RFC1406-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
101
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
101 total| Object Name |
|---|
ds1 OBJECT IDENTIFIER .1.3.6.1.2.1.10.18 |
RFC1213-MIB Unknown .1.3.6.1.2.1.10.18 |
dsx1ConfigTableThe DS1 Configuration table. SEQUENCE OF Dsx1ConfigEntry .1.3.6.1.2.1.10.18.6 |
dsx1ConfigEntryAn entry in the DS1 Configuration table. Dsx1ConfigEntry .1.3.6.1.2.1.10.18.6.1 |
dsx1LineIndexThis object is the identifier of a DS1 Inter-
face on a managed device. If there is an ifEn-
try that is directly associated with this and
only this DS1 interface, it should have the
same value as ifIndex. Otherwise, the value
exceeds ifNumber, and is a unique identifier
following this rule: inside interfaces (e.g.,
equipment side) with even numbers and outside
interfaces (e.g., network side) with odd
numbers.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.6.1.1 |
dsx1IfIndexThis value for this object is equal to the
value of ifIndex from the Interfaces table of
MIB II (RFC 1213).ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.6.1.2 |
dsx1TimeElapsedThe number of seconds that have elapsed since
the beginning of the current error-measurement
period.ro INTEGER .1.3.6.1.2.1.10.18.6.1.3 |
dsx1ValidIntervalsThe number of previous intervals for which
valid data was collected. The value will be 96
unless the interface was brought on-line within
the last 24 hours, in which case the value will
be the number of complete 15 minute intervals
the since interface has been online.ro INTEGER .1.3.6.1.2.1.10.18.6.1.4 |
dsx1LineTypeThis variable indicates the variety of DS1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics. The values, in sequence, describe:
TITLE: SPECIFICATION:
dsx1ESF Extended SuperFrame DS1
dsx1D4 AT&T D4 format DS1
dsx1E1 CCITT Recommendation G.704
(Table 4a)
dsx1E1-CRC CCITT Recommendation G.704
(Table 4b)
dsxE1-MF G.704 (Table 4a) with TS16
multiframing enabled
dsx1E1-CRC-MF G.704 (Table 4b) with TS16
multiframing enabledrw Enumeration .1.3.6.1.2.1.10.18.6.1.5 |
dsx1LineCodingThis variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.
dsx1JBZS refers the Jammed Bit Zero Suppres-
sion, in which the AT&T specification of at
least one pulse every 8 bit periods is literal-
ly implemented by forcing a pulse in bit 8 of
each channel. Thus, only seven bits per chan-
nel, or 1.344 Mbps, is available for data.
dsx1B8ZS refers to the use of a specified pat-
tern of normal bits and bipolar violations
which are used to replace a sequence of eight
zero bits.
ANSI Clear Channels may use dsx1ZBTSI, or Zero
Byte Time Slot Interchange.
E1 links, with or without CRC, use dsx1HDB3 or
dsx1AMI.
dsx1AMI refers to a mode wherein no zero code
suppression is present and the line encoding
does not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density re-
quirements, such as inverting HDLC data.rw Enumeration .1.3.6.1.2.1.10.18.6.1.6 |
dsx1SendCodeThis variable indicates what type of code is
being sent across the DS1 interface by the dev-
ice. The values mean:
dsx1SendNoCode
sending looped or normal data
dsx1SendLineCode
sending a request for a line loopback
dsx1SendPayloadCode
sending a request for a payload loopback
dsx1SendResetCode
sending a loopback termination request
dsx1SendQRS
sending a Quasi-Random Signal (QRS) test
pattern
dsx1Send511Pattern
sending a 511 bit fixed test pattern
dsx1Send3in24Pattern
sending a fixed test pattern of 3 bits set
in 24
dsx1SendOtherTestPattern
sending a test pattern other than those
described by this objectrw Enumeration .1.3.6.1.2.1.10.18.6.1.7 |
dsx1CircuitIdentifierThis variable contains the transmission
vendor's circuit identifier, for the purpose of
facilitating troubleshooting.rw DisplayString .1.3.6.1.2.1.10.18.6.1.8 |
dsx1LoopbackConfigThis variable represents the loopback confi-
guration of the DS1 interface. Agents support-
ing read/write access should return badValue in
response to a requested loopback state that the
interface does not support. The values mean:
dsx1NoLoop
Not in the loopback state. A device that
is not capable of performing a loopback on
the interface shall always return this as
it's value.
dsx1PayloadLoop
The received signal at this interface is
looped through the device. Typically the
received signal is looped back for re-
transmission after it has passed through
the device's framing function.
dsx1LineLoop
The received signal at this interface does
not go through the device (minimum pene-
tration) but is looped back out.
dsx1OtherLoop
Loopbacks that are not defined here.rw Enumeration .1.3.6.1.2.1.10.18.6.1.9 |
dsx1LineStatusThis variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
The dsx1LineStatus is a bit map represented as a sum,
therefore, it can represent multiple failures (alarms) and
a LoopbackState simultaneously.
dsx1NoAlarm should be set if and only if no other flag is
set.
If the dsx1LoopbackState bit is set, the loopback in ef-
fect can be determined from the dsx1LoopbackConfig object.
The various bit positions are:
1 dsx1NoAlarm No Alarm Present
2 dsx1RcvFarEndLOF Far end LOF (a.k.a., Yellow Alarm)
4 dsx1XmtFarEndLOF Near end sending LOF Indication
8 dsx1RcvAIS Far end sending AIS
16 dsx1XmtAIS Near end sending AIS
32 dsx1LossOfFrame Near end LOF (a.k.a., Red Alarm)
64 dsx1LossOfSignal Near end Loss Of Signal
128 dsx1LoopbackState Near end is looped
256 dsx1T16AIS E1 TS16 AIS
512 dsx1RcvFarEndLOMF Far End Sending TS16 LOMF
1024 dsx1XmtFarEndLOMF Near End Sending TS16 LOMF
2048 dsx1RcvTestCode Near End detects a test code
4096 dsx1OtherFailure any line status not defined herero INTEGER .1.3.6.1.2.1.10.18.6.1.10 |
dsx1SignalMode'none' indicates that no bits are reserved for
signaling on this channel.
'robbedBit' indicates that T1 Robbed Bit Sig-
naling is in use.
'bitOriented' indicates that E1 Channel Asso-
ciated Signaling is in use.
'messageOriented' indicates that Common Chan-
nel Signaling is in use either on channel 16 of
an E1 link or channel 24 of a T1.rw Enumeration .1.3.6.1.2.1.10.18.6.1.11 |
dsx1TransmitClockSourceThe source of Transmit Clock.
'loopTiming' indicates that the recovered re-
ceive clock is used as the transmit clock.
'localTiming' indicates that a local clock
source is used.
'throughTiming' indicates that recovered re-
ceive clock from another interface is used as
the transmit clock.rw Enumeration .1.3.6.1.2.1.10.18.6.1.12 |
dsx1FdlThis bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.rw Enumeration .1.3.6.1.2.1.10.18.6.1.13 |
dsx1CurrentTableThe DS1 Current table. SEQUENCE OF Dsx1CurrentEntry .1.3.6.1.2.1.10.18.7 |
dsx1CurrentEntryAn entry in the DS1 Current table. Dsx1CurrentEntry .1.3.6.1.2.1.10.18.7.1 |
dsx1CurrentIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.7.1.1 |
dsx1CurrentESsThe number of Errored Seconds, encountered by
a DS1 interface in the current 15 minute inter-
val.ro Gauge .1.3.6.1.2.1.10.18.7.1.2 |
dsx1CurrentSESsThe number of Severely Errored Seconds encoun-
tered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.3 |
dsx1CurrentSEFSsThe number of Severely Errored Framing Seconds
encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.4 |
dsx1CurrentUASsThe number of Unavailable Seconds encountered
by a DS1 interface in the current 15 minute in-
terval.ro Gauge .1.3.6.1.2.1.10.18.7.1.5 |
dsx1CurrentCSSsThe number of Controlled Slip Seconds encoun-
tered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.6 |
dsx1CurrentPCVsThe number of Path Coding Violations encoun-
tered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.7 |
dsx1CurrentLESsThe number of Line Errored Seconds encountered
by a DS1 interface in the current 15 minute in-
terval.ro Gauge .1.3.6.1.2.1.10.18.7.1.8 |
dsx1CurrentBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.9 |
dsx1CurrentDMsThe number of Degraded Minutes (DMs) encoun-
tered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.10 |
dsx1CurrentLCVsThe number of Line Code Violations (LCVs) en-
countered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.7.1.11 |
dsx1IntervalTableThe DS1 Interval table. SEQUENCE OF Dsx1IntervalEntry .1.3.6.1.2.1.10.18.8 |
dsx1IntervalEntryAn entry in the DS1 Interval table. Dsx1IntervalEntry .1.3.6.1.2.1.10.18.8.1 |
dsx1IntervalIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.8.1.1 |
dsx1IntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.2.1.10.18.8.1.2 |
dsx1IntervalESsThe number of Errored Seconds encountered by a
DS1 interface in one of the previous 96, indi-
vidual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.3 |
dsx1IntervalSESsThe number of Severely Errored Seconds encoun-
tered by a DS1 interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.4 |
dsx1IntervalSEFSsThe number of Severely Errored Framing Seconds
encountered by a DS1 interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.5 |
dsx1IntervalUASsThe number of Unavailable Seconds encountered
by a DS1 interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.6 |
dsx1IntervalCSSsThe number of Controlled Slip Seconds encoun-
tered by a DS1 interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.7 |
dsx1IntervalPCVsThe number of Path Coding Violations encoun-
tered by a DS1 interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.8 |
dsx1IntervalLESsThe number of Line Errored Seconds encountered
by a DS1 interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.9 |
dsx1IntervalBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.10 |
dsx1IntervalDMsThe number of Degraded Minutes (DMs) encoun-
tered by a DS1 interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.8.1.11 |
dsx1IntervalLCVsThe number of Line Code Violations (LCVs) en-
countered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.8.1.12 |
dsx1TotalTableThe DS1 Total table. 24 hour interval. SEQUENCE OF Dsx1TotalEntry .1.3.6.1.2.1.10.18.9 |
dsx1TotalEntryAn entry in the DS1 Total table. Dsx1TotalEntry .1.3.6.1.2.1.10.18.9.1 |
dsx1TotalIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.9.1.1 |
dsx1TotalESsThe number of Errored Seconds encountered by a
DS1 interface in the previous 24 hour intervalro Gauge .1.3.6.1.2.1.10.18.9.1.2 |
dsx1TotalSESsThe number of Severely Errored Seconds encoun-
tered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.3 |
dsx1TotalSEFSsThe number of Severely Errored Framing Seconds
encountered by a DS1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.4 |
dsx1TotalUASsThe number of Unavailable Seconds encountered
by a DS1 interface in the previous 24 hour in-
terval.ro Gauge .1.3.6.1.2.1.10.18.9.1.5 |
dsx1TotalCSSsThe number of Controlled Slip Seconds encoun-
tered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.6 |
dsx1TotalPCVsThe number of Path Coding Violations encoun-
tered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.7 |
dsx1TotalLESsThe number of Line Errored Seconds encountered
by a DS1 interface in the previous 24 hour in-
terval.ro Gauge .1.3.6.1.2.1.10.18.9.1.8 |
dsx1TotalBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.9 |
dsx1TotalDMsThe number of Degraded Minutes (DMs) encoun-
tered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.10 |
dsx1TotalLCVsThe number of Line Code Violations (LCVs) en-
countered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.9.1.11 |
dsx1FarEndCurrentTableThe DS1 Far End Current table. SEQUENCE OF Dsx1FarEndCurrentEntry .1.3.6.1.2.1.10.18.10 |
dsx1FarEndCurrentEntryAn entry in the DS1 Far End Current table. Dsx1FarEndCurrentEntry .1.3.6.1.2.1.10.18.10.1 |
dsx1FarEndCurrentIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value an dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.10.1.1 |
dsx1FarEndTimeElapsedThe number of seconds that have elapsed
since the beginning of the far end current
error-measurement period.ro INTEGER .1.3.6.1.2.1.10.18.10.1.2 |
dsx1FarEndValidIntervalsThe number of previous far end intervals
for which valid data was collected. The
value will be 96 unless the interface was
brought online within the last 24 hours,
in which case the value will be the number
of complete 15 minute far end intervals
since the interface has been online.ro INTEGER .1.3.6.1.2.1.10.18.10.1.3 |
dsx1FarEndCurrentESsThe number of Far Far End Errored Seconds en-
countered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.4 |
dsx1FarEndCurrentSESsThe number of Far End Severely Errored Seconds
encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.5 |
dsx1FarEndCurrentSEFSsThe number of Far End Severely Errored Framing
Seconds encountered by a DS1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.6 |
dsx1FarEndCurrentUASsThe number of Unavailable Seconds encountered
by a DS1 interface in the current 15 minute in-
terval.ro Gauge .1.3.6.1.2.1.10.18.10.1.7 |
dsx1FarEndCurrentCSSsThe number of Far End Controlled Slip Seconds
encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.8 |
dsx1FarEndCurrentLESsThe number of Far End Line Errored Seconds en-
countered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.9 |
dsx1FarEndCurrentPCVsThe number of Far End Path Coding Violations
reported via the far end block error count en-
countered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.10 |
dsx1FarEndCurrentBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.11 |
dsx1FarEndCurrentDMsThe number of Degraded Minutes (DMs) encoun-
tered by a DS1 interface in the current 15
minute interval.ro Gauge .1.3.6.1.2.1.10.18.10.1.12 |
dsx1FarEndIntervalTableThe DS1 Far End Interval table. SEQUENCE OF Dsx1FarEndIntervalEntry .1.3.6.1.2.1.10.18.11 |
dsx1FarEndIntervalEntryAn entry in the DS1 Far End Interval table. Dsx1FarEndIntervalEntry .1.3.6.1.2.1.10.18.11.1 |
dsx1FarEndIntervalIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value as a dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.11.1.1 |
dsx1FarEndIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes inter-
val (assuming that all 96 intervals are
valid).ro INTEGER .1.3.6.1.2.1.10.18.11.1.2 |
dsx1FarEndIntervalESsThe number of Far End Errored Seconds encoun-
tered by a DS1 interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.3 |
dsx1FarEndIntervalSESsThe number of Far End Severely Errored Seconds
encountered by a DS1 interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.4 |
dsx1FarEndIntervalSEFSsThe number of Far End Severely Errored Framing
Seconds encountered by a DS1 interface in one
of the previous 96, individual 15 minute, in-
tervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.5 |
dsx1FarEndIntervalUASsThe number of Unavailable Seconds encountered
by a DS1 interface in one of the previous 96,
individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.6 |
dsx1FarEndIntervalCSSsThe number of Far End Controlled Slip Seconds
encountered by a DS1 interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.7 |
dsx1FarEndIntervalLESsThe number of Far End Line Errored Seconds en-
countered by a DS1 interface in one of the pre-
vious 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.8 |
dsx1FarEndIntervalPCVsThe number of Far End Path Coding Violations
reported via the far end block error count en-
countered by a DS1 interface in one of the pre-
vious 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.9 |
dsx1FarEndIntervalBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface in one of the
previous 96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.10 |
dsx1FarEndIntervalDMsThe number of Degraded Minutes (DMs) encoun-
tered by a DS1 interface in one of the previous
96, individual 15 minute, intervals.ro Gauge .1.3.6.1.2.1.10.18.11.1.11 |
dsx1FarEndTotalTableThe DS1 Far End Total table. SEQUENCE OF Dsx1FarEndTotalEntry .1.3.6.1.2.1.10.18.12 |
dsx1FarEndTotalEntryAn entry in the DS1 Far End Total table. Dsx1FarEndTotalEntry .1.3.6.1.2.1.10.18.12.1 |
dsx1FarEndTotalIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value an dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.12.1.1 |
dsx1FarEndTotalESsThe number of Far End Errored Seconds encoun-
tered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.2 |
dsx1FarEndTotalSESsThe number of Far End Severely Errored Seconds
encountered by a DS1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.3 |
dsx1FarEndTotalSEFSsThe number of Far End Severely Errored Framing
Seconds encountered by a DS1 interface in the
previous 24 hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.4 |
dsx1FarEndTotalUASsThe number of Unavailable Seconds encountered
by a DS1 interface in the previous 24 hour in-
terval.ro Gauge .1.3.6.1.2.1.10.18.12.1.5 |
dsx1FarEndTotalCSSsThe number of Far End Controlled Slip Seconds
encountered by a DS1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.6 |
dsx1FarEndTotalLESsThe number of Far End Line Errored Seconds en-
countered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.7 |
dsx1FarEndTotalPCVsThe number of Far End Path Coding Violations
reported via the far end block error count en-
countered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.8 |
dsx1FarEndTotalBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.9 |
dsx1FarEndTotalDMsThe number of Degraded Minutes (DMs) encoun-
tered by a DS1 interface in the previous 24
hour interval.ro Gauge .1.3.6.1.2.1.10.18.12.1.10 |
dsx1FracTableThe DS1 Fractional table. SEQUENCE OF Dsx1FracEntry .1.3.6.1.2.1.10.18.13 |
dsx1FracEntryAn entry in the DS1 Fractional table. Dsx1FracEntry .1.3.6.1.2.1.10.18.13.1 |
dsx1FracIndexThe index value which uniquely identifies the
DS1 interface to which this entry is applica-
ble. The interface identified by a particular
value of this index is the same interface as
identified by the same value an dsx1LineIndex
object instance.ro INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.13.1.1 |
dsx1FracNumberThe channel number for this entry.ro INTEGER .1.3.6.1.2.1.10.18.13.1.2 |
dsx1FracIfIndexAn index value that uniquely identifies an in-
terface. The interface identified by a partic-
ular value of this index is the same interface
as identified by the same value an ifIndex ob-
ject instance. If no interface is currently us-
ing a channel, the value should be zero. If a
single interface occupies more than one time
slot, that ifIndex value will be found in mul-
tiple time slots.rw INTEGER (1..'7fffffff'h) .1.3.6.1.2.1.10.18.13.1.3 |