BSUPARAM-MIB
The BSUPARAM-MIB module provides the management interface for configuring operational parameters and state variables on Brocade (now Broadcom) Brocade Storage Unit (BSU) devices. It enables administrators to monitor and adjust critical storage subsystem settings, including port configurations, buffer credits, and link status parameters, via SNMP.
Imported Objects
Objects
2 total| Object Name |
|---|
aniBsuParamThis group contains other configurable parameters for the BSU. MODULE-IDENTITY .1.3.6.1.4.1.4325.3.8 |
aniBsuDhcpParamSourceThis flag indicated the source of DHCP boot parameters for the BSU. This field is stored in the nvram and is updated using the CLI.ro Enumeration .1.3.6.1.4.1.4325.3.8.1 |
More MIBs from Ani
Browse all AniMIBs →SNMP MIB module
The DEVTRAPS-MIB defines the standard set of SNMP trap definitions used to notify network management systems of critical device events, such as link state changes, hardware failures, and system reboots. It serves as the foundational protocol interface for asynchronous alerting across generic network infrastructure devices, enabling real-time fault detection without requiring active polling.
Standard SNMP MIB module defining data structures for ANIROOT-MIB.
SNMP MIB module
The BSUSTATS-MIB module monitors RF port-level performance, bandwidth allocation, and signal quality metrics for Broadcom (formerly Enterasys) Broadband Service Units (BSUs). It provides specific counters for RF statistics, bandwidth groups, and signal quality tables to facilitate the analysis of cable modem termination system (CMTS) or DOCSIS network health.
The BSUSUSTATUS-MIB enables SNMP monitoring of BSU (Broadband Service Unit) hardware to track the operational state and link status of both upstream and downstream SU (Subscriber Unit) connections via dedicated status tables.