MIB Catalog

This group allows Configuration/Viewing of Bridging and Clustering parameters for BSU. Clusters can be added and deleted using Configuration Manager and viewed using SNMP. When BSU is running in point

This module is used to configure the clock time on the BSU. BSUs need to obtain and set their current clock time at boot up. Sus will communicate with the BSU during their own boot up and set their ow

This group gives the BSU Multiple Subnets information. The aniBsuSubnetConfTable is used to view and configure subnets per wireless port. There can be upto 1024 <Ip Address/Subnet Mask> pairs. For a g

This group contains other configurable parameters for the BSU.

This group contains Statistical information for the BSU. aniBsuRfStatsTable shows the RF Port level statistics. aniBsuStatsBWGroup shows the bandwidth allocation statistics. aniBsuRfSigQStatsTable sho

This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU.

This group allows the users of the BSU to access some basic information about the SU through Proxy.

This group allows viewing of SU Inventory information maintained by the BSU. It provides information about all the SUs connected to the particular BSU.

This group contains Statistical information for each SU connected to this BSU. It displays statistics per SU per Service Flow ID when viewed from the BSU.

This group allows the users of the BSU to access status information about the SU. It consists of 2 tables - The Upstream Link Status Table and Downstream Link Status Table.

This group shows the VLAN information for the BSU.

This group contains BSU Wireless Interface information. It shows parameters for each configured Wireless Port on the BSU. It displays the following tables: aniBsuWirelessPortTable - with basic wireles