BSUSTATUS-MIB
AI MIB Summary
The BSUSTATUS-MIB monitors the operational status and radio interface states of Base Station Units (BSU) via the `aniBsuStatusRadioTable`, providing real-time visibility into individual radio connectivity and health metrics for cellular base station infrastructure.
This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU.
Main OID:
aniBsuStatus.1.3.6.1.4.1.4325.3.1
24
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
aniBsuStatusThis group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU. MODULE-IDENTITY .1.3.6.1.4.1.4325.3.1 |
aniBsuStatusBootStateShows the current state of the BSU.ro Enumeration .1.3.6.1.4.1.4325.3.1.1 |
aniBsuStatusSysUpTimeTime for which the system has been up and running, displayed as a string in 'days hours mins secs' format.ro DisplayString .1.3.6.1.4.1.4325.3.1.2 |
aniBsuStatusNumPortsConfThe number of wireless ports configured.ro INTEGER .1.3.6.1.4.1.4325.3.1.3 |
aniBsuStatusNumPortsPresentThe number of wireless ports actually available.ro INTEGER .1.3.6.1.4.1.4325.3.1.4 |
aniBsuStatusSuCountsThe total SUs linked to the BSU.ro INTEGER .1.3.6.1.4.1.4325.3.1.5 |
aniBsuStatusCellNameThe name of the Cell this BSU belongs to. When BSU is in point to point mode, this parameter is not applicable and will display an empty string. Similarly for PacketWave 750, this parameter is not applicable and will display an empty string.ro DisplayString .1.3.6.1.4.1.4325.3.1.6 |
aniBsuStatusCellRadiusThe Cell Radius in km. When BSU is in point to point mode, this object can be referred to as link distance.ro Enumeration .1.3.6.1.4.1.4325.3.1.7 |
aniBsuStatusSyncTimingRefThis flag shows whether timing reference is internal (1) or external (2) for this BSU. When BSU is running in point to point mode, this object is not-applicable. Similarly for PacketWave 750, this object is not-applicable.ro Enumeration .1.3.6.1.4.1.4325.3.1.8 |
aniBsuStatusRipFlagThis flag shows whether RIP is enabled(1) or disabled(2) for this BSU. This is always disabled when BSU is in bridge mode.ro Enumeration .1.3.6.1.4.1.4325.3.1.9 |
aniBsuStatusModeThe mode of the BSU.ro Enumeration .1.3.6.1.4.1.4325.3.1.10 |
aniBsuStatusRadioTableThis table shows the status of each radio that is connected to the BSU. The radio has to be operational for information to be displayed. The radio status is shown on a per wireless port basis. SEQUENCE OF AniBsuStatusRadioEntry .1.3.6.1.4.1.4325.3.1.11 |
aniBsuStatusRadioEntryAn entry with objects that provide information for each radio connected to the BSU. AniBsuStatusRadioEntry .1.3.6.1.4.1.4325.3.1.11.1 |
aniBsuStatusRadioSerialNumThe serial number of the radio board.ro DisplayString .1.3.6.1.4.1.4325.3.1.11.1.1 |
aniBsuStatusRadioFrequencyThe radio frequency in MHz.ro DisplayString UNITS "MHz" .1.3.6.1.4.1.4325.3.1.11.1.2 |
aniBsuStatusRadioBandThe radio frequency band.ro Enumeration .1.3.6.1.4.1.4325.3.1.11.1.3 |
aniBsuStatusRadioEepromRevThe radio EEPROM content revision number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4325.3.1.11.1.4 |
aniBsuStatusRadioVRFlagThe status of the voltage regulator.ro Enumeration .1.3.6.1.4.1.4325.3.1.11.1.5 |
aniBsuStatusRadioSynth1LockThe status of the radio synthesizer 1 lock.ro Enumeration .1.3.6.1.4.1.4325.3.1.11.1.6 |
aniBsuStatusRadioSynth2LockThe status of the radio synthesizer 1 lock.ro Enumeration .1.3.6.1.4.1.4325.3.1.11.1.7 |
aniBsuStatusRadioTxGainThe radio transmit gain in dB.ro DisplayString UNITS "dB" .1.3.6.1.4.1.4325.3.1.11.1.8 |
aniBsuStatusRadioRxGainThe radio receive gain in dB.ro Integer32 .1.3.6.1.4.1.4325.3.1.11.1.9 |
aniBsuStatusRadioCurrentTxMaxPowerThe radio current transmit maxium power in dBmro DisplayString UNITS "dBm" .1.3.6.1.4.1.4325.3.1.11.1.10 |
aniBsuStatusRadioIfCableLossThe calculated IF cable loss in dBro DisplayString UNITS "dB" .1.3.6.1.4.1.4325.3.1.11.1.11 |