WS-TRAP-MIB
AI MIB Summary
The WS-TRAP-MIB module configures and controls the generation of SNMP notifications for Wireless LAN (WLAN) events by managing per-trap enable flags, module-level bulk controls, and a global trap suppression flag. It enables network administrators to selectively filter specific WLAN fault or status alerts while maintaining a master switch to suppress all wireless module notifications.
This MIB defines all the Traps that can occur within the WLAN module.
The following functionality is provided for Enabling/Disabling traps :
1. Each trap has a 'read-write' Enable 'Truth-Value' Flag
associated with it.
2. The Traps are organized in groups on a per module basis.
Each module has two 'doActionNow' variables to Enable & Disable ALL the traps within that module. Setting these variables directly changes the Enable Flags of all the traps within that module.
3. There is a Global Trap Enable 'Truth-Value' Flag which
determines whether any trap is sent out or not. Setting this variable does not affect the settings of the individual traps.
Main OID:
wsTrapMIB.1.3.6.1.4.1.388.14.5.1
222
Objects
Active
Status
12
Dependencies
Imported Objects
Objects
222 total| Object Name |
|---|
wsTrapMIBThis MIB defines all the Traps that can occur within the WLAN
module.
The following functionality is provided for Enabling/Disabling
traps :
1. Each trap has a 'read-write' Enable 'Truth-Value' Flag
associated with it.
2. The Traps are organized in groups on a per module basis.
Each module has two 'doActionNow' variables to Enable &
Disable ALL the traps within that module. Setting these
variables directly changes the Enable Flags of all the
traps within that module.
3. There is a Global Trap Enable 'Truth-Value' Flag which
determines whether any trap is sent out or not. Setting this
variable does not affect the settings of the individual traps. MODULE-IDENTITY .1.3.6.1.4.1.388.14.5.1 |
wsTrapSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.1 |
wsTrapSnmpColdStartAgent reinitialized; configuration may have changed.
Solution:
Not applicable.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.1.1 |
wsTrapEnableSnmpColdStartDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.1.2 |
wsTrapSnmpLinkDownNo connectivity on the port.
Solution:
Check if blade is properly inserted in the slot.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
Interface: [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.1.3 |
wsTrapEnableSnmpLinkDownDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.1.4 |
wsTrapSnmpLinkUpConnectivity on the port has been restored.
Solution:
Not Applicable.
Other Possibilities:
None.
Severity:
TP_SEV_NORM
Message:
Interface: [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.1.5 |
wsTrapEnableSnmpLinkUpDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.1.6 |
wsTrapSnmpAuthenticationFailThe SNMP user authentication failed.
Solution:
Check the user-id/password/community name.
Other Possibilities:
None.
Severity:
TP_SEV_CRIT NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.1.7 |
wsTrapEnableSnmpAuthFailDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.1.8 |
wsTrapEnableAllSnmpTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.1.9 |
wsTrapDisableAllSnmpTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.1.10 |
wsTrapSmtpNotifySnmpTrapEnable or disable e-mail notification of
SNMP related traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.1.11 |
wsTrapUpdSvr OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.2 |
wsTrapNsm OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.3 |
wsTrapNsmIfDescrDescription.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.3.1 |
wsTrapNsmIpAdEntAddrDescription.ro IpAddress .1.3.6.1.4.1.388.14.5.1.3.2 |
wsTrapNsmIpAdEntNetMaskDescription.ro IpAddress .1.3.6.1.4.1.388.14.5.1.3.3 |
wsTrapNsmDhcpIPChangedInterface IP Address assigned by DHCP has changed.
Solution:
If a different DHCP server assigned the IP address this time,
disable the unwanted server and restart the blade.
Other Possibilities:
Time may not be correctly set on the blade. If the current
time on the blade is significantly off from the time on the
DHCP server, the same DHCP server may assign a new IP address
when the lease is renewed.
Severity:
TP_SEV_NORM
Message:
Interface: [str], New IP: [str]/[uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.3.4 |
wsTrapEnableNsmDhcpIPChangedDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.3.5 |
wsTrapEnableAllNsmTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.3.6 |
wsTrapDisableAllNsmTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.3.7 |
wsTrapSmtpNotifyNsmTrapEnable or disable e-mail notification of
NSM traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.3.8 |
wsTrapDiag OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.4 |
wsTrapDiagTempHighTemperature greater than High limit.
Solution:
None.
Other Possibilities:
None.
Message:
Location: [str]; current temp = [uint], high temp = [uint] critical temp = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.1 |
wsTrapEnableDiagTempHighDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.2 |
wsTrapDiagTempOverTemperature greater than Critical limit.
Solution:
None.
Other Possibilities:
None.
Message:
Location: [str]; current temp = [uint], high temp = [uint] critical temp = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.3 |
wsTrapEnableDiagTempOverDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.4 |
wsTrapDiagFanSpeedLowFan speed lower than limit.
Solution:
None.
Other Possibilities:
None.
Message:
Name is [str] Current speed = [uint], Limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.5 |
wsTrapEnableDiagFanSpeedLowDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.6 |
wsTrapDiagResCpuLoad1MinCPU load in last minute averaged greater than limit.
Solution:
lower usage.
Other Possibilities:
None.
Message:
Current load = [uint], Limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.7 |
wsTrapEnableDiagResCpuLoad1MinDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.8 |
wsTrapDiagResCpuLoad5MinCPU load in last five minutes averaged greater than 5-minute limit.
Solution:
lower usage.
Other Possibilities:
None.
Message:
Current load = [uint], Limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.9 |
wsTrapEnableDiagResCpuLoad5MinDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.10 |
wsTrapDiagResCpuLoad15MinCPU load in last 15 minutes averaged greater than 15-minute limit.
Solution:
lower usage.
Other Possibilities:
None.
Message:
Current load = [uint], Limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.11 |
wsTrapEnableDiagResCpuLoad15MinDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.12 |
wsTrapDiagUsedKernBuffSizeDescription.ro Integer32 (32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768 | 65536 | 131072) .1.3.6.1.4.1.388.14.5.1.4.13 |
wsTrapDiagUsedKernBuffUsedDescription.ro Integer32 .1.3.6.1.4.1.388.14.5.1.4.14 |
wsTrapDiagUsedKernBuffLimitDescription.ro Integer32 .1.3.6.1.4.1.388.14.5.1.4.15 |
wsTrapDiagUsedKernBuffUsage of kernel buffer greater than limit for given size.
Solution:
defrag memory.
Other Possibilities:
None.
Message:
kernel buffer size = [uint], used = [uint], Limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.16 |
wsTrapEnableUsedKernBuffDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.17 |
wsTrapDiagRamFreeUsage of RAM greater than limit.
Solution:
None.
Other Possibilities:
None.
Message:
total = [uint], used = [uint], free = [uint], percent free ram = [uint], percent limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.18 |
wsTrapEnableDiagRamFreeDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.19 |
wsTrapDiagProcMemUsageMemory usage of given process greater than limit.
Solution:
None.
Other Possibilities:
None.
Message:
Process: [str]; percent mem = [uint], percent cpu = [uint] mem limit =[uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.20 |
wsTrapEnableDiagProcMemUsageDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.21 |
wsTrapDiagPktBufUsage of packet buffer greater than limit.
Solution:
None.
Other Possibilities:
None.
Message:
packet buffer allocated = [uint], used = [uint], limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.22 |
wsTrapEnableDiagPktBufDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.23 |
wsTrapDiagIpRouteCacheIP Route Cache too large.
Solution:
None.
Other Possibilities:
None.
Message:
ip route cache allocated = [uint], size = [uint], Limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.24 |
wsTrapEnableDiagIpRouteCacheDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.25 |
wsTrapDiagFileDescToo many file descriptors used.
Solution:
None.
Other Possibilities:
None.
Message:
fds in used = [uint], fd highwater = [uint], fd limit = [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.4.26 |
wsTrapEnableDiagFileDescDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.4.27 |
wsTrapEnableAllDiagTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.4.28 |
wsTrapDisableAllDiagTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.4.29 |
wsTrapSmtpNotifyDiagTrapEnable or disable e-mail notification of
Diagnostics traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.4.30 |
wsTrapCluster OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.5 |
wsTrapClusterMemberUpHeartbeats are getting exchanged with this member.
Solution:
None
Other Possibilities:
None.
Severity:
TP_SEV_NORM
Message:
Member: [ip], Redundancy group ID: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.1 |
wsTrapEnableClusterMemberUpDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.2 |
wsTrapClusterMemberDownNo longer able to see this member.
Solution:
1.The member may be rebooted.
2. Check that the member is reachable via network using ping.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Member: [ip], Redundancy group ID: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.3 |
wsTrapEnableClusterMemberDownDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.4 |
wsTrapClusterMemberMisConfiguredThe member cluster parameter is not sync with this switch.
Solution:
Check all the cluster parameters are configured same in
both switches. (For ex - heartbeat interval, discovery interval,
cluster id, hold interval etc.)
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Member: [ip], Redundancy group ID: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.5 |
wsTrapEnableClusterMemberMisConfigDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.6 |
wsTrapClusterAdoptionExceededAll switches in this cluster adopted more access ports than the cluster license.
Solution:
1. It is a transient condition, but it will converge back
to normal.
2. Remove excess of ports from the network.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Redundancy group ID: [uint], Adoption count: [uint], Group Authorization level: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.7 |
wsTrapEnableClusterAdoptionExceededDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.8 |
wsTrapClusterLicenseChangedCluster license has been changed. It may either be decreased
or increased.
Solution:
Decrease in cluster license may be because of license
downgrade happened.
Other Possibilities:
None.
Message:
Redundancy group ID: [uint], Group Authorization level: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.9 |
wsTrapEnableClusterLicChangedDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.10 |
wsTrapEnableAllClusterTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.5.11 |
wsTrapDisableAllClusterTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.5.12 |
wsTrapCriticalResourceUpThe critical-resource (gateway ) is up.
Solution:
None
Other Possibilities:
None. NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.13 |
wsTrapEnableCriticalResourceUpEnable this to get the trap when the critical-resource(gateway) is up.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.14 |
wsTrapCriticalResourceDownThe critical-resource (gateway ) is down.
Solution:
Check the connectivity between the gateway and wireless switch.
Try pinging to the gateway to check it's connectivity.
Other Possibilities:
None. NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.5.15 |
wsTrapEnableCriticalResourceDownEnable this to get the trap when the critical-resource(gateway) is down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.5.16 |
wsTrapSmtpNotifyClusterTrapEnable or disable e-mail notification of
Cluster traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.5.17 |
wsTrapMisc OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.6 |
wsTrapMiscLowFileSystemSpaceLow free space on one of the monitored file systems.
Solution:
Remove some files from that file system.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
[str] File System - Free space: [uint] is lower than limit: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.1 |
wsTrapEnableMiscLowFileSystemSpaceDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.2 |
wsTrapMiscProcessMaxRestartsReachedThe max restart count of this process by the Process Monitor
has been reached.
Solution:
Please contact technical support.
Other Possibilities:
None.
Severity:
TP_SEV_CRIT
Message:
Process Name: [str], Max Restart Count: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.3 |
wsTrapEnableMiscProcMaxRestartDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.4 |
wsTrapMiscSavedConfigModifiedA trap generated when the command 'write mem' is run from the CLI to save the modified config.
Solution:
Not applicable.
Other Possibilities:
None. NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.5 |
wsTrapEnableMiscSavedConfigModifiedA scalar for enabling the trap wsTrapMiscSavedConfigModified to be sent by the SNMP agent on the switch.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.6 |
wsTrapMiscServerCertExpiredServer certificate Expired.
Solution:
Install a valid server certificate.
Other Possibilities:
None.
Severity:
TP_SEV_CRIT
Message:
server certificate expired for the trustpoint [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.7 |
wsTrapEnableMiscServerCertExpiredDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.8 |
wsTrapMiscCaCertExpiredCa certificate Expired
Solution:
Install a valid ca certificate.
Other Possibilities:
None.
Severity:
TP_SEV_CRIT
Message:
ca certificate expired for the trustpoint [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.9 |
wsTrapEnableMiscCaCertExpiredDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.10 |
wsTrapEnableAllMiscTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.6.11 |
wsTrapDisableAllMiscTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.6.12 |
wsTrapMiscPeriodicHeartbeatThis trap/heartbeat shall be triggered only if no other SNMP
Trap was sent by that switch in the specified time frame.
Solution:
None.
Other Possibilities:
None.
Severity:
TP_SEV_INFO
Message:
periodic heartbeat from the switch NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.13 |
wsTrapEnableMiscPeriodicHeartbeatEnable the periodic system heartbeat trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.14 |
wsTrapMiscSwitchEventAn AP or switch related event. This could be one of
the following-
AP shut down alarm
AP channel configuration is changed
Interference on current channel is detected
Radius authentication server is unreachable/unavailable/unconnected
Radius accounting server cannot be connected
Solution:
None.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
other important events from the switch network element ID: [str] event : [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.6.15 |
wsTrapEnableMiscSwitchEventEnable the miscellaneous switch event notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.6.16 |
wsTrapSmtpNotifyMiscTrapEnable or disable e-mail notification of
Miscellaneous traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.6.17 |
wsTrapWireless OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7 |
wsTrapWirelessStation OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.1 |
wsTrapWirelessStationMacDescription.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.1 |
wsTrapWirelessStationRadioNumDescription.ro Integer32 .1.3.6.1.4.1.388.14.5.1.7.1.2 |
wsTrapWirelessStationLimitOnRadioDescription.ro Integer32 .1.3.6.1.4.1.388.14.5.1.7.1.3 |
wsTrapWirelessStationAssociatedA station has associated to the wlan controller.
Solution:
If this is not an authorized station, add it to the
Access Control List or increase your wireless security.
Other Possibilities:
None.
Severity:
TP_SEV_NORM
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.4 |
wsTrapEnableWirelessStationAssocDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.5 |
wsTrapWirelessStationDisassociatedA station has disassociated from the wlan controller.
Solution:
Make sure your station is powered on and within the
service area of the wlan controller.
Other Possibilities:
The station may not have the correct credentials to
associate to the wlan.
Severity:
TP_SEV_NORM
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.6 |
wsTrapEnableWirelessStationDisAssocDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.7 |
wsTrapWirelessStationDeniedAssociationOnCapabilityThe station was denied association due to conflicts
in the 802.11 capabilities field.
Solution:
The station needs to be updated to support the correct
capability fields.
Other Possibilities:
None.
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.8 |
wsTrapEnableWirelessStationDenAssocOnCapDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.9 |
wsTrapWirelessStationDeniedAssociationOnShortPreambleThe station was denied association because it does not
support short preamble.
Solution:
Turn off short preamble on the wlan or update the
station so it can support short preamble.
Other Possibilities:
None.
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.10 |
wsTrapEnableWirelessStationDenAssocOnShortPmblDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.11 |
wsTrapWirelessStationDeniedAssociationOnSpectrumThe station was denied association because it does not
support spectrum magagement.
Solution:
The country and channel of operation require spectrum
management on stations. Update your station or try a
different channel.
Other Possibilities:
None.
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.12 |
wsTrapEnableWirelessStationDenAssocOnSpectrumDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.13 |
wsTrapWirelessStationDeniedAssociationOnErrThe station was denied association because the 802.11
packet was malformed.
Solution:
Check your station hardware and software for errors.
Other Possibilities:
Interference or a cracking attempt.
Severity:
TP_SEV_WARN
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.14 |
wsTrapEnableWirelessStationDenAssocOnErrDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.15 |
wsTrapWirelessStationDeniedAssociationOnSSIDThe station was denied association because the SSID
supplied by the MU was too large.
Solution:
Check your MU software. It appears to be sending a
malformed association request.
Other Possibilities:
Interference or a cracking attempt.
Severity:
TP_SEV_WARN
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.16 |
wsTrapEnableWirelessStationDenAssocOnSSIDDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.17 |
wsTrapWirelessStationDeniedAssociationOnRatesThe station was denied association because it does not
support the rates required.
Solution:
Reduce the supported rate set on the radio or update
the radio on the station to support the required rates.
Other Possibilities:
None.
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.18 |
wsTrapEnableWirelessStationDenAssocOnRatesDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.19 |
wsTrapWirelessStationDeniedAssociationOnInvalidWPAThe station was denied association because it did not
send a WPA/WPA2 element.
Solution:
Ensure the station supports WPA/WPA2 or turn off
WPA/WPA2.
Other Possibilities:
None.
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.20 |
wsTrapEnableWirelessStationDenAssocOnInvalidWPADescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.21 |
wsTrapWirelessStationDeniedAssociationAsPortCapacityReachedThe station was denied association because the radio
it was attempting to associate to has reached its
station limit.
Solution:
Increase the number of stations that can associate to
the radio or increase radio density to allow for more
stations.
Other Possibilities:
None.
Message:
Station: [mac], radio: [uint], maximum Station: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.22 |
wsTrapEnableWirelessStationDenAssocAsPortCapReachedDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.23 |
wsTrapWirelessStationTkipCounterMeasuresThere have been 2 or more TKIP MIC checksum failures
in the last 60 seconds, as a result that Wireless Lan
has been disabled for 60 seconds. MIC failures can
occur either because someone is trying to attack the
network and guess your TKIP keys, or because of some
stations that have drivers that generate invalid
frames.
Solution:
View the system logs to see which wireless station is
generating these MIC failures. If it is on your network,
then take that station off the network for now.
Contact support.
Other Possibilities:
If your network is setup for eap authentication with
TKIP encryption, and there are frequent
reauthentications, MIC failures can occur. If this is
the case, try reducing the frequency of
re-authentications, and see if it helps with the
countermeasures. Again see if the failures are caused
by one particular station.
Severity:
TP_SEV_WARN
Message:
Activated NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.24 |
wsTrapEnableWirelessStationTkipCntMeasuresDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.25 |
wsTrapWirelessStationDeniedAuthenticationThe station was denied authentication due to the
maximum number of stations being reached for the
controller.
Solution:
Add another controller to you network or reduce the
number of stations.
Other Possibilities:
The authentication algorithm being used by the WLAN
is not supported by the station or a malformed auth
packet from the station.
Severity:
TP_SEV_MAJOR
Message:
Station: [mac] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.26 |
wsTrapEnableWirelessStationDenAuthDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.27 |
wsTrapWirelessStationRadiusAuthFailedThe station was denied access to the wlan because
Radius authentication failed.
Solution:
Check radius server connectivity and the stations
username/password.
Other Possibilities:
None
Severity:
TP_SEV_MAJOR
Message:
Station: [mac], radio: [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.28 |
wsTrapEnableWirelessStationRadAuthFailDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.29 |
wsTrapEnableAllWirelessStationTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.1.30 |
wsTrapDisableAllWirelessStationTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.1.31 |
wsTrapWirelessStationVlanChangedStation's vlan id is changed.
Solution:
Check IP connectivity with Peer IP-address.
Other Possibilities:
None.
Message:
Station: [mac], assigned with new vlan id:[uint] on wlan :[uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.1.32 |
wsTrapEnableWirelessStationVlanChangedEnable the trap for station VLAN changerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.1.33 |
wsTrapSmtpNotifyWirelessStationTrapEnable or disable e-mail notification of
Wireless Station traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.1.34 |
wsTrapWirelessRadio OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.2 |
wsTrapWirelessRadioNameDescription.ro OCTET STRING .1.3.6.1.4.1.388.14.5.1.7.2.1 |
wsTrapWirelessRadioChannelNumDescription.ro Unsigned32 .1.3.6.1.4.1.388.14.5.1.7.2.2 |
wsTrapWirelessAPMacDescription.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.2.3 |
wsTrapWirelessRadioAdoptedA radio was adopted by the wlan controller.
Solution:
If this is not a authorized station, turn off
adopt-unconf-radio
Other Possibilities:
None.
Severity:
TP_SEV_NORM
Message:
Radio [str], on Radio-Port [mac] at AP IP Address [ip] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.2.4 |
wsTrapEnableWirelessRadioAdoptedDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.2.5 |
wsTrapWirelessRadioUnadoptedA radio was un-adopted from the wlan controller.
Solution:
Check network connectivity between the controller and
radio port.
Other Possibilities:
The radio was removed or reconfigured.
Message:
Radio [str] on Radio-Port [mac] at AP IP Address [ip] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.2.6 |
wsTrapEnableWirelessRadioUnadoptedDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.2.7 |
wsTrapWirelessRadioDetectedRadarA radio detected radar on its channel of operation and
is switching channels.
Solution:
Retry the channel later.
Other Possibilities:
Interference.
Severity:
TP_SEV_WARN
Message:
Radio [str] on Radio-Port [mac], channel [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.2.8 |
wsTrapEnableWirelessRadioDetectedRadarDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.2.9 |
wsTrapEnableAllWirelessRadioTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.2.10 |
wsTrapDisableAllWirelessRadioTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.2.11 |
wsTrapSmtpNotifyWirelessRadioTrapEnable or disable e-mail notification of
Wireless Radio traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.2.12 |
wsTrapWirelessAPIpAddressIp address of parent AP.ro IpAddress .1.3.6.1.4.1.388.14.5.1.7.2.13 |
wsTrapWirelessUnapprovedAP OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.3 |
wsTrapWirelessUnapprovedAPDetectedAn external, unapproved AP was detected in the
vicinity of your wlan.
Solution:
Add the unapproved AP to the approved list or remove
the unapproved AP.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
AP [mac], Radio [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.3.1 |
wsTrapEnableWirelessUnapprovedAPDetectedDescription.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.3.2 |
wsTrapEnableAllWirelessUnapprovedAPTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.3.3 |
wsTrapDisableAllWirelessUnapprovedAPTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.3.4 |
wsTrapWirelessUnapprovedAPRemovedAn external, unapproved AP was removed
Solution:
The unapproved AP was added to the approved list or removed
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
AP [mac], Radio [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.3.5 |
wsTrapEnableWirelessUnapprovedAPRemovedEnable wireless unapproved Ap removed traprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.3.6 |
wsTrapSmtpNotifyWirelessUnapprovedAPTrapEnable or disable e-mail notification of
Wireless Unapproved AP traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.3.7 |
wsTrapWirelessSelfHeal OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.4 |
wsTrapWirelessSelfHealActivateThis radio is attempting to cover for a neighboring AP that
is down.
Solution:
1. Verify that the neighboring AP is still adopted.
2. Verify that there are no physical obstructions between
the down AP and other APs.
Other Possibilities:
1. The neighboring AP may have a physical obstruction or has
become unadopted.
2. Mis-configuration. Set the healing AP and the down AP to
not be neighbors.
Message:
Activated NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.4.1 |
wsTrapEnableWirelessSelfHealActivateTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.4.2 |
wsTrapEnableAllWirelessSelfHealTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.4.3 |
wsTrapDisableAllWirelessSelfHealTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.4.4 |
wsTrapSmtpNotifyWirelessSelfHealTrapEnable or disable e-mail notification of
Wireless Self Healing traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.4.5 |
wsTrapWirelessIds OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.5 |
wsTrapWirelessIdsMuEventThe number of requests from the MU has exceeded the
configured threshold for the violation type. The MU
is being filtered for the configured number of seconds.
Solution:
This may be indicative of an attack on your wireless LAN.
If the MU is one of your own, it may be experiencing problems.
Other Possibilities:
The threshold may be set too low, make it higher.
Severity:
TP_SEV_WARN NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.5.1 |
wsTrapEnableWirelessIdsMuEventTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.5.2 |
wsTrapWirelessIdsRadioEventThe number of requests from the radio has exceeded the
configured threshold for the violation type. The radio
is being filtered for the configured number of seconds.
Solution:
This may be indicative of an attack on your wireless LAN.
If the radio is one of your own, it may be experiencing problems.
Other Possibilities:
The threshold may be set too low, make it higher.
Severity:
TP_SEV_WARN NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.5.3 |
wsTrapEnableWirelessIdsRadioEventTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.5.4 |
wsTrapWirelessIdsSwitchEventThe number of requests from the switch has exceeded the
configured threshold for the violation type. The switch
is being filtered for the configured number of seconds.
Solution:
This may be indicative of an attack on your wireless LAN.
If the switch is one of your own, it may be experiencing problems.
Other Possibilities:
The threshold may be set too low, make it higher.
Severity:
TP_SEV_WARN NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.5.5 |
wsTrapEnableWirelessIdsSwitchEventTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.5.6 |
wsTrapEnableAllWirelessIdsTrapDescription.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.5.7 |
wsTrapDisableAllWirelessIdsTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.5.8 |
wsTrapSmtpNotifyWirelessIdsTrapEnable or disable e-mail notification of
Wireless IDS traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.5.9 |
wsTrapWirelessStat OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.6 |
wsTrapWirelessStatWlanNameTo be added.ro OCTET STRING .1.3.6.1.4.1.388.14.5.1.7.6.1 |
wsTrapWirelessStatMuIPAddrTo be added.ro IpAddress .1.3.6.1.4.1.388.14.5.1.7.6.2 |
wsTrapWirelessStatPortalMacTo be added.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.6.3 |
wsTrapWirelessStatStationThis trap is generated when the user set values are
violated for the station.
Solution:
Check the stations for proper operation.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Threshold [str], value [str] [str], Station [mac], Station [ip] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.6.4 |
wsTrapWirelessStatRadioThis trap is generated when the user set values are violated
for the radio.
Solution:
Check the stations for proper operation.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Threshold [str], value [str] [str], Radio index [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.6.6 |
wsTrapWirelessStatWlanThis trap is generated when the user set values are violated
for the wlan.
Solution:
Check the wlan for proper operation.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Threshold [str], value [str] [str], WLAN index [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.6.8 |
wsTrapWirelessStatModuleThis trap is generated when the user set values are violated
for the wlan-module.
Solution:
Check the wlan-module for proper operation.
Other Possibilities:
None.
Severity:
TP_SEV_WARN
Message:
Threshold [str], value [str] [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.6.10 |
wsTrapSmtpNotifyWirelessStatModuleEnable or disable e-mail notification of
Wireless Statistics traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.6.11 |
wsTrapEnableAllWirelessTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.7 |
wsTrapDisableAllWirelessTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.8 |
wsTrapWirelessWlan OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.7.9 |
wsTrapWirelessWlanVlanUserLimitReachedThe limit on the number of users on the specified VLAN of the
specified WLAN has been reached. Future association will not be
assigned to this VLAN.
Solution:
Increase the limit on the number of users for that VLAN/WLAN.
Other Possibilities:
Assign more VLANs to that WLAN.
Message:
wlan [uint], vlan [uint] reached user limit [uint] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.9.1 |
wsTrapEnableWirelessWlanVlanUserLimitEnable or disable the WLAN VLAN User Limit Reached Trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.9.2 |
wsTrapWirelessWlanWebPortalUnreachableWeb-Portal server can not be reached from this device.
Solution:
Configure the route on this device and route configuration
on intermediate routers so that web-portal is reachable
from this device. Check to make sure the web-portal server
is powered on.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
WLAN index [int], Hotspot page URL [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.9.3 |
wsTrapEnableWirelessWlanWebPortalUnreachableEnable/Disable web-portal server unreachable trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.9.4 |
wsTrapWirelessWlanWebPortalUnavailableWeb-Portal server is not available to provide
web-server service.
Solution:
Start web-portal server service.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
WLAN index [int], Hotspot page URL [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.9.5 |
wsTrapEnableWirelessWlanWebPortalUnavailableEnable/Disable web-portal server unavailable trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.9.6 |
wsTrapWirelessWlanWebPortalUnconnectedWeb-Portal server is down from service.
Solution:
Re-start the web-portal service.
Other Possibilities:
None.
Severity:
TP_SEV_MAJOR
Message:
WLAN index [int], Hotspot page URL [str] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.7.9.7 |
wsTrapEnableWirelessWlanWebPortalUnconnectedEnable/Disable web-portal server unconnected trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.7.9.8 |
wsTrapEnableAllWirelessWlanTrapEnable all Wireless Wlan traps.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.9.9 |
wsTrapDisableAllWirelessWlanTrapDisable all Wireless Wlan traps.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.7.9.10 |
wsTrapSmtpNotifyWirelessWlanTrapEnable or disable e-mail notification of
Wireless WLAN traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.7.9.11 |
wsTrapMobility OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.8 |
wsTrapMobilityOperUpMobility is operationally UP.
Solution:
None
Other Possibilities:
None. NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.8.1 |
wsTrapEnableMobilityOperUpTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.8.2 |
wsTrapMobilityOperDownMobility is operationally DOWN.
Solution:
None
Other Possibilities:
None. NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.8.3 |
wsTrapEnableMobilityOperDownTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.8.4 |
wsTrapMobilityPeerUpMobility Peer is UP.
Solution:
None
Other Possibilities:
None.
Message:
Peer: [ip] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.8.5 |
wsTrapEnableMobilityPeerUpTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.8.6 |
wsTrapMobilityPeerDownMobility Peer is DOWN.
Solution:
Check IP connectivity with Peer IP-address.
Other Possibilities:
None.
Message:
Peer: [ip] NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.8.7 |
wsTrapEnableMobilityPeerDownTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.8.8 |
wsTrapEnableAllMobilityTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.8.9 |
wsTrapDisableAllMobilityTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.8.10 |
wsTrapSmtpNotifyMobilityTrapEnable or disable e-mail notification of
Mobility traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.8.11 |
wsSwTrapDHCPServer OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.9 |
wsTrapDHCPServerStartedDHCP Server is UP.
Solution:
None
Other Possibilities:
None.
Message:
Started NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.9.1 |
wsTrapEnableDHCPServerStartedTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.9.2 |
wsTrapDHCPServerStoppedDHCP Server is Down.
Solution:
None
Other Possibilities:
None.
Message:
Stopped NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.9.3 |
wsTrapEnableDHCPServerStoppedTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.9.4 |
wsTrapEnableAllDHCPServerTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.9.5 |
wsTrapDisableAllDHCPServerTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.9.6 |
wsTrapSmtpNotifyDHCPServerTrapEnable or disable e-mail notification of
DHCP Server traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.9.7 |
wsSwTrapRadiusServer OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.1.10 |
wsTrapRadiusServerStartedRadius Server is UP.
Solution:
None
Other Possibilities:
None.
Message:
Started NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.10.1 |
wsTrapEnableRadiusServerStartedTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.10.2 |
wsTrapRadiusServerStoppedRadius Server is Down.
Solution:
None
Other Possibilities:
None.
Message:
Stopped NOTIFICATION-TYPE .1.3.6.1.4.1.388.14.5.1.10.3 |
wsTrapEnableRadiusServerStoppedTo be added.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.10.4 |
wsTrapEnableAllRadiusServerTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.10.5 |
wsTrapDisableAllRadiusServerTrapTo be added.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.10.6 |
wsTrapSmtpNotifyRadiusServerTrapEnable or disable e-mail notification of
Radius Server traps.
Please see the definition of SmtpNotifyBitMap for
the usage of this field.rw SmtpNotifyBitMap (WS-TYPE-MIB) .1.3.6.1.4.1.388.14.5.1.10.7 |
wsTrapEnableAllTrapEnables trap flags for all the traps
applicable to the system.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.11 |
wsTrapDisableAllTrapDisables trap flags for all the traps
applicable to the system.rw DoActionNow .1.3.6.1.4.1.388.14.5.1.12 |
wsTrapGlobalEnableFlagThis is a global variable which determines whether to send
(or not) any of the system trap.
When this flag is set to 'true', all the traps which are
enabled and have their trap condition met are sent out.
When this flag is set to 'false', no trap is sent out even if
its own flag is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.388.14.5.1.13 |
wsTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.100 |
wsTrapCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.100.1 |
wsNotificationGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.100.2 |
wsTrapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.388.14.5.100.3 |