ASKEY-DSLAM-VC-VLAN-MIB
AI MIB Summary
The ASKEY-DSLAM-VC-VLAN-MIB enables monitoring and configuration of Virtual Circuit (VC) to Virtual LAN (VLAN) mapping tables on ASKEY DSL Access Multiplexer (DSLAM) hardware via SNMP. It exposes managed objects for tracking the binding relationships between ATM/PPPoE virtual circuits and their corresponding Ethernet VLAN identifiers to ensure proper traffic segregation and service delivery.
The MIB module presents all managed objects for mapping between vc and vlan.
Main OID:
askeyDslamVcVlanMIB.1.3.6.1.4.1.3646.1300.2.11
26
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
askeyDslamVcVlanMIBThe MIB module presents all managed objects for mapping between vc and vlan. MODULE-IDENTITY .1.3.6.1.4.1.3646.1300.2.11 |
askeyVcVlanTable SEQUENCE OF AskeyVcVlanEntry .1.3.6.1.4.1.3646.1300.2.11.1 |
askeyVcVlanEntryAn entry in the Vc-Vlan table. It defines traffic parameter values and the QoS Class of a virtual channel and other parameters that traffic on this virtual channel should be mapped to such as VLAN ID, 802.1p. It also specifies the RFC2684 mode and mac limits. To create a entry at Vc Vlan entry, the following procedures is used: Negotiated VC-VLAN establishment (1a) The management application creates a VC-VLAN entry in the askeyVcVlanTable by setting vcVlanEntryRowStatus to createAndWait(5). This may fail for the following reasons: - The selected VPI/VCI values are unavailable, - The selected VPI/VCI values are in use. Otherwise, the agent creates a row and reserves the VPI/VCI values on that port. (1b) The management application creates a VC-VLAN entry in the askeyVcVlanTable by setting any field to a valid value except vcVlanEntryRowStatus. (2) The manager activates the VC-VLAN by setting the vcVlanEntryRowStatus to active(1). If this set is successful, the agent has reserved the resources to satisfy the requested traffic parameter values and the QoS Class for that VC-VLAN. Traffic flow is on. (3) The manager de-actives the VC-VLAN by setting the vcVlanEntryRowStatus to notInService(3) and the agent may release all associated resources. VC-VLAN Retirement An entry is released by setting vcVlanEntryRowStatus to destroy(6), and the agent may release all associated resources. AskeyVcVlanEntry .1.3.6.1.4.1.3646.1300.2.11.1.1 |
vcVlanEntryVpiThe VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.ro INTEGER .1.3.6.1.4.1.3646.1300.2.11.1.1.1 |
vcVlanEntryVciThe VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.ro INTEGER .1.3.6.1.4.1.3646.1300.2.11.1.1.2 |
vcVlanEntryVlanIdIEEE 802.1q VLAN tag number that traffic on this VCL should be mapped to in the upstream direction.rw INTEGER .1.3.6.1.4.1.3646.1300.2.11.1.1.3 |
vcVlanEntry8021pPriorityIEEE 802.1p Priority that traffic on this VCL should be mapped to in the upstream direction.rw INTEGER .1.3.6.1.4.1.3646.1300.2.11.1.1.4 |
vcVlanEntryMacLimitThe maximum number of MAC associated to the VCL link. The total number of MAC associated to VCL links of one port can not over 8. This attribute only applies to bridged mode VC, if the VC is routed mode, the mac limit will always be 1.rw INTEGER .1.3.6.1.4.1.3646.1300.2.11.1.1.5 |
vcVlanEntryRfc2684ModeThe meanings of the values are: routed(1): RFC2684 routed mode bridged(2): RFC2684 bridged mode pppoE(3): only PPPoE frames. Not supported now.rw Enumeration .1.3.6.1.4.1.3646.1300.2.11.1.1.6 |
vcVlanEntryRoutedModeNexthopThis attribute only applies to routed mode VC. If the VC is bridged mode, ignore this. The name of the nexthop(ISP) needed in routed mode.rw SnmpAdminString .1.3.6.1.4.1.3646.1300.2.11.1.1.7 |
vcVlanEntryIPTrafficProfileThis attribute indicates the IP traffic profile used to describe the VC VLAN entry's traffic characteristic.rw SnmpAdminString .1.3.6.1.4.1.3646.1300.2.11.1.1.8 |
vcVlanEntryServiceTypeThis attribute indicates the ethertype filter of the upstream direction. If the filter type is PPPoE, allow the PPPoE packet only. If the filter type is DHCP, allow the DHCP packet only. If the filter type is PPPoEandDHCP, allow the PPPoEandDHCP packet. If the filter type is Static_IP, allow the specific IP according to vcVlanEntryServiceStaticIpBase and vcVlanEntryServiceStaticIpNumber.rw Enumeration .1.3.6.1.4.1.3646.1300.2.11.1.1.9 |
vcVlanEntryServiceStaticIpBasevcVlanEntryServiceStaticIpBase and vcVlanEntryServiceStaticIpNumber limit.rw IpAddress .1.3.6.1.4.1.3646.1300.2.11.1.1.10 |
vcVlanEntryServiceIpNumberLimitThis attribute limits the number of DHCP or static IP per PVC. It can not be bigger than MAC limit if service type is staticip; otherwise it can not be bigger than 8.rw INTEGER .1.3.6.1.4.1.3646.1300.2.11.1.1.11 |
vcVlanEntryOperStatusThis attribute indicates the operational status of the VC VLAN entry.ro Enumeration .1.3.6.1.4.1.3646.1300.2.11.1.1.12 |
vcVlanEntryRowStatusThis object is used to create, delete or modify a row in this table. To create a new entry, this object is initially set to 'createAndWait'. 'createAndGo' is not supportedrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3646.1300.2.11.1.1.13 |
ipTrafficObects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.11.2 |
ipTrafficProfileCountThis object respresents the total count of configured IP traffic profiles.ro INTEGER .1.3.6.1.4.1.3646.1300.2.11.2.1 |
ipTrafficProfileTableThis table contains IP traffic profiles and each IP traffic profile can be defined to represent characteristics of an IP traffic. One entry in this table reflects an IP traffic profile defined by a manager which can be used to assign to any VC-VLAN entry of each the ADSL subscriber line. Maximum number of IP traffic profiles is 60. SEQUENCE OF IpTrafficProfileEntry .1.3.6.1.4.1.3646.1300.2.11.2.2 |
ipTrafficProfileEntryEach entry consists of a list of parameters that represents an IP traffic profile. IpTrafficProfileEntry .1.3.6.1.4.1.3646.1300.2.11.2.2.1 |
ipTrafficProfileNameThe profile name is used to be the index of each IP traffic profile. It must be unique and can contains '0'~'9', 'A'~'Z', 'a'~'z', '-','_','.','@' only. SnmpAdminString .1.3.6.1.4.1.3646.1300.2.11.2.2.1.1 |
ipTrafficProfileUsRateLimitThe level of rate limiting in up-stream direction of this IP traffic profile.rw Enumeration .1.3.6.1.4.1.3646.1300.2.11.2.2.1.2 |
ipTrafficProfileMaxDsRateThe maximum transmit data rate in Kbps in the down-stream direction of this IP traffic profile. The specified data rate will be rounded to the largest multiple of 32.rw INTEGER .1.3.6.1.4.1.3646.1300.2.11.2.2.1.3 |
ipTrafficProfileDsPriorityThe transmit priority applied to the down-stream direction of this IP traffic profile. The value 0 indicateds the lowest priority, the value 3 indicateds the highest priorityrw INTEGER .1.3.6.1.4.1.3646.1300.2.11.2.2.1.4 |
ipTrafficProfileRowStatusThe rowStatus of a mcast service profile. Set rowStatus to createAndGo to create an IP traffic profile and set to destory to delete an IP traffic profile. If the profile is used by any VC-VLAN entry, it is not allowed to be deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3646.1300.2.11.2.2.1.5 |
ipTrafficProfileDsBcastFilterThis object indicates down stream broadcast filter setting. The setting includes the following values: Passing all broadcast packets is used to 'passAll(1)'. Dropping all broadcast packets is used to 'dropAll(2)'. 'specific(3)' will fileter packets and only pass the broadcast packets that is spcific VLAN ID.rw Enumeration .1.3.6.1.4.1.3646.1300.2.11.2.2.1.6 |