ASKEY-ADSL-MIB
AI MIB Summary
The ASKEY-ADSL-MIB module enables monitoring and management of ASKEY vendor ADSL modems and DSLAMs by exposing interface statistics, line status, and physical layer parameters via SNMP. It provides specific counters for DSL synchronization states, error rates, and data throughput to facilitate troubleshooting of broadband access links.
ASKEY ADSL MIB OID defines and documentation.
Main OID:
askeyADSLMib.1.3.6.1.4.1.3646.1300.2.2
111
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
111 total| Object Name |
|---|
askeyADSLMibASKEY ADSL MIB OID defines and documentation. MODULE-IDENTITY .1.3.6.1.4.1.3646.1300.2.2 |
askeyADSLMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.2.1 |
adslAlarmConfProfileExt2TableThis table extends the
adslLineAlarmConfProfileTable and provides
threshold parameters for all the counters defined
in this MIB module. SEQUENCE OF AdslAlarmConfProfileExt2Entry .1.3.6.1.4.1.3646.1300.2.2.1.1 |
adslAlarmConfProfileExt2EntryAn entry extends the adslLineAlarmConfProfileTable
defined in [RFC2662]. Each entry corresponds to
an ADSL alarm profile. AdslAlarmConfProfileExt2Entry .1.3.6.1.4.1.3646.1300.2.2.1.1.1 |
adslAtucThreshold1DayEsLThe first time the value of the corresponding
instance of adslAtucPerf1DayEsL reaches or
exceeds this value within a given 1-day
performance data collection period, an
adslAtucEsLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.4.1.3646.1300.2.2.1.1.1.1 |
adslAtucThreshold1DaySesLThe first time the value of the corresponding
instance of adslAtucPerf1DaySesL reaches or
exceeds this value within a given 1-day
performance data collection period, an
adslAtucSesLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.4.1.3646.1300.2.2.1.1.1.2 |
adslAtucThreshold1DayUasLThe first time the value of the corresponding
instance of adslAtucPerf1DayUasL reaches or
exceeds this value within a given 1-day
performance data collection period, an
adslAtucUasLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.4.1.3646.1300.2.2.1.1.1.3 |
adslAturThreshold1DayEsLThe first time the value of the corresponding
instance of adslAturPerf1DayEsL reaches or
exceeds this value within a given 1-day
performance data collection period, an
adslAturEsLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.4.1.3646.1300.2.2.1.1.1.4 |
adslAturThreshold1DaySesLThe first time the value of the corresponding
instance of adslAturPerf1DaySesL reaches or
exceeds this value within a given 1-day
performance data collection period, an
adslAturSesLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.4.1.3646.1300.2.2.1.1.1.5 |
adslAturThreshold1DayUasLThe first time the value of the corresponding
instance of adslAturPerf1DayUasL reaches or
exceeds this value within a given 1-day
performance data collection period, an
adslAturUasLThreshTrap notification will be
generated. The value '0' will disable the
notification. The default value of this
object is '0'.rw Integer32 .1.3.6.1.4.1.3646.1300.2.2.1.1.1.6 |
adslAtucBitAllocationTableThis table specify bit allocation table SEQUENCE OF AdslAtucBitAllocationEntry .1.3.6.1.4.1.3646.1300.2.2.1.2 |
adslAtucBitAllocationEntryAn entry in the adslBitAllocationTable. AdslAtucBitAllocationEntry .1.3.6.1.4.1.3646.1300.2.2.1.2.1 |
adslAtucBitAllocationNumberBit number for 1..512 tone. That is, the length must be 256ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.2.1.1 |
adslAturBitAllocationTableThis table specify bit allocation table SEQUENCE OF AdslAturBitAllocationEntry .1.3.6.1.4.1.3646.1300.2.2.1.3 |
adslAturBitAllocationEntryAn entry in the adslBitAllocationTable. AdslAturBitAllocationEntry .1.3.6.1.4.1.3646.1300.2.2.1.3.1 |
adslAturBitAllocationNumberBit number for 1..64 tone. That is, the length must be 64ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.3.1.1 |
adslLoopDiagObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.2.1.4 |
adslLoopDiagIfIndexThe ifIndex of the target interface to do loop diagnosticrw INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.4.1 |
adslLoopDiagProfileNameThe profile used to do loop diagnosticrw SnmpAdminString .1.3.6.1.4.1.3646.1300.2.2.1.4.2 |
adslLoopDiagActionSet to start to trigger ADSL2/ADSL2+ loop diagnostics.
Once loop diagnostic is started, the status will reflect in
adslLoopDiagCurrStatus.
Set to cancel can allow user to cancel an ongoing loop
diagnostics process.
Reading this variable is meaningless, the result will always be 0.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.4.3 |
adslLoopDiagLastStatusThis variable indicats status of last loop diagnostic on this line.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.4.4 |
adslLoopDiagFailReasonFail reason if loop diagnostic is failed.
no fail reason is reported (0)
IfIndex is not invalid (1)
used profile does not exist or is inactive (2)
line card does not exist (3)
HWAPI return error (4)
cancelled by user (5)
line initialization fail (6)
no atu-r is detected (7)
line doesn't enter show-time state (8)
timeout, result is not available (9)
port monitoring is performing, loop diag can not perform at the same time (10)ro INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.4.5 |
adslLoopDiagResultAtucAttainableRateValid only while adslLoopDiagCurrStatus is success.ro Gauge32 UNITS "bps" .1.3.6.1.4.1.3646.1300.2.2.1.4.6 |
adslLoopDiagResultAtucLoopAttenuationValid only while adslLoopDiagCurrStatus is success.ro Gauge32 .1.3.6.1.4.1.3646.1300.2.2.1.4.7 |
adslLoopDiagResultAtucSignalAttenuationValid only while adslLoopDiagCurrStatus is success.ro Gauge32 .1.3.6.1.4.1.3646.1300.2.2.1.4.8 |
adslLoopDiagResultAtucSnrMarginValid only while adslLoopDiagCurrStatus is success.ro INTEGER (-640..640) UNITS "tenth dB" .1.3.6.1.4.1.3646.1300.2.2.1.4.9 |
adslLoopDiagResultAtucTxPowerValid only while adslLoopDiagCurrStatus is success.ro INTEGER (-310..310) UNITS "tenth dBm" .1.3.6.1.4.1.3646.1300.2.2.1.4.10 |
adslLoopDiagResultAturAttainableRateValid only while adslLoopDiagCurrStatus is success.ro Gauge32 UNITS "bps" .1.3.6.1.4.1.3646.1300.2.2.1.4.11 |
adslLoopDiagResultAturLoopAttenuationValid only while adslLoopDiagCurrStatus is success.ro Gauge32 .1.3.6.1.4.1.3646.1300.2.2.1.4.12 |
adslLoopDiagResultAturSignalAttenuationValid only while adslLoopDiagCurrStatus is success.ro Gauge32 .1.3.6.1.4.1.3646.1300.2.2.1.4.13 |
adslLoopDiagResultAturSnrMarginValid only while adslLoopDiagCurrStatus is success.ro INTEGER (-640..640) UNITS "tenth dB" .1.3.6.1.4.1.3646.1300.2.2.1.4.14 |
adslLoopDiagResultAturTxPowerValid only while adslLoopDiagCurrStatus is success.ro INTEGER (-310..310) UNITS "tenth dBm" .1.3.6.1.4.1.3646.1300.2.2.1.4.15 |
adslLoopDiagResultDsHlogMThis object provides an array of downstream Hlog(f) m.
The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~511.
To get real value of Hlog(f), it is caculated as (6-m(i)/10).
A special value 1023 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the attenuation is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.4.16 |
adslLoopDiagResultUsHlogMThis object provides an array of upstream Hlog(f) m.
The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~63.
To get real value of Hlog(f), it is caculated as (6-m(i)/10).
A special value 1023 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the attenuation is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.4.17 |
adslLoopDiagResultDsQuietLinePsdNThis object provides an array of downstream quiet line noise PSD n.
The n of subcarrier(i) is Octect(i), i=0~511.
To get real value of QLN(f), it is caculated as (-23-n(i)/2).
A special value 255 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the noise PSD is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.4.18 |
adslLoopDiagResultUsQuietLinePsdNThis object provides an array of upstream quiet line noise PSD n.
The n of subcarrier(i) is Octect(i), i=0~63.
To get real value of QLN(f), it is caculated as (-23-n(i)/2).
A special value 255 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the noise PSD is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.4.19 |
adslLoopDiagResultDsSnrNThis table used for ADSL2/ADSL2+ downstream loop diagnostics SNR.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.4.20 |
adslLoopDiagResultUsSnrNThis table used for ADSL2/ADSL2+ upstream loop
diagnostics SNR.
value of subcarrier(i) is Octect(i)ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.4.21 |
askeyADSLConfProfileExtTableThis parameter represents the maximum nominal transmit PSD
in the downstream direction during initialization and showtime (in dBm/Hz).
It ranges from -60 to -40 dBm/Hz, with 0.1 dB steps. SEQUENCE OF AskeyADSLConfProfileExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.5 |
askeyADSLConfProfileExtEntry AskeyADSLConfProfileExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.5.1 |
adslAtucConfMaxNominalPSDatu-c max nominal power spectrum desityrw INTEGER(-400..40) UNITS "0.1 dBm per Hz" .1.3.6.1.4.1.3646.1300.2.2.1.5.1.1 |
adslAturConfMaxNominalPSDatu-r max nominal power spectrum desityrw INTEGER(-400..40) UNITS "0.1 dBm per Hz" .1.3.6.1.4.1.3646.1300.2.2.1.5.1.2 |
adslConfSRAModeEnabledThe seamless rate adaptive mode can force dynamic rate mode changing rate
at runtime without retraining.
This object is only applies to dynamic rate mode.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.5.1.3 |
adslConfPwrMgtL2ModeLine power management L2 mode.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.5.1.4 |
adslConfPwrMgtL2MinRateminimum rate and low-bound to data rate for power management L2 state.rw Unsigned32 .1.3.6.1.4.1.3646.1300.2.2.1.5.1.5 |
adslConfPwrMgtL2MaxRatemaximum rate to data rate for power management L2 state.rw Unsigned32 .1.3.6.1.4.1.3646.1300.2.2.1.5.1.6 |
adslConfPwrMgtLowerL2ContinuousTimeThe continuous time of line rate lower than L2 low-bound.
Line can start transferring into L2 after this time pass.rw INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.5.1.7 |
adslConfPwrMgtL0TimeThe minimum time in L0 state before line starts to check L2 criteria.rw INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.5.1.8 |
adslConfPwrMgtL3AcceptedThis object indicates whether the ADSL lines accept CPE power
management L3 request. If it is, the ADSL lines applied this
profile will accept request from CPE and transfer their power
management state into L3 by the CPE request.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.5.1.9 |
adslConfAtucMinINPATUC(i.e. downstream) minimum INP(Impulse Noise Protect)
capability. The object value indicates the multiple of INP
symbol. For example, 'time-4' means four times.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.5.1.10 |
adslConfAturMinINPATUR(i.e. upstream) minimum INP(Impulse Noise Protect)
capability. The object value indicates the multiple of INP
symbol. For example, 'time-4' means four times.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.5.1.11 |
askeyAdslAtucPerfExtTableThis table extends the adslAtucPerfDataTable to provide
received and transmitted user cell counters, code violation
and fail initialization counts. SEQUENCE OF AskeyAdslAtucPerfExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.10 |
askeyAdslAtucPerfExtEntryAn entry extends the adslAtucPerfDataEntry defined in [RFC2662].
Each entry corresponds to an ADSL interface. AskeyAdslAtucPerfExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.10.1 |
aAdslAtucPerfCurr15MinReceivedCellsCount of all user cells received on this interface
within the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.1 |
aAdslAtucPerfCurr15MinTransmittedCellsCount of all user cells transmitted on this
interface within the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.2 |
aAdslAtucPerfCurr15MinCodeViolationCount of code violations on this
interface within the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.3 |
aAdslAtucPerfCurr15MinFailInitsCount of failed initializations on this
interface within the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.4 |
aAdslAtucPerfCurr1DayReceivedCellsCount of all user cells received on this
interface during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed.ro AdslPerfCurrDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.5 |
aAdslAtucPerfCurr1DayTransmittedCellsCount of all user cells transmitted on this
interface during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed.ro AdslPerfCurrDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.6 |
aAdslAtucPerfCurr1DayCodeViolationCount of code violations on this
interface during the current day.ro AdslPerfCurrDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.7 |
aAdslAtucPerfCurr1DayFailInitsCount of full initializations on this
interface during the current day.ro AdslPerfCurrDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.8 |
aAdslAtucPerfPrev1DayReceivedCellsCount of all user cells received on this
interface within the most recent previous 1-day
period.ro AdslPerfPrevDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.9 |
aAdslAtucPerfPrev1DayTransmittedCellsCount of all user cells transmitted on this
interface within the most recent previous 1-day
period.ro AdslPerfPrevDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.10 |
aAdslAtucPerfPerf1DayCodeViolationCount of code violations on this
interface within the most recent previous 1-day
period.ro AdslPerfPrevDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.11 |
aAdslAtucPerfPerf1DayFailInitsCount of full initializations on this
interface within the most recent previous 1-day
period.ro AdslPerfPrevDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.10.1.12 |
askeyAdslAturPerfExtTableThis table extends the adslAturPerfDataTable to provide
more performance information. SEQUENCE OF AskeyAdslAturPerfExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.11 |
askeyAdslAturPerfExtEntryAn entry extends the adslAturPerfDataEntry defined in [RFC2662].
Each entry corresponds to an ADSL interface. AskeyAdslAturPerfExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.11.1 |
aAdslAturPerfCurr15MinCodeViolationCount of code violations on this interface
within the current 15 minute interval.ro PerfCurrentCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.11.1.1 |
aAdslAturPerfCurr1DayCodeViolationCount of code violations on this interface
within the current 1 day interval.ro AdslPerfCurrDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.11.1.2 |
aAdslAturPerfPerf1DayCodeViolationCount of code violations on this interface within
the most recent previous 1-day period.ro AdslPerfPrevDayCount (ADSL-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.11.1.3 |
askeyAdslAtucIntervalExtTableThis table extends the adslAtucIntervalTable to provide
more performance informations SEQUENCE OF AskeyAdslAtucIntervalExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.12 |
askeyAdslAtucIntervalExtEntryAn entry extends the adslAtucIntervalEntry defined in [RFC2662]. AskeyAdslAtucIntervalExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.12.1 |
aAdslAtucIntervalReceivedCellsCount of all user cells received on this interface
during this interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.12.1.1 |
aAdslAtucIntervalTransmittedCellsCount of all user cells transmitted on this
interface during this interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.12.1.2 |
aAdslAtucIntervalCodeViolationCount of code violations on this
interface during this interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.12.1.3 |
aAdslAtucIntervalFailInitsCount of full initializations on this
interface during this interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.12.1.4 |
askeyAdslAturIntervalExtTableThis table extends the adslAturIntervalTable to provide
more perfomance information. SEQUENCE OF AskeyAdslAturIntervalExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.13 |
askeyAdslAturIntervalExtEntryAn entry extends the adslAturIntervalEntry defined in [RFC2662]. AskeyAdslAturIntervalExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.13.1 |
aAdslAturIntervalCodeViolationCount of code violations on this interface during this interval.ro PerfIntervalCount (PerfHist-TC-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.13.1.1 |
adslPortMonitorObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.2.1.14 |
adslPortMonitorIfIndexThe ifIndex of target adsl port to do port monitor.rw INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.14.1 |
adslPortMonitorActionSet to start to port monitor.
Once loop diagnostic is started, the status will reflect in
adslPortMonitorCurrStatus.
Set to cancel can allow user to cancel an ongoing loop
diagnostics process.
Reading this variable is meaningless, the result will always be 0.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.14.2 |
adslPortMonitorLastStatusThis variable indicats status of last time port monitor is performed.
If adslPortMonitorIfIndex is changed, this value wil reset to noStatus.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.14.3 |
adslPortMonitorFailReasonThe fail reason of last time port monitor is failed.ro INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.14.4 |
adslPortMonitorResultDsHlogMThis object provides an array of downstream Hlog(f) m.
The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~511.
To get real value of Hlog(f), it is caculated as (6-m(i)/10).
A special value 1023 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the attenuation is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.14.5 |
adslPortMonitorResultUsHlogMThis object provides an array of upstream Hlog(f) m.
The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~63.
To get real value of Hlog(f), it is caculated as (6-m(i)/10).
A special value 1023 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the attenuation is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.14.6 |
adslPortMonitorResultDsQuietLinePsdNThis object provides an array of downstream quiet line noise PSD n.
The n of subcarrier(i) is Octect(i), i=0~511.
To get real value of QLN(f), it is caculated as (-23-n(i)/2).
A special value 255 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the noise PSD is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.14.7 |
adslPortMonitorResultUsQuietLinePsdNThis object provides an array of upstream quiet line noise PSD n.
The n of subcarrier(i) is Octect(i), i=0~63.
To get real value of QLN(f), it is caculated as (-23-n(i)/2).
A special value 255 indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the noise PSD is
out of range to be represented.ro OCTET STRING .1.3.6.1.4.1.3646.1300.2.2.1.14.8 |
adslSingleEndLoopTestObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.2.1.15 |
adslSingleEndLoopTestIfIndexThe ifIndex of target adsl port to do SELT.rw INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.15.1 |
adslSingleEndLoopTestActionSet to start to SELT.
Once loop diagnostic is started, the status will reflect in
adslPortMonitorCurrStatus.
Reading this variable is meaningless, the result will always be 0.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.15.2 |
adslSingleEndLoopTestLastStatusThis variable indicats status of last time SELT is performed.
If adslSingleEndLoopTestIfIndex is changed, this value wil reset to noStatus.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.15.3 |
adslSingleEndLoopTestFailReasonFail reason if single end loop test is failed.
no fail reason is reported (0)
IfIndex is not invalid (1)
line card does not exist (3)
HWAPI return error (4)
timeout, result is not available (9)
port monitoring is performing, loop diag can not perform at the same time (10)ro INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.15.4 |
adslSingleEndLoopTestResultCableTypeThis object provides an the line type.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.15.5 |
adslSingleEndLoopTestResultLoopLengthThis object provides line length.ro INTEGER UNITS "ft." .1.3.6.1.4.1.3646.1300.2.2.1.15.6 |
askeyADSLLineStatusExtTableThis table is a adslLineTable extended table for line status. SEQUENCE OF AskeyADSLLineStatusExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.16 |
askeyADSLLineStatusExtEntryThe entry into extended ADSL line status table. AskeyADSLLineStatusExtEntry .1.3.6.1.4.1.3646.1300.2.2.1.16.1 |
askeyADSLLineStandardCurrent ADSL line standard.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.16.1.1 |
askeyADSLLinePwrMgtModeCurrent power management mode.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.16.1.2 |
askeyADSLLinePwrMgtStateCurrent power management state.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.16.1.3 |
askeyADSLLinePwrMgtTransManualTry to transit immediately into power management
L0, L2, or L3 by manual.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.16.1.4 |
askeyADSLLineAtucCurrINPThis line ATU-C(down stream) current INP(Impulse Noise Protected)
value. This value is 0.01 symbol times.ro INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.16.1.5 |
askeyADSLLineAturCurrINPThis line ATU-R(up stream) current INP(Impulse Noise Protected)
value. This value is 0.01 symbol times.ro INTEGER .1.3.6.1.4.1.3646.1300.2.2.1.16.1.6 |
remoteAskeyCPE OBJECT IDENTIFIER .1.3.6.1.4.1.3646.1300.2.2.1.17 |
askeyCPEWirelessTableA table indicates remote CPE wireless objects for each line. SEQUENCE OF AskeyCPEWirelessEntry .1.3.6.1.4.1.3646.1300.2.2.1.17.2 |
askeyCPEWirelessEntryRemote CPE wireless objects. AskeyCPEWirelessEntry .1.3.6.1.4.1.3646.1300.2.2.1.17.2.1 |
askeyCPEWirelessAdminStateRemote CPE wireless administrative state.rw Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.17.2.1.1 |
askeyCPEWirelessOperStateRemote CPE wireless operational state.ro Enumeration .1.3.6.1.4.1.3646.1300.2.2.1.17.2.1.2 |
askeyADSLCardFilterTableThis table is a ADSL card(slot) filter status. SEQUENCE OF AskeyADSLCardFilterEntry .1.3.6.1.4.1.3646.1300.2.2.1.18 |
askeyADSLCardFilterEntryThe entry indicates ADSL card filter status table. AskeyADSLCardFilterEntry .1.3.6.1.4.1.3646.1300.2.2.1.18.1 |
dsBroadcastFilterVLANIDThe object indicates the VLAN ID configuration for down stream
broadcast filters on the specifed ADSL card.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3646.1300.2.2.1.18.1.1 |