ADTRAN-ATLAS-T1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADTRAN-ATLAS-T1-MIB.
73
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
adtran OBJECT IDENTIFIER .1.3.6.1.4.1.664 |
RFC1155-SMI Unknown .1.3.6.1.4.1.664 |
adMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.664.2 |
adATLASmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154 |
adATLAST1RxYellowActiveThis trap indicates a yellow alarm is being received. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400900 |
adATLAST1RxYellowInActiveThis trap indicates a yellow alarm is no longer being received. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400901 |
adATLAST1RxAISActiveThis trap indicates an alarm indication signal (AIS) is being received. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400902 |
adATLAST1RxAISInActiveThis trap indicates an alarm indication signal (AIS) is no longer being received. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400903 |
adATLAST1RedAlarmActiveThis trap indicates a red alarm is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400904 |
adATLAST1RedAlarmInActiveThis trap indicates a red alarm is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400905 |
adATLAST1LOSActiveThis trap indicates a loss of signal (LOS) is active. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400906 |
adATLAST1LOSInActiveThis trap indicates a loss of signal (LOS) is inactive. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400907 |
adATLAST1TxAISActiveThis trap indicates an alarm indication signal (LOS) is being sent. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400908 |
adATLAST1TxAISInActiveThis trap indicates an alarm indication signal (LOS) is no longer being sent. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400909 |
adATLAST1TxYellowActiveThis trap indicates a yellow alarm is being sent. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400910 |
adATLAST1TxYellowInActiveThis trap indicates a yellow alarm is no longer being sent. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400911 |
adATLAST1CurrentESThis trap indicates that the current interval errored second
threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400912 |
adATLAST1CurrentSESThis trap indicates that the current interval severely errored second
threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400913 |
adATLAST1CurrentSEFSThis trap indicates that the current interval severely errored
framing second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400914 |
adATLAST1CurrentUASThis trap indicates that the current interval unavailable
second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400915 |
adATLAST1CurrentCSSThis trap indicates that the current interval controlled slip
second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400916 |
adATLAST1CurrentPCVThis trap indicates that the current interval path coding violations
threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400917 |
adATLAST1CurrentLESThis trap indicates that the current interval line errored
second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400918 |
adATLAST1CurrentLCVThis trap indicates that the current interval line code
violations threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400919 |
adATLAST1TotalESThis trap indicates that the total errored second
threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400920 |
adATLAST1TotalSESThis trap indicates that the total severely errored second
threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400921 |
adATLAST1TotalSEFSThis trap indicates that the total severely errored
framing second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400922 |
adATLAST1TotalUASThis trap indicates that the total unavailable
second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400923 |
adATLAST1TotalCSSThis trap indicates that the total controlled slip
second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400924 |
adATLAST1TotalPCVThis trap indicates that the total path coding violations
threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400925 |
adATLAST1TotalLESThis trap indicates that the total line errored
second threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400926 |
adATLAST1TotalLCVThis trap indicates that the total line code
violations threshold has been exceeded. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400927 |
adGenATLASmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1 |
adATLAST1mg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.9 |
adATLAST1IfNumberThe number of T1 ports (regardless of their current
state) present on this system.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.1 |
adATLAST1IfTableThe Atlas T1 Interface Status Table SEQUENCE OF AdATLAST1IfEntry .1.3.6.1.4.1.664.2.154.1.9.2 |
adATLAST1IfEntryAn entry in the Atlas T1 Interface Status Table AdATLAST1IfEntry .1.3.6.1.4.1.664.2.154.1.9.2.1 |
adATLAST1IfIndexThis variable indicates the interface number of a
particular T1 port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.2.1.1 |
adATLAST1IfSlotNumThis variable indicates the slot number of a
particular ATLAS module with a T1 interface.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.2.1.2 |
adATLAST1IfPortNumThis variable indicates the port number of a
particular T1 interface on an ATLAS module.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.2.1.3 |
adATLAST1IfAlarmStatusThis variable shows the status of each alarm by
setting a bit. If the bit is set the alarm is
active. Multiple bits can be set at one time.
Bit # ALARM
0x01 LOS
0x02 Red
0x04 Yellow
0x08 Blue
0x10 DS0ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.2.1.4 |
adATLAST1IfRxLevelThis variable represents the recieved signal strength
in dB.ro Enumeration .1.3.6.1.4.1.664.2.154.1.9.2.1.5 |
adATLAST1IfCurrentLOFCThis variable indicates the value of the loss of
frame count for the current 15 minute interval.ro Counter .1.3.6.1.4.1.664.2.154.1.9.2.1.6 |
adATLAST1IfTotalLOFCThis variable indicates the value of the loss of
frame count for the current 24 hours.ro Counter .1.3.6.1.4.1.664.2.154.1.9.2.1.7 |
adATLAST1IfResetPRMStatsThis variable resets the performance monitoring
statistics for all of the intervals: current, 15 min,
and total.rw Enumeration .1.3.6.1.4.1.664.2.154.1.9.2.1.8 |
adATLAST1IfIntervalTableThe Atlas T1 Interface Interval Performance Table SEQUENCE OF AdATLAST1IfIntervalEntry .1.3.6.1.4.1.664.2.154.1.9.3 |
adATLAST1IfIntervalEntryAn entry in the Atlas T1 Interface Interval Performance Table AdATLAST1IfIntervalEntry .1.3.6.1.4.1.664.2.154.1.9.3.1 |
adATLAST1IfIntervalIndexThis variable indicates the interface number of a
particular T1 port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.3.1.1 |
adATLAST1IfIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.3.1.2 |
adATLAST1IfIntervalLOFCThe Loss of Frame Count encountered by a DS1
interface in one of the previous 96, individual
15 minute, intervals.ro Counter .1.3.6.1.4.1.664.2.154.1.9.3.1.3 |
adATLAST1IfDS0TableThe Atlas T1 Interface DS0 Table SEQUENCE OF AdATLAST1IfDS0Entry .1.3.6.1.4.1.664.2.154.1.9.4 |
adATLAST1IfDS0EntryAn entry in the Atlas T1 Interface DS0 Table AdATLAST1IfDS0Entry .1.3.6.1.4.1.664.2.154.1.9.4.1 |
adATLAST1IfDS0IndexThis variable indicates the interface number of a
particular T1 port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.4.1.1 |
adATLAST1IfDS0StatusThis variable shows the overall status of each DS0.
There are 24 octets, each corresponding to a single
DS0.
These are the values for the different status states
in each octet:
Value(decimal) Status
0 Unallocated
1 Inactive
2 Signalling Mismatch
3 Active B Channel
4 Active D Channel
5 Maintenance
6 Dedicated(Nailed)
7 Offhook-Originate(RBS)
8 Ringing(RBS)-Restart(ISDN)
9 Waiting Dialtonero OCTET STRING .1.3.6.1.4.1.664.2.154.1.9.4.1.2 |
adATLAST1IfDS0AlarmThis variable shows the overall alarm status of each
DS0. There are 24 octets, each corresponding to a
single DS0.
These are the values for the different alarm states
in each octet:
Value(decimal) Alarm
0 No Alarm
1 D Channel Alarm
2 Frame Alarm
3 TBOP Alarm
4 PPP Alarmro OCTET STRING ( SIZE (24)) .1.3.6.1.4.1.664.2.154.1.9.4.1.3 |
adATLAST1IfDS0RxSignalStatusAThis variable shows the status of the receive
signal's A bit in each DS0. There are 24 octets,
each corresponding to a single DS0.
These are the values for the different status states
in each octet:
Value(decimal) Status
0 0
1 1
2 Port Not Activero OCTET STRING .1.3.6.1.4.1.664.2.154.1.9.4.1.4 |
adATLAST1IfDS0RxSignalStatusBThis variable shows the status of the receive
signal's B bit in each DS0. There are 24 octets,
each corresponding to a single DS0.
These are the values for the different status states
in each octet:
Value(decimal) Status
0 0
1 1
2 Port Not Activero OCTET STRING .1.3.6.1.4.1.664.2.154.1.9.4.1.5 |
adATLAST1IfDS0TxSignalStatusAThis variable shows the status of the transmit
signal's A bit in each DS0. There are 24 octets,
each corresponding to a single DS0.
These are the values for the different status states
in each octet:
Value(decimal) Status
0 0
1 1
2 Transparent
3 Port Not Activero OCTET STRING .1.3.6.1.4.1.664.2.154.1.9.4.1.6 |
adATLAST1IfDS0TxSignalStatusBThis variable shows the status of the transmit
signal's B bit in each DS0. There are 24 octets,
each corresponding to a single DS0.
These are the values for the different status states
in each octet:
Value(decimal) Status
0 0
1 1
2 Transparent
3 Port Not Activero OCTET STRING .1.3.6.1.4.1.664.2.154.1.9.4.1.7 |
adATLAST1TstTableThe Atlas T1 Test Table SEQUENCE OF AdATLAST1TstEntry .1.3.6.1.4.1.664.2.154.1.9.5 |
adATLAST1TstEntryAn entry in the Atlas T1 Test Table AdATLAST1TstEntry .1.3.6.1.4.1.664.2.154.1.9.5.1 |
adATLAST1TstIndexThis variable indicates the interface number of a
particular T1 port within the ATLAS product.
This number will be the same as the ifIndex located in
the MIB-II interface table.ro INTEGER .1.3.6.1.4.1.664.2.154.1.9.5.1.1 |
adATLAST1TstLocalLpBkThis variable sets the status of the local loopback
for sending test signals.rw Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.2 |
adATLAST1TstRemoteLpBkThis variable sets the status of the remote loopback
for sending test signals.rw Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.3 |
adATLAST1TstRemoteLpBkStatusThis variable indicates the current remote loopback
status.ro Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.4 |
adATLAST1TstPatternThis variable sets the pattern to be sent for
testing.rw Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.5 |
adATLAST1TstPatternSyncThis variable shows whether there is sync between
transmitting and recieving the test pattern.ro Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.6 |
adATLAST1TstPatternSyncLostThis variable shows whether sync has been lost since
it was last cleared.ro Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.7 |
adATLAST1TstPatternESsThis variable shows the amount of errored seconds
since it was last cleared.ro Counter .1.3.6.1.4.1.664.2.154.1.9.5.1.8 |
adATLAST1TstPatternBESsThis variable shows the amount of bursty errored
seconds since it was last cleared.ro Counter .1.3.6.1.4.1.664.2.154.1.9.5.1.9 |
adATLAST1TstPatternSESsThis variable shows the amount of severely errored
seconds since it was last cleared.ro Counter .1.3.6.1.4.1.664.2.154.1.9.5.1.10 |
adATLAST1TstClearResultsThis variable is used to clear the results of the
test.rw Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.11 |
adATLAST1TstInjectErrorThis variable is used to inject an error in the test
pattern.rw Enumeration .1.3.6.1.4.1.664.2.154.1.9.5.1.12 |