ASKEY-IGMP-SNOOP-MIB
The ASKEY-IGMP-SNOOP-MIB enables monitoring and management of IGMP snooping state tables, group membership counts, and port-to-group bindings on ASKEY Layer 2 switches to optimize multicast traffic forwarding.
Imported Objects
Objects
13 total| Object Name |
|---|
askeyIgmpSnoopMibASKEY IGMP SNOOPING MIB OID defines and documentation. MODULE-IDENTITY .1.3.6.1.4.1.3646.1300.2.3 |
askeyIgmpSnoop OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.3.1 |
askeyIgmpSnoopOperStatusSetting this object to enable (1) enables IGMP Snooping. Setting
it to disable (2) disables IGMP Snooping.
Note that IGMP Snooping can function with or without GVRP and/or
GMRP enabled.ro Enumeration .1.3.6.1.4.1.3646.1300.2.3.1.1 |
askeyMcastAgingTimeDURABLE: { 300 }
The timeout period in seconds for aging out Multicast Groups
dynamically learned with IGMP Snooping. Note that aging operates
on a per interface per VLAN per multicast group basis.
This interval is also used to age out ports that have received
IGMP Router Query PDUs on a per VLAN basis.rw INTEGER .1.3.6.1.4.1.3646.1300.2.3.1.3 |
askeyIgmpSnoopTableThis table, which provides IGMP Snooping information, augments
the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). SEQUENCE OF AskeyIgmpSnoopEntry .1.3.6.1.4.1.3646.1300.2.3.1.4 |
askeyIgmpSnoopEntryDisplays by VLAN, Multicast Group, and Multicast receive port
(which is always 0 for TMS) the set of ports enabled to forward
Multicast Group traffic as determined by the IGMP Snooping task. AskeyIgmpSnoopEntry .1.3.6.1.4.1.3646.1300.2.3.1.4.1 |
askeyIgmpSnoopVlanIdIEEE 802.1q VLAN tag number.ro INTEGER .1.3.6.1.4.1.3646.1300.2.3.1.4.1.1 |
askeyIgmpSnoopMacAddressA multicast MAC address for which the bridge has
snoopped information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3646.1300.2.3.1.4.1.2 |
askeyIgmpSnoopEgressPortsThis read-only object displays the set of ports enabled to
forward specific Multicast Group traffic as determined by the
IGMP Snooping task.
It should be noted that the IGMP Snooping task generates a pseudo-
static (i.e., not saved in NVM) port list similar to the RFC2674
Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently,
a port will not be a member of 'tmsIgmpSnoopEgressPorts' if
it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3646.1300.2.3.1.4.1.3 |
askeyIgmpSnoopQueryPortsThis read-only object displays the set of ports that have received
IGMP Router Query PDUs for this VLAN as determined by the IGMP
Snooping task.ro PortList -- .1.3.6.1.4.1.3646.1300.2.3.1.4.1.4 |
askeyIgmpSnoopConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.3.2 |
askeyIgmpSnoopGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.3.2.1 |
askeyIgmpSnoopCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.3.2.2 |
More MIBs from ASKEY
Browse all ASKEYMIBs →The ASKEY-SYSTEM-MIB provides SNMP management interfaces for ASKEY ADSL modems and routers, enabling the monitoring of DSL line parameters such as attenuation, signal-to-noise ratio, and interface status. It facilitates the collection of ADSL-specific performance counters and error statistics required for troubleshooting broadband connectivity issues on vendor hardware.
The ASKEY-ADSL-MIB module enables monitoring and management of ASKEY vendor ADSL modems and DSLAMs by exposing interface statistics, line status, and physical layer parameters via SNMP. It provides specific counters for DSL synchronization states, error rates, and data throughput to facilitate troubleshooting of broadband access links.
The ASKEY-ENTITY-ALARM-MIB extends the standard ENTITY-MIB to define, monitor, and report hardware alarm states and entity status conditions for ASKEY networking devices. It provides specific managed objects for tracking critical system events, such as interface failures, power supply anomalies, and environmental thresholds, within ASKEY-managed infrastructure.
The ASKEY-HARDWARE-INFORMATION-MIB enables SNMP-based monitoring of ASKEY network equipment by exposing operational status and telemetry for network cards, line cards, and fan modules. This module facilitates hardware health assessment and fault detection through standardized access to component-level inventory and state data.
The ASKEY-MCAST-MIB module enables monitoring and configuration of multicast profile parameters on ASKEY network devices, specifically tracking session states, group membership data, and multicast forwarding statistics. This MIB facilitates the management of IP multicast services by exposing OID-based metrics for profile definitions and operational status within the device's multicast routing and switching infrastructure.
The ASKEY-DSLAM-VC-VLAN-MIB enables monitoring and configuration of Virtual Circuit (VC) to Virtual LAN (VLAN) mapping tables on ASKEY DSL Access Multiplexer (DSLAM) hardware via SNMP. It exposes managed objects for tracking the binding relationships between ATM/PPPoE virtual circuits and their corresponding Ethernet VLAN identifiers to ensure proper traffic segregation and service delivery.