ADTRAN-TSUIQ-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADTRAN-TSUIQ-MIB.
216
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
216 total| Object Name |
|---|
adTSUIQ OBJECT IDENTIFIER .1.3.6.1.4.1.664.1.147 |
RFC1155-SMI Unknown .1.3.6.1.4.1.664.1.147 |
adTSUIQNetworkPhysUpThis trap indicates that the physical
layer of the network is now up. TRAP-TYPE .1.3.6.1.4.1.664.1.147.0.14701 |
adTSUIQNetworkPhysDownThis trap indicates that the physical
layer of the network is now down. TRAP-TYPE .1.3.6.1.4.1.664.1.147.0.14702 |
adTSUIQNetworkLMIUpThis trap indicates that the LMI state
of the network is now up. TRAP-TYPE .1.3.6.1.4.1.664.1.147.0.14703 |
adTSUIQNetworkLMIDownThis trap indicates that the LMI state
of the network is now down. TRAP-TYPE .1.3.6.1.4.1.664.1.147.0.14704 |
adTSUIQColdStartThis trap indicates that a cold start has occurred. TRAP-TYPE .1.3.6.1.4.1.664.1.147.0.14705 |
adTSUIQmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147 |
adTSUIQSystemConfig OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.1 |
adTSUIQPasswordSets the Telnet and Vt100 Control Password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.1.1 |
adTSUIQTODSets the Time of Day with format hh:mm.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.1.2 |
adTSUIQDateSets the Date with the format MM-DD-YY.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.1.3 |
adTSUIQIpAddressSets the unit's IP Address.rw IpAddress .1.3.6.1.4.1.664.2.147.1.4 |
adTSUIQIpAddressMaskSets the Network Subnet Mask.rw IpAddress .1.3.6.1.4.1.664.2.147.1.5 |
adTSUIQGatewayIpAddressSets the Network Gateway IP Address.rw IpAddress .1.3.6.1.4.1.664.2.147.1.6 |
adTSUIQTrapManagerIpAddressSets the Trap Manager IP Address.rw IpAddress .1.3.6.1.4.1.664.2.147.1.7 |
adTSUIQTrapManagerDLCISets the Trap Manager DLCI. (Range 16 - 1007).rw INTEGER .1.3.6.1.4.1.664.2.147.1.8 |
adTSUIQTrapManagerPortSelects the Trap Manager Port.rw Enumeration .1.3.6.1.4.1.664.2.147.1.9 |
adTSUIQControPortBaudSelects the Control Port Baud Rate.rw Enumeration .1.3.6.1.4.1.664.2.147.1.10 |
adTSUIQControPortModeSelects the Control Port Mode.rw Enumeration .1.3.6.1.4.1.664.2.147.1.11 |
adTSUIQEnableTrapsOverall trap enable/disable.rw Enumeration .1.3.6.1.4.1.664.2.147.1.12 |
adTSUIQAlarmStateThis bit map variable indicates alarm conditions which
are currently set. When an alarm condition occurs, the
corresponding event bit is set in this variable. If
armed, setting the event will generate an Alarm Trap.
The various alarm event bit positions are:
1 = Network physical link up.
2 = Network physical link down.
4 = Network signal state up.
8 = Network signal state down.ro INTEGER .1.3.6.1.4.1.664.2.147.1.13 |
adTSUIQArmAlarmThis bit map variable arms or disarms an individual or
group of events identified in adFradAlarmState as a source
for generation of an Alarm Trap.
The various arm event bit positions are :
1 = Network physical link up.
2 = Network physical link down.
4 = Network signal state up.
8 = Network signal state down.rw INTEGER .1.3.6.1.4.1.664.2.147.1.14 |
adTSUIQAbortConfigA Set will cancel current selections and reverts to the last saved configuration.rw Enumeration .1.3.6.1.4.1.664.2.147.1.15 |
adTSUIQSaveConfigA Set will reset the unit and Save the current selections.rw Enumeration .1.3.6.1.4.1.664.2.147.1.16 |
adTSUIQNetPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.2 |
adTSUIQNetPortFrameTypeFrame type for T1 interfacerw Enumeration .1.3.6.1.4.1.664.2.147.2.1 |
adTSUIQNetPortClockSourceTiming source for the transmit side of the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.2 |
adTSUIQNetPortLineCodeLine code for the the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.3 |
adTSUIQNetRxSensitivitySelects the gain of receiver for the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.4 |
adTSUIQNetPortLBOLine build out for the transmit side of the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.5 |
adTSUIQNetChannelCountSelects the number of active channels for the T1 interface.rw INTEGER .1.3.6.1.4.1.664.2.147.2.6 |
adTSUIQNetChannelStartSelects the channel that begins the active channel list for the T1 interface.rw INTEGER .1.3.6.1.4.1.664.2.147.2.7 |
adTSUIQNetChannelBandwidthSelects the amount of data in each active channel for the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.8 |
adTSUIQNetChannelAlignmentSelects the alignment of active channels for the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.9 |
adTSUIQNetTransmitPRMEnables performance report generation across the T1 FDL for the T1 interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.10 |
adTSUIQNetPortSignalingSignaling type for the frame relay management interface.rw Enumeration .1.3.6.1.4.1.664.2.147.2.11 |
adTSUIQNetPortt391Sets the polling interval in seconds for the frame relay management interface.
(Range 5 - 30).rw INTEGER .1.3.6.1.4.1.664.2.147.2.12 |
adTSUIQNetPortn391Sets the interval between full status polls for the frame relay management interface.
(Range 1 - 255).rw INTEGER .1.3.6.1.4.1.664.2.147.2.13 |
adTSUIQNetPortn392Sets the error count for the frame relay management interface. (Range 1 - 10).rw INTEGER .1.3.6.1.4.1.664.2.147.2.14 |
adTSUIQNetPortn393Sets the event window for the frame relay management interface. ( Range 1 - 10).rw INTEGER .1.3.6.1.4.1.664.2.147.2.15 |
adTSUIQNetPortMgmtDlci1ModeSets the mode for the managent DLCI 1. If set for shared, management DLCI 1 is used for customer data and
IQ management data. If set for dedicated, management DLCI 1 is used only for IQ management data and is
not passed to the attached frame relay DTE device.rw Enumeration .1.3.6.1.4.1.664.2.147.2.16 |
adTSUIQNetPortMgmtDlci2ModeSets the mode for the managent DLCI 2. If set for shared, management DLCI 2 is used for customer data and
IQ management data. If set for dedicated, management DLCI 2 is used only for IQ management data and is
not passed to the attached frame relay DTE device.rw Enumeration .1.3.6.1.4.1.664.2.147.2.17 |
adTSUIQNetMgmtDlci1Sets the address for management PVC 1. (Range 16 - 1007).rw INTEGER .1.3.6.1.4.1.664.2.147.2.18 |
adTSUIQNetMgmtDlci2Sets the address for management PVC 2. (Range 16 - 1007).rw INTEGER .1.3.6.1.4.1.664.2.147.2.19 |
adTSUIQNetPortMaxPVCsSets the maxium PVCs supported by the IQ unit. (Range 1 - 100).rw INTEGER .1.3.6.1.4.1.664.2.147.2.20 |
adTSUIQNetPortHistIntervalsSets the number of history intervals for storage.rw INTEGER .1.3.6.1.4.1.664.2.147.2.21 |
adTSUIQNetPortHistIntervalsAvailableReturns the number of history intervals allowed based on the maxium number of PVCs selected.ro INTEGER .1.3.6.1.4.1.664.2.147.2.22 |
adTSUIQDtePortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.3 |
adTSUIQDteCTSOptionSelects the Clear to Send (CTS) option.rw Enumeration .1.3.6.1.4.1.664.2.147.3.1 |
adTSUIQDteCDOptionSelects the Carrier Detect (CD) option.rw Enumeration .1.3.6.1.4.1.664.2.147.3.2 |
adTSUIQDteDSROptionSelects the Data Set Ready (DSR) option.rw Enumeration .1.3.6.1.4.1.664.2.147.3.3 |
adTSUIQDtePortMgmtDLCISelects the DTE Port Management DLCI. (Range 16 - 1007).rw INTEGER .1.3.6.1.4.1.664.2.147.3.4 |
adTSUIQDtePortt392Sets the timeout in seconds between polling intervals. (Range 5 - 30)..rw INTEGER .1.3.6.1.4.1.664.2.147.3.5 |
adTSUIQDtePortn392Sets the number of error events for the frame relay management.
(Range 1 - 10)..rw INTEGER .1.3.6.1.4.1.664.2.147.3.6 |
adTSUIQDtePortn393Sets the error window (polling events) for the frame relay management.
(Range 1 - 10).rw INTEGER .1.3.6.1.4.1.664.2.147.3.7 |
adTSUIQDteTCClockOptionSets the phase of the DTE Transmit clock.rw Enumeration .1.3.6.1.4.1.664.2.147.3.8 |
adTSUIQDteManagementPvcOptionControls the presence of the DTE management PVC in a full status response to the DTE device.rw Enumeration .1.3.6.1.4.1.664.2.147.3.9 |
adTSUIQDteSignalingResponsesOptionDetermines how the IQ device will respond to polls from the DTE device during a network failure.
If set to always on, the IQ will respond to polls during a network failure. If set to follow network, the IQ
will not respond thus emulating a failure to the DTE device. If the IQ is responsible for
dial backup, this option should be set to always on.rw Enumeration .1.3.6.1.4.1.664.2.147.3.10 |
adTSUIQDteFlowControlOptionDetermines how the IQ device will respond to congestion during DBU operation.
If set for none, the IQ will drop frames during DBU operation when severe congestion occurs.
If set for hardware, the IQ will vary the DTE TC clock in order to control the amount of data
offered to the IQ when severe congestion occurs. FECN/BECN mode will set the FECN bit in outbound frames
and set BECN bit for inbound frames leaving flow control up to the DTE devices.rw Enumeration .1.3.6.1.4.1.664.2.147.3.11 |
adTSUIQPvcConfig OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.4 |
adTSUIQPvcConfigTablen/a. SEQUENCE OF AdTSUIQPvcConfigEntry .1.3.6.1.4.1.664.2.147.4.1 |
adTSUIQPvcConfigEntryn/a AdTSUIQPvcConfigEntry .1.3.6.1.4.1.664.2.147.4.1.1 |
adTSUIQPvcConfigIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.4.1.1.1 |
adTSUIQPvcDLCIAddress for this PVC entry. (Range 16 - 1007).rw INTEGER .1.3.6.1.4.1.664.2.147.4.1.1.2 |
adTSUIQPvcCIRCommited Information Rate for this PVC in Kbps. (Range 0 - 1536).rw INTEGER .1.3.6.1.4.1.664.2.147.4.1.1.3 |
adTSUIQPvcSequenceOptionSequence number allows the IQ to detect lost frames across the frame relay
service. This option should be disabled for PVCs that do not have IQ
on both ends.rw Enumeration .1.3.6.1.4.1.664.2.147.4.1.1.4 |
adTSUIQPvcDelayPacketOptionDelay packet option for this PVC allows the IQ to sample round trip delay
across the frame relay service. This option should be disabled for PVCs that do not have IQ
on both ends.rw Enumeration .1.3.6.1.4.1.664.2.147.4.1.1.5 |
adTSUIQPvcDBUDLCIUsed when this PVC entry is used for dial backup. This value should contain the PVC address
as seen on the far end of the PVC.rw INTEGER .1.3.6.1.4.1.664.2.147.4.1.1.6 |
adTSUIQPvcStatsControlStats Control option determines how the IQ will track statistics for this PVC entry. Auto will
allow the IQ to track statistics for a PVC if enough memory is available.rw Enumeration .1.3.6.1.4.1.664.2.147.4.1.1.7 |
adTSUIQCurrentStatus OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.5 |
adTSUIQT1StateCurrent status of the T1 interfacero Enumeration .1.3.6.1.4.1.664.2.147.5.1 |
adTSUIQDteControlLeadsThis bit map integer reflects the current state of the DTE control leads as follows:
bit meaning
0 CTS
1 RTS
2 DSR
3 DTR
4 DCD
A 1 means the lead is on.ro INTEGER .1.3.6.1.4.1.664.2.147.5.2 |
adTSUIQDBUPortTypeReturns the DBU card type installed.ro Enumeration .1.3.6.1.4.1.664.2.147.5.3 |
adTSUIQLANPortStatusReturns the LAN card type installed.ro Enumeration .1.3.6.1.4.1.664.2.147.5.4 |
adTSUIQLEDstatusThis bit map integer reflects TSUIQ front panel LED state as follows:
bit meaning
0 TEST
1 ALARM
2 ERROR
3 RD
4 TD
5 CTS
6 RTSro INTEGER .1.3.6.1.4.1.664.2.147.5.5 |
adTSUIQDTESignalingStateCurrent state of the PVC signaling between the TSUIQ and the attached frame relay dte.ro Enumeration .1.3.6.1.4.1.664.2.147.5.6 |
adTSUIQNETSignalingStateCurrent state of the PVC signaling between the TSUIQ and the frame relay service.ro Enumeration .1.3.6.1.4.1.664.2.147.5.7 |
adTSUIQNETPVCCountCurrent count of network pvcs.ro INTEGER .1.3.6.1.4.1.664.2.147.5.8 |
adTSUIQNETPVCConfigTableSizeCurrent count of rows in the PVC config table.ro INTEGER .1.3.6.1.4.1.664.2.147.5.9 |
adTSUIQDBUStateCurrent state of the DBU interface.ro Enumeration .1.3.6.1.4.1.664.2.147.5.10 |
adTSUIQIntT1Status OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.6 |
adTSUIQIntT1StatusTablen/a. SEQUENCE OF AdTSUIQIntT1StatusEntry .1.3.6.1.4.1.664.2.147.6.1 |
adTSUIQIntT1StatusEntryn/a AdTSUIQIntT1StatusEntry .1.3.6.1.4.1.664.2.147.6.1.1 |
adTSUIQIntT1SlotIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.6.1.1.1 |
adTSUIQIntT1UnavailableTimeAmount of time in seconds the T1 port is unavailable due to test
or in an inactive state.ro Counter .1.3.6.1.4.1.664.2.147.6.1.1.2 |
adTSUIQIntT1StateChangeNumber of changes in the T1 port state. This includes all normal, inactive, and test
state transitions.ro Counter .1.3.6.1.4.1.664.2.147.6.1.1.3 |
adTSUIQIntT1SignalLossEventActive state represents one or more signal loss events.ro Enumeration .1.3.6.1.4.1.664.2.147.6.1.1.4 |
adTSUIQIntT1LoopBackEventActive state represents one or more loopback events.ro Enumeration .1.3.6.1.4.1.664.2.147.6.1.1.5 |
adTSUIQIntT1AISEventActive state represents one or more AIS events. AIS is triggered by unframed all ones condition from the
T1 service provider.ro Enumeration .1.3.6.1.4.1.664.2.147.6.1.1.6 |
adTSUIQIntT1RedAlarmEventActive state represents one or more red alarm events. Red alarm is triggered by loss of frame alignment on the receive
T1 signal.ro Enumeration .1.3.6.1.4.1.664.2.147.6.1.1.7 |
adTSUIQIntT1YellowAlarmEventActive state represents one or more yellow alarm events. Yellow alarm is an indication the service provider has
lost frame alignmnet.ro Enumeration .1.3.6.1.4.1.664.2.147.6.1.1.8 |
adTSUIQIntT1PLLAlarmEventActive state represents one or more PLL alarm events. PLL alarm is an indication that the transmit and
receive side of the T1 interface are not looped timed. This will occur when both ends of the T1 are set
to provide timing.ro Enumeration .1.3.6.1.4.1.664.2.147.6.1.1.9 |
adTSUIQIntT1PathCodeViolationCount of path code violations received. Path code violations are a errors in the frame bit postions for D4
and ESF CRC errors when set for ESF.ro Counter .1.3.6.1.4.1.664.2.147.6.1.1.10 |
adTSUIQIntT1LineCodeViolationCount of line code violations received. Line code violations are a combination of BPVs that are not
part of B8ZS code and excess zeros. Excess zeros are 8 or more consecutive zeros when set for B8ZS and 15
or more consecutive zeros when set for AMI.ro Counter .1.3.6.1.4.1.664.2.147.6.1.1.11 |
adTSUIQDayT1Status OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.7 |
adTSUIQDayT1StatusTablen/a. SEQUENCE OF AdTSUIQDayT1StatusEntry .1.3.6.1.4.1.664.2.147.7.1 |
adTSUIQDayT1StatusEntryn/a AdTSUIQDayT1StatusEntry .1.3.6.1.4.1.664.2.147.7.1.1 |
adTSUIQDayT1SlotIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.7.1.1.1 |
adTSUIQDayT1UnavailableTimeAmount of time in seconds the T1 port is unavailable due to test
or in an inactive state.ro Counter .1.3.6.1.4.1.664.2.147.7.1.1.2 |
adTSUIQDayT1StateChangeNumber of changes in the T1 port state. This includes all normal, inactive, and test
state transitions.ro Counter .1.3.6.1.4.1.664.2.147.7.1.1.3 |
adTSUIQDayT1SignalLossEventActive state represents one or more signal loss events.ro Enumeration .1.3.6.1.4.1.664.2.147.7.1.1.4 |
adTSUIQDayT1LoopBackEventActive state represents one or more loopback events.ro Enumeration .1.3.6.1.4.1.664.2.147.7.1.1.5 |
adTSUIQDayT1AISEventActive state represents one or more AIS events. AIS is triggered by unframed all ones condition from the
T1 service provider.ro Enumeration .1.3.6.1.4.1.664.2.147.7.1.1.6 |
adTSUIQDayT1RedAlarmEventActive state represents one or more red alarm events. Red alarm is triggered by loss of frame alignment on the receive
T1 signal.ro Enumeration .1.3.6.1.4.1.664.2.147.7.1.1.7 |
adTSUIQDayT1YellowAlarmEventActive state represents one or more yellow alarm events. Yellow alarm is an indication the service provider has
lost frame alignmnet.ro Enumeration .1.3.6.1.4.1.664.2.147.7.1.1.8 |
adTSUIQDayT1PLLAlarmEventActive state represents one or more PLL alarm events. PLL alarm is an indication that the transmit and
receive side of the T1 interface are not looped timed. This will occur when both ends of the T1 are set
to provide timing.ro Enumeration .1.3.6.1.4.1.664.2.147.7.1.1.9 |
adTSUIQDayT1PathCodeViolationCount of path code violations received. Path code violations are a errors in the frame bit postions for D4
and ESF CRC errors when set for ESF.ro Counter .1.3.6.1.4.1.664.2.147.7.1.1.10 |
adTSUIQDayT1LineCodeViolationCount of line code violations received. Line code violations are a combination of BPVs that are not
part of B8ZS code and excess zeros. Excess zeros are 8 or more consecutive zeros when set for B8ZS and 15
or more consecutive zeros when set for AMI.ro Counter .1.3.6.1.4.1.664.2.147.7.1.1.11 |
adTSUIQDiagnostic OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.8 |
adTSUIQDiagnosticTablen/a. SEQUENCE OF AdTSUIQDiagnosticEntry .1.3.6.1.4.1.664.2.147.8.1 |
adTSUIQDiagnosticEntryn/a AdTSUIQDiagnosticEntry .1.3.6.1.4.1.664.2.147.8.1.1 |
adTSUIQDiagnosticIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.8.1.1.1 |
adTSUIQDiagnosticDlciSets the DLCI for PVC Loopback. (Range 16 - 1007).ro INTEGER .1.3.6.1.4.1.664.2.147.8.1.1.2 |
adTSUIQDiagnosticControlStarts or Stops the PVC Loopback Test.rw Enumeration .1.3.6.1.4.1.664.2.147.8.1.1.3 |
adTSUIQDiagnosticDurationTest duration in seconds.rw INTEGER .1.3.6.1.4.1.664.2.147.8.1.1.4 |
adTSUIQDiagnosticStatusPVC Loopback Test Status. (Active/Inactive).rw Enumeration .1.3.6.1.4.1.664.2.147.8.1.1.5 |
adTSUIQDiagnosticSecondsRemainingPVC Loopback Test time remaining in seconds.ro INTEGER .1.3.6.1.4.1.664.2.147.8.1.1.6 |
adTSUIQDiagnosticFramesTxDiagnostic Frames transmitted.ro Counter .1.3.6.1.4.1.664.2.147.8.1.1.7 |
adTSUIQDiagnosticFramesRxDiagnostic Frames received.ro Counter .1.3.6.1.4.1.664.2.147.8.1.1.8 |
adTSUIQDiagnosticLostFramesDiagnostic Frames Lost.ro Counter .1.3.6.1.4.1.664.2.147.8.1.1.9 |
adTSUIQDiagnosticMaxDelayDiagnostic Maximum Delay measurement.ro Gauge .1.3.6.1.4.1.664.2.147.8.1.1.10 |
adTSUIQDiagnosticMinDelayDiagnostic Minimum Delay measurement.ro Gauge .1.3.6.1.4.1.664.2.147.8.1.1.11 |
adTSUIQDiagnosticAvgDelayDiagnostic Average Delay measurement.ro Gauge .1.3.6.1.4.1.664.2.147.8.1.1.12 |
adTSUIQ1406Time OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.9 |
adTSUIQ1406TimeTablen/a. SEQUENCE OF AdTSUIQ1406TimeEntry .1.3.6.1.4.1.664.2.147.9.1 |
adTSUIQ1406TimeEntryn/a AdTSUIQ1406TimeEntry .1.3.6.1.4.1.664.2.147.9.1.1 |
adTSUIQ1406TimeSlotIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.9.1.1.1 |
adTSUIQ1406TimeStampTime interval started. Format H:M if not midnight else M-Dro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.9.1.1.2 |
adTSUIQDBUConfig OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.10 |
adTSUIQDBUOptionThis option specifies whether the unit automatically
enters dial backup mode or waits for manual setup.rw Enumeration .1.3.6.1.4.1.664.2.147.10.1 |
adTSUIQDBUStartLockoutThis option selects the hour to begin disabling
dial backup operation when daily or weekend
lockout mode is active.rw INTEGER .1.3.6.1.4.1.664.2.147.10.2 |
adTSUIQDBUEndLockoutThis option selects the hour to end dial backup lockout
when daily or weekend lockout mode is active.rw INTEGER .1.3.6.1.4.1.664.2.147.10.3 |
adTSUIQDBUModeThis option specifies the dial backup operating mode for the
unit as orginate or answer. One end must be set to originate
and the other end to answer.rw Enumeration .1.3.6.1.4.1.664.2.147.10.4 |
adTSUIQDBUWithNetworkFailureThis option enables the unit to enter backup mode when
T1 network failure occurs.rw Enumeration .1.3.6.1.4.1.664.2.147.10.5 |
adTSUIQDBUNoLMIThis option enables the unit to enter backup mode when
network PVC signaling state goes down.rw Enumeration .1.3.6.1.4.1.664.2.147.10.6 |
adTSUIQAutoRestoreTimerThis option selects the amount of time that the TSUIQ
circuit must be active before the unit switches from
backup to normal mode of operation. The timer value is
in minutes from 0 to 60. A zero value disables automatic
restore, TSUIQ operation must be restored manually.rw INTEGER .1.3.6.1.4.1.664.2.147.10.7 |
adTSUIQRedialCountThis option allows the selection of the number of times the
unit will redial the Far End unit when attempting to go to
backup and a busy or reorder condition occurs. Redial count
can be set for a maximum of 60.rw INTEGER .1.3.6.1.4.1.664.2.147.10.8 |
adTSUIQDBUFailTimeoutThis option allows the selection of the amount of time that
the dedicated circuit failure condition is active before
attempting to enter dial backup mode. The Fail Timeout
value is in increments of 10 seconds up to a maximum of 600 seconds.rw INTEGER .1.3.6.1.4.1.664.2.147.10.9 |
adTSUIQDBURedialTimerThis option works in conjunction with the Redial Counter option.
The Redial Timer specifies the amount of time between redial
attempts. The Redial Timer value is seconds, up to a maximum
of 60 seconds.rw INTEGER .1.3.6.1.4.1.664.2.147.10.10 |
adTSUIQDBUPassCheckThis option allows the unit to send and verify a dial backup
passcode for an additional level of security. When enabled, the
originate unit sends the passcode and the answer unit checks the
passcode before the backup connection is considered valid.rw Enumeration .1.3.6.1.4.1.664.2.147.10.11 |
adTSUIQDBUPassCodeThis option sets the dial backup passcode used to provide an
additional level of security. A passcode of one to ten digit
characters can be set. If enabled, the originate unit sends
the passcode and the answer unit checks the passcode to verify
the connection.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.12 |
adTSUIQWeekendLockoutThis option enables or disables Weekend Lockout for Dial
Backup operation. If enabled, no backup will occur from
midnight Friday to midnight Sunday.rw Enumeration .1.3.6.1.4.1.664.2.147.10.13 |
adTSUIQDailyLockoutThis option enables or disables Daily Lockout for Dial
Backup operation. If enabled, no backup will occur between
Lockout Start hour and Lockout End hour.rw Enumeration .1.3.6.1.4.1.664.2.147.10.14 |
adTSUIQAnswerAlwaysThis option enables or disables Answer Always for Dial
Backup operation. If enabled, the answer unit answers
any incoming call regardless of failed conditions.rw Enumeration .1.3.6.1.4.1.664.2.147.10.15 |
adTSUIQBeeperOptionThis option enables or disables the audible alarm
when the IQ unit goes into dial backup mode.rw Enumeration .1.3.6.1.4.1.664.2.147.10.16 |
adTSUIQDBUPhoneNumber1This option is used to set a phone number to place a DBU call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.17 |
adTSUIQDBUPhoneNumber2This option is used to set a phone number to place a DBU call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.18 |
adTSUIQDBUPhoneNumber3This option is used to set a phone number to place a DBU call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.19 |
adTSUIQDBUPhoneNumber4This option is used to set a phone number to place a DBU call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.20 |
adTSUIQDBUPhoneNumber5This option is used to set a phone number to place a DBU call.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.21 |
adTSUIQDBUISDNSwitchThis option is used to select the ISDN switch type.rw Enumeration .1.3.6.1.4.1.664.2.147.10.22 |
adTSUIQDBUISDNBChannelRateThis option is used to select the ISDN channel rate.rw Enumeration .1.3.6.1.4.1.664.2.147.10.23 |
adTSUIQDBUISDNBChannelCountThis option is used to select the number ISDN channels to use.rw INTEGER .1.3.6.1.4.1.664.2.147.10.24 |
adTSUIQDBUISDNSPID1This option is used to set the SPID for the ISDN interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.25 |
adTSUIQDBUISDNSPID2This option is used to set the SPID for the ISDN interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.26 |
adTSUIQDBUISDNLDN1This option is used to set LDN for the ISDN interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.27 |
adTSUIQDBUISDNLDN2This option is used to set LDN for the ISDN interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.147.10.28 |
adTSUIQV34LineTypeThis option selects the type of analog phone line.rw Enumeration .1.3.6.1.4.1.664.2.147.10.29 |
adTSUIQDCEInterfaceTypeThis option enables or disables Answer Always for Dial
Backup operation. If enabled, the answer unit answers
any incoming call regardless of failed conditions.rw Enumeration .1.3.6.1.4.1.664.2.147.10.30 |
adTSUIQDCEBitRateThis option is uses for utilization measurement of the DBU port when
an external DCE device is used. Set this parameter in KBPS close to the
connection rate.rw INTEGER .1.3.6.1.4.1.664.2.147.10.31 |
adTSUIQIntDBUStatus OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.11 |
adTSUIQIntDBUStatusTablen/a. SEQUENCE OF AdTSUIQIntDBUStatusEntry .1.3.6.1.4.1.664.2.147.11.1 |
adTSUIQIntDBUStatusEntryn/a AdTSUIQIntDBUStatusEntry .1.3.6.1.4.1.664.2.147.11.1.1 |
adTSUIQIntDBUSlotIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.11.1.1.1 |
adTSUIQIntDBUFramesRxThe number of Frames the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.2 |
adTSUIQIntDBUFramesTxThe number of Frames the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.3 |
adTSUIQIntDBUBytesRxThe number of Bytes the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.4 |
adTSUIQIntDBUBytesTxThe number of Bytes the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.5 |
adTSUIQIntDBUAvgThruputTxThe Average Throughput the Port transmitted for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.11.1.1.6 |
adTSUIQIntDBUAvgThruputRxThe Average Throughput the Port received for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.11.1.1.7 |
adTSUIQIntDBUMaxThruputTxThe Maximum Throughput the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.8 |
adTSUIQIntDBUMaxThruputRxThe Maximum Throughput the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.9 |
adTSUIQIntDBUAvgUtilizationTxThe Average Utilization the Port transmitted for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.11.1.1.10 |
adTSUIQIntDBUAvgUtilizationRxThe Average Utilization the Port received for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.11.1.1.11 |
adTSUIQIntDBUMaxUtilizationTxThe Maximum Utilization the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.12 |
adTSUIQIntDBUMaxUtilizationRxThe Maximum Utilization the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.13 |
adTSUIQIntTimeInDBUTime in seconds the DBU port was active.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.14 |
adTSUIQIntDBUCrcErrorsNumber of frames received with CRC errors.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.15 |
adTSUIQIntDBUAbortFramesNumber of frames received without proper flag termination.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.16 |
adTSUIQIntDBUOctectViolationsNumber of frames received with a bit count not divisible by eigth.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.17 |
adTSUIQIntDBUDiscardFramesNumber of frames discarded by the IQ unitro Counter .1.3.6.1.4.1.664.2.147.11.1.1.18 |
adTSUIQIntDBULengthErrorsNumber of frames received that is less than 5 bytes or greater than 4500 bytes.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.19 |
adTSUIQIntDBUEncapsulationErrorsNumber of frames destined for the IQ IP stack with that does not meet
the FRF.3 IA.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.20 |
adTSUIQIntDBUUnroutableNumber of frames received on a management DLCI destined for the IQ unit
and have the wrong IP address.ro Counter .1.3.6.1.4.1.664.2.147.11.1.1.21 |
adTSUIQDayDBUStatus OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.12 |
adTSUIQDayDBUStatusTablen/a. SEQUENCE OF AdTSUIQDayDBUStatusEntry .1.3.6.1.4.1.664.2.147.12.1 |
adTSUIQDayDBUStatusEntryn/a AdTSUIQDayDBUStatusEntry .1.3.6.1.4.1.664.2.147.12.1.1 |
adTSUIQDayDBUSlotIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.12.1.1.1 |
adTSUIQDayDBUFramesRxThe number of Frames the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.2 |
adTSUIQDayDBUFramesTxThe number of Frames the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.3 |
adTSUIQDayDBUBytesRxThe number of Bytes the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.4 |
adTSUIQDayDBUBytesTxThe number of Bytes the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.5 |
adTSUIQDayDBUAvgThruputTxThe Average Throughput the Port transmitted for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.12.1.1.6 |
adTSUIQDayDBUAvgThruputRxThe Average Throughput the Port received for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.12.1.1.7 |
adTSUIQDayDBUMaxThruputTxThe Maximum Throughput the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.8 |
adTSUIQDayDBUMaxThruputRxThe Maximum Throughput the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.9 |
adTSUIQDayDBUAvgUtilizationTxThe Average Utilization the Port transmitted for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.12.1.1.10 |
adTSUIQDayDBUAvgUtilizationRxThe Average Utilization the Port received for the interval.ro Gauge .1.3.6.1.4.1.664.2.147.12.1.1.11 |
adTSUIQDayDBUMaxUtilizationTxThe Maximum Utilization the Port transmitted for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.12 |
adTSUIQDayDBUMaxUtilizationRxThe Maximum Utilization the Port received for the interval.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.13 |
adTSUIQDayTimeInDBUTime in seconds the DBU port was active.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.14 |
adTSUIQDayDBUCrcErrorsNumber of frames received with CRC errors.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.15 |
adTSUIQDayDBUAbortFramesNumber of frames received without proper flag termination.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.16 |
adTSUIQDayDBUOctectViolationsNumber of frames received with a bit count not divisible by eigth.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.17 |
adTSUIQDayDBUDiscardFramesNumber of frames discarded by the IQ unitro Counter .1.3.6.1.4.1.664.2.147.12.1.1.18 |
adTSUIQDayDBULengthErrorsNumber of frames received that is less than 5 bytes or greater than 4500 bytes.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.19 |
adTSUIQDayDBUEncapsulationErrorsNumber of frames destined for the IQ IP stack with that does not meet
the FRF.3 IA.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.20 |
adTSUIQDayDBUUnroutableNumber of frames received on a management DLCI destined for the IQ unit
and have the wrong IP address.ro Counter .1.3.6.1.4.1.664.2.147.12.1.1.21 |
adTSUIQTrapManager OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.147.13 |
adTSUIQTrapManagerTableThe trap manger route table. SEQUENCE OF AdTSUIQTrapManagerEntry .1.3.6.1.4.1.664.2.147.13.1 |
adTSUIQTrapManagerEntryn/a AdTSUIQTrapManagerEntry .1.3.6.1.4.1.664.2.147.13.1.1 |
adTSUIQTrapManagerRouteIndexn/a.ro INTEGER .1.3.6.1.4.1.664.2.147.13.1.1.1 |
adTSUIQTrapManagerRouteIPAddressSets the Trap Manager IP Address.rw IpAddress .1.3.6.1.4.1.664.2.147.13.1.1.2 |
adTSUIQTrapManagerRouteDLCISets the Trap Manager DLCI. (Range 16 - 1007).rw INTEGER .1.3.6.1.4.1.664.2.147.13.1.1.3 |
adTSUIQTrapManagerRoutePortSelects the Trap Manager Port.rw Enumeration .1.3.6.1.4.1.664.2.147.13.1.1.4 |