BayNetworks-NTP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BayNetworks-NTP-MIB.
41
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
RFC1155-SMINTP base entry table. SEQUENCE OF WfNtpEntry .1.3.6.1.4.1.18.3.5.3.17.1 |
wfNtpAccessTableList of peers we restrict/prefer time synchronization
based on source IP address or the source subnet SEQUENCE OF WfNtpAccessEntry .1.3.6.1.4.1.18.3.5.3.17.2 |
wfNtpAccessEntryAn access control entry description WfNtpAccessEntry .1.3.6.1.4.1.18.3.5.3.17.2.1 |
wfNtpAccessDeleteCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete an NTP access control recordrw Enumeration .1.3.6.1.4.1.18.3.5.3.17.2.1.1 |
wfNtpAccessFilterTypeCould be restrict or preferrw Enumeration .1.3.6.1.4.1.18.3.5.3.17.2.1.2 |
wfNtpAccessIpAddrSource Ip address of Peer the rule applies toro IpAddress .1.3.6.1.4.1.18.3.5.3.17.2.1.3 |
wfNtpAccessIpMaskMask of subnet if rule applies to peers from
a specific subnetrw IpAddress .1.3.6.1.4.1.18.3.5.3.17.2.1.4 |
wfNtpPeerTableThe list of configured NTP peers SEQUENCE OF WfNtpPeerEntry .1.3.6.1.4.1.18.3.5.3.17.3 |
wfNtpPeerEntryAn NTP peer description WfNtpPeerEntry .1.3.6.1.4.1.18.3.5.3.17.3.1 |
wfNtpPeerDeleteCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete an IP interface.rw Enumeration .1.3.6.1.4.1.18.3.5.3.17.3.1.1 |
wfNtpPeerStateState of peerro Gauge .1.3.6.1.4.1.18.3.5.3.17.3.1.2 |
wfNtpCfgPeerModeThe configured as peer or serverrw Enumeration .1.3.6.1.4.1.18.3.5.3.17.3.1.3 |
wfNtpPeerModeThe mode peer of operationro Enumeration .1.3.6.1.4.1.18.3.5.3.17.3.1.4 |
wfNtpPeerHostModeRouter NTP moderw Enumeration .1.3.6.1.4.1.18.3.5.3.17.3.1.5 |
wfNtpPeerIpAddressSource IP address of Peerro IpAddress .1.3.6.1.4.1.18.3.5.3.17.3.1.6 |
wfNtpSourceIpAddressSource IP address of Peerrw IpAddress .1.3.6.1.4.1.18.3.5.3.17.3.1.7 |
wfNtpPeerPrefPeer Preference: Preference assigned to this peer. Will override
NTP peer selection algorithm if greater than default valuerw Enumeration .1.3.6.1.4.1.18.3.5.3.17.3.1.8 |
wfNtpPeerRefIdPeer Reference clock IP addressro IpAddress .1.3.6.1.4.1.18.3.5.3.17.3.1.9 |
wfNtpPeerVersionPeers NTP version numberro INTEGER .1.3.6.1.4.1.18.3.5.3.17.3.1.10 |
wfNtpPeerPrecisionPeers clock precisionro INTEGER .1.3.6.1.4.1.18.3.5.3.17.3.1.11 |
wfNtpPeerStratumPeer stratumro INTEGER(0 .. 15) .1.3.6.1.4.1.18.3.5.3.17.3.1.12 |
wfNtpPeerRootDelayDelay from syncronization clock in secondsro INTEGER .1.3.6.1.4.1.18.3.5.3.17.3.1.13 |
wfNtpPeerDispersionPeer clock dispersionro Gauge .1.3.6.1.4.1.18.3.5.3.17.3.1.14 |
wfNtpPeerOffsetPeer clock offsetro Gauge .1.3.6.1.4.1.18.3.5.3.17.3.1.15 |
wfNtpPeerPollsNumber of times this peer has been polledro Counter .1.3.6.1.4.1.18.3.5.3.17.3.1.16 |
wfNtpPeerFrameReceivesNumber of times this peer has been polledro Counter .1.3.6.1.4.1.18.3.5.3.17.3.1.17 |
wfNtpEntryAn NTP base entry description WfNtpEntry .wfNtpEntryTable.1 |
wfNtpIndexIndex of this entry. Index could only be onero INTEGER .wfNtpEntryTable.1.1 |
wfNtpDeleteCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete NTP.rw Enumeration .wfNtpEntryTable.1.2 |
wfNtpDisableEnable/Disable NTPrw Enumeration .wfNtpEntryTable.1.3 |
wfNtpModeEnable/Disable NTPrw Enumeration .wfNtpEntryTable.1.4 |
wfNtpDebugFlagFlag for setting debug levelrw Gauge .wfNtpEntryTable.1.5 |
wfNtpStateThe current state of NTP.ro Enumeration .wfNtpEntryTable.1.6 |
wfNtpVersionThe NTP version on the Router NTP client/server
softwarero INTEGER .wfNtpEntryTable.1.7 |
wfNtpStratumRouter NTP client software stratumro INTEGER .wfNtpEntryTable.1.8 |
wfNtpRootDelayDelay from synchronization server
this could be another secondary server or
primary server in secondsro INTEGER .wfNtpEntryTable.1.9 |
wfNtpReferenceIdReference ID of time synchronozition sourcero IpAddress .wfNtpEntryTable.1.10 |
wfNtpClockPrecAn 8 bit number indicating the precision
of the router clock in seconds to the nearest
power of two.ro INTEGER .wfNtpEntryTable.1.11 |
wfNtpLeapHappenedFlag indicating whether leap occurred or not
leap: a leap second is added / subtracted from the
last second of a particular day for e.g. the time
of a particular day will end with 23:59:60 instead
of 23:59:59. This is done to conform with Universal
Standard Time conventionsro Enumeration .wfNtpEntryTable.1.12 |
wfNtpLeapTimeNext leap adjustment in 1/100 secondro TimeTicks (SNMPv2-SMI) .wfNtpEntryTable.1.13 |
wfNtpUpdateTimerNumber of seconds in powers of 2 between NTP polls.rw INTEGER .wfNtpEntryTable.1.14 |