BSU-BRGCLUSTER-MIB
Imported Objects
Objects
2 total| Object Name |
|---|
aniBsuBridgeThis group allows Configuration/Viewing of Bridging and Clustering parameters for BSU. Clusters can be added and deleted using Configuration Manager and viewed using SNMP. When BSU is running in point to point mode, this group is not applicable. Also for PacketWave 750 this group is not applicable. MODULE-IDENTITY .1.3.6.1.4.1.4325.3.5 |
aniBsuSuBridgeEnableThis parameter is used to enable/disable SU to SU bridging on BSU wireless ports. When BSU is running in point to point mode, this object is not-applicable. Also for PacketWave 750, this group is not-applicable.ro Enumeration .1.3.6.1.4.1.4325.3.5.1 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.