ASKEY-MCAST-MIB
The ASKEY-MCAST-MIB module enables monitoring and configuration of multicast profile parameters on ASKEY network devices, specifically tracking session states, group membership data, and multicast forwarding statistics. This MIB facilitates the management of IP multicast services by exposing OID-based metrics for profile definitions and operational status within the device's multicast routing and switching infrastructure.
Imported Objects
Objects
26 total| Object Name |
|---|
askeyMcastMibASKEY MULTICAST PROFILE MIB OID defines and documentation. MODULE-IDENTITY .1.3.6.1.4.1.3646.1300.2.5 |
mcastProfileObects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.5.1 |
mcastProfileCountThis object respresents the total count of configured multicast profiles.ro INTEGER .1.3.6.1.4.1.3646.1300.2.5.1.1 |
mcastProfileTableThis table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line. SEQUENCE OF McastProfileEntry .1.3.6.1.4.1.3646.1300.2.5.1.2 |
mcastProfileEntryEach entry consists of a list of parameters that represents the configuration of an multicast group. McastProfileEntry .1.3.6.1.4.1.3646.1300.2.5.1.2.1 |
mProfileIdThe unique sequential number for each profile entry, starting from 1 and end with 256, which is referenced one by one by mConfigProfileBitMap(256 bits) in mcastConfigLineEoaTablero INTEGER .1.3.6.1.4.1.3646.1300.2.5.1.2.1.1 |
mProfileNameThis object is used by the multicast configuration table in order to give a row of this table a specific name which is unique. For example: ESPN, HBO...etc.rw SnmpAdminString .1.3.6.1.4.1.3646.1300.2.5.1.2.1.2 |
mProfileIpAddrThe IP address of the multicast stream.rw IpAddress .1.3.6.1.4.1.3646.1300.2.5.1.2.1.3 |
mProfileRateThe maximum transmit data rate in Kbps applied to this multicast stream The specified data rate will be rounded to the largest multiple of 32.rw INTEGER .1.3.6.1.4.1.3646.1300.2.5.1.2.1.4 |
mProfilePriorityThe transmit priority applied to this multicast stream The value 0 indicateds the lowest priority, the value 3 indicateds the highest priorityrw INTEGER .1.3.6.1.4.1.3646.1300.2.5.1.2.1.5 |
mProfileRowStatusThis object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be `active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3646.1300.2.5.1.2.1.6 |
mcastConfigLineEoaTableThis table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line. SEQUENCE OF McastConfigLineEoaEntry .1.3.6.1.4.1.3646.1300.2.5.2 |
mcastConfigLineEoaEntryEach entry consists of a list of parameters that represents the configuration of an multicast group. McastConfigLineEoaEntry .1.3.6.1.4.1.3646.1300.2.5.2.1 |
mConfigVpiThe VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.rw INTEGER .1.3.6.1.4.1.3646.1300.2.5.2.1.1 |
mConfigVciThe VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.rw INTEGER .1.3.6.1.4.1.3646.1300.2.5.2.1.2 |
mConfigVlanIdIEEE 802.1q VLAN tag number.rw INTEGER .1.3.6.1.4.1.3646.1300.2.5.2.1.3 |
mConfigStreamNumThe maximum number of this multicast stream on the VCL linkrw INTEGER .1.3.6.1.4.1.3646.1300.2.5.2.1.4 |
mConfigServiceProfileEach line may book 256 program set, we use 256 bits to save what they bookedrw SnmpAdminString .1.3.6.1.4.1.3646.1300.2.5.2.1.5 |
mConfigRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3646.1300.2.5.2.1.6 |
mcastServiceObects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.5.3 |
mcastServiceProfileCountThis object respresents the total count of configured multicast service profiles.ro INTEGER .1.3.6.1.4.1.3646.1300.2.5.3.1 |
mcastServiceProfileTableThis table contains multicast service profiles and each service profile can be defined to represent a set of multicast profiles. One entry in this table reflects a service profile defined by a manager which can be used to assign to each the ADSL subscriber line. Maximum number of multicast service profiles is 60. SEQUENCE OF McastServiceProfileEntry .1.3.6.1.4.1.3646.1300.2.5.3.2 |
mcastServiceProfileEntryEach entry consists of a list of parameters that represents the configuration of an multicast group. McastServiceProfileEntry .1.3.6.1.4.1.3646.1300.2.5.3.2.1 |
mcastServiceProfileNameThe profile name is used to be the index of each serive profile. It must be unique and can contains '0'~'9', 'A'~'Z', 'a'~'z', '-','_','.','@' only. SnmpAdminString .1.3.6.1.4.1.3646.1300.2.5.3.2.1.1 |
mcastServiceProfileBitMapEach service profile may book a set of 800 program at most , we use 100 octets to save what it books.rw ProfileListBitmap .1.3.6.1.4.1.3646.1300.2.5.3.2.1.2 |
mcastServiceProfileRowStatusThe rowStatus of a mcast service profile. Set rowStatus to createAndGo to create a mcast service profile and set to destory to delete a mcast service profile. If the profile is used by any mcau entry, it is not allowed to be deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3646.1300.2.5.3.2.1.3 |
More MIBs from ASKEY
Browse all ASKEYMIBs →The ASKEY-SYSTEM-MIB provides SNMP management interfaces for ASKEY ADSL modems and routers, enabling the monitoring of DSL line parameters such as attenuation, signal-to-noise ratio, and interface status. It facilitates the collection of ADSL-specific performance counters and error statistics required for troubleshooting broadband connectivity issues on vendor hardware.
The ASKEY-ADSL-MIB module enables monitoring and management of ASKEY vendor ADSL modems and DSLAMs by exposing interface statistics, line status, and physical layer parameters via SNMP. It provides specific counters for DSL synchronization states, error rates, and data throughput to facilitate troubleshooting of broadband access links.
The ASKEY-ENTITY-ALARM-MIB extends the standard ENTITY-MIB to define, monitor, and report hardware alarm states and entity status conditions for ASKEY networking devices. It provides specific managed objects for tracking critical system events, such as interface failures, power supply anomalies, and environmental thresholds, within ASKEY-managed infrastructure.
The ASKEY-HARDWARE-INFORMATION-MIB enables SNMP-based monitoring of ASKEY network equipment by exposing operational status and telemetry for network cards, line cards, and fan modules. This module facilitates hardware health assessment and fault detection through standardized access to component-level inventory and state data.
The ASKEY-DSLAM-VC-VLAN-MIB enables monitoring and configuration of Virtual Circuit (VC) to Virtual LAN (VLAN) mapping tables on ASKEY DSL Access Multiplexer (DSLAM) hardware via SNMP. It exposes managed objects for tracking the binding relationships between ATM/PPPoE virtual circuits and their corresponding Ethernet VLAN identifiers to ensure proper traffic segregation and service delivery.
The ASKEY-DSLAM-INTERNET-GROUP-MANAGEMENT-PROTOCOL-PROXY-MIB configures and monitors IGMP proxy states and multicast group membership tables on ASKEY DSLAM hardware. It exposes specific metrics for multicast session management, including active group counts, interface bindings, and proxy forwarding status to ensure efficient bandwidth utilization in IPTV and multicast service deployments.