received from Radius attributes
in Radius-Accept message.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.10.1.2 |
rldot1xRadiusAttAclNameEnabledDefines if treat ACL Names that received from Radius attributes
in Radius-Accept message.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.10.1.3 |
rldot1xTimeBasedNameSpecifies a time range. When the Time Range is not in effect the port state would be Unauthorized.rw SnmpAdminString .1.3.6.1.4.1.9.6.1.101.95.10.1.4 |
rldot1xTimeBasedActiveSpecifies if time range is active now or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.10.1.5 |
rldot1xRadiusAttrVlanIdentifierIn case that value is not 0,
This field will define the VLAN ID in case that it is not received from Radius attributes
in Radius-Accept message.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.9.6.1.101.95.10.1.6 |
rldot1xMaxHostsMaximum number of authenticated hosts allowed on the interface.
A value of 0 means no limitation.rw Unsigned32 .1.3.6.1.4.1.9.6.1.101.95.10.1.7 |
rldot1xMaxLoginAttemptsMaximum number of allowedlogin attempts on the interface.
A value of 0 means the infinite number of attemtps.
The configuration is applied only to Web-Based authentication.rw INTEGER (0.. 10) .1.3.6.1.4.1.9.6.1.101.95.10.1.8 |
rldot1xTimeoutSilencePeriodSet the number of seconds that if an authorized client did not send traffic during this period,
then the client is changed to unauthrized.
The configuration is applied only to Web-Based authentication.rw INTEGER (0.. 65535) .1.3.6.1.4.1.9.6.1.101.95.10.1.9 |
rldot1xNumOfAuthorizedHostsNumber of authorized host in multi-sessions mode.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.10.1.10 |
rldot1xAuthenticationOpenEnabledOpen access allows clients or devices to gain network access before authentication is performed.
In the mode the switch performs failure replies received from a Radius server as success.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.10.1.11 |
rldot1xAuthMultiStatsTableA table that contains the statistics objects for the
Authenticator PAE associated with each Port and MAC for
multisession 802.1x mode of operation.
An entry appears in this table for each port and MAC that have an
authentication session currently running under way for them. SEQUENCE OF Rldot1xAuthMultiStatsEntry .1.3.6.1.4.1.9.6.1.101.95.11 |
rldot1xAuthMultiStatsEntryThe statistics information for an Authenticator PAE. Rldot1xAuthMultiStatsEntry .1.3.6.1.4.1.9.6.1.101.95.11.1 |
rldot1xAuthMultiStatsPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.11.1.1 |
rldot1xAuthMultiStatsSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.11.1.2 |
rldot1xAuthMultiEapolFramesRxThe number of valid EAPOL frames of any type
that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.3 |
rldot1xAuthMultiEapolFramesTxThe number of EAPOL frames of any type
that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.4 |
rldot1xAuthMultiEapolStartFramesRxThe number of EAPOL Start frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.5 |
rldot1xAuthMultiEapolLogoffFramesRxThe number of EAPOL Logoff frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.6 |
rldot1xAuthMultiEapolRespIdFramesRxThe number of EAP Resp/Id frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.7 |
rldot1xAuthMultiEapolRespFramesRxThe number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.8 |
rldot1xAuthMultiEapolReqIdFramesTxThe number of EAP Req/Id frames that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.9 |
rldot1xAuthMultiEapolReqFramesTxThe number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.10 |
rldot1xAuthMultiInvalidEapolFramesRxThe number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.11 |
rldot1xAuthMultiEapLengthErrorFramesRxThe number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.11.1.12 |
rldot1xAuthMultiDiagTableA table that contains the diagnostics objects for the
Authenticator PAE associated with each Port and MAC.
An entry appears in this table for each port and MAC that have an
authentication session currently running under way for them. SEQUENCE OF Rldot1xAuthMultiDiagEntry .1.3.6.1.4.1.9.6.1.101.95.12 |
rldot1xAuthMultiDiagEntryThe diagnostics information for an Authenticator PAE. Rldot1xAuthMultiDiagEntry .1.3.6.1.4.1.9.6.1.101.95.12.1 |
rldot1xAuthMultiDiagPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.12.1.1 |
rldot1xAuthMultiDiagSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.12.1.2 |
rldot1xAuthMultiEntersConnectingCounts the number of times that the state machine
transitions to the CONNECTING state from any other
state.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.3 |
rldot1xAuthMultiEntersAuthenticatingCounts the number of times that the state machine
transitions from CONNECTING to AUTHENTICATING, as a
result of an EAP-Response/Identity message being
received from the Supplicant.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.4 |
rldot1xAuthMultiAuthSuccessWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to AUTHENTICATED, as a
result of the Backend Authentication state machine
indicating successful authentication of the Supplicant
(authSuccess = TRUE).ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.5 |
rldot1xAuthMultiAuthFailWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to HELD, as a result
of the Backend Authentication state machine indicating
authentication failure (authFail = TRUE).ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.6 |
rldot1xAuthMultiAuthReauthsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.7 |
rldot1xAuthMultiAuthEapStartsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Start message being received
from the Supplicant.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.8 |
rldot1xAuthMultiAuthReauthsWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of a reauthentication request
(reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.9 |
rldot1xAuthMultiAuthEapStartsWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of an EAPOL-Start message being received from the
Supplicant.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.10 |
rldot1xAuthMultiBackendResponsesCounts the number of times that the state machine sends
an initial Access-Request packet to the Authentication
server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator
attempted communication with the Authentication Server.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.11 |
rldot1xAuthMultiBackendAccessChallengesCounts the number of times that the state machine
receives an initial Access-Challenge packet from the
Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that
the Authentication Server has communication with
the Authenticator.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.12 |
rldot1xAuthMultiBackendOtherRequestsToSupplicantCounts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.13 |
rldot1xAuthMultiBackendNonNakResponsesFromSupplicantCounts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticators
chosen EAP-method.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.14 |
rldot1xAuthMultiBackendAuthSuccessesCounts the number of times that the state machine
receives an EAP-Success message from the Authentication
Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that
the Supplicant has successfully authenticated to
the Authentication Server.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.12.1.15 |
rldot1xAuthMultiSessionStatsTableA table that contains the session statistics objects
for the Authenticator PAE associated with each Port.
An entry appears in this table for each port that may
authenticate access to itself. SEQUENCE OF Rldot1xAuthMultiSessionStatsEntry .1.3.6.1.4.1.9.6.1.101.95.13 |
rldot1xAuthMultiSessionStatsEntryThe session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session on each port where
there is no session currently active. Rldot1xAuthMultiSessionStatsEntry .1.3.6.1.4.1.9.6.1.101.95.13.1 |
rldot1xAuthMultiSessionStatsPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.13.1.1 |
rldot1xAuthMultiSessionStatsSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.13.1.2 |
rldot1xAuthMultiSessionOctetsRxThe number of octets received in user data
frames on this Port during the session.ro Counter64 .1.3.6.1.4.1.9.6.1.101.95.13.1.3 |
rldot1xAuthMultiSessionOctetsTxThe number of octets transmitted in user data
frames on this Port during the session.ro Counter64 .1.3.6.1.4.1.9.6.1.101.95.13.1.4 |
rldot1xAuthMultiSessionFramesRxThe number of user data frames received
on this Port during the session.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.13.1.5 |
rldot1xAuthMultiSessionFramesTxThe number of user data frames transmitted
on this Port during the session.ro Counter32 .1.3.6.1.4.1.9.6.1.101.95.13.1.6 |
rldot1xAuthMultiSessionIdA unique identifier for the session, in the
form of a printable ASCII string of at least
three characters.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.6.1.101.95.13.1.7 |
rldot1xAuthMultiSessionTimeThe duration of the session in seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.6.1.101.95.13.1.8 |
rldot1xAuthMultiSessionUserNameThe User-Name representing the identity of the
Supplicant PAE.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.6.1.101.95.13.1.9 |
rldot1xAuthMultiSessionRadiusAttrVlanVLAN ID that received from Radius attributes.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.13.1.10 |
rldot1xAuthMultiSessionRadiusAttrFilterIdFirst filter ID that received from Radius attributes.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.6.1.101.95.13.1.11 |
rldot1xAuthMultiSessionRadiusAttrSecondFilterIdSecond filter ID that received from Radius attributes.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.6.1.101.95.13.1.12 |
rlDot1xAuthMultiSessionMonitorResultsReasonThe monitor result reason of the session.ro Enumeration .1.3.6.1.4.1.9.6.1.101.95.13.1.13 |
rlDot1xAuthMultiSessionMethodTypeThe current session method type.ro Enumeration .1.3.6.1.4.1.9.6.1.101.95.13.1.14 |
rldot1xAuthMultiConfigTableA table that contains the configuration objects for the
Authenticator PAE associated with each port and MAC.
An entry appears in this table for each port and MAC that may
authenticate access to itself. SEQUENCE OF Rldot1xAuthMultiConfigEntry .1.3.6.1.4.1.9.6.1.101.95.14 |
rldot1xAuthMultiConfigEntryThe configuration information for an Authenticator
PAE. Rldot1xAuthMultiConfigEntry .1.3.6.1.4.1.9.6.1.101.95.14.1 |
rldot1xAuthMultiPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.14.1.1 |
rldot1xAuthMultiSourceMacMac of the authentication session.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.14.1.2 |
rldot1xAuthMultiPaeStateThe current value of the Authenticator PAE state
machine.ro Enumeration .1.3.6.1.4.1.9.6.1.101.95.14.1.3 |
rldot1xAuthMultiBackendAuthStateThe current state of the Backend Authentication
state machine.ro Enumeration .1.3.6.1.4.1.9.6.1.101.95.14.1.4 |
rldot1xAuthMultiControlledPortStatusThe current value of the controlled Port
status parameter for the Port.ro PaeControlledPortStatus (IEEE8021-PAE-MIB) .1.3.6.1.4.1.9.6.1.101.95.14.1.5 |
rldot1xBpduFilteringEnabledSpecify that when 802.1x is globally disabled,
802.1x BPDU packets would be filtered or bridged.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.15 |
rldot1xRadiusAttributesErrorsAclRejectSpecify ACL error handling for the Radius attributes feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.18 |
rldot1xGuestVlanTimeIntervalindicate the guest vlan timeout interval.rw INTEGER .1.3.6.1.4.1.9.6.1.101.95.19 |
rldot1xMacAuthSuccessTrapEnabledSpecify if sending traps when a MAC address is successfully
authenticated by the 802.1X mac-authentication access control.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.20 |
rldot1xMacAuthFailureTrapEnabledSpecify if sending traps when MAC address was failed
in authentication of the 802.1X MAC authentication access control.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.21 |
rldot1xLegacyPortTableA table of system level information for each port
supported by the Port Access Entity. An entry appears
in this table for each port of this system. SEQUENCE OF Rldot1xLegacyPortEntry .1.3.6.1.4.1.9.6.1.101.95.22 |
rldot1xLegacyPortEntryThe Port number and leagcy mode Rldot1xLegacyPortEntry .1.3.6.1.4.1.9.6.1.101.95.22.1 |
rldot1xLegacyPortModeEnabledIndicates whether in multiple sessions mode
work according to legacy devices mode or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.22.1.1 |
rldot1xSystemAuthControlMonitorVlanVLAN Tag of 802.1x monitoring VLAN in the System.
value of 0 means that the monitoring mode is disabled.rw INTEGER .1.3.6.1.4.1.9.6.1.101.95.23 |
rldot1xClearPortMibCountersEach bit that is set in this portList represent a port that
its mib counters should be reset.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.9.6.1.101.95.24 |
rldot1xWebQuietFailureTrapEnabledSpecify if sending traps when a client is set in quiet state
after the maximum sequential attempts of login.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.25 |
rldot1xMacWebAuthSuccessTrapEnabledSpecify if sending traps per authentication method
when a session is successfully authenticated.rw Enumeration .1.3.6.1.4.1.9.6.1.101.95.26 |
rldot1xMacWebAuthFailureTrapEnabledSpecify if sending traps per authentication method when a session was failed.rw Enumeration .1.3.6.1.4.1.9.6.1.101.95.27 |
rldot1xLockedCientsTableA table that contains the locked clients information for Web-based authentication. SEQUENCE OF Rldot1xLockedCientsEntry .1.3.6.1.4.1.9.6.1.101.95.28 |
rldot1xLockedCientsEntryThe locked clients entry that entered silence period timeout for Web-based authentication. Rldot1xLockedCientsEntry .1.3.6.1.4.1.9.6.1.101.95.28.1 |
rldot1xLockedCientsPortNumberPort Number.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.28.1.1 |
rldot1xLockedCientsSourceMacMac of the locked client.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.28.1.2 |
rldot1xLockedCientsRemainedTimeThe time that is remained till the expiry of silence period.ro INTEGER .1.3.6.1.4.1.9.6.1.101.95.28.1.3 |
rldot1xLockedCientsRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.6.1.101.95.28.1.4 |