DEVTRAPS-MIB
AI MIB Summary
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
The trap group.
Main OID:
aniDevTrap.1.3.6.1.4.1.4325.2.10
74
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
aniDevTrapThe trap group. MODULE-IDENTITY .1.3.6.1.4.1.4325.2.10 |
aniDevTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4325.2.10.0 |
aniDevTrapSuSyncAcquiredThis trap is generated by LKAD when SYNC is acquired. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.1 |
aniDevTrapBsuSuUpThis trap is sent out by BSU to report that SU is operational. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.2 |
aniDevTrapBsuSuDownThis trap is sent out by BSU to report that SU is down. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.3 |
aniDevTrapSuBsuUpThis trap is sent out by SU to report that BSU is operational. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.4 |
aniDevTrapSuBsuDownThis trap is sent out by SU to report that BSU is down. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.5 |
aniDevTrapDhcpFailureThis trap is generated when DHCP fails. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.6 |
aniDevTrapConfigDownloadFailureThis trap is generated when Config file download fails. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.7 |
aniDevTrapRamTooLowThis trap is sent out to indicate that the RAM is too low. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.8 |
aniDevTrapRamNormalThis trap is sent out to indicate that the RAM available is normal. This trap is sent out to indicate that the aniDevTrapRamTooLow alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.9 |
aniDevTrapModemPllNotLockedThe Modem PLL (Phase Locked Loop) not locked trap. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.10 |
aniDevTrapModemPllNotLockedClearThe Modem PLL (Phase Locked Loop) not locked trap cleared. This trap is sent out to indicate that the aniDevTrapModemPllNotLocked alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.11 |
aniDevTrapRadioVoltRegThis trap indicates a Radio Voltage Failure. It is sent out by both BSU and SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.12 |
aniDevTrapRadioVoltRegClearThis trap is sent out when aniDevTrapRadioVoltReg (Radio Voltage Failure) alarm is cleared. It is sent out by both BSU and SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.13 |
aniDevTrapRadioSynthNotLockedThis trap is generated when the Radio Synthesizer is not locked. It is sent out by BSU and SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.14 |
aniDevTrapRadioSynthNotLockedClearThis trap is sent out by BSU and SU to indicate that aniDevTrapRadioSynthNotLocked is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.15 |
aniDevTrapBsuFanStatusThis trap is sent out when a fan on BSU is not operational. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.16 |
aniDevTrapBsuFanStatusClearThis trap is sent to indicate that aniDevTrapBsuFanStatus is cleared, that is, the fan on BSU is operational again. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.17 |
aniDevTrapBsuDc12vStatusThis trap is generated when a 12V DC power failure occurs on the BSU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.18 |
aniDevTrapBsuDc12vStatusClearThis trap indicates that aniDevTrapBsuDc12vStatus alarm on the BSU has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.19 |
aniDevTrapMssPllNotLockedThe MSS PLL (Phase Locked Loop) not locked trap which is sent out by BSU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.20 |
aniDevTrapMssPllNotLockedClearThis trap indicates that aniDevTrapMssPllNotLocked alarm on the BSU has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.21 |
aniDevTrapBsuTempTooLowThis indicates that the temperature on the BSU is below the operating limits. A temperature sensor on the BSU checks the operating temperature of the system board. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.22 |
aniDevTrapBsuTempTooHighThis indicates that the temperature on the BSU is above the operating limits. A temperature sensor on the BSU checks the operating temperature of the system board. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.23 |
aniDevTrapBsuTempNormalThis indicates that the temperature on the BSU is within the operating limits. It shows that either the aniDevTrapBsuTempTooLow or aniDevTrapBsuTempTooHigh alarm on the BSU has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.24 |
aniDevTrapFlashSpaceTooLowThis trap is sent out when the disk space on file system is too low. It can be sent out by either BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.25 |
aniDevTrapFlashSpaceNormalThis trap is sent out when the disk space on file system is again normal. It can be sent out by either BSU or SU to clear the aniDevTrapFlashSpaceTooLow alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.26 |
aniDevTrapNvramCorruptedThis trap is sent out when the NVRAM is corrupted. 64 kB of NVRAM is allocated from the first block of flash on both BSU and SU. A checksum is maintained whenever some value if stored in it. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.27 |
aniDevTrapNvramCorruptionClearThis trap indicates that aniDevTrapNvramCorrupted alarm has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.28 |
aniDevTrapFileSysCorruptedThis trap indicates that the file system has been corrupted. It can be sent out by either BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.29 |
aniDevTrapFileSysCorruptionClearThis trap indicates that aniDevTrapFileSysCorrupted alarm has been cleared. It can be sent out by either BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.30 |
aniDevTrapSmtpConnectFailureThis trap is sent out when the connection to the SMTP server fails. It can be sent out by either BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.31 |
aniDevTrapSmtpDisabledThis trap is sent out when SMTP is disabled on the system (either BSU or SU). NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.32 |
aniDevTrapSwWatchdogResetThis trap is sent out when SU is reset by the Software Watchdog. The Software Watchdog feature detects low memory and task suspended cases, sends out the trap and reboots the device. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.33 |
aniDevTrapNatFailureThis trap is sent out when NAT failure occurs. It is sent out by SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.34 |
aniDevTrapCurrentImageCorruptedThis trap is sent out to indicate that the current image is corrupted. It can be sent out by both BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.35 |
aniDevTrapBsuSuFailedRegThis trap is sent out when the BSU-SU registration fails. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.36 |
aniDevTrapDefaultConfigFileNotFoundThis trap is sent out when the default configuration file is not found. It can be sent out by both BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.37 |
aniDevTrapCurrentBsuStateThis trap shows the current BSU State. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.38 |
aniDevTrapCurrentSuStateThis trap shows the current SU State. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.39 |
aniDevTrapMemBufferTooLowThis trap is sent out when the memory buffer is too low. It can be sent out by either BSU or SU. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.40 |
aniDevTrapMemBufferNormalThis trap is sent out when the memory buffer is again normal. It can be sent out by either BSU or SU to clear the aniDevMemBufferTooLow alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.41 |
aniDevTrapConfigFileVersionCheckFailureThis trap is sent out when there is a problem in the version of the config file. It is sent out when either the version information is missing or if there is a mismatch in the version. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.42 |
aniDevTrapDefaultFileVersionCheckFailureThis trap is sent out when there is a problem in the version of the default file. It is sent out when either the version information is missing or if there is a mismatch in the version. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.43 |
aniDevTrapConfigFileUploadFailureThis trap is sent out when the upload of the config file fails. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.44 |
aniDevTrapConfigFileUploadChecksumFailureThis trap is sent out when there is a checksum error on the config file after the upload. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.45 |
aniDevTrapRunningBaselineImageThis trap is sent out when a baseline image is running. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.46 |
aniDevTrapPowerSupplyFailureThis trap is sent out by the BSU when there is a power supply failure. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.48 |
aniDevTrapPowerSupplyNormalThis trap is sent out by the BSU when the power supply is normal again. It is sent out to indicate that the aniDevTrapPowerSupplyFailure alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.49 |
aniDevTrapRealtimeClockFailureThis trap is sent out by the BSU when there is a real time clock failure. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.50 |
aniDevTrapRealtimeClockNormalThis trap is sent out by the BSU when the real time clock is normal again. It is sent out to indicate that the aniDevTrapRealtimeClockFailure alarm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.51 |
aniDevTrapModelNumFailureThis trap is sent out when there is an error related to the model number. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.53 |
aniDevTrapConfigParseFailureThis trap is sent out when there is an error in the parsing of the configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.55 |
aniDevUpdateInventoryThis trap is sent out to notify configuration change in SU customer name. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.56 |
aniDevTrapPppFailureThis trap is sent out whenever PPP fails to establish a session. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.57 |
aniDevTrapPppStatusThis trap is sent whenever a PPP link goes up or down. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.58 |
aniDevTrapFrequencyChangeThis trap is sent out whenever the channel frequency is changed on the BSU and SU while they are in the operational state. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.59 |
aniDevTrapPPPoeSessionUpThis trap is sent out whenever the when a PPPoE Session comes up. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.62 |
aniDevTrapPPPoeOfferErrorThis trap is sent out whenever the when no valid PPPoE Active Discovery Offer (PADO) is received in response to a PPPoE Active Discovery Initiation (PADI) packet or if no valid PPPoE Active Discovery Session-confirmation (PADS) is received in response to a PPPoE Active Discovery Request (PADR) packet. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.63 |
aniDevTrapPPPoeSessionTerminateThis trap is sent out when a PPPoE Session is terminated. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.64 |
aniDevTrapEtherAutoNegotiateThis trap is sent out when device go back to auto-negotiate mode. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.65 |
aniDevTrapRadioInitErrorThis trap is sent out when the radio can't be initialized. Under an error condition this event will be generated prior to SU becoming operational. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.66 |
aniDevTrapMaxPowerErrorThis trap is sent out when when the radio board can't reach maximum configured power. This can be caused by a combination of faulty (or very long) coaxial cable connecting IDU and ODU and/or extremely hot weather or just bad calibration data on the radio board. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.67 |
aniDevTrapMaxPowerErrorClearThis trap is sent out when the event aniDevTrapMaxPowerError has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.68 |
aniDevTrapAgcTableNotCalibratedThis trap is sent out when the AGC Table is not calibrated. SODU platform relies on accurate calibration of the receive gain throughout the entire receive chain. If the table is not correctly calibrated or gets corrupted in the field, the SODU will have to fall back on default receive power adjustment algorithm, which may be far from optimal. This problem doesn't stop an SODU from getting operational but the downstream link quality can suffer. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.69 |
aniDevTrapFreqTableInvalidEntryThis trap is sent out whenever the frequency table contains an invalid entry. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.70 |
aniDevTrapHtmlUnzippedErrorThis trap is sent out when html compressed zip files are either missing or corrupted. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.71 |
aniDevTrapBootLineBackupUpdatedThis trap is sent out whenever the backup bootline parameters are updated to bring them in sync with the actual boot parameters. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.72 |
aniDevTrapBootLineRestoredFromBackupThis trap is sent out when the main bootline parameters are corrupted and the system has to fall back on backup boot parameters. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.73 |
aniDevTrapNvramBackupUpdatedThis trap is sent out whenever the backup copy of NVRAM configuration parameters is updated to bring them in sync with the actual NVRAM configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.74 |
aniDevTrapNvramRestoredFromBackupThis trap is sent out when the main NVRAM configuration data is corrupted and the system has to fall back on backup NVRAM configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.4325.2.10.0.75 |
aniDevTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.4325.2.10.1 |
aniDevControlTrapGenerationEnable or disable SNMP Trap Generation.rw Enumeration .1.3.6.1.4.1.4325.2.10.1.1 |