ADTRAN-ATLAS-UNIT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADTRAN-ATLAS-UNIT-MIB.
36
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
adtran OBJECT IDENTIFIER .1.3.6.1.4.1.664 |
RFC1155-SMI Unknown .1.3.6.1.4.1.664 |
adMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.664.2 |
adATLASmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154 |
adATLASFrSwToBkupThis trap indicates that the indicated Virtual
Circuit has switched to a backup state. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400500 |
adATLASFrSwToPrimaryThis trap indicates that the indicated Virtual
Circuit has been restored to the primary state. TRAP-TYPE .1.3.6.1.4.1.664.2.154.0.15400501 |
adGenATLASmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1 |
adATLASUnitmg OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.5 |
adATLASUnitInfo OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.5.1 |
adATLASUnitIfNumberThe number of physical interfaces (regardless of
their current state) present on this system. The same
as ifNumber defined in the MIB-2 interfaces group.ro INTEGER .1.3.6.1.4.1.664.2.154.1.5.1.1 |
adATLASUnitPortInfoTableA table of hardware oriented port information on each card.
This only includes actual card ports, and not layered
logical interfaces. SEQUENCE OF AdATLASUnitPortInfoEntry .1.3.6.1.4.1.664.2.154.1.5.1.2 |
adATLASUnitPortInfoEntryA row table entry exists for each card/port pair. AdATLASUnitPortInfoEntry .1.3.6.1.4.1.664.2.154.1.5.1.2.1 |
adATLASUnitPortStatusThe current status of the port.ro Enumeration .1.3.6.1.4.1.664.2.154.1.5.1.2.1.1 |
adATLASUnitPortIfIndexThe interface number identified as ifIndex from the MIB-II
interfaces table as defined by the slot and port numbers in
this device.ro INTEGER .1.3.6.1.4.1.664.2.154.1.5.1.2.1.2 |
adATLASUnitPortDescriptionA character string to identify the name of a port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.154.1.5.1.2.1.4 |
adATLASUnitPortSlotMapTableTable to map ifIndex to slot and port. SEQUENCE OF AdATLASUnitPortSlotMapEntry .1.3.6.1.4.1.664.2.154.1.5.1.3 |
adATLASUnitPortSlotMapEntryAn entry exists for each interface which is mapped to a
physical slot/port pair. AdATLASUnitPortSlotMapEntry .1.3.6.1.4.1.664.2.154.1.5.1.3.1 |
adATLASUnitSlotAddressThe slot in which this port is contained. Slot 0 is reported
for the system controller and all logical interfaces.ro INTEGER .1.3.6.1.4.1.664.2.154.1.5.1.3.1.1 |
adATLASUnitPortAddressThe port number within the slot. Port 0 is reported for all
logical interfaces.ro INTEGER .1.3.6.1.4.1.664.2.154.1.5.1.3.1.2 |
adATLASUnitUtil OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.5.3 |
adATLASUpdateFw OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.5.3.1 |
adATLASUpdateFwModuleNumThe slot containing the module to be updated with
the firmware. If -1 is returned, no slot has been
selected.rw INTEGER .1.3.6.1.4.1.664.2.154.1.5.3.1.1 |
adATLASUpdateFwTFTPSrvAddrThe IP address of the TFTP server.rw IpAddress .1.3.6.1.4.1.664.2.154.1.5.3.1.2 |
adATLASUpdateFwTFTPSrvFileNameThe name of the file to transfer from the TFTP
server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.154.1.5.3.1.3 |
adATLASUpdateFwCurrStatusStatus of the current firmware update.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.154.1.5.3.1.4 |
adATLASUpdateFwPrevStatusStatus of the previous firmware update.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.154.1.5.3.1.5 |
adATLASUpdateFwControlStart the firmware update by setting value to 1
and stop the firmware update in progress by setting
value to 2. The value will be 2 if a firmware
update is in progress, and 1 otherwise.rw Enumeration .1.3.6.1.4.1.664.2.154.1.5.3.1.6 |
adATLASConfigXfer OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.5.3.2 |
adATLASConfigXferTFTPSrvAddrThe IP address of the TFTP server.rw IpAddress .1.3.6.1.4.1.664.2.154.1.5.3.2.1 |
adATLASConfigXferTFTPSrvFileNameThe name of the file to transfer to/from the TFTP
server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.664.2.154.1.5.3.2.2 |
adATLASConfigXferCurrStatusStatus of the current configuration transfer.ro AdTftpConfigXferStatus .1.3.6.1.4.1.664.2.154.1.5.3.2.3 |
adATLASConfigXferPrevStatusStatus of the previous configuration transfer.ro AdTftpConfigXferStatus .1.3.6.1.4.1.664.2.154.1.5.3.2.4 |
adATLASConfigXferDwnldControlSet value to 1 to transfer the configuration file from the
TFTP server and switch to the configuration.rw Enumeration .1.3.6.1.4.1.664.2.154.1.5.3.2.5 |
adATLASConfigXferUpldControlSet value to 1 to transfer the configuration file to the
TFTP server.rw Enumeration .1.3.6.1.4.1.664.2.154.1.5.3.2.6 |
adATLASUnitStatus OBJECT IDENTIFIER .1.3.6.1.4.1.664.2.154.1.5.4 |
adATLASUnitFPStatusA bit-encoded variable that gives the overall front panel
status of the Atlas product. It is encoded as follows:
OFF 0x00
OK 0x01
ONLINE 0x02
TESTING 0x04
FLASH DOWNLOAD 0x08
ERROR 0x10
ALARM 0x20
STANDBY 0x40
WARN 0x80
Note: Multiple bits may be set concurrently, based on the
current state of the modules contained within the Atlas
product.ro INTEGER .1.3.6.1.4.1.664.2.154.1.5.4.1 |